Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Quotation
Delivery Location
04 Gomery road - Summerstrand - Gqerberha - 6001
Organization Type
GOVERNMENT
Published
09 Sept 2026
OCDS Reference
ocds-9t57fa-169600
The south african environmental observation network (saeon), a business unit of the national research foundation (nrf), seeks a service provider to deliver online quality assurance and safety management system courses with full certification for one employee who already holds a valid remote pilot certificate. The contract is a once-off supply with a 60-day bid validity period.
Closing date and time: 16 September 2026 at 11:00 am; submissions via email to [email protected] in PDF format only.
Mandatory returnable documents: signed Procurement Invitation (SBD 1) including SBD 4 and SBD 6.1; proof of authority (e.g. company resolution); proof of CSD registration; valid B-BBEE certificate or sworn affidavit; completed pricing schedule (SBD 3.1) or quotation on company letterhead.
Eligibility (go/no-go): supplier must provide evidence of SACAA accreditation or SACAA-recognised certification to conduct QA & SMS courses; courses must be available online.
Evaluation: two-stage process — Stage 1 compliance with submission requirements; Stage 2 technical evaluation against specifications (minimum threshold required to proceed to price/preference scoring).
Preference points: 80/20 system (80 points for price, 20 points for specific goals including B-BBEE status level, black ownership, black female ownership, black youth ownership, disability ownership, and EME/QSE status).
Pricing: firm quantities for one QA course, one SMS course, certification for two candidates, and courier delivery of certificates to Gqeberha; price quoted in ZAR, fully inclusive of all costs including VAT, delivery, UIF and SDL.
Tax compliance: bidders must submit SARS tax compliance status PIN or TCS certificate; CSD registration required for verification.
Continue with tenders sharing this issuer, category, or province.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Date & Time
Wednesday, 16 September 2026 - 11:00
Venue
null
Request for Quotation
04 Gomery road - Summerstrand - Gqerberha - 6001
Tenders in this industry often require registration with these bodies.
Recommended Certifications
Having these can improve your winning chances: CA(SA) - Chartered Accountant, PMI-PMP (Project Management Professional), Prince2 Practitioner, Six Sigma Certification
AI Document Analysis Stages
Description
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf09 Sept
2026
Tender Published
Tender was published
16 Sept
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf
The National Research Foundation (NRF), through its SAEON Elwandle node, seeks a service provider to deliver online RPAS/UAS Quality Assurance (QA) and Safety Management System (SMS) courses and certification for one employee who already holds a valid Remote Pilot Certificate. The contract is a once-off supply, with online delivery preferred.
To download these documents and access AI-powered analysis, visit the main tender page.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubWe refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Introduction to the nrf
The National Research Foundation Act, Act , establishes the National Research
Foundation (“NRF”) as the juristic person that makes this bid invitation and will contract with the
awarded bidder. The Public Finance Management Act classifies the organisation as a Schedule
3A Public Entity.
Context of this procurement
The SAEON seeks to appoint a service provider to provide Online Quality Assurance (QA)
& Safety Management System (SMS) Courses and Certification for RPAS/UAS for an
employee already in possession of a Remote Pilot Certificate
Contract period
Once off supply
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Description of goods/detailed specification
Services required: RPAS/UAS Quality Assurance (QA) & Safety Management System (SMS)
Courses and Certification
Sets of quotation documents required
Number of ORIGINAL bid documents for contract signing 1
Bidders must submit the above number of original documents in electronic format (email) to the
NRF. These serve as the original sets for the legal bid document and upon award , signature and
serve as the legal contract document between the bidder and the NRF.
Returnable documents checklist
The bidder is to complete this table and to supply the necessary page references to the
supporting documentation. A bidder failing to adequately provide any of the mandatory
documents will be disqualified.
Legislative/Technical Documents Compliance
(M – Mandatory); (O – Optional); Submitted Bid Section Reference to
(A- Administrative) Reference Bidder’s
document
Bidder Eligibility
Procurement Invitation (SBD 1), signed ❑
and completed including the SBD 4, 6.1 A Yes Pages 1-20
and signed Bid Submission Certificate ❑ No
form.
❑
Proof of authority must be submitted e.g. A Yes
company resolution ❑ No
❑ Proof of Registration on the
Government’s Central Supplier Database A Yes
(CSD). ❑ No
❑
A valid B-BBEE certificate or Sworn O Yes Pages 16-19
Affidavit ❑ No
Specification Eligibility
The supplier/service provider must
provide evidence demonstrating their ❑
capability to conduct QA & SMS courses
M Yes e.g. South African Civil Aviation Authority
❑ No accreditation (SACAA) or SACAA
recognised certification
Pricing Documents Compliance
❑
Pricing (SBD 3.1) / or a quotation to be
M Yes Pages 09-11
completed.
