Remove and dispose asbestos roof sheets, fascia and barge boards forhouse refurbishment at grootdraai dam near standerton town in mpumalanga province, CIDB contractor grading designation of CIDB 2gb

{"name":"Mr D Mongwe","email":"[email protected]","phone":"083 600 5718","department":"OF WATER AND SANITATION","address":"ANDERTON TOWN IN"}

Mpumalanga province, CIDB contractor grading designation of CIDB 2gb.

the following shall apply:

3.1 A. Specification

• Contractors’ responsibility to notify Department of Labour Seven (7) days before work commences on site
• Contractor MUST OBTAIN approved air monitoring work plan from the Department of Labour approved

air monitoring authority

• The AIA MUST do air samples during the removal process and after to confirm asbestos has been

removed.

• Contractor must compile a full report for samples that have been taken and a report and clearance

certificate for air monitoring must be given to the Department of Water and Sanitation – Construction East.

5. Use of contract documents and information; inspection

CIDB grading/category: 2GB

Contractor grading designation of CIDB 2gb

Tax compliance central supplier

Tax compliance status

Tax compliance requirements

Tax compliance status (tcs) pin may be made via e-filing through the SARS website

Csd number

CSD Report

CSD Report for each bidder who formed a (JV)

Central supplier database (csd), a csd number

Central Supplier Database

2. Tax compliance requirements

2.3 Application for tax compliance status (tcs) pin may be made via e-filing through the SARS website

Separate tcs certificate / pin / csd number.

2.6 Where NO tcs is available but the bidder is registered on the central supplier database (csd), a csd number

VAT registration number

Supplier compliance tax compliance central supplier

If the answer is “NO” to all of the above, then IT is not a requirement to register for a tax compliance status

B-BBEE Minimum Level: 1

Points Allocation: 80 points

B-BBEE Details: TON 2430

Bidding procedure enquiries may be directed to technical enquiries may be directed to:

CONTACT PERSON Mr D Mongwe CONTACT PERSON Mr: S Ndlovu

Telephone number 083 600 5718 telephone number 060 980 5896

Facsimile number facsimile number n/a

E-MAIL ADDRESS [email protected] E-MAIL ADDRESS [email protected]

Supplier information

Name of bidder

Postal address

Street address

Telephone number code number

Cellp hone number

Facsimile number code number

E-mail address

VAT registration number

Supplier compliance tax compliance central supplier

ORSTATUS SYSTEM PIN: DATABASE No: MAAA

B-bbee status level tick applicable box] b-bbee status level sworn [tick applicable box]

Verification certificate affidavit

Yes No Yes No

[A B-BBEE STATUS LEVEL VERIFICATION CERTIFICATE/ SWORN AFFIDAVIT (FOR EMES & QSEs) MUST BE SUBMITTED IN

Order to qualify for preference points for b-bbee]

Are you the accredited

Are you a foreign based supplier

REPRESENTATIVE IN Yes No

FOR THE SOUTH AFRICA FOR Yes No

Goods/service/works

The goods [if yes, answer part

Offered?

/Services /works [if yes enclose proof] b:3 ]

Offered?

Questionnaire to bidding foreign suppliers

Is the entity a resident of the republic of south africa (RSA)? yes NO

Does the entity have a branch in the RSA? yes NO

Does the entity have a permanent establishment in the RSA? yes NO

Does the entity have any source of income in the RSA? yes NO

Is the entity liable in the RSA for any form of taxation? Yes NO

If the answer is “NO” to all of the above, then IT is not a requirement to register for a tax compliance status

System pin code from the south african revenue service (SARS) and if not register as per 2.3 Below.

3.

Part b

Terms and conditions for bidding

1. Bid submission:

1.1. Bids must be submitted

(a) The bid must be signed on the Invitation to Bid form (SBD 1) annexed hereto with all blanks in the bid and the

appendix filled in.

(b) All spaces in the bid forms and other annexures shall be completed in full.

(c) Section 3 in the bid document and the Pricing Schedule must be fully completed and priced out by the

bidder.

