What the tender required and what the award supports
Source material and existing AI analysis appear first. Supplier conclusions remain qualified by the evidence Tenders-SA holds.
Summary
This request for quotation (RFQ) from ncome museum (msunduzi museum) seeks a licensed plumbing contractor to supply labour, materials, and equipment for installing a complete laundry facility inside a freight container at the blood river heritage site. The scope includes installing a speed queen awne8rsn top load washer, all hot/cold water supply and wastewater drainage infrastructure, weatherproof container penetrations, testing, commissioning, and certification. The successful bidder must comply with all specified technical, compliance, and submission requirements by the closing date.
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
DocumentSBD 6 1 in terms of PPR 2022 (8).docxReview complete
Description
Award analysis coverage
0 of 3 source documents fully reviewed. Unstated details are identified only after complete source review.
technical scope
13 sourced criteria
financial capacity
4 sourced criteria
pricing
1 sourced criteria
compliance returnables
14 sourced criteria
evaluation
13 sourced criteria
experience
Source analysis requires completion or review
personnel
1 sourced criteria
equipment capacity
Source analysis requires completion or review
delivery contract
Source analysis requires completion or review
equity registrations
9 sourced criteria
What the buyer was looking for
1Mandatory requirement
Attend the mandatory site briefing on 04 August 2026, 11h00 at Ncome Museum, Blood River Heritage Site, Ohaleni, 3000.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
Source: AI key requirements · requirements
Known supplier evidence
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
An award confirms appointment. It does not prove why a supplier was selected, that every qualification remains current, or that delivery was completed successfully.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
Source: SBD 6 1 in terms of PPR 2022 (8).docx
This tender requires submission of the SBD 6.1 Preference Points Claim Form in accordance with the Preferential Procurement Regulations 2022.
The form captures general bidder information, B-BBEE status, and preference points claims for specific goals: black ownership, women ownership, youth ownership, and disability ownership.
Submission Guidelines
Source: SBD 6 1 in terms of PPR 2022 (8).docx (unknown)
Submit the SBD 6.1 Preference Points Claim Form as part of the bid. Ensure all required proof of B-BBEE Status Level is included. Failure to submit proof will result in no preference points being awarded. The form must be fully completed, signed, and dated by an authorised representative.
Evaluation Criteria
Source: SBD 6 1 in terms of PPR 2022 (8).docx (unknown)
Open to all bidders who meet technical and documentation requirements.
Preference points awarded for specific goals: black ownership (100% = 12 points, 51-99% = 6 points, <51% = 0 points), women ownership (4 points), youth ownership (2 points), disability ownership (2 points).
Bidders must be registered entities (e.g., company, close corporation, sole proprietorship) with valid VAT and company registration numbers.
Compliance Requirements
Source: SBD 6 1 in terms of PPR 2022 (8).docx (unknown)
B-BBEE Status Level proof must be submitted with the bid.
Bidders must certify that all information provided is true and correct.
Fraudulent claims may result in disqualification, cost recovery, contract cancellation, or blacklisting from government contracts for up to 10 years.
Must not be listed in the Register for Tender Defaulters or List of Restricted Suppliers.
No conflicts of interest with the procuring institution or its officials.
Disclosure of any employment by an organ of state (if applicable).
Declaration of relationships with procuring institution personnel (if applicable).
Full disclosure of all linked CSD-registered companies.
Compliance Requirements
Source: REVISED SBD 4 -Annexure A.docx (unknown)
Disclose any employment by an organ of state (for bidder, directors, trustees, shareholders, members, or partners).
Disclose any relationship with employees of the procuring institution.
Disclose any interest in other related enterprises (CSD-registered or otherwise).
Failure to disclose all CSD-registered active companies linked to directors will result in disqualification.
Certify that the bid was prepared independently without collusion.
Certify no disclosure of bid terms to competitors before official opening.
Certify no prior or ongoing prohibited communications with procuring institution officials.
Be aware of penalties for false declarations, including bid rejection, Competition Commission referral, or 10-year state business restriction.
