Tender is - City of

Returnable Documents:

• Gearbox model • Drawing showing gearbox general arrangement • Gearbox rated power output • Gearbox service factor • Motor rated output 3. If the tenderer is the Engineering Manufacturer (OEM) or Agent for the equipment, the tenderer must submit the following: • A letter from the Agent of the OEM stating that the tenderer is the Agent in South Africa or OEM for the equipment offered. If the tenderer is not the Agent or OEM for the equipment, the tenderer must submit either of the following in addition to the OEM letter to Agent above: • The quotation of the equipment obtained from the Agent/OEM clearly addressed to the tenderer and stating the date and the rate of exchange that the quotation is based for imported contents. OR A letter from the Agent/OEM clearly addressed to the tenderer stating the date that the tenderer has obtained a quotation from the Agent/OEM AND stating the rate of exchange that the quotation is based on, for imported contents. 5. A copy of the ISO 9001 certification for the manufacture of gearbox by the manufacturer. 6 The Tender’s company bank rating of C with the minimum value of R 2 500 000. STAGE 3: TECHNICAL EVALUATION. The technical evaluation will be conducted by reviewing the following information provided: • Information given in schedule of particulars and requirements as stated in clause 3.1.2.3 are compliant with specifications. • The information given in mandatory requirements item 2 with regards to the specification requirements have been met. Tenders that do not meet the technical requirements will not be considered further. 5.3 STAGE 4: PREFERENCE POINT SYSTEM The preferential points to be used for evaluation will be the 80/20 points system in terms of the Preferential Procurement Policy Framework Act, 2000 (Act ) Regulations 2022. • 80 points for price • 20 Specific Goals SPECIFIC GOALS 1) Bidders are required to submit supporting documents for their bids to claim the specific goal points. 2) Non-compliance with specific goals will not lead to disqualification but bidders will not be allocated specific goal points. Bidders will score points out of 80 for price only and zero (0) points out of 20 for specific goals. 3) Cot shall act against any bidder or person when it detects that the specific goals were claimed or obtained on a fraudulent basis. The specific goal for this bid is outlined below. Specific goals 80/20 preference Proof of specific goals to be submitted point system BB-BEE score of companies Valid Certified copy of BBBEE • Level 1 8 Points certificate. Sworn Affidavit for • Level 2 BBBEE qualifying small • Level 3 7 Points enterprise or Exempt Micro • Level 4 Enterprises or CIPC BBBEE 6 Points • Level 5 certificate. • Level 6 5 Points • Level 7 • Level 8 4 Points • Non-compliant 3 Points 2 Points 1 Point 0 Points EME and/ or QSE 2 Points Valid Sworn affidavit for B- BBEE qualifying small enterprise or Exempt Micro Enterprises or CIPC BBBEE certificate At least 51% of Women- 2 Points Certified copy of Identity owned companies Document/s and proof of ownership (Sworn affidavit for B-BBEE qualifying small enterprise or Exempt Micro Enterprises, CIPC registration or any other proof of ownership) At least 51% owned 2 Points Medical Certificate with companies by People with doctor’s details (Practice disability Number, Physical Address, and contact numbers) and proof of ownership (Sworn affidavit for B-BBEE qualifying small enterprise or Exempt Micro Enterprises, CIPC registration or any other proof of ownership At least 51% owned 2 Point Certified copy of Identity companies by Youth Document/s and proof of ownership (Sworn affidavit for B-BBEE qualifying small enterprise or Exempt Micro Enterprises, CIPC registration or any other proof of ownership Local Economic Municipal Account Participation statement/Lease agreement. • City of Tshwane 4 Points • Gauteng 2 Points • National 1 Point 6. VALIDITY PERIOD The validity period for the tender after closure is 90 days. CoT shall have right and power to extent any tender validity period beyond any initial validity period set and subsequent extensions. SCM shall ensure that an extension of validity is requested in writing from all bidders before the validity expiry date. Extension of validity shall be finalised while the quotations/bids are still valid. 