(d) The bid documents shall not be separated in any way, nor must any pages be detached from the original

documents.

(a) The original Bid, together with a cover letter and supporting documents, shall be sealed in an envelope endorsed:

“Original Bid: WTE 1006 CE: REMOVE AND DISPOSE ASBESTOS ROOF SHEETS, FASCIA AND BARGE BOARDS FOR

contribution from level 1 to 2 3

which are QSE or EME

Total scored points 20

10.

Specific goals” means specific goals as contemplated in section 2(1)(d) of the PPPFA Act which may include

contracting with persons, or categories of persons, historically disadvantaged by unfair discrimination on the basis of

race, gender and disability including the implementation of programmes of the Reconstruction of Development

Programme as published in Government Gazette No. 16085 date 23 November 1994.

“Ownership” means the percentage ownership and control, exercised by individuals within an enterprise.

"Disability" means, in respect of a person, a permanent impairment of a physical, intellectual, or sensory function,

which results in restricted, or lack of, ability to perform an activity in the manner, or within the range, considered

normal for a human being.

i. A blind person (in terms of the Blind Persons Act, 1968 (Act no.);

ii. A deaf person, whose hearing is impaired to such an extent that he/she cannot use it as a primary means of

communication.

iii. A person who, as a result of permanent disability, requires a wheelchair, calliper or crutch to assist him/her to

move from one place or another.

iv. A person who requires an artificial limb; or

v. A person who suffers from a mental illness (in terms of the Mental Health Act, 1973 (Act no. ).

"Youth" means, in respect of a person younger than 35 years of age.

"Location of enterprise” Local equals province. Where a project cuts across more than one province, the bidder

may be located in any of the relevant provinces to claim and be allocated the points.

lawful instruction pertaining to occupational health and safety, given by or on behalf of the employer —

(a) compliance with requirements of the asbestos plan of work that was approved for that site-specific asbestos

work in terms of regulation 15.

(b) as far as is reasonably practicable, the use of non-destructive wet methods during asbestos removal work.

(c) the prevention of asbestos dust becoming airborne.

(d) the appropriate type and use of personal protective equipment and clothing.

(e) wearing of monitoring equipment to measure personal exposure to asbestos.

(f) reporting for medical surveillance as required by regulation 17.

(g) the cleaning up and disposal of any asbestos waste.

(h) decontamination of the structure of a workplace, building or plant, of any visible dust residue where

asbestos removal work has been undertaken.

(i) housekeeping at the workplace, personal hygiene and good environmental and health practices, including

eating, drinking and smoking in designated places, as provided; 17

(j) information and training received as contemplated in regulation 7; and

(k) the correct decontamination procedures that must be followed as given in the approved work plan.

15.

the registered asbestos contractor must—

NOTE: Before commencement of asbestos work, ensure that—

(i) an approved inspection authority has been appointed in writing.

(a) Undertake only the type of asbestos work for which they are registered by the chief inspector.

(b) Appoint an occupational health and safety representative as contemplated in section 17 of the Act

(C) Appoint in writing an asbestos removal supervisor for each asbestos work site, who must ensure—

(i) occupational health and safety compliance on the asbestos removal site.

(ii) compliance with safe asbestos removal procedures.

(iii) the correct use of personal protective equipment.

(iv) proper decontamination and waste disposal.

(d) Adhere to the removal methodology and associated control measures provided in the plan of work

approved for that specific asbestos work.

(e) Ensure that the employee medical and training records are available on site for inspection and validation.

(f) Ensure that at least the following information for every employee is recorded and kept for a minimum period

of 50 years-

(i) Physical address of every asbestos work project; and

(ii) names and identification numbers of employees potentially exposed.

(g) The registered asbestos contractor is registered and in good standing with the Compensation Fund or with

a licensed compensation insurer as contemplated in the Compensation for Occupational Injuries and Diseases

Act, 1993.