❑ No
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Eligibility criteria (go/no-go)
Selection Element Meet Bid Section
Reference to
Specificati Reference
Bidder’s
on
document
Important Dates
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Closing date: 16 September 2026 at 11:00 am (compulsory). No other dates specified.
Contact Information
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)SCM contact: Riaan Weitz, email [email protected] (bidding enquiries). Technical contact: same email [email protected].
Submission Guidelines
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Bids must be submitted by email to [email protected] as PDF only, by the closing time. Required returnable documents: SBD 1 (Invitation to Bid) signed and completed, SBD 4 (Declaration of Interest), SBD 6.1 (Preference Points Claim), SBD 3.1/3.2 (Pricing Schedule) or quotation on company letterhead, and the Bid Submission Certificate (SBD 1). All forms must be signed and submitted with the bid.
Returnable Documents
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Returnable Documents Checklist: Legislative/Technical Documents Compliance: Procurement Invitation (SBD 1) signed and completed including SBD 4, 6.1 and signed Bid Submission Certificate form (Mandatory, Administrative, Pages 1-20); Proof of authority e.g. company resolution (Mandatory, Administrative); Proof of Registration on Central Supplier Database (CSD) (Mandatory, Administrative); Valid B-BBEE certificate or Sworn Affidavit (Optional, Pages 16-19). Specification Eligibility: Evidence of capability to conduct QA & SMS courses e.g. SACAA accreditation or SACAA recognised certification (Mandatory). Pricing Documents Compliance: Pricing (SBD 3.1) / or a quotation completed (Mandatory, Pages 09-11). Sets of quotation documents required: 1 original in electronic format (email) for contract signing.
Evaluation Criteria
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Stage 1 – compliance: submit signed SBD 1 with SBD 4 and SBD 6.1, Bid Submission Certificate, proof of authority, CSD registration, valid BBBEE certificate, SACAA accreditation, online course availability, completed pricing schedule (SBD 3.2) or quotation, tax compliance PIN/CSD, and declaration of no state employment. Stage 2 – technical: evaluate responses against specifications, including QA & SMS course capability. Stage 3 – price/preference: apply 80/20 split; price points calculated using lowest acceptable tender formula; add preference points for BBBEE status levels, black‑owned, black‑female‑owned, black youth‑owned, PWD ownership, EME/QSE (max 20 points). Stage 4 – tax compliance: verify SARS PIN/CSD for SA and foreign bidders. Stage 5 – award: highest combined score wins, subject to administrative documents.
Technical Specifications
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Provide online RPAS/UAS QA & SMS training and certification for one SAEON employee holding a Remote Pilot Certificate. Course must be delivered online, include certification, and be conducted by a SACAA‑accredited or SACAA‑recognised training provider.
Methodology
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Online courses will be preferential. Service provider must deliver services during normal working hours (Monday to Friday, 08h30 to 17h00, excluding public holidays) and/or additional hours as reasonably required by NRF. Services rendered outside these hours only by mutual agreement based on severity level. Communication in writing through mail, delivery, or email with contract number and purchase order number stated.
Quality Management
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdfQuote number: rfq/saeon/elwandle/qa and sms
COURSES/130/2026
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Fraud alert! It is common for scammers to call bidders pretending to be NRF’s
employees and offering to swing tenders your way for a fee.
Do not fall for it, it is a scam!
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Is the entity a resident of the Republic of South Africa (RSA)? ❑ Yes ❑ No
Does the entity have a branch in the RSA? ❑ Yes ❑ No
Does the entity have a permanent establishment in the RSA? ❑ Yes ❑ No
Does the entity have any source of income in the RSA? ❑ Yes ❑ No
Is the entity liable in the RSA for any form of taxation? ❑ Yes ❑ No
If the answer is “No” to all of the above, then it is not a requirement to register for a tax compliance
status system pin code from the South African Revenue Service (SARS) and if not register as
per 2.3 below.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Terms and conditions for bidding (sbd 1b)
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Terms and conditions for bidding (sbd 1b)
Stage 2A – Evaluation of Bids against Specifications including Quality
The NRF evaluates each bidder’s written response to the specifications issued in accordance
with published evaluation criteria set as in Section D.
Stage 2B – Due Diligence Interviews or Proof of Delivery/Concept against Specifications
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Terms and conditions for bidding (sbd 1b)
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
The SAEON seeks to appoint a service provider to provide Online Quality Assurance (QA)
& Safety Management System (SMS) Courses and Certification for RPAS/UAS for an
employee already in possession of a Remote Pilot Certificate
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Services required: RPAS/UAS Quality Assurance (QA) & Safety Management System (SMS)
provide evidence demonstrating their ❑
capability to conduct QA & SMS courses
❑
Pricing (SBD 3.1) / or a quotation to be
M Yes Pages 09-11
completed.
