Purchase and removal of vandalized 5 mva transformer at ga-maja substation (ESKOM, limpopo)

Open to South African registered companies with valid tax clearance, BBBEE compliance, and Eskom vendor registration; must submit a detailed methodology, risk assessment, and cost breakdown.

Scope: Purchase, collect, and remove a vandalized 5 MVA transformer (Serial Number: T-2199 39-112) located at Ga-Maja Substation. Deliverable: Physical removal of the specified transformer from the site. The document includes pictures and nameplate details of the transformer for identification.

Scope: Purchase, collect, and remove a vandalized 5 MVA transformer (serial number T-2199 39-112) from Ga-Maja Substation. Compliance with SHE specifications and the Occupational Health and Safety Act, 1993, is required.

Closing date: 31 May 2023

Eligibility criteria inferred from the document: (1) The applicant must be a legally registered employer in their own right; (2) Must accept duties as prescribed in the Occupational Health and Safety Act No. 85 of 1993 (as amended); (3) Must have a duly authorized representative to sign the Section 37(2) Agreement on behalf of the contractor/supplier; (4) Must demonstrate capacity to handle the removal of a 5 MVA transformer from an Eskom substation; (5) Must be willing to be bound by Eskom's SHE specifications. Note: Specific commercial eligibility criteria (e.g., CIDB grading, tax compliance, B-BBEE status) are not detailed in the provided document excerpt.

Scope: Purchase, collect, and remove a vandalized 5 MVA transformer (serial number T-2199 39-112) from Ga-Maja Substation. Compliance with Occupational Health and Safety Act, 1993, is mandatory for all work performed and machinery/plant used.

Mandatory compliance with the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993). Contractor must acknowledge in writing (via Section 37(2) Agreement) that they are an employer with duties under the Act. Contractor must adhere to Eskom’s SHE (Safety, Health, and Environment) specifications for the project/service. All employees must comply with the Act’s provisions.

The Section 37(2) Agreement is a formal contract between Eskom (or its subsidiary) and the contractor/supplier to ensure compliance with the Occupational Health and Safety Act, 1993. The agreement is effective from December 2020 and reviewed in December 2025.

The agreement is binding and constitutes the sole arrangement between the parties. No part of the document may be reproduced without Eskom’s expressed consent.

Eskom and its subsidiaries will conduct business with respect and care for people to ensure that no

operating condition or urgency of service endangers the life of anyone or causes injury or damage

to the environment. Eskom is committed to preventing all work-related injuries. In fulfilling this

commitment to protect people, the environment and property, management will provide and

maintain a safe and healthy work environment, in accordance with industry standards and in

compliance with legislative requirements.

At-risk behaviour leads to incidents. Life-saving Rules are safety rules that have been created to

enforce zero tolerance for serious at-risk behaviours. These rules have been determined in terms

of the consequences of the behaviours they describe, that is, if a particular set of behaviours or

actions has a very high probability of causing disabilities or fatalities when performed.

The Eskom Life-saving Rules complement our existing safety best practices and are safety rules to

be followed at all locations.

The Life-saving Rules apply to all Eskom employees, agents, consultants, and contractors. Visitors

to Eskom should also respect and adhere to these rules as applicable and could be instructed to

leave the Eskom premises with immediate effect should they refuse to do so.

2. Supporting Clauses

2.1 Scope

This standard shall apply at all Eskom sites with the intention to promote a safe working

environment for all Eskom employees, agents, consultants, and contractors. Visitors to Eskom

should also respect and adhere to these rules, as applicable.

2.1.1 Purpose

This standard clarifies the five most prominent causes of serious injuries and fatalities within

Eskom, and Eskom’s intention to enforce “ZERO TOLERANCE” with respect to non-adherence to

these rules, due to the potential consequences of serious injury or fatality at the workplace.

2.1.2 Applicability

This standard shall apply throughout Eskom Holdings SOC Limited, its divisions, subsidiaries, and

entities wherein Eskom has a controlling interest and/or Eskom contractors, unless specifically

exempted by Sustainability Systems, where the business transacted may be of a completely

different nature to the core business of Eskom.

2.1.3 Effective date

This document will be effective from the date of authorisation.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

2.2 Normative/Informative References

Parties using this document shall apply the most recent edition of the documents listed in the

following paragraphs.

