Closed: Internet services for app system RFQ by border management authority

Quality Management

Source: FINAL BMA QUOTE PACK AUG 2026 - RFQ00131.pdf

a. The goods supplied shall conform to the standards mentioned in the bidding documents and specifications.

Use of contract documents and information; inspection.

a. The supplier shall not, without the purchaser’s prior written consent, disclose the contract, or any provision thereof, or any

specification, plan, drawing, pattern, sample, or information furnished by or on behalf of the purchaser in connection therewith, to

any person other than a person employed by the supplier in the performance of the contract. Disclosure to any such employed

person shall be made in confidence and shall extend only so far as may be necessary for purposes of such performance.

b. The supplier shall not, without the purchaser’s prior written consent, make use of any document or information mentioned in GCC

clause 5.1 except for purposes of performing the contract.

c. Any document, other than the contract itself mentioned in GCC clause 5.1 shall remain the property of the purchaser and shall be

returned (all copies) to the purchaser on completion of the supplier’s performance under the contract if so required by the

purchaser.

d. The supplier shall permit the purchaser to inspect the supplier’s records relating to the performance of the supplier and to have

them audited by auditors appointed by the purchaser, if so required by the purchaser.

8.1 All pre-bidding testing will be for the account of the bidder.

8.2 If it is a bid condition that supplies to be produced or services to be rendered should at any stage during production or execution

or on completion be subject to inspection, the premises of the bidder or contractor shall be open, at all reasonable hours, for

inspection by a representative of the Department or an organization acting on behalf of the Department.

8.3 If there are no inspection requirements indicated in the bidding documents and no mention is made in the contract, but during

the contract period it is decided that inspections shall be carried out, the purchaser shall itself make the necessary

arrangements, including payment arrangements with the testing authority concerned.

8.4 If the inspections, tests and analyses referred to in clauses 8.2 and 8.3 show the supplies to be in accordance with the contract

requirements, the cost of the inspections, tests and analyses shall be defrayed by the purchaser.

8.5 Where the supplies or services referred to in clauses 8.2 and 8.3 do not comply with the contract requirements, irrespective of

whether such supplies or services are accepted or not, the cost in connection with these inspections, tests or analyses shall be

defrayed by the supplier.

8.6 Supplies and services which are referred to in clauses 8.2 and 8.3 and which do not comply with the contract requirements may

be rejected.

8.7 Any contract supplies may on or after delivery be inspected, tested or analyzed and may be rejected if found not to comply with

the requirements of the contract. Such rejected supplies shall be held at the cost and risk of the supplier who shall, when called

upon, remove them immediately at his own cost and forthwith substitute them with supplies which do comply with the

requirements of the contract. Failing such removal the rejected supplies shall be returned at the suppliers cost and risk. Should

the supplier fail to provide the substitute supplies forthwith, the purchaser may, without giving the supplier further opportunity to

substitute the rejected supplies, purchase such supplies as may be necessary at the expense of the supplier.

8.8 The provisions of clauses 8.4 to 8.7 shall not prejudice the right of the purchaser to cancel the contract on account of a breach of

the conditions thereof, or to act in terms of Clause 23 of GCC.

Health & Safety

Source: FINAL BMA QUOTE PACK AUG 2026 - RFQ00131.pdf

completed online without changing any words. Photocopies of the original Bids documentation

may be used, but an original signature must appear on such photocopies.

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

I CERTIFY THAT THE INFORMATION FURNISHED IN PARAGRAPHS 1, 2 and 3 ABOVE IS

1.1 “Closing time” means the date and hour specified in the bidding documents for the receipt of bids.

1.2 “Contract” means the written agreement entered into between the purchaser and the supplier, as recorded in the contract form

signed by the parties, including all attachments and appendices thereto and all documents incorporated by reference therein.

1.3 “Contract price” means the price payable to the supplier under the contract for the full and proper performance of his contractual

obligations.