❑ No
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Eligibility criteria (go/no-go)
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
contracted bidder against the performance levels set in this document. The NRF deems
failure by the contracted bidder to measure performance with respect to the contract
specifications for any measurement period, as a failure to meet the stipulated
performance levels.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
that person will automatically be disqualified from the bid process.
2.1 Is the bidder, or any of its directors / trustees / shareholders / members / partners or any person
having a controlling interest1 in the enterprise,
employed by the state? YES/NO
2.1.1 If so, furnish particulars of the names, individual identity numbers, and, if applicable, state
employee numbers of sole proprietor/ directors / trustees / shareholders / members/ partners or any
person having a controlling interest in the enterprise, in table below.
1 the power, by one person or a group of persons holding the majority of the equity of an enterprise, alternatively, the person/s having
the deciding vote or power to influence or to direct the course and decisions of the enterprise.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
I, the undersigned, (name)............................................................................... in submitting the
accompanying bid, do hereby make the following statements that I certify to be true and complete in
every respect:
3.1 I have read and I understand the contents of this disclosure;
3.2 I understand that the accompanying bid will be disqualified if this disclosure is found not to be
true and complete in every respect;
3.3 The bidder has arrived at the accompanying bid independently from, and without consultation,
communication, agreement or arrangement with any competitor. However, communication between
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
partners in a joint venture or consortium2 will not be construed as collusive bidding.
3.4 In addition, there have been no consultations, communications, agreements or arrangements
with any competitor regarding the quality, quantity, specifications, prices, including methods, factors or
formulas used to calculate prices, market allocation, the intention or decision to submit or not to submit
the bid, bidding with the intention not to win the bid and conditions or delivery particulars of the products
or services to which this bid invitation relates.
3.4 The terms of the accompanying bid have not been, and will not be, disclosed by the bidder,
directly or indirectly, to any competitor, prior to the date and time of the official bid opening or of the
awarding of the contract.
3.5 There have been no consultations, communications, agreements or arrangements made by the
bidder with any official of the procuring institution in relation to this procurement process prior to and
during the bidding process except to provide clarification on the bid submitted where so required by the
institution; and the bidder was not involved in the drafting of the specifications or terms of reference for
this bid.
3.6 I am aware that, in addition and without prejudice to any other remedy provided to combat any
restrictive practices related to bids and contracts, bids that are suspicious will be reported to the
skill and knowledge in an activity for the execution of a contract.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Preference points claimed (sbd 6.1)
Nb: before completing this form, tenderers must study the general
Price 80
Specific goals 20
Total points for Price and SPECIFIC GOALS 100
a. Failure on the part of a tenderer to submit proof or documentation required in terms of
this tender to claim points for specific goals with the tender, will be interpreted to mean
that preference points for specific goals are not claimed.
b. The organ of state reserves the right to require of a tenderer, either before a tender is
adjudicated or at any time subsequently, to substantiate any claim in regard to
preferences, in any manner required by the organ of state.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Preference points claimed (sbd 6.1)
4.1 In terms of Regulation 4(2); 5(2); 6(2) and 7(2) of the Preferential Procurement Regulations,
preference points must be awarded for specific goals stated in the tender. For the purposes of this
tender the tenderer will be allocated points based on the goals stated in table 1 below as may be
supported by proof/ documentation stated in the conditions of this tender:
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Preference points claimed (sbd 6.1)
Table 1: Specific goals for the tender and points claimed are indicated per the table below:
Note to tenderers: The tenderer must indicate how they claim points for each preference point
system.) Tenderer to submit a valid BBBEE certificate in order to earn points on specific goals.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
regarding this or any other Bid.
I certify that the information furnished in these declarations (SBD 3, SBD 4, SBD 6.1 and SBD 6.2 (if
applicable)) is correct and I accept that the NRF may reject the Bid or act against me should these
declarations prove to be false.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Pricing Schedule
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdfThe NRF compares each bidder’s pricing proposal on an equal and fair comparison basis
equitable to all bidders, taking into account all aspects of the bid’s pricing requirements
including the application of fair pricing tests as set out below in the section “Insufficiency of
Funds”.
2 Fully completed pricing schedule ❑ YES ❑ Documents’
(SBD 3.1) / or a quotation on the NO Due diligence
company letterhead. Returnable of
Detailed specifications provided on ❑ YES ❑ Detailed
the quotation have met the scope of NO Specifications.
work required.
4 Proof of registration of a SACAA ❑ YES ❑
approved/recognised training facility NO
5 Course available online ❑ YES ❑
NO
Sbd 3.2: Pricing detail
specified NRF price delivery point and includes value- added tax, income tax,
unemployment insurance fund contributions, and skills development levies in terms of
General Conditions of contract clauses 12, 32.1 and 32.2.
Price Delivery Point: In cases where different delivery points influence the pricing, the
bidder submits a separate pricing schedule for each delivery point.