RFQRequest for Quotation - Installation of Speed Queen Washer.pdfReview complete
Description
Source: Request for Quotation - Installation of Speed Queen Washer.pdf
Install a new laundry facility within a modified freight container at Ncome Museum. Scope includes: Speed Queen AWNE8RSN Electronic Top Load Washer (10.5 kg, white) installation, hot/cold water supply infrastructure, wastewater drainage, appliance testing/commissioning, and weatherproof container penetrations. Contractor must inspect the site and verify dimensions, existing services, and conditions prior to work.
Important Dates
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Site briefing: 04 August 2026, 11h00 at Ncome Museum, Blood River Heritage Site, Ohaleni, 3000. Closing date: 11 August 2026, 16h00.
Contact Information
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Submit quotations electronically to [email protected] and [email protected] by 11 August 2026, 16h00. Late submissions will not be considered. Quotations must include: completed SBD4 form, SBD6.1 Preference Points Claim form, itemised pricing (travel, accommodation, subsistence, and related expenses included), company profile, plumbing licence details, insurance certificates, proposed commencement date, estimated completion period, warranty information, and any exclusions/assumptions.
Returnable Documents
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Submit completed and signed SBD4 form and SBD6.1 Preference Points Claim form for Specific Goals. Quotations must be submitted electronically before the closing date/time.
Evaluation Criteria
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
80/20 evaluation criteria apply as per SBD6.1 and Preferential Procurement Regulations, 2022. Bidders must submit a valid B-BBEE Certificate or Sworn Affidavit to qualify for specific goals points. Failure to submit either document will result in no allocation of these points. Mandatory requirements: valid plumbing licence, current public liability insurance, CSD registration, valid Tax Compliance PIN, CIDB GB1 grading, COIDA certificate, completed SBD4 and SBD6.1 forms, and contactable references for similar projects.
Technical Specifications
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Scope: Install a Speed Queen AWNE8RSN Electronic Top Load Washer (10.5 kg, white) and all plumbing infrastructure (hot/cold water supply, wastewater drainage) within a freight container at Ncome Museum. Key requirements:
Water supply: 20 mm (3/4”) connections, flexible braided stainless-steel hoses, isolation valves, pressure range 138–827 kPa (20–120 psi).
Drainage: Minimum 32 mm waste connection, dedicated standpipe (40–50 mm diameter, 914 mm height), traps/venting, backflow/overflow prevention.
Deliverables: As-built sketch, compliance certificates, warranty documentation, testing/commissioning records.
Exclusions: Electrical works (coordinate only).
Methodology
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Site inspection: verify container/site dimensions, water supply connections, drainage discharge points, washer location, service entry/exit points, and additional works. Water supply: install hot/cold isolation valves, 20 mm connections, stainless-steel hoses, pipe supports, and waterproof sleeves. Pressure: 138–827 kPa (20–120 psi), with regulation equipment if required. Container penetrations: drill, install protective sleeves, waterproof seal, corrosion protection, weatherproof finishing. Drainage: 32 mm waste connection, standpipe (40–50 mm diameter, 914 mm height), traps/venting, secure hose retention. Washer: position, connect supplies/drainage, level, verify stability, ensure maintenance clearances. Testing: leak/pressure tests, fill/drain cycles, operational testing.
Experience & Qualifications
Source: Request for Quotation - Installation of Speed Queen Washer.pdf
Bidders must provide contactable references for similar projects and submit a COIDA Certificate. Evaluation criteria (80/20) apply as per SBD6.1 and Preferential Procurement Regulations, 2022.
Quality Management
Source: Request for Quotation - Installation of Speed Queen Washer.pdf
Installation must comply with all applicable plumbing regulations/standards and be suitable for continuous operational use. Requirements: adequate water supply, suitable drainage, weatherproof penetrations, protected pipework, maintenance access. Testing: leak/pressure tests, fill/drain cycle verification, operational washer testing (filling, washing, draining, spinning).
Financial Requirements
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Itemised pricing required for: site inspection, water supply installation (hot/cold connections, isolation valves, fittings), container wall penetrations, wastewater drainage, standpipe installation, appliance installation/levelling, testing/commissioning, compliance certification, site clean-up. Include all costs (travel, accommodation, subsistence, etc.).