1.4 “Corrupt practice” means the offering, giving, receiving, or soliciting of anything of value to influence the action of a public official

in the procurement process or in contract execution.

1.5 "Countervailing duties" are imposed in cases where an enterprise abroad is subsidized by its government and encouraged to

market its products internationally.

1.6 “Country of origin” means the place where the goods were mined, grown or produced or from which the services are supplied.

3.1 Unless otherwise indicated in the bidding documents, the purchaser shall not be liable for any expense incurred in the preparation

and submission of a bid. Where applicable a non-refundable fee for documents may be charged.

3.2 With certain exceptions, invitations to bid are only published in the Government Tender Bulletin. The Government Tender Bulletin

may be obtained directly from the Government Printer, Private Bag X85, Pretoria 0001, or accessed electronically from

www.treasury.gov.za

10.1 Delivery of the goods shall be made by the supplier in accordance with the terms specified in the contract. The details of

shipping and/or other documents to be furnished by the supplier are specified in SCC.

10.2 Documents to be submitted by the supplier are specified in SCC.

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

import, the State is not liable for any amount so required or imposed, or for the amount of any such increase. When, after the

said date, such a provisional payment is no longer required or any such anti-dumping or countervailing right is abolished, or

where the amount of such provisional payment or any such right is reduced, any such favourable difference shall on demand be

paid forthwith by the contractor to the State or the State may deduct such amounts from moneys (if any) which may otherwise be

due to the contractor in regard to supplies or services which he delivered or rendered, or is to deliver or render in terms of the

contract or any other contract or any other amount which may be due to him.

31.1 Every written acceptance of a bid shall be posted to the supplier concerned by registered or certified mail and any other notice to

him shall be posted by ordinary mail to the address furnished in his bid or to the address notified later by him in writing and such

posting shall be deemed to be proper service of such notice

31.2 The time mentioned in the contract documents for performing any act after such aforesaid notice has been given, shall be

reckoned from the date of posting of such notice.

Contractual Terms

Source: FINAL BMA QUOTE PACK AUG 2026 - RFQ00131.pdf

15.1 The supplier warrants that the goods supplied under the contract are new, unused, of the most recent or current models, and

that they incorporate all recent improvements in design and materials unless provided otherwise in the contract. The supplier

further warrants that all goods supplied under this contract shall have no defect, arising from design, materials, or workmanship

(except when the design and/or material is required by the purchaser’s specifications) or from any act or omission of the

supplier, that may develop under normal use of the supplied goods in the conditions prevailing in the country of final destination.

15.2 This warranty shall remain valid for twelve (12) months after the goods, or any portion thereof as the case may be, have been

delivered to and accepted at the final destination indicated in the contract, or for eighteen (18) months after the date of shipment

from the port or place of loading in the source country, whichever period concludes earlier, unless specified otherwise in SCC.

15.3 The purchaser shall promptly notify the supplier in writing of any claims arising under this warranty.

15.4 Upon receipt of such notice, the supplier shall, within the period specified in SCC and with all reasonable speed, repair or

replace the defective goods or parts thereof, without costs to the purchaser.

Supply Chain Management Quotation Pack

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

15.5 If the supplier, having been notified, fails to remedy the defect(s) within the period specified in SCC, the purchaser may proceed

to take such remedial action as may be necessary, at the supplier’s risk and expense and without prejudice to any other rights

which the purchaser may have against the supplier under the contract.

16 Payment

16.1 The method and conditions of payment to be made to the supplier under this contract shall be specified in SCC.

16.2 The supplier shall furnish the purchaser with an invoice accompanied by a copy of the delivery note and upon fulfillment of other

obligations stipulated in the contract.

16.3 Payments shall be made promptly by the purchaser, but in no case later than thirty (30) days after submission of an invoice or

claim by the supplier.