9 Detail Pricing Support: Detailed information e.g. costed bill of quantities is optional where
not stated in the price schedule below and is provided as an annexure to the details
included in this SBD 3
10 Application of Preference Points: Pricing is subject to the addition of Preference Points as
stipulated below - Standard Bidding Document 6.1 Preference claim form.
Pricing schedule 3.2
even where integrated in this document:
Invitation to Bid (SBD 1) Specification(s) set out in this Quotation Invitation
inclusive of any annexures thereto
Bidder’s responses to this invitation as Pricing Schedule(s) (SBD3) including detailed
attached to this document schedules attached
Local Content and Local Manufacturing Certification (SBD 6.2) in accordance with the SABS
standard
Declaration of Interest (SBD4) General Conditions of Contract and
special/additional conditions of contract as set out in
this document
Preference (SBD 6.1) claims for Broad Based Black Economic Empowerment Status Level of
Financial Requirements
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Submit a pricing schedule (SBD 3.2) quoting unit prices for: 1 QA course, 1 SMS course, 2 certifications, courier delivery to Gqeberha. Prices must be in ZAR, inclusive of VAT, income tax, UIF and skills development levies. A contract ceiling price covers firm and possible future quantities; price adjustments are shared equally between parties. Preference points may be added based on BBBEE claims.
Compliance Requirements
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)1 Fully completed Procurement ❑ YES ❑ Pages 1-20 Invitation (SBD 1) including the SBD NO 4, 6.1 and signed Bid Submission Certificate form. 2 Fully completed pricing schedule ❑ YES ❑ Documents’ (SBD 3.1) / or a quotation on the NO Due diligence company letterhead. Returnable of Eligibility on Detailed specifications provided on ❑ YES ❑ Detailed the quotation have met the scope of NO Specifications. work required. 4 Proof of registration of a SACAA ❑ YES ❑ approved/recognised training facility NO 5 Course available online ❑ YES ❑ NO SBD 3.2: PRICING DETAIL Pricing Special Conditions 1 Pricing Schedule: In terms of General Conditions of contract clause 17.1, the price schedule remains unchanged for the duration of the contract with the NRF accepting no changes, extensions, or additional ad hoc costs to the pricing conditions of the contract with the exception of any price adjustments authorised in the Special Conditions of Contract for pricing set out below: 2 Firm Quantities over the Contract Period: The NRF requires firm set quantities during the current period with the time of delivery being determined during the contract period. 3 Estimated quantities over the Contract Period: The NRF may require further quantities during the current period with the actual quantity and time of delivery being determined when such quantities are needed. For bidding purposes and to establish the contract ceiling price, the NRF provides estimated quantities of what its requirements and estimated timing during the contract period for bidders to establish their pricing. The NRF does not provide guarantees or commitments that it will order this entire amount during the contract’s life. The NRF, through the signed contract, guarantees its procurement of the specified goods and/or services is from the contracted party only. 4 Placement of written purchase orders for actual quantities ordered: The NRF manages the execution of this contract through the issue of written purchase orders – stipulating quantity, description, delivery date, and the unit price as et out in this contract - for the contracted supplies. The NRF, when issuing the written purchase order, guarantees that the funding is available. 5 Contract Ceiling Price: With these estimates in the bid contract, the contract ceiling price of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026 SBD 3.2: PRICING DETAIL includes both the firm quantities and the potential future quantities within the contract ceiling price. The NRF manages the contract within the contract ceiling price by paying only for the verified deliveries/performances in terms of the clauses of this contract. The cumulative value of each of these invoices at the expiry of the contract is the actual total contract price. 6 Price Adjustments: In terms of General Conditions of Contract clause 17.1, the price adjustments with the rules for application are set out below as special conditions of Contract Clause 17.1. Price adjustments and their corresponding rules are for the management of price risks on the basis of the NRF and the contracted bidder sharing the risk equally. 7 Price quoted is South African Rands in terms of General Conditions of contract clause 16.4 8 Price Quotation Basis Price quoted is fully inclusive of all costs including delivery to the specified NRF price delivery point and includes value- added tax, income tax, unemployment insurance fund contributions, and skills development levies in terms of General Conditions of contract clauses 12, 32.1 and 32.2. Price Delivery Point: In cases where different delivery points influence the pricing, the bidder submits a separate pricing schedule for each delivery point. 9 Detail Pricing Support: Detailed information e.g. costed bill of quantities is optional where not stated in the price schedule below and is provided as an annexure to the details included in this SBD 3 10 Application of Preference Points: Pricing is subject to the addition of Preference Points as stipulated below - Standard Bidding Document 6.1 Preference claim form. PRICING SCHEDULE 3.2 DESCRIPTION QTY UNIT OF TOTAL PRICE (Refer to specification) MEASURE
Online RPAS/UAS Quality 1 Assurance Course
Online RPAS/UAS Safety Management 1 System Course
Provide full certification for course 2 candidate