2.2.1 Normative

[1] ISO 9001 Quality Management Systems

[2] 32-37: Substance Abuse Procedure

[3] 32-95: Environmental, Occupational Health and Safety Incident Management Procedure

[4] 32-136 Contractor Health and Safety Requirements

[5] 32-345 Eskom Vehicle Safety Specification

[6] 32-407 Behavioural Safety Observations

[7] 32-418: Working at Heights Standard

[8] 32-477 Safety, Health and Environment Training and Development Procedure

[9] 32-520 Occupational Health and Safety Risk Assessment Procedure

[10] 32-524 Developing a SHE Specification

[11] 36-681: Plant Safety Regulations

[12] 32-726 SHE requirements for Eskom Commercial Process

[13] 32-727: Safety, Health, Environment and Quality Policy

[14] 32-848: Operating Regulations for High Voltage Systems

[15] 32-1112: Disciplinary Code

[16] 32-1113: Disciplinary Procedure

[17] 240-44175132 Eskom Personal Protective Equipment Specification

[18] 240-62946386: Vehicle and Driver Safety Management Procedure

[19] 240-43848327: Right to Refuse Employees’ Right of Refusal to Work in an Unsafe Situation

Procedure

[20] 240-84733329: Medical Surveillance Procedure

[21] 240-100979499 Personal Protective Equipment for Working at Heights Specification

2.2.2 Informative

[22] National Road Traffic Act

[23] Occupational Health and Safety Act

[24] 34-104 Earthing Standard

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

2.3 Definitions

2.3.1 Contractor: Any person (juristic/individual) formally contracted (directly or indirectly) by

Eskom and who performs work; supplies a service, product, equipment or material for the

purposes of advancing Eskom’s business and other interests. This includes consultants,

and third party contractors i.e. vendors, suppliers, agents, joint ventures, fixed term

contractors, principal contractors and subcontractors.

2.3.2 Life-saving Rule: Rules that, if not adhered to, have the potential to cause serious harm to

people. The consequences of a person knowingly and wilfully violating this rule will result in

a disciplinary process in accordance with the Eskom Disciplinary Code and Procedure.

2.3.3 Visitors: Any person who visits an Eskom site/office during working hours to attend a

meeting or for any reason whatsoever. This could include a minor.

2.3.4 Work at height: Means any work performed above a stable work surface or where a

person puts himself/herself in a position where he/she exposes himself/herself to a fall from

or into. Work at height is, as a result, work in any place (except a staircase in a permanent

workplace ), including a place at, above or below ground level, where a person could be

injured if he/she fell from that place. Access and egress that present a risk of fall can also

be classified as work at height.

2.3.5 Zero Tolerance: The standard that provides for the imposition of severe consequences for

a proscribed offence or behaviour without making exceptions for the extenuating

circumstances.

2.4 Abbreviations

Abbreviation Explanation

OHS Occupational Health and Safety

ORHVS Operational Regulations for High Voltage Systems

PPE Personal Protective Equipment

PSR Plant Safety Regulations

PTW Permit to Work

SHEQ Safety, health, environment and quality

2.5 Roles and Responsibilities

2.5.1 Sustainability Systems Department

The sustainability Systems Department shall:

a) Compile and review the Life-saving Rules for Occupational Health and Safety;

b) Develop awareness material;

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

c) Ensure that the rules are communicated throughout the business;

d) Ensure compliance is monitored; and

e) Ensure that violations and sanctions are consolidated and communicated by Sustainability

Systems to the organisation.

2.5.2 All Groups/Divisions/Operating Units/Business Units

The management at Group/Divisional/Operating Unit/Business Unit level shall be responsible for:

a) Implementing the Eskom Life-saving Rules in their Groups/Divisions/Operating

Units/Business Units.

b) Communicating to all their employees, contractors, contractor employees and visitors the

importance of compliance with the Eskom Life-saving Rules and the consequences of non-

compliance therewith. This includes communicating Life-saving Rules to all new

employees and new contractors.

c) Ensuring that the awareness material is made available, distributed and displayed at all

units.

d) Ensuring all employees sign confirmation that the rules have been discussed with them,

that they understand the rules and the consequences of violating these rules, and retain

copies thereof.

e) Investigating any violation of a Life-saving rule and initiate the disciplinary process within

five (5) working days.

f) Ensuring consistency in the application of appropriate sanctions on employees, contractors

and contractor employees.

2.5.3 All employees (Eskom and contractors)

a) Always observe and adhere to the Life-saving Rules.

b) Avoid taking shortcuts when executing tasks. Always do the right thing even when no-one

is watching.

c) Only perform work that you are authorised to do.

d) All employees to exercise the right to refuse to perform work in an unsafe situation, or when

required to ignore a Life-saving rule.

2.6 Process for Monitoring

Groups/Divisions/Operating Units/Business units are responsible for ensuring the understanding

of, and compliance with, Life-saving Rules. Line management shall monitor compliance and report

on analysis and trending through performance reporting. The amendments to the revised standard

shall be implemented with immediate effect and may be audited after a period of six (6) months

from date of implementation.

2.7 Related/Supporting Documents

[1] 240-62196227 - Life-saving Rules – revision 5 (superseded).

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

[2] 240–63942960 - Life-saving Rule Acknowledgement Form Document Content.