Compliance Requirements
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Mandatory documents: CIPC Report (with share of ownership), valid B-BBEE Certificate or Sworn Affidavit, CSD Report or CSD number, valid Tax Compliance Status PIN, CIDB Certificate (Grading GB 1), COIDA Certificate, completed SBD4 and SBD6.1 forms, contactable references for similar projects. Contractor must hold a valid plumbing licence, maintain public liability insurance, and comply with all applicable plumbing regulations/standards.
B-BBEE Requirements
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Valid B-BBEE Certificate or Sworn Affidavit required. Failure to submit either document will result in no allocation of specific goals points.
Health & Safety
Source: Request for Quotation - Installation of Speed Queen Washer.pdf
Contractor must maintain safe work practices, protect existing structures/finishes, and ensure secure mounting of pipework to prevent vibration-related damage. Coordinate with electrical personnel for safe separation between plumbing and electrical services.
Environmental
Source: Request for Quotation - Installation of Speed Queen Washer.pdf
Plumbing penetrations through container walls must be weatherproofed, sealed against vermin/insect ingress, and corrosion-protected. Drainage must prevent backflow, overflow, and siphoning, with connection to existing site infrastructure or approved disposal point.
Contractual Terms
Source: Request for Quotation - Installation of Speed Queen Washer.pdf
Contractor obligations: valid plumbing licence, public liability insurance, compliance with plumbing regulations/standards, qualified personnel, safe work practices, protection of existing structures, waste removal, workmanship warranty, compliance certification. Deliverables: operational washer, water supply connections, drainage system, weatherproof penetrations, testing records, warranty documentation, compliance certificates, as-built sketch.
Requirements
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Mandatory compliance: CSD registration (Proof of CSD Report or CSD number), valid Tax Compliance Status PIN, CIDB Certificate (Grading GB 1).
Section
Source: Request for Quotation - Installation of Speed Queen Washer.pdf (RFQ)
Quotations due by Tuesday, 11 August 2026, 16h00. Site briefing: 04 August 2026, 11h00.
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
2Inferred operational need
Install the Speed Queen AWNE8RSN washer (10.5 kg) with water supply pressure between 138–827 kPa, drainage with minimum 32 mm waste connection and 40–50 mm standpipe (914 mm height), and ensure weatherproof, corrosion-protected container penetrations.
Threshold: minimum 32 mm waste connection and 40–50 mm standpipe (914 mm height
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document. No source document identifier is stored for this item.
Source: AI key requirements · requirements
Known supplier evidence
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
3Mandatory requirement
Install a new laundry facility within a modified freight container at Ncome Museum. Scope includes: Speed Queen AWNE8RSN Electronic Top Load Washer (10.5 kg, white) installation, hot/cold water supply infrastructure, wastewater drainage, appliance testing/commissioning, and weatherproof container penetrations. Contractor must inspect the site and verify dimensions, existing services, and conditions prior to work.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
5Mandatory requirement
Plumbing penetrations through container walls must be weatherproofed, sealed against vermin/insect ingress, and corrosion-protected. Drainage must prevent backflow, overflow, and siphoning, with connection to existing site infrastructure or approved disposal point.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
8Inferred operational need
Scope: Install a Speed Queen AWNE8RSN Electronic Top Load Washer (10.5 kg, white) and all plumbing infrastructure (hot/cold water supply, wastewater drainage) within a freight container at Ncome Museum. Key requirements:
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document. No source document identifier is stored for this item.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
16Inferred operational need
Itemised pricing required for: site inspection, water supply installation, hot/cold connections, isolation valves/fittings, container wall penetrations, wastewater drainage, standpipe installation, appliance installation/levelling, testing/commissioning, compliance certification, site clean-up. Include all costs (travel, accommodation, subsistence, etc.).
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document. Inferred from stored analysis; verify against the source document. No source document identifier is stored for this item.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
17Mandatory requirement
Submit quotations electronically to [email protected] and [email protected] by 11 August 2026, 16h00. Late submissions will not be considered. Quotations must include: completed SBD4 form, SBD6.1 Preference Points Claim form, itemised pricing (travel, accommodation, subsistence, and related expenses included), company profile, plumbing licence details, insurance certificates, proposed commencement date, estimated completion period, warranty information, and any exclusions/assumptions.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
18Inferred operational need
Provide itemised pricing covering all listed items (site inspection, water supply, penetrations, drainage, standpipe, appliance installation, testing, certification, clean-up) and include all travel, accommodation, and related expenses.