Courier/ delivery cost of Certificates 1 to Gqeberha TOTAL PRICE EXCLUDING VAT R VAT R of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026 DESCRIPTION QTY UNIT OF TOTAL PRICE (Refer to specification) MEASURE TOTAL CONTRACT INCLUDING VAT (CEILING PRICE) R GENERAL CONDITIONS OF CONTRACT The National Research Foundation cannot amend the National Treasury’s General Conditions of Contract (GCC). The National Research Foundation therefore appends Special Conditions of Contract (SCC) providing specific information relevant to a GCC clause to its the National Treasury’s General Conditions of Contract. Special Conditions specific to this bid contract are set out in this document. The NRF deems the bidders to have accessed and read the General Conditions of Contract. Whenever there is an unintended conflict, the provisions of the Special Conditions of Contract shall prevail over the General Conditions of Contract. SPECIAL CONDITIONS OF CONTRACT (AMENDMENTS TO SPECIFIC CLAUSES OF THE GENERAL CONDITIONS OF CONTRACT LISTED BELOW EACH CLAUSE IN THAT SECTION). 1 Service Provider Obligations: The service provider must exercise reasonable skill, care and diligence in rendering all services included in this procurement contract. The service provider must deliver the services during normal working hours (i.e. Monday to Friday, excluding public holidays from 08h30 to 17h00) and/or such additional hours as may be reasonably required by the NRF due to the existence of special circumstances. Services rendered outside of these hours will only be rendered by mutual agreement with the nominated person of the NRF, based on severity level. The service provider may not do anything that may prejudice or be adverse to the operations and functions of the NRF The service provider must submit such information and reports, as specified in the agreed service request, to the person nominated by the NRF, and comply with all legislation applicable in providing these services. The service provider corresponds and delivers services only to the NRF and end users of the NRF. 2 Communication: The contracted parties communicate in writing through mail, delivery, or email. The contracted party states the contract number and purchase order number, if the latter is applicable, on communication documentation. The contract party does not act upon any communication without the contract number or must verify such communication with the assigned NRF contract manager prior to acting upon it. 3 Occupational Health and Safety when working on NRF sites: All personnel performing work on NRF site/s as part of this contract are responsible to obtain safety induction. Over and above the obligations provided by the Occupational Health and Safety Act (OHS Act No and its Regulations, known as ‘the Act’), the contracted party meets with all relevant health and safety instructions as given to them by site safety personnel, where relevant. Personal protection equipment including closed safety shoes, hard hats, height safety equipment, and high visibility vests are worn at all times while on the work of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026 SPECIAL CONDITIONS OF CONTRACT site. All personnel are to obey the relevant instructions, including signage, related to restricted access and speed limits on all sites. The contracted party, once signing the contract (SBD 7), is responsible for itself, its employees, and those people affected by its operations in terms of the Act the regulations promulgated in terms thereof. The contracted party performs all work and uses equipment on site complying with the provisions of the Act. To this end, the contracted party shall make available to the NRF the valid Letter of Good Standing in terms of the COID Act and ensure its validity does not expire while executing this bid, where applicable. The contracted party furnishes its registration number with the office of the Compensation Commissioner. The contracted party enters into a Section 37.2 agreement in terms of Occupational Health and Safety Act (OHS Act No and its Regulations) that the NRF drafts. The contracted party maintains a health and safety plan complying with the requirements of The Act at the work site during the period that contracted work takes place on the site. The NRF manages the contracted party in his capacity for the execution of this contract to meet the provisions of the said Act and the regulations promulgated in terms thereof. The contracted party accepts liability for any contraventions to the Act. Each member of the contracted party’s team (including sub-contracted personnel), submit a signed indemnity form prior to entering the work site and kept in the contracted party’s health and safety file. MANAGEMENT OF PERFORMANCE LEVELS The Performance Levels are in the table below.
The NRF measures the contracted bidder’s performance against these performance levels in the execution of the contract.
The contracted bidder recognises that its failure to meet the performance levels has a material and adverse impact on the operations of NRF and that the damages from the contracted bidder’s failure to meet any performance level is not susceptible to precise determination.
The NRF excuses the contracted bidder from failing to comply with the performance levels to the extent that non-performance or delayed performance is solely and directly attributable to an act or omission of the NRF or its staff or circumstances of force majeure as referred to in this Agreement.
If the contracted bidder fails to meet any performance level
the contracted bidder shall investigate and report on the root causes of the performance level failure; promptly correct the failure and begin meeting the set performance levels;
advise the NRF as and to the extent requested by the NRF of the status of remedial efforts being undertaken with respect to such performance level failure; and
take appropriate preventative measures to prevent the recurrence of the performance level failure.
