Paving of road from mafemini to kantibane, lehawu ward 40 (mbombela local municipality)

• Phone: 074 555 1065

Not explicitly stated in the provided document content. Typically for Mbombela Local Municipality tenders: CIDB grading appropriate for road construction (likely 6CE or higher), valid tax clearance, BBBEE certification, relevant experience in road paving and stormwater projects, and compliance with municipal supply chain management policies.

• The work involves the paving of a road from Mafemini to Kantibane at Lehawu Ward 40.
• The contractor must confirm existing ground levels and CBR values prior to commencing work.
• Materials must be tested and stacked/stored safely as instructed by the engineer.
• Construction includes road layers, stabilisation, subbase, kerbs, culverts, and guardrails.
• Specific technical notes: The contractor shall provide test indicators/results and ensure all materials and levels are according to specifications before proceeding.
• Concrete works require specific compressive strengths, cement content, and curing periods as per SABS standards.
• Detailed drawings and specifications govern all construction elements, including culvert installation, road alignment, and finishing.

• The contractor must follow a specific construction sequence: testing and approval of existing gravel/subgrade, then placement of road layers.
• Prior to any layer, submit test results (e.g., compaction, stabilisation) for engineer approval.
• Detailed construction notes for culverts, kerbs, and road widening are provided in the drawings.
• The methodology includes steps for blinding concrete, slab placement, and backfilling.

• Strict quality control is required for all concrete works, including beams, columns, slabs, and foundations.
• Minimum concrete strengths are specified (e.g., 20/19, 25/19, 30/19, 40/19 MPa).
• Concrete cubes must be placed and tested for compressive strength.
• Formwork, finishing, and curing must meet detailed specifications.
• All work must be inspected and approved, with discrepancies brought to the engineer's attention.
• Specific notes cover blinding, structural members, and exposure conditions.

• B-BBEE Minimum Level: 50.
• Work must comply with SABS 1200 specifications.
• Specific standards for materials and construction methods are referenced (e.g., SABS, specific concrete grades).

• Specific safety-related specifications are included for guardrail installation.
• Guardrails must be placed according to SABS specifications, using treated timber (e.g., creosoted pine or eucalyptus) or galvanized steel.
• Details include post spacing, bolt sizes, and installation methods to ensure traffic safety.
• General site safety during construction is implied through compliance with specified standards.

• Evaluation involves concrete compressive strength testing against specified MPa grades (e.g., 20, 25, 30, 40 MPa).
• Concrete must be tested at 28 days and comply with SABS standards.
• Specific finishes and approvals are required before work proceeds.
• The contractor is responsible for quality control and obtaining engineer approval for test results.