3. Document Content

Life-saving Rules are safety rules that, if not adhered to, have the potential to cause serious harm

to people. The consequences of a person knowingly and wilfully violating these rules will result in a

disciplinary process in accordance with the Eskom Disciplinary Code and Procedure.

The objective of this standard is to clarify Eskom’s intention to enforce “ZERO TOLERANCE” with

respect to behaviour resulting in serious risk to an individual at the workplace.

It must be noted that the content of this standard does not detract from the requirements for safe

behaviour for all other work-related activities or other safety requirements, but emphasises the

importance thereof.

3.1 Eskom Life-Saving Rules

3.1.1 Rule 1: open, isolate, test, earth, bond, and/or insulate before

Touch

With the aim to ensure a safe electrical work environment, no person may work/operate on, around

or near any electrical network, line or apparatus, electrically connected to the power system and/or

electrically charged and/or not electrically charged unless:

a) He/she is trained and authorised as competent for the task to be done;

b) There is a valid permit to work, where required;

c) A pre-task risk assessment to identify all risks and hazards has been conducted prior to any

work commencing;

d) He/she follows the requirements on OPEN, ISOLATE, TEST, EARTH, BOND and/or

INSULATE BEFORE TOUCH, correctly based on applicable/related standards, procedures

and outcome of risk assessment fit for the type of work or task to be performed;

e) The authorised person (team leader) has certified and physically shown all team members that

the apparatus is safe to work on;

f) He/she makes the specific electrical environment safe prior to performing the work; and

g) All the appropriate PPE (including face shield and insulated gloves for low voltage work) are

worn.

3.1.2 Rule 2: hook up at heights

Working at height is a significant part of work in Eskom Holdings and is regarded as a high-risk

activity, and as a result all precautions must be taken to prevent incidents while working at height.

Wherever reasonably practicable, preference must be given to the performance of work at ground

level as opposed to work in an elevated position. Where work in an elevated position is necessary,

the requirements in this document shall apply.

No person may work at height where there is a risk of falling unless:

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

a) He/she is medically fit to work at height;

b) A pre-task risk assessment to identify all risks and hazards has been conducted prior to

commencing any work of this nature;

c) He/she is appropriately trained as determined by the risk assessment;

d) He/she is appropriately secured during ascending and descending; and

e) He/she is using an Eskom approved fall arrest system where applicable.

3.1.3 Rule 3: buckle up

Where required, the proper wearing of seat belts for any driver, operator and passenger is

mandatory in all vehicles/equipment when driving and/or travelling for Eskom business purposes.

The driver is obligated to ensure that he/she as well as all passengers are properly seated and

wearing their seatbelts at all times while being transported in the vehicle, as per Eskom

specifications.

Note: This rule is applicable on any road or parking lot, irrespective of the speed, and when the

vehicle moves in a forward or backward direction.

3.1.4 Rule 4: be sober

No person who is under the influence or who appears to be under the influence of intoxicating

liquor or drugs will be permitted to enter, or remain on an Eskom site or conduct Eskom business

or drive/operate a vehicle/equipment for Eskom business purposes.

This includes any level of alcohol or the presence of any drugs, controlled substances, and/or

illegal substances in the body that impairs or could impair mental and physical functioning,

irrespective of when the substance was used.

3.1.5 Rule 5: ensure that you have a permit to work

Where an authorisation limitation exists, no person shall work without the required Permit to Work

(PTW), which is governed by for example the:

a) Plant Safety Regulations; or

b) Operating Regulations for High Voltage Systems (ORHVS); or

c) Any other activity where a permit is required.

No plant is to be returned to service without the cancellation of all permits on that plant in

accordance with procedure, unless permission is granted for a particular plant to be returned to

service with permits still open, like in the case of redundant systems.

NOTE: In the case of live work, a “live work declaration form” is to be completed by the authorised

person, who is the person responsible for the safe execution of work according to relevant

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

standards and procedures. Outline the key principles or rules to support the implementation of the

standard statement.

3.2 Consequences of violating a Life-Saving Rule

In terms of general health and safety in Eskom, if any of the Life-saving Rules are violated, it will

be treated as a serious misconduct, and result in a disciplinary process in accordance with the

Eskom Disciplinary Code and Procedure.

It must be highlighted that Eskom takes a ZERO TOLERANCE stance to violation of these rules.

Depending on the circumstances, Eskom reserves the right, where a contractor

manager/supervisor allows the violation of a Life-saving Rule, to suspend the contractor’s activities

while determining an appropriate sanction.

In the light of a contractor employee allegedly violating a Life-saving Rule, the contractor shall

immediately remove the employee from site and initiate the disciplinary process. The contractor

shall investigate any violation of a Life-saving Rule and initiate the disciplinary process within five

(5) working days of the violation. The contractor shall after the disciplinary process furnish Eskom

with a copy of the sanction.