Both parties are responsible for monitoring and measuring the performance of the contracted bidder against the performance levels set in this document. The NRF deems failure by the contracted bidder to measure performance with respect to the contract specifications for any measurement period, as a failure to meet the stipulated performance levels. of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026 MANAGEMENT OF PERFORMANCE LEVELS PERFORMANCE LEVELS STATEMENT Service/Goods being Measurement Penalty/Bonus and level applicable Measured Methodology from Supply and delivery of Check the completeness No completion certificate or invoice will RPAS/UAS Quality of the delivery against the be approved and paid if the delivery is Assurance & Safety Purchase order. not satisfactory. Management System Courses and Certificates SBD 4 BIDDER’S DISCLOSURE
PURPOSE OF THE FORM Any person (natural or juristic) may make an offer or offers in terms of this invitation to bid. In line with the principles of transparency, accountability, impartiality, and ethics as enshrined in the Constitution of the Republic of South Africa and further expressed in various pieces of legislation, it is required for the bidder to make this declaration in respect of the details required hereunder. Where a person/s are listed in the Register for Tender Defaulters and / or the List of Restricted Suppliers, that person will automatically be disqualified from the bid process.
Bidder’s declaration 2.1 Is the bidder, or any of its directors / trustees / shareholders / members / partners or any person having a controlling interest1 in the enterprise, employed by the state? YES/NO 2.1.1 If so, furnish particulars of the names, individual identity numbers, and, if applicable, state employee numbers of sole proprietor/ directors / trustees / shareholders / members/ partners or any person having a controlling interest in the enterprise, in table below. 1 the power, by one person or a group of persons holding the majority of the equity of an enterprise, alternatively, the person/s having the deciding vote or power to influence or to direct the course and decisions of the enterprise. of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026 Full Name Identity Number Name of State institution 2.2 Do you, or any person connected with the bidder, have a relationship with any person who is employed by the procuring institution? YES/NO 2.2.1 If so, furnish particulars: ................................................................................................ ................................................................................................ 2.3 Does the bidder or any of its directors / trustees / shareholders / members / partners or any person having a controlling interest in the enterprise have any interest in any other related enterprise whether or not they are bidding for this contract? YES/NO 2.3.1 If so, furnish particulars: ........................................................................................ ........................................................................................
B-BBEE Details: B-BBEE Status Level Tick Applicable Box. Status Level Tick Applicable Box.
Verification Certificate ❑ Yes ❑ No Sworn ❑ Yes ❑ No
Affidavit
[A B-BBEE status level verification certificate/ sworn affidavit (for EMEs & QSEs) must be
submitted in order to qualify for preference points for B-BBEE]
❑ Yes ❑ Are you the accredited Are you a foreign-
No ❑ Yes ❑ No representative in South Africa based supplier for
[If yes [If yes, answer the for the goods /services/works the goods/services/
enclose questionnaire below] offered? works offered?
proof]
Questionnaire to bidding foreign suppliers
Is the entity a resident of the Republic of South Africa (RSA)? ❑ Yes ❑ No
Does the entity have a branch in the RSA? ❑ Yes ❑ No
Does the entity have a permanent establishment in the RSA? ❑ Yes ❑ No
Does the entity have any source of income in the RSA? ❑ Yes ❑ No
Is the entity liable in the RSA for any form of taxation? ❑ Yes ❑ No
If the answer is “No” to all of the above, then it is not a requirement to register for a tax compliance
status system pin code from the South African Revenue Service (SARS) and if not register as
per 2.3 below.
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Terms and conditions for bidding (sbd 1b)
1.1 Bids must be delivered by the stipulated time to the correct address. Late bids will not be
accepted for consideration.
1.2 All bids must be submitted on the official forms provided–(not to be re-typed) or in the
manner prescribed in the bid document. Bid pages are bound to minimise risk of lost
pages.
1.3 This bid is subject to the Preferential Procurement Policy Framework Act, 2000 and the
General Conditions Of Contract (GCC) with its special conditions of contract, and, if
applicabl
B-BBEE Requirements
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Preference Points Claim (SBD 6.1): 80/20 preference point system applicable. Maximum 80 points for price, 20 points for specific goals. Specific goals and points: B-BBEE Status Level 1-3 = 8 points; Level 4-6 = 6 points; Level 7-8 = 2 points; Supplier at least 51% Black-owned = 3 points; 51% Black female-owned = 3 points; 51% Black youth-owned = 1 point; 51% owned by People with Disabilities = 1 point; EME or QSE = 4 points. Valid B-BBEE certificate or sworn affidavit (for EMEs & QSEs) must be submitted to qualify for preference points. Failure to submit proof means points for specific goals not claimed.
Health & Safety
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdfoffered. Where these tests reflect pricing outside of the established fair price range, the
evaluators may recommend price negotiation. The NRF only negotiates price, and no other
component, with the winning bidder or, where that bidder refuses negotiation, with the next
ranked bidder in the price/preference ranking until a market related price is achieved.