(h) Where a fatality or permanent disabling injury occurs during asbestos work, ensure that a report about the

fatality or injury is provided to the Department of Water and Sanitation and to the Department of Labour

Approved Inspection authority as contemplated in section 24 of the Act, and in accordance with regulations 8

and 9 of the General Administrative Regulations, 2003, and that the report includes the measures that the

contractor intends to implement to ensure safe asbestos work.

(1) A written approved plan of work, as contemplated in regulation 12(3), must include at least the

following:

(a) Name, contact details and responsibilities of the registered asbestos contractor, approved inspection

authority, asbestos waste transporter, asbestos waste disposal site and asbestos client;

(b) name and contact details of the asbestos removal supervisor for the asbestos work site;

(c) details of the asbestos to be removed, including the location, type, estimated quantity and condition of the

asbestos;

(d) a list of employees' names and identification numbers with verification of valid asbestos training and

medical surveillance records for the asbestos work site;

(e) expected commencement and completion dates;

(f) air monitoring method used, and frequency of air monitoring, in accordance with regulation 16;

(g) details of how the asbestos removal work will take place, including methods of removal, tools and

equipment, and the appropriate personal protective equipment to be used;

(h) details relating to the requirements of decontamination facilities and decontamination procedures;

(i) details of demarcation, labelling and signage requirements for regulated asbestos areas, asbestos waste

and temporary on-site storage areas;

(j) procedure for decontamination of the work area, tools and equipment;

(k) emergency procedures in the event of uncontrolled asbestos release;

(l) method for disposal of asbestos waste;

(m) detail of asbestos clearance certification; and

(n) specific relevant prohibitions.

(2) The approved plan of work, as contemplated in regulation 12(3), must contain the signatures of—

(a) the asbestos client accepting the duties as contemplated in regulation 11(2) and (3);

(b) the registered asbestos contractor accepting the duties as contemplated in regulation 12; and

(c) the approved inspection authority for asbestos accepting the duties as contemplated in regulation 13.

3.2 Safety Requirements

1. Roof sheets M2 760

1. Definitions 1. The following terms shall be interpreted as indicated:

1.1 “Closing time” means the date and hour specified in the bidding

documents for the receipt of bids.

1.2 “Contract” means the written agreement entered into between the

purchaser and the supplier, as recorded in the contract form signed by

the parties, including all attachments and appendices thereto and all

documents incorporated by reference therein.

1.3 “Contract price” means the price payable to the supplier under the

contract for the full and proper performance of his contractual

obligations.

1.4 “Corrupt practice” means the offering, giving, receiving, or soliciting

of any thing of value to influence the action of a public official in the

procurement process or in contract execution.

1.5 "Countervailing duties" are imposed in cases where an enterprise

abroad is subsidized by its government and encouraged to market its

products internationally.

1.6 “Country of origin” means the place where the goods were mined,

grown or produced or from which the services are supplied. Goods are

produced when, through manufacturing, processing or substantial and

major assembly of components, a commercially recognized new

product results that is substantially different in basic characteristics or

in purpose or utility from its components.

1.7 “Day” means calendar day.

1.8 “Delivery” means delivery in compliance of the conditions of the

contract or order.

1.9 “Delivery ex stock” means immediate delivery directly from stock

actually on hand.

1.10 “Delivery into consignees store or to his site” means delivered and

unloaded in the specified store or depot or on the specified site in

compliance with the conditions of the contract or order, the supplier

bearing all risks and charges involved until the supplies are so

delivered and a valid receipt is obtained.

1.11 "Dumping" occurs when a private enterprise abroad market its goods

on own initiative in the RSA at lower prices than that of the country of

origin and which have the potential to harm the local industries in the

in its sovereign capacity, wars or revolutions, fires, floods, epidemics,

quarantine restrictions and freight embargoes.

1.13 “Fraudulent practice” means a misrepresentation of facts in order to

influence a procurement process or the execution of a contract to the

detriment of any bidder, and includes collusive practice among bidders

(prior to or after bid submission) designed to establish bid prices at

artificial non-competitive levels and to deprive the bidder of the

benefits of free and open competition.