16.4 Payment will be made in Rand unless otherwise stipulated in SCC.

17 Prices

17.1 Prices charged by the supplier for goods delivered and services performed under the contract shall not vary from the prices

quoted by the supplier in his bid, with the exception of any price adjustments authorized in SCC or in the purchaser’s request for

bid validity extension, as the case may be.

18 Contract amendments

18.1 No variation in or modification of the terms of the contract shall be made except by written amendment signed by the parties

concerned.

19 Assignment

19.1 The supplier shall not assign, in whole or in part, its obligations to perform under the contract, except with the purchaser’s prior

written consent.

20 Subcontracts

20.1 The supplier shall notify the purchaser in writing of all subcontracts awarded under this contracts if not already specified in the

bid. Such notification, in the original bid or later, shall not relieve the supplier from any liability or obligation under the contract.

21 Delays in the supplier’s performance

21.1 Delivery of the goods and performance of services shall be made by the supplier in accordance with the time schedule

prescribed by the purchaser in the contract.

21.2 If at any time during performance of the contract, the supplier or its subcontractor(s) should encounter conditions impeding timely

delivery of the goods and performance of services, the supplier shall promptly notify the purchaser in writing of the fact of the

delay, its likely duration and its cause(s). As soon as practicable after receipt of the supplier’s notice, the purchaser shall

evaluate the situation and may at his discretion extend the supplier’s time for performance, with or without the imposition of

penalties, in which case the extension shall be ratified by the parties by amendment of contract.

21.3 No provision in a contract shall be deemed to prohibit the obtaining of supplies or services from a national department, provincial

department, or a local authority.

21.4 The right is reserved to procure outside of the contract small quantities or to have minor essential services executed if an

emergency arises, the supplier’s point of supply is not situated at or near the place where the supplies are required, or the

supplier’s services are not readily available.

21.5 Except as provided under GCC Clause 25, a delay by the supplier in the performance of its delivery obligations shall render the

supplier liable to the imposition of penalties, pursuant to GCC Clause 22, unless an extension of time is agreed upon pursuant to

GCC Clause 21.2 without the application of penalties.

21.6 Upon any delay beyond the delivery period in the case of a supplies contract, the purchaser shall, without cancelling the

Supply Chain Management Quotation Pack

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

contract, be entitled to purchase supplies of a similar quality and up to the same quantity in substitution of the goods not supplied

in conformity with the contract and to return any goods delivered later at the supplier’s expense and risk, or to cancel the

contract and buy such goods as may be required to complete the contract and without prejudice to his other rights, be entitled to

claim damages from the supplier.

22 Penalties

22.1 Subject to GCC Clause 25, if the supplier fails to deliver any or all of the goods or to perform the services within the period(s)

specified in the contract, the purchaser shall, without prejudice to its other remedies under the contract, deduct from the contract

price, as a penalty, a sum calculated on the delivered price of the delayed goods or unperformed services using the current

prime interest rate calculated for each day of the delay until actual delivery or performance. The purchaser may also consider

termination of the contract pursuant to GCC Clause 23.

23 Termination for default

23.1 The purchaser, without prejudice to any other remedy for breach of contract, by written notice of default sent to the supplier, may

terminate this contract in whole or in part:

(a) if the supplier fails to deliver any or all of the goods within the period(s) specified in the contract, or within any

extension thereof granted by the purchaser pursuant to GCC Clause 21.2;

(b) if the Supplier fails to perform any other obligation(s) under the contract; or

or in executing the contract.

23.2 In the event the purchaser terminates the contract in whole or in part, the purchaser may procure, upon such terms and in such

manner as it deems appropriate, goods, works or services similar to those undelivered, and the supplier shall be liable to the

purchaser for any excess costs for such similar goods, works or services. However, the supplier shall continue performance of

the contract to the extent not terminated.

23.3 Where the purchaser terminates the contract in whole or in part, the purchaser may decide to impose a restriction penalty on the

supplier by prohibiting such supplier from doing business with the public sector for a period not exceeding 10 years.