Sbd 1 signature
Nb: failure to provide / or comply with any of the above particulars may
The National Research Foundation cannot amend the National Treasury’s General Conditions
of Contract (GCC). The National Research Foundation therefore appends Special Conditions
of Contract (SCC) providing specific information relevant to a GCC clause to its the National
Treasury’s General Conditions of Contract. Special Conditions specific to this bid contract are
set out in this document.
of the NRF.
2 Communication: The contracted parties communicate in writing through mail, delivery,
or email. The contracted party states the contract number and purchase order number, if
the latter is applicable, on communication documentation. The contract party does not act
upon any communication without the contract number or must verify such communication
with the assigned NRF contract manager prior to acting upon it.
3 Occupational Health and Safety when working on NRF sites: All personnel
performing work on NRF site/s as part of this contract are responsible to obtain safety
induction.
Over and above the obligations provided by the Occupational Health and Safety Act (OHS
Act No and its Regulations, known as ‘the Act’), the contracted party meets
with all relevant health and safety instructions as given to them by site safety personnel,
where relevant. Personal protection equipment including closed safety shoes, hard hats,
height safety equipment, and high visibility vests are worn at all times while on the work
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
this bid, where applicable. The contracted party furnishes its registration number with the
office of the Compensation Commissioner. The contracted party enters into a Section
37.2 agreement in terms of Occupational Health and Safety Act (OHS Act No
and its Regulations) that the NRF drafts.
the contracted party’s team (including sub-contracted personnel), submit a signed
indemnity form prior to entering the work site and kept in the contracted party’s health
and safety file.
I CERTIFY THAT THE INFORMATION FURNISHED IN PARAGRAPHS 1, 2 and 3 ABOVE IS
Contractual Terms
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdfassociates do not warrant its accuracy or completeness. The NRF makes no representation,
warranty, assurance, guarantee or endorsements to any provider/bidder concerning the
document, whether with regard to its accuracy, completeness or otherwise and the NRF shall
have no liability towards the responding service providers or any other party in connection
therewith.
1 Pricing Schedule: In terms of General Conditions of contract clause 17.1, the price
schedule remains unchanged for the duration of the contract with the NRF accepting no
changes, extensions, or additional ad hoc costs to the pricing conditions of the contract with
the exception of any price adjustments authorised in the Special Conditions of Contract for
pricing set out below:
2 Firm Quantities over the Contract Period: The NRF requires firm set quantities during
the current period with the time of delivery being determined during the contract period.
3 Estimated quantities over the Contract Period: The NRF may require further quantities
during the current period with the actual quantity and time of delivery being determined
when such quantities are needed. For bidding purposes and to establish the contract ceiling
price, the NRF provides estimated quantities of what its requirements and estimated timing
during the contract period for bidders to establish their pricing. The NRF does not provide
guarantees or commitments that it will order this entire amount during the contract’s life.
and/or services is from the contracted party only.
4 Placement of written purchase orders for actual quantities ordered: The NRF
manages the execution of this contract through the issue of written purchase orders –
stipulating quantity, description, delivery date, and the unit price as et out in this contract -
for the contracted supplies. The NRF, when issuing the written purchase order, guarantees
that the funding is available.
5 Contract Ceiling Price: With these estimates in the bid contract, the contract ceiling price
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Sbd 3.2: Pricing detail
includes both the firm quantities and the potential future quantities within the contract ceiling
price. The NRF manages the contract within the contract ceiling price by paying only for the
verified deliveries/performances in terms of the clauses of this contract. The cumulative
value of each of these invoices at the expiry of the contract is the actual total contract price.
6 Price Adjustments: In terms of General Conditions of Contract clause 17.1, the price
adjustments with the rules for application are set out below as special conditions of Contract
Clause 17.1.
material and adverse impact on the operations of NRF and that the damages from the
contracted bidder’s failure to meet any performance level is not susceptible to precise
determination.
to the extent that non-performance or delayed performance is solely and directly
attributable to an act or omission of the NRF or its staff or circumstances of force majeure
as referred to in this Agreement.
4.2 Name of company/firm...............................................................................
4.3 Company registration number: .....................................................................
4.4 Type of company/ firm
Partnership/Joint Venture / Consortium
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Preference points claimed (sbd 6.1)
One-person business/sole propriety
Close corporation
Public Company
Personal Liability Company
(Pty) Limited
Non-Profit Company
State Owned Company
[Tick applicable box]
4.5 I, the undersigned, who is duly authorised to do so on behalf of the company/firm, certify that the
points claimed, based on the specific goals as advised in the tender, qualifies the company/ firm
for the preference(s) shown and I acknowledge that:
i) The information furnished is true and correct;
ii) The preference points claimed are in accordance with the General Conditions as indicated in
paragraph 1 of this form;
iii) the event of a contract being awarded as a result of points claimed as shown in paragraphs 1.4
and 4.2, the contractor may be required to furnish documentary proof to the satisfaction of the
organ of state that the claims are correct;
iv) If the specific goals have been claimed or obtained on a fraudulent basis or any of the conditions
of contract have not been fulfilled, the organ of state may, in addition to any other remedy it may
have –
(a) disqualify the person from the tendering process;
(b) recover costs, losses or damages it has incurred or suffered as a result of that
person’s conduct;
(c) cancel the contract and claim any damages which it has suffered as a result of having
to make less favourable arrangements due to such cancellation;
(d) recommend that the tenderer or contractor, its shareholders and directors, or only the
shareholders and directors who acted on a fraudulent basis, be restricted from
obtaining business from any organ of state for a period not exceeding 10 years, after
the audi alteram partem (hear the other side) rule has been applied; and
(e ) forward the matter for criminal prosecution, if deemed necessary.