1.14 “GCC” means the General Conditions of Contract.

1.15 “Goods” means all of the equipment, machinery, and/or other materials

that the supplier is required to supply to the purchaser under the

contract.

1.16 “Imported content” means that portion of the bidding price represented

by the cost of components, parts or materials which have been or are

still to be imported (whether by the supplier or his subcontractors) and

which costs are inclusive of the costs abroad, plus freight and other

direct importation costs such as landing costs, dock dues, import duty,

sales duty or other similar tax or duty at the South African place of

entry as well as transportation and handling charges to the factory in

the Republic where the supplies covered by the bid will be

manufactured.

1.17 “Local content” means that portion of the bidding price which is not

included in the imported content provided that local manufacture does

take place.

1.18 “Manufacture” means the production of products in a factory using

labour, materials, components and machinery and includes other

related value-adding activities.

1.19 “Order” means an official written order issued for the supply of goods

or works or the rendering of a service.

1.20 “Project site,” where applicable, means the place indicated in bidding

documents.

1.21 “Purchaser” means the organization purchasing the goods.

1.22 “Republic” means the Republic of South Africa.

1.23 “SCC” means the Special Conditions of Contract.

1.24 “Services” means those functional services ancillary to the supply of

the goods, such as transportation and any other incidental services,

such as installation, commissioning, provision of technical assistance,

training, catering, gardening, security, maintenance and other such

obligations of the supplier covered under the contract.

1.25 “Written” or “in writing” means handwritten in ink or any form of

electronic or mechanical writing.

2. Application 2.1 These general conditions are applicable to all bids, contracts and orders

including bids for functional and professional services, sales, hiring,

letting and the granting or acquiring of rights, but excluding

immovable property, unless otherwise indicated in the bidding

documents.

2.2 Where applicable, special conditions of contract are also laid down to

cover specific supplies, services or works.

2.3 Where such special conditions of contract are in conflict with these

general conditions, the special conditions shall apply.

3. General 3.1 Unless otherwise indicated in the bidding documents, the purchaser

shall not be liable for any expense incurred in the preparation and

submission of a bid. Where applicable a non-refundable fee for

documents may be charged.

3.2 With certain exceptions, invitations to bid are only published in the

16. Payment

17. Prices

18. Contract amendments

19. Assignment

20. Subcontracts

21. Delays in the supplier’s performance

22. Penalties

23. Termination for default

24. Dumping and countervailing duties

25. Force Majeure

26. Termination for insolvency

27. Settlement of disputes

28. Limitation of liability

29. Governing language

30. Applicable law

31. Notices

32. Taxes and duties

33. National Industrial Participation Programme (NIPP)

34. Prohibition of restrictive practices

General Conditions of Contract

1. Definitions 1. The following terms shall be interpreted as indicated:

1.1 “Closing time” means the date and hour specified in the bidding

documents for the receipt of bids.

1.2 “Contract” means the written agreement entered into between the

purchaser and the supplier, as recorded in the contract form signed by

the parties, including all attachments and appendices thereto and all

documents incorporated by reference therein.

1.3 “Contract price” means the price payable to the supplier under the

contract for the full and proper performance of his contractual

obligations.

1.4 “Corrupt practice” means the offering, giving, receiving, or soliciting

of any thing of value to influence the action of a public official in the

procurement process or in contract execution.

1.5 "Countervailing duties" are imposed in cases where an enterprise

abroad is subsidized by its government and encouraged to market its

products internationally.

1.6 “Country of origin” means the place where the goods were mined,

grown or produced or from which the services are supplied. Goods are

produced when, through manufacturing, processing or substantial and

major assembly of components, a commercially recognized new

product results that is substantially different in basic characteristics or

in purpose or utility from its components.

1.7 “Day” means calendar day.

1.8 “Delivery” means delivery in compliance of the conditions of the

contract or order.

1.9 “Delivery ex stock” means immediate delivery directly from stock

actually on hand.