23.4 If a purchaser intends imposing a restriction on a supplier or any person associated with the supplier, the supplier will be allowed

a time period of not more than fourteen (14) days to provide reasons why the envisaged restriction should not be imposed.

Should the supplier fail to respond within the stipulated fourteen (14) days the purchaser may regard the intended penalty as not

objected against and may impose it on the supplier.

23.5 Any restriction imposed on any person by the Accounting Officer / Authority will, at the discretion of the Accounting Officer /

Authority, also be applicable to any other enterprise or any partner, manager, director or other person who wholly or partly

exercises or exercised or may exercise control over the enterprise of the first-mentioned person, and with which enterprise or

person the first-mentioned person, is or was in the opinion of the Accounting Officer / Authority actively associated.

23.6 If a restriction is imposed, the purchaser must, within five (5) working days of such imposition, furnish the National Treasury, with

the following information:

a. the name and address of the supplier and / or person restricted by the purchaser;

b. the date of commencement of the restriction

c. the period of restriction; and

d. the reasons for the restriction.

23.6.1 These details will be loaded in the National Treasury’s central database of suppliers or persons prohibited from doing

business with the public sector.

23.7 If a court of law convicts a person of an offence as contemplated in sections 12 or 13 of the Prevention and Combating of

Corrupt Activities Act, No. , the court may also rule that such person’s name be endorsed on the Register for Tender

Defaulters. When a person’s name has been endorsed on the Register, the person will be prohibited from doing business with

the public sector for a period not less than five years and not more than 10 years. The National Treasury is empowered to

determine the period of restriction and each case will be dealt with on its own merits. According to section 32 of the Act the

24 Anti-dumping and countervailing duties and rights

24.1 When, after the date of bid, provisional payments are required, or antidumping or countervailing duties are imposed, or the

amount of a provisional payment or anti-dumping or countervailing right is increased in respect of any dumped or subsidized

Supply Chain Management Quotation Pack

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

import, the State is not liable for any amount so required or imposed, or for the amount of any such increase. When, after the

said date, such a provisional payment is no longer required or any such anti-dumping or countervailing right is abolished, or

where the amount of such provisional payment or any such right is reduced, any such favourable difference shall on demand be

paid forthwith by the contractor to the State or the State may deduct such amounts from moneys (if any) which may otherwise be

due to the contractor in regard to supplies or services which he delivered or rendered, or is to deliver or render in terms of the

contract or any other contract or any other amount which may be due to him.

25 Force Majeure

25.1 Notwithstanding the provisions of GCC Clauses 22 and 23, the supplier shall not be liable for forfeiture of its performance

security, damages, or termination for default if and to the extent that his delay in performance or other failure to perform his

obligations under the contract is the result of an event of force majeure.

25.2 If a force majeure situation arises, the supplier shall promptly notify the purchaser in writing of such condition and the cause

thereof. Unless otherwise directed by the purchaser in writing, the supplier shall continue to perform its obligations under the

contract as far as is reasonably practical, and shall seek all reasonable alternative means for performance not prevented by the

force majeure event.

26 Termination for insolvency

26.1 The purchaser may at any time terminate the contract by giving written notice to the supplier if the supplier becomes bankrupt or

otherwise insolvent. In this event, termination will be without compensation to the supplier, provided that such termination will not

prejudice or affect any right of action or remedy which has accrued or will accrue thereafter to the purchaser.

27 Settlement of Disputes

27.1 If any dispute or difference of any kind whatsoever arises between the purchaser and the supplier in connection with or arising

out of the contract, the parties shall make every effort to resolve amicably such dispute or difference by mutual consultation.

27.2 If, after thirty (30) days, the parties have failed to resolve their dispute or difference by such mutual consultation, then either the

purchaser or the supplier may give notice to the other party of his intention to commence with mediation. No mediation in respect

of this matter may be commenced unless such notice is given to the other party.