..............................................
Signature(s) of tenderer(s)
Surname and name: ...............................................................
Date: ...............................................................
of 21 Ver. Standard 2018-6bRFQ/SAEON/ELWANDLE/QA AND SMS COURSES/130/2026
Preference points claimed (sbd 6.1)
Address: ...............................................................
...............................................................
...............................................................
...............................................................
Bid submission certificate form - (sbd 1)
Special Conditions
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Special Conditions of Contract: Service provider must exercise reasonable skill, care and diligence. Services delivered during normal working hours (Mon-Fri 08h30-17h00, excl. public holidays); additional hours by mutual agreement. Communication in writing with contract and purchase order numbers. Occupational Health and Safety: personnel on NRF sites must obtain safety induction, wear PPE (closed safety shoes, hard hats, height safety equipment, high visibility vests), obey signage and speed limits. Contracted party responsible for COID Act Letter of Good Standing, registration with Compensation Commissioner, Section 37.2 agreement, health and safety plan. Performance Levels: Supply and delivery measured by completeness against purchase order; no completion certificate or invoice approved/paid if delivery unsatisfactory. Failure to meet performance levels requires root cause investigation, prompt correction, status reporting, and preventative measures.
Requirements
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Eligibility Criteria (Go/No-Go): 1. Fully completed Procurement Invitation (SBD 1) including the SBD 4, 6.1 and signed Bid Submission Certificate form. 2. Fully completed pricing schedule (SBD 3.1) / or a quotation on the company letterhead. 3. Detailed specifications provided on the quotation have met the scope of work required. 4. Proof of registration of a SACAA approved/recognised training facility. 5. Course available online. Mandatory returnable documents: Procurement Invitation (SBD 1) signed and completed including SBD 4, 6.1 and signed Bid Submission Certificate form; Proof of authority (company resolution); Proof of Registration on Central Supplier Database (CSD); Pricing (SBD 3.1) / or a quotation completed. Optional: A valid B-BBEE certificate or Sworn Affidavit. Specification eligibility: Supplier must provide evidence of capability to conduct QA & SMS courses e.g. South African Civil Aviation Authority accreditation (SACAA) or SACAA recognised certification.
Section
Source: RFQ - Quality Assurance & Safety Management Systems Course_Readvert.pdf (RFQ)Stage 1 – Compliance to submission requirements (Go/No-Go). Stage 2 – Evaluation of Bids against Technical Specifications. Stage 2A – Evaluation against Specifications including Quality per published evaluation criteria in Section D. Stage 2B – Due Diligence Interviews or Proof of Delivery/Concept against Specifications. Stage 2C – Due Diligence Research (reference letter verification). Stage 3 – Price/Preference Evaluation using 80/20 preference point system: 80 points for price, 20 points for specific goals (B-BBEE status level, black ownership, black female ownership, black youth ownership, disability ownership, EME/QSE). Lowest priced bid receives maximum price points; preference points added for final ranking. Stage 4 – Tax Compliance verification. Stage 5 – Award to highest combined score subject to administrative documentation.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
04 Gomery road - Summerstrand - Gqerberha - 6001
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
1
Last checked
11 Sept 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Key Personnel
Provinces Active
Industries
Learn how to submit a winning bid with these related articles
Win consulting, legal, accounting, and engineering service contracts with government. Learn registration requirements and proposal strategies.
Comprehensive guide to Institute of IT Professionals South Africa membership. Certification levels, requirements for ICT professionals, and how IITPSA membership enhances credibility for SITA and government IT tenders.
Definitive guide to Health Professions Council of South Africa registration for healthcare professionals bidding on government tenders. Covers the 12 professional boards, step-by-step registration, CPD requirements, foreign qualification evaluation, provincial health department tender opportunities, and how AI Tender Matching on Tenders-SA.org helps you find HPCSA-requiring contracts.
A strategic guide to getting listed on government consultancy, legal, and engineering panels. Learn why panels are the gateway to steady public sector work.
💡 Want more tendering tips and strategies?
Explore Our BlogMedian Estimate
R 7 722 415
Range
Based on 10 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Get deep intelligence on Other professional, scientific and technical activities. Unlock full pricing strategies, bid frequency, and historical win rates.