1.10 “Delivery into consignees store or to his site” means delivered and

unloaded in the specified store or depot or on the specified site in

compliance with the conditions of the contract or order, the supplier

bearing all risks and charges involved until the supplies are so

delivered and a valid receipt is obtained.

1.11 "Dumping" occurs when a private enterprise abroad market its goods

on own initiative in the RSA at lower prices than that of the country of

origin and which have the potential to harm the local industries in the

RSA.

1.12 ”Force majeure” means an event beyond the control of the supplier and

not involving the supplier’s fault or negligence and not foreseeable.

Such events may include, but is not restricted to, acts of the purchaser

in its sovereign capacity, wars or revolutions, fires, floods, epidemics,

quarantine restrictions and freight embargoes.

1.13 “Fraudulent practice” means a misrepresentation of facts in order to

influence a procurement process or the execution of a contract to the

detriment of any bidder, and includes collusive practice among bidders

(prior to or after bid submission) designed to establish bid prices at

artificial non-competitive levels and to deprive the bidder of the

benefits of free and open competition.

1.14 “GCC” means the General Conditions of Contract.

1.15 “Goods” means all of the equipment, machinery, and/or other materials

that the supplier is required to supply to the purchaser under the

contract.

1.16 “Imported content” means that portion of the bidding price represented

by the cost of components, parts or materials which have been or are

still to be imported (whether by the supplier or his subcontractors) and

which costs are inclusive of the costs abroad, plus freight and other

direct importation costs such as landing costs, dock dues, import duty,

sales duty or other similar tax or duty at the South African place of

entry as well as transportation and handling charges to the factory in

the Republic where the supplies covered by the bid will be

manufactured.

1.17 “Local content” means that portion of the bidding price which is not

included in the imported content provided that local manufacture does

take place.

1.18 “Manufacture” means the production of products in a factory using

labour, materials, components and machinery and includes other

related value-adding activities.

1.19 “Order” means an official written order issued for the supply of goods

or works or the rendering of a service.

1.20 “Project site,” where applicable, means the place indicated in bidding

documents.

1.21 “Purchaser” means the organization purchasing the goods.

1.22 “Republic” means the Republic of South Africa.

1.23 “SCC” means the Special Conditions of Contract.

1.24 “Services” means those functional services ancillary to the supply of

the goods, such as transportation and any other incidental services,

such as installation, commissioning, provision of technical assistance,

training, catering, gardening, security, maintenance and other such

obligations of the supplier covered under the contract.

1.25 “Written” or “in writing” means handwritten in ink or any form of

electronic or mechanical writing.

2. Application 2.1 These general conditions are applicable to all bids, contracts and orders

including bids for functional and professional services, sales, hiring,

letting and the granting or acquiring of rights, but excluding

immovable property, unless otherwise indicated in the bidding

documents.

2.2 Where applicable, special conditions of contract are also laid down to

cover specific supplies, services or works.

2.3 Where such special conditions of contract are in conflict with these

general conditions, the special conditions shall apply.

3. General 3.1 Unless otherwise indicated in the bidding documents, the purchaser

shall not be liable for any expense incurred in the preparation and

submission of a bid. Where applicable a non-refundable fee for

documents may be charged.

3.2 With certain exceptions, invitations to bid are only published in the

Government Tender Bulletin. The Government Tender Bulletin may be

obtained directly from the Government Printer, Private Bag X85,

Pretoria 0001, or accessed electronically from www.treasury.gov.za

4. Standards 4.1 The goods supplied shall conform to the standards mentioned in the

bidding documents and specifications.

5. Use of 5.1 The supplier shall not, without the purchaser’s prior written consent,

contract disclose the contract, or any provision thereof, or any specification,

documents plan, drawing, pattern, sample, or information furnished by or on

and behalf of the purchaser in connection therewith, to any person other

information; than a person employed by the supplier in the performance of the

inspection.

contract. Disclosure to any such employed person shall be made in

confidence and shall extend only so far as may be necessary for

purposes of such performance.