27.3 Should it not be possible to settle a dispute by means of mediation, it may be settled in a South African court of law.

27.4 Mediation proceedings shall be conducted in accordance with the rules of procedure specified in the SCC.

27.5 Notwithstanding any reference to mediation and/or court proceedings herein,

(a) the parties shall continue to perform their respective obligations under the contract unless they otherwise agree; and

(b) the purchaser shall pay the supplier any monies due the supplier.

28 Limitation of liability

28.1 Except in cases of criminal negligence or willful misconduct, and in the case of infringement pursuant to Clause 6;

i. the supplier shall not be liable to the purchaser, whether in contract, tort, or otherwise, for any indirect or consequential

loss or damage, loss of use, loss of production, or loss of profits or interest costs, provided that this exclusion shall not

apply to any obligation of the supplier to pay penalties and/or damages to the purchaser; and

ii. the aggregate liability of the supplier to the purchaser, whether under the contract, in tort or otherwise, shall not exceed

the total contract price, provided that this limitation shall not apply to the cost of repairing or replacing defective

equipment.

29 Governing language

29.1 The contract shall be written in English. All correspondence and other documents pertaining to the contract that is exchanged by

the parties shall also be written in English.

30 Applicable law

30.1 The contract shall be interpreted in accordance with South African laws, unless otherwise specified in SCC.

Supply Chain Management Quotation Pack

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

31 Notices

31.1 Every written acceptance of a bid shall be posted to the supplier concerned by registered or certified mail and any other notice to

him shall be posted by ordinary mail to the address furnished in his bid or to the address notified later by him in writing and such

posting shall be deemed to be proper service of such notice

31.2 The time mentioned in the contract documents for performing any act after such aforesaid notice has been given, shall be

reckoned from the date of posting of such notice.

32 Taxes and duties

32.1 A foreign supplier shall be entirely responsible for all taxes, stamp duties, license fees, and other such levies imposed outside

the purchaser’s country.

32.2 A local supplier shall be entirely responsible for all taxes, duties, license fees, etc., incurred until delivery of the contracted goods

to the purchaser.

32.3 No contract shall be concluded with any bidder whose tax matters are not in order. Prior to the award of a bid the Department

must be in possession of a tax clearance certificate, submitted by the bidder. This certificate must be an original issued by the

South African Revenue Services.

33 National Industrial Participation (NIP) Programme

33.1 The NIP Programme administered by the Department of Trade and Industry shall be applicable to all contracts that are subject to

the NIP obligation.

Prohibition of Restrictive practices

34.1 In terms of section 4 (1) (b) (iii) of the Competition Act No. , as amended, an agreement between, or concerted practice

by, firms, or a decision by an association of firms, is prohibited if it is between parties in a horizontal relationship and if a bidder (s) is

/ are or a contractor(s) was / were involved in collusive bidding (or bid rigging).

34.2 If a bidder(s) or contractor(s), based on reasonable grounds or evidence obtained by the purchaser, has / have engaged in the

restrictive practice referred to above, the purchaser may refer the matter to the Competition Commission for investigation and

possible imposition of administrative penalties as contemplated in the Competition Act No. .

Supply Chain Management Quotation Pack

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

Specifications or terms of reference

Office of the Commissioner: Border Management Authority

No: 67 Koranna Avenue, Doringkloof, Centurion 0157

012 432 6629

Request or quotation for procurement of internet services for app system for a period of 24 months.

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

Not to make any award in this bid or accept any proposals submitted,
Award the project to more than one (1) Respondent for the same activity
Request further technical/functional information from any Respondent after the closing date,
Verify information and documentation of the Respondent(s),
Not to accept any of the bid document submitted,
To withdraw or amend any of the bid conditions by notice in writing to all Respondents prior to

closing of the bid and post award, and

If an incorrect award has been made to remedy the matter in any lawful manner it may deem fit.
Apply objective criteria
Service providers are not allowed to utilize employees that are non-South African Citizen, this may

lead to contract termination unless vetted and having work permit.