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document. No source document identifier is stored for this item.
Source: AI key requirements · requirements
Known supplier evidence
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
19Inferred operational need
Submit quotations electronically to [email protected] and [email protected] by 11 August 2026, 16h00; late submissions will not be considered.
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document. No source document identifier is stored for this item.
Source: AI key requirements · requirements
Known supplier evidence
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
20Inferred operational need
Perform testing and commissioning: leak tests, pressure verification, fill/drain cycle tests, and operational washer testing; provide as-built sketch, compliance certificates, and warranty documentation.
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document. No source document identifier is stored for this item.
Source: AI key requirements · requirements
Known supplier evidence
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
21Inferred operational need
For administrative enquiries: Mr. Samkelo Tabata, Email: [email protected], Telephone: 087 527 0823. Copy submissions to [email protected].
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
33Mandatory requirement
Bidders must provide contactable references for similar projects and submit a COIDA Certificate. Evaluation criteria (80/20) apply as per SBD6.1 and Preferential Procurement Regulations, 2022.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
35Mandatory requirement
Submit completed and signed SBD4 form and SBD6.1 Preference Points Claim form for Specific Goals. Quotations must be submitted electronically before the closing date/time.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
46Mandatory requirement
Contractor must maintain safe work practices, protect existing structures/finishes, and ensure secure mounting of pipework to prevent vibration-related damage. Coordinate with electrical personnel for safe separation between plumbing and electrical services.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
47Mandatory requirement
Provide mandatory documents: CIPC Report, valid B-BBEE Certificate or Sworn Affidavit, CSD Report/Number, Tax Compliance PIN, CIDB Certificate (GB1), COIDA Certificate, completed SBD4 and SBD6.1 forms, and contactable references.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
Source: AI key requirements · requirements
Known supplier evidence
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
48Scored criterion
80/20 evaluation criteria apply as per SBD6.1 and Preferential Procurement Regulations, 2022. Bidders must submit a valid B-BBEE Certificate or Sworn Affidavit to qualify for specific goals points. Failure to submit either document will result in no allocation of these points.
Why it matters: The source places this item in the evaluation criteria; the recorded weight or threshold is shown when available.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
51Mandatory requirementConflicting classification
80/20 evaluation criteria apply as per SBD6.1 and Preferential Procurement Regulations, 2022. Bidders must submit a valid B-BBEE Certificate or Sworn Affidavit to qualify for specific goals points. Failure to submit either document will result in no allocation of these points. Mandatory requirements: valid plumbing licence, current public liability insurance, CSD registration, valid Tax Compliance PIN, CIDB GB1 grading, COIDA certificate, completed SBD4 and SBD6.1 forms, and contactable references for similar projects.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Conflicting evidence
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
Relevant records disagree; review the cited sources and dates.
52Mandatory requirement
Mandatory documents: CIPC Report (with share of ownership), valid B-BBEE Certificate or Sworn Affidavit, CSD Report or CSD number, valid Tax Compliance Status PIN, CIDB Certificate (Grading GB 1), COIDA Certificate, completed SBD4 and SBD6.1 forms, contactable references for similar projects. Contractor must hold a valid plumbing licence, maintain public liability insurance, and comply with all applicable plumbing regulations/standards.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
53Inferred operational need
The form captures general bidder information, B-BBEE status, and preference points claims for specific goals: black ownership, women ownership, youth ownership, and disability ownership.
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
54Mandatory requirement
Submit the SBD 6.1 Preference Points Claim Form as part of the bid. Ensure all required proof of B-BBEE Status Level is included. Failure to submit proof will result in no preference points being awarded. The form must be fully completed, signed, and dated by an authorised representative.
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
The linked award records SZM CIVIL AND PLUMBING as appointed for this tender. Recorded contract value: 81951.88 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
APPOINTMENT OF SERVICE PROVIDER(S) FOR THE SUPPLY AND INSTALLATION OF QUEUE MANAGEMENT SYSTEM INFRASTRUCTURE FOR SASSA LOCAL OFFICES AT KZNSASSA:08-25-ICT-KZN