5.2 The supplier shall not, without the purchaser’s prior written consent,

make use of any document or information mentioned in GCC clause

5.1 except for purposes of performing the contract.

5.3 Any document, other than the contract itself mentioned in GCC clause

5.1 shall remain the property of the purchaser and shall be returned (all

copies) to the purchaser on completion of the supplier’s performance

under the contract if so required by the purchaser.

5.4 The supplier shall permit the purchaser to inspect the supplier’s records

relating to the performance of the supplier and to have them audited by

auditors appointed by the purchaser, if so required by the purchaser.

6. Patent rights 6.1 The supplier shall indemnify the purchaser against all third-party

claims of infringement of patent, trademark, or industrial design rights

arising from use of the goods or any part thereof by the purchaser.

7. Performance 7.1 Within thirty (30) days of receipt of the notification of contract award,

security the successful bidder shall furnish to the purchaser the performance

security of the amount specified in SCC.

7.2 The proceeds of the performance security shall be payable to the

purchaser as compensation for any loss resulting from the supplier’s

failure to complete his obligations under the contract.

7.3 The performance security shall be denominated in the currency of the

contract, or in a freely convertible currency acceptable to the purchaser

and shall be in one of the following forms:

(a) a bank guarantee or an irrevocable letter of credit issued by a

reputable bank located in the purchaser’s country or abroad,

acceptable to the purchaser, in the form provided in the

bidding documents or another form acceptable to the

purchaser; or

(b) a cashier’s or certified cheque

7.4 The performance security will be discharged by the purchaser and

returned to the supplier not later than thirty (30) days following the

date of completion of the supplier’s performance obligations under the

contract, including any warranty obligations, unless otherwise

specified in SCC.

8. Inspections, 8.1 All pre-bidding testing will be for the account of the bidder.

tests and

analyses 8.2 If it is a bid condition that supplies to be produced or services to be

rendered should at any stage during production or execution or on

completion be subject to inspection, the premises of the bidder or

contractor shall be open, at all reasonable hours, for inspection by a

representative of the Department or an organization acting on behalf of

the Department.

8.3 If there are no inspection requirements indicated in the bidding

documents and no mention is made in the contract, but during the

contract period it is decided that inspections shall be carried out, the

purchaser shall itself make the necessary arrangements, including

payment arrangements with the testing authority concerned.

8.4 If the inspections, tests and analyses referred to in clauses 8.2 and 8.3

show the supplies to be in accordance with the contract requirements,

the cost of the inspections, tests and analyses shall be defrayed by the

purchaser.

8.5 Where the supplies or services referred to in clauses 8.2 and 8.3 do not

comply with the contract requirements, irrespective of whether such

supplies or services are accepted or not, the cost in connection with

these inspections, tests or analyses shall be defrayed by the supplier.

8.6 Supplies and services which are referred to in clauses 8.2 and 8.3 and

which do not comply with the contract requirements may be rejected.

8.7 Any contract supplies may on or after delivery be inspected, tested or

analyzed and may be rejected if found not to comply with the

requirements of the contract. Such rejected supplies shall be held at the

cost and risk of the supplier who shall, when called upon, remove them

immediately at his own cost and forthwith substitute them with

supplies which do comply with the requirements of the contract.

Failing such removal the rejected supplies shall be returned at the

suppliers cost and risk. Should the supplier fail to provide the

substitute supplies forthwith, the purchaser may, without giving the

supplier further opportunity to substitute the rejected supplies,

purchase such supplies as may be necessary at the expense of the

supplier.

8.8 The provisions of clauses 8.4 to 8.7 shall not prejudice the right of the

purchaser to cancel the contract on account of a breach of the

conditions thereof, or to act in terms of Clause 23 of GCC.

9. Packing 9.1 The supplier shall provide such packing of the goods as is required to

prevent their damage or deterioration during transit to their final

destination, as indicated in the contract. The packing shall be

sufficient to withstand, without limitation, rough handling during

transit and exposure to extreme temperatures, salt and precipitation

during transit, and open storage. Packing, case size and weights shall

take into consideration, where appropriate, the remoteness of the

goods’ final destination and the absence of heavy handling facilities at

all points in transit.