The service provider will be paid in South African Rands, on a fixed price (Inclusive of VAT) for the

service rendered.

Payment will be made within 30 days of receipt of the approved invoice according to an agreed

payment schedule.

Payment will be against the key deliverables as set out in section 4 above, provided professional-level

quality standards have been met. Disputes as to what constitutes a reasonable standard will be

referred to an agreed provider of arbitration services.

Disbursements must not exceed 10% of the total amount paid to the service provider and will be paid

only if original receipts are provided against a list of expenses that are agreed in advance of the costs

being incurred.

Delivery basis ..........................................

Note: All delivery costs must be included in the bid price, for delivery at the prescribed destination.

** “all applicable taxes” includes value- added tax, pay as you earn, income tax, unemployment

insurance fund contributions and skills development levies.

*Delete if not applicable

Invitation to Quote Standardized August 2026

Description: provisioning of internet services for app system RFQ number: h004l2708rfq00131

4.5. Type of company/ firm

 Partnership/Joint Venture / Consortium

 One-person business/sole propriety

 Close corporation

 Public Company

 Personal Liability Company

 (Pty) Limited

 Non-Profit Company

 State Owned Company

[Tick applicable box]

4.6. I, the undersigned, who is duly authorised to do so on behalf of the company/firm, certify

that the points claimed, based on the specific goals as advised in the tender, qualifies the

company/ firm for the preference(s) shown and I acknowledge that:

i) The information furnished is true and correct;

ii) The preference points claimed are in accordance with the General Conditions as

indicated in paragraph 1 of this form;

iii) In the event of a contract being awarded as a result of points claimed as shown in

paragraphs 1.4 and 4.2, the contractor may be required to furnish documentary proof

to the satisfaction of the organ of state that the claims are correct;

iv) If the specific goals have been claimed or obtained on a fraudulent basis or any of the

conditions of contract have not been fulfilled, the organ of state may, in addition to any

other remedy it may have –

(a) disqualify the person from the tendering process;

(b) recover costs, losses or damages it has incurred or suffered as a result

of that person’s conduct;

result of having to make less favourable arrangements due to such

cancellation;

(d) recommend that the tenderer or contractor, its shareholders and

directors, or only the shareholders and directors who acted on a

fraudulent basis, be restricted from obtaining business from any organ of

state for a period not exceeding 10 years, after the audi alteram partem

(hear the other side) rule has been applied; and

(e) forward the matter for criminal prosecution, if deemed necessary.

..............................................

Signature(s) of tenderer(s)

Surname and name: ................................................................

Date: ...............................................................

Address: ...............................................................

...............................................................

commercially recognized new product results that is substantially different in basic characteristics or in purpose or utility from its

components.

1.7 “Day” means calendar day.

1.8 “Delivery” means delivery in compliance of the conditions of the contract or order.

1.9 “Delivery ex stock” means immediate delivery directly from stock actually on hand.

1.10 “Delivery into consignees store or to his site” means delivered and unloaded in the specified store or depot or on the specified

site in compliance with the conditions of the contract or order, the supplier bearing all risks and charges involved until the

supplies are so delivered and a valid receipt is obtained.

1.11 "Dumping" occurs when a private enterprise abroad market its goods on own initiative in the RSA at lower prices than that of the

country of origin and which have the potential to harm the local industries in the RSA.

1.12 ”Force majeure” means an event beyond the control of the supplier and not involving the supplier’s fault or negligence and not

foreseeable. Such events may include, but is not restricted to, acts of the purchaser in its sovereign capacity, wars or

revolutions, fires, floods, epidemics, quarantine restrictions and freight embargoes.