7. SCHEDULE OF PARTICULARS AND REQUIREMENTS (NB: THIS FORM MUST BE COMPLETED AND SIGNED BY THE TENDERER) ITEM 1: Gearbox and motor 90 kW Unit Specified Offered GEARBOX Country of manufacture state Manufacturer state Model state Rated output power kW 90 Output torque at rated power output Nm State Output rotational speed rpm 40 (+-2) IP rating IP55 or higher Reduction ratio state Service factor on maximum installed 2 or greater power L 10 bearing life hours hrs 100 000 or greater MOTOR Motor make State IP rating IP55 or higher Energy efficiency rating IE3 Rated power kW kW 90 Number of poles No. 4 Speed at 50 Hz rpm State Compliance with SANS IEC 60034 Yes SIGNATURE OF TENDERER: ............................................................. ITEM 2: Gearbox and motor 75 kW Unit Specified Offered GEARBOX Country of manufacture state Manufacturer state Model state Rated output power kW 75 Output torque at rated power output Nm State Output rotational speed rpm 53 (+-2.65) IP rating IP55 or higher Reduction ratio state Service factor on maximum installed 2 or greater power L 10 bearing life hours hrs 100 000 or greater MOTOR Motor make State IP rating IP55 or higher Energy efficiency rating IE3 Rated power kW kW 75 Number of poles No. 4 Speed at 50 Hz rpm state Compliance with SANS IEC 60034 Yes SIGNATURE OF TENDERER: ............................................................. ITEM 3: Gearbox and motor 75 kW Unit Specified Offered GEARBOX Country of manufacture state Manufacturer state Model state Rated output power kW 75 Output torque at rated power output Nm State Output rotational speed rpm 42 (+-2.1) IP rating IP55 or higher Reduction ratio state Service factor on maximum installed 2 or greater power L 10 bearing life hours hrs 100 000 or greater MOTOR Motor make state IP rating IP55 or higher Energy efficiency rating IE3 Rated power kW kW 90 Number of poles No. 4 Speed at 50 Hz rpm state Compliance with SANS IEC 60034 Yes SIGNATURE OF TENDERER: ............................................................. ITEM 4: Gearbox and motor 75 kW Unit Specified Offered GEARBOX Country of manufacture state Manufacturer state Model state Rated output power kW 75 Output torque at rated power output Nm state Output rotational speed rpm 37 (+-1.85) IP rating IP55 or higher Reduction ratio state Service factor on maximum installed 2 or greater power L 10 bearing life hours hrs 100 000 or greater MOTOR Motor make State IP rating IP55 or higher Energy efficiency rating IE3 Rated power kW kW 75 Number of poles No. 4 Speed at 50 Hz rpm state Compliance with SANS IEC 60034 Yes SIGNATURE OF TENDERER: ............................................................. ITEM 5: Gearbox and motor 55 kW Unit Specified Offered GEARBOX Country of manufacture state Manufacturer state Model state Rated output power kW 55 Output torque at rated power output Nm state Output rotational speed rpm 41 (+-2.05) IP rating IP55 or higher Reduction ratio state Service factor on maximum installed 2 or greater power L 10 bearing life hours hrs 100 000 or greater MOTOR Motor make state IP rating IP55 or higher Energy efficiency rating IE3 Rated power kW kW 55 Number of poles No. 4 Speed at 50 Hz rpm state Compliance with SANS IEC 60034 Yes SIGNATURE OF TENDERER: ............................................................. ITEM 6: Gearbox and motor 45 kW Unit Specified Offered GEARBOX Country of manufacture state Manufacturer state Model state Rated output power kW 45 Output torque at rated power output Nm state Output rotational speed rpm 41 (+-2.05) IP rating IP55 or higher Reduction ratio state Service factor on maximum installed 2 or greater power L 10 bearing life hours hrs 100 000 or greater MOTOR Motor make State IP rating IP55 or higher Energy efficiency rating IE3 Rated power kW kW 45 Number of poles No. 4 Speed at 50 Hz rpm state Compliance with SANS IEC 60034 Yes SIGNATURE OF TENDERER: .............................................................

No specific requirements found B-BBEE Minimum Level: 1