9.2 The packing, marking, and documentation within and outside the

packages shall comply strictly with such special requirements as shall

be expressly provided for in the contract, including additional

requirements, if any, specified in SCC, and in any subsequent

instructions ordered by the purchaser.

10. Delivery 10.1 Delivery of the goods shall be made by the supplier in accordance with

and documents the terms specified in the contract. The details of shipping and/or other

documents to be furnished by the supplier are specified in SCC.

10.2 Documents to be submitted by the supplier are specified in SCC.

11. Insurance 11.1 The goods supplied under the contract shall be fully insured in a freely

convertible currency against loss or damage incidental to manufacture

or acquisition, transportation, storage and delivery in the manner

specified in the SCC.

12. Transportation 12.1 Should a price other than an all-inclusive delivered price be required,

this shall be specified in the SCC.

13. Incidental 13.1 The supplier may be required to provide any or all of the following

services services, including additional services, if any, specified in SCC:

(a) performance or supervision of on-site assembly and/or

commissioning of the supplied goods;

(b) furnishing of tools required for assembly and/or maintenance

of the supplied goods;

(c) furnishing of a detailed operations and maintenance manual

for each appropriate unit of the supplied goods;

liability shall be accepted in regard to claims arising from the fact that pages are missing or duplicated.

• The quantity required cannot be guaranteed.
• However, the estimated quantity is given in the SBD 3.1.
• DWS-CE reserves the right to reduce the ordered quantity even after the order has been awarded

and the service provider will be paid for what is required.

• Orders will be placed as and when requirements become known.

• Material will be delivered to the Department, and the supply and delivery shall commence not later

than 14 days after receipt of official DWS order as and when requested by end-user.

• The Department is unable to guarantee the specific quantities that will be purchased during the

contract period.

1.12 ”Force majeure” means an event beyond the control of the supplier and

not involving the supplier’s fault or negligence and not foreseeable.

obtained directly from the Government Printer, Private Bag X85,

Pretoria 0001, or accessed electronically from www.treasury.gov.za

4. Standards 4.1 The goods supplied shall conform to the standards mentioned in the

bidding documents and specifications.

5. Use of 5.1 The supplier shall not, without the purchaser’s prior written consent,

contract disclose the contract, or any provision thereof, or any specification,

documents plan, drawing, pattern, sample, or information furnished by or on

and behalf of the purchaser in connection therewith, to any person other

information; than a person employed by the supplier in the performance of the

inspection.

contract. Disclosure to any such employed person shall be made in

confidence and shall extend only so far as may be necessary for

purposes of such performance.

5.2 The supplier shall not, without the purchaser’s prior written consent,

make use of any document or information mentioned in GCC clause

5.1 except for purposes of performing the contract.

5.3 Any document, other than the contract itself mentioned in GCC clause

5.1 shall remain the property of the purchaser and shall be returned (all

copies) to the purchaser on completion of the supplier’s performance

under the contract if so required by the purchaser.

5.4 The supplier shall permit the purchaser to inspect the supplier’s records

relating to the performance of the supplier and to have them audited by

auditors appointed by the purchaser, if so required by the purchaser.

6. Patent rights 6.1 The supplier shall indemnify the purchaser against all third-party

claims of infringement of patent, trademark, or industrial design rights

arising from use of the goods or any part thereof by the purchaser.

7. Performance 7.1 Within thirty (30) days of receipt of the notification of contract award,

security the successful bidder shall furnish to the purchaser the performance

security of the amount specified in SCC.

7.2 The proceeds of the performance security shall be payable to the

purchaser as compensation for any loss resulting from the supplier’s

failure to complete his obligations under the contract.