1.13 “Fraudulent practice” means a misrepresentation of facts in order to influence a procurement process or the execution of a

contract to the detriment of any bidder, and includes collusive practice among bidders (prior to or after bid submission) designed

to establish bid prices at artificial non-competitive levels and to deprive the bidder of the benefits of free and open competition.

1.14 “GCC” means the General Conditions of Contract.

1.15 “Goods” means all of the equipment, machinery, and/or other materials that the supplier is required to supply to the purchaser

under the contract.

1.16 “Imported content” means that portion of the bidding price represented by the cost of components, parts or materials which have

been or are still to be imported (whether by the supplier or his subcontractors) and which costs are inclusive of the costs abroad,

plus freight and other direct importation costs such as landing costs, dock dues, import duty, sales duty or other similar tax or

duty at the South African place of entry as well as transportation and handling charges to the factory in the Republic where the

supplies covered by the bid will be manufactured.

1.17 “Local content” means that portion of the bidding price which is not included in the imported content provided that local

manufacture does take place.

1.18 “Manufacture” means the production of products in a factory using labour, materials, components and machinery and includes

6.1 The supplier shall indemnify the purchaser against all third-party claims of infringement of patent, trademark, or industrial design

rights arising from use of the goods or any part thereof by the purchaser.

7.1 Within thirty (30) days of receipt of the notification of contract award, the successful bidder shall furnish to the purchaser the

performance security of the amount specified in SCC.

7.2 The proceeds of the performance security shall be payable to the purchaser as compensation for any loss resulting from the

supplier’s failure to complete his obligations under the contract.

7.3 The performance security shall be denominated in the currency of the contract or in a freely convertible currency acceptable to

the purchaser and shall be in one of the following forms:

7.4 a bank guarantee or an irrevocable letter of credit issued by a reputable bank located in the purchaser’s country or abroad,

acceptable to the purchaser, in the form provided in the bidding documents or another form acceptable to the purchaser; or

7.5 a cashier’s or certified cheque

7.6 The performance security will be discharged by the purchaser and returned to the supplier not later than thirty (30) days following

the date of completion of the supplier’s performance obligations under the contract, including any warranty obligations, unless

otherwise specified in SCC.

11.1 The goods supplied under the contract shall be fully insured in a freely convertible currency against loss or damage incidental to

manufacture or acquisition, transportation, storage and delivery in the manner specified in the SCC.

11.2 Upon appointment by the Head of Department the service provider will be required to have a Professional Indemnity insurance

of a minimum cover of R160 million.

13.1 The supplier may be required to provide any or all of the following services, including additional services, if any, specified in

Scc:

(a) performance or supervision of on-site assembly and/or commissioning of the supplied goods;

(b) furnishing of tools required for assembly and/or maintenance of the supplied goods;

(d) performance or supervision or maintenance and/or repair of the supplied goods, for a period of time agreed by the

parties, provided that this service shall not relieve the supplier of any warranty obligations under this contract; and

(e) training of the purchaser’s personnel, at the supplier’s plant and/or on-site, in assembly, start-up, operation,

maintenance, and/or repair of the supplied goods.

13.2 Prices charged by the supplier for incidental services, if not included in the contract price for the goods, shall be agreed upon in

advance by the parties and shall not exceed the prevailing rates charged to other parties by the supplier for similar services.

14.1 As specified in SCC, the supplier may be required to provide any or all of the following materials, notifications, and information

pertaining to spare parts manufactured or distributed by the supplier:

(a) such spare parts as the purchaser may elect to purchase from the supplier, provided that this election shall not relieve

the supplier of any warranty obligations under the contract; and

(b) in the event of termination of production of the spare parts:

(i) Advance notification to the purchaser of the pending termination, in sufficient time to permit the purchaser to

procure needed requirements; and

(ii) following such termination, furnishing at no cost to the purchaser, the blueprints, drawings, and specifications of

the spare parts, if requested.

15 Warranty