7.3 The performance security shall be denominated in the currency of the

contract, or in a freely convertible currency acceptable to the purchaser

and shall be in one of the following forms:

(a) a bank guarantee or an irrevocable letter of credit issued by a

reputable bank located in the purchaser’s country or abroad,

acceptable to the purchaser, in the form provided in the

bidding documents or another form acceptable to the

purchaser; or

(b) a cashier’s or certified cheque

7.4 The performance security will be discharged by the purchaser and

returned to the supplier not later than thirty (30) days following the

date of completion of the supplier’s performance obligations under the

contract, including any warranty obligations, unless otherwise

specified in SCC.

8. Inspections, 8.1 All pre-bidding testing will be for the account of the bidder.

tests and

analyses 8.2 If it is a bid condition that supplies to be produced or services to be

rendered should at any stage during production or execution or on

completion be subject to inspection, the premises of the bidder or

contractor shall be open, at all reasonable hours, for inspection by a

representative of the Department or an organization acting on behalf of

the Department.

8.3 If there are no inspection requirements indicated in the bidding

documents and no mention is made in the contract, but during the

contract period it is decided that inspections shall be carried out, the

purchaser shall itself make the necessary arrangements, including

payment arrangements with the testing authority concerned.

8.4 If the inspections, tests and analyses referred to in clauses 8.2 and 8.3

show the supplies to be in accordance with the contract requirements,

the cost of the inspections, tests and analyses shall be defrayed by the

purchaser.

8.5 Where the supplies or services referred to in clauses 8.2 and 8.3 do not

comply with the contract requirements, irrespective of whether such

supplies or services are accepted or not, the cost in connection with

these inspections, tests or analyses shall be defrayed by the supplier.

8.6 Supplies and services which are referred to in clauses 8.2 and 8.3 and

which do not comply with the contract requirements may be rejected.

8.7 Any contract supplies may on or after delivery be inspected, tested or

analyzed and may be rejected if found not to comply with the

requirements of the contract. Such rejected supplies shall be held at the

cost and risk of the supplier who shall, when called upon, remove them

immediately at his own cost and forthwith substitute them with

supplies which do comply with the requirements of the contract.

suppliers cost and risk. Should the supplier fail to provide the

substitute supplies forthwith, the purchaser may, without giving the

supplier further opportunity to substitute the rejected supplies,

purchase such supplies as may be necessary at the expense of the

supplier.

8.8 The provisions of clauses 8.4 to 8.7 shall not prejudice the right of the

purchaser to cancel the contract on account of a breach of the

conditions thereof, or to act in terms of Clause 23 of GCC.

9. Packing 9.1 The supplier shall provide such packing of the goods as is required to

prevent their damage or deterioration during transit to their final

destination, as indicated in the contract. The packing shall be

sufficient to withstand, without limitation, rough handling during

transit and exposure to extreme temperatures, salt and precipitation

during transit, and open storage. Packing, case size and weights shall

take into consideration, where appropriate, the remoteness of the

goods’ final destination and the absence of heavy handling facilities at

all points in transit.

9.2 The packing, marking, and documentation within and outside the

packages shall comply strictly with such special requirements as shall

be expressly provided for in the contract, including additional

requirements, if any, specified in SCC, and in any subsequent

instructions ordered by the purchaser.

10. Delivery 10.1 Delivery of the goods shall be made by the supplier in accordance with

and documents the terms specified in the contract. The details of shipping and/or other

documents to be furnished by the supplier are specified in SCC.

10.2 Documents to be submitted by the supplier are specified in SCC.

11. Insurance 11.1 The goods supplied under the contract shall be fully insured in a freely

convertible currency against loss or damage incidental to manufacture

or acquisition, transportation, storage and delivery in the manner

specified in the SCC.

12. Transportation 12.1 Should a price other than an all-inclusive delivered price be required,

this shall be specified in the SCC.

13. Incidental 13.1 The supplier may be required to provide any or all of the following

services services, including additional services, if any, specified in SCC:

(a) performance or supervision of on-site assembly and/or

commissioning of the supplied goods;

(b) furnishing of tools required for assembly and/or maintenance

of the supplied goods;

(c) furnishing of a detailed operations and maintenance manual

for each appropriate unit of the supplied goods;