4. Acceptance

This document has been seen and approved by:

Name Designation

Thava Govender Group Executive – Generation and (Acting) Risk and Sustainability

Divisions

Kerseri Pather General Manager – Sustainability Systems

Jace Naidoo Senior Manager – Sustainability Systems – OHS

Alex Stramrood Senior Manager – Sustainability Systems – OHS

Risk and Sustainability Members of the Risk and Sustainability Management Committee

Management Committee

HR Policies and Procedures Members of the HR Policies and Procedures Committee

Committee

5. Revisions

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

Date Rev. Compiler Remarks

January 2017 6 A Stramrood Substituted the words “Disciplinary

hearing” with Disciplinary process.

Updated the Purpose and

Applicability to specify that this

Standard is applicable to

contractors. Updated Normative

and Informative References.

Updated Definition section by

removing Agent and Consultant as

these have been incorporated into

the definition of Contractor.

Updated the definition of Work at

Height and Zero Tolerance.

Reviewed and updated the Roles

and Responsibilities section and

Process for Monitoring. Added

permit requirement to Rule 1,

updated Rule 2 - Removed the

words “psychologically fit to work”

as this is no longer a requirement

in terms of the Construction

Regulations, 2014 and updated

Rule 3 – Removed the words “(for

example transporting people on

the back of trucks in a cabin)”

Updated Consequences of

violating a Life-saving Rule with

regard to contractors.

October 2015 5 A Stramrood Revision date needed to be

extended. Content still valid and

same.

May 2012 4 S Govender Amended Section 3.6

Consequences of Violating a Life-

saving Rule to align with EXCO

decision.

March 2013 3 S Govender Changed Cardinal Rules to Life-

saving Rules, and amended

content to ensure better

understanding of the intent and

requirements.

September 2010 2 K Terblanche Content of Rev 1 was incorporated

into the new Policy template.

Content was revised and updated.

December 2008 1 K Terblanche Annexure 1: Acknowledgement of

Eskom Life-saving Rules of this

document was removed. The

references made to Annexure 1 in

paragraphs 3.5.2 and 3.8 were

also removed.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Life Saving-Rules Unique Identifier: 240-62196227

Revision: 6

Page:

Date Rev. Compiler Remarks

August 2008 0 K Terblanche The document with reference

number 32-421 was developed

and approved.

6. Development Team

The following people were involved in the development of this document:

 Alex Stramrood

 Kerseri Pather

 Loraine Smit

 Marc Lebea

 Mike Townsend

 Nosipho Noveve

 Sheryl Isaacs

 Sivi Govender

7. Acknowledgements

SN Middel

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

User profile:

• Displays company code and current settings.
• Allows password changes (requires current password).
• Logout button is available on the user profile screen.

Eskom eAuction platform: https://eauction.eskom.co.za. For BBBEE rating impact on awards, contact the procurement officer (details not provided in document).

Submission is via the Eskom eAuction platform at https://eauction.eskom.co.za. Key points:

• Register with a unique company code (emails to primary user only).
• Each user must have their own login (no shared accounts).
• Passwords: 8+ characters, mixed case, numbers, and special characters.
• Bids are financially binding; no changes after auction closure.
• Auction end times may extend if bids are placed near the deadline (e.g., +10 minutes).
• Logout after use to prevent unauthorized bids.
• Winning bidders are notified via email; procurement officer finalizes the contract.

Required documents/steps:

• Valid company code (emails contain a unique code, e.g., 8d20a9c0-1340-4e71-9d00-efc895ed5e72).
• All users from the same company must use the same code to link bids.
• Registration requires email, password (8+ chars, mixed case, numbers, special chars), and company code.

Evaluation is based on a point-based system considering:

• Price (bid amount).
• BBBEE rating (must be valid and maintained).
• Bids must follow auction rules: standard auctions (Eskom selling) require higher bids; reverse auctions (Eskom buying) require lower bids.
• Fixed bid increments apply to prevent minimal bid differences.
• Final award subject to Eskom review, including BBBEE compliance.

Scope: Online auction for the purchase, collection, and removal of a 5 MVA vandalized transformer (serial number T-2199 39-112) at Ga-Maja Substation.

• Auction types: Open (public), Standard (Eskom selling), or Reverse (Eskom buying).
• Auction duration: 1–10 days, with dynamic end-time extensions for late bids.
• Platform supports B2B, B2C, and C2C auctions.
• Bids start at Eskom reserve value and adjust based on demand.

Bid rules:

• Standard auctions: Each bid must be higher than the last.
• Reverse auctions: Each bid must be lower than the previous.

Pricing rules:

• Standard auctions: Bids must be higher than the last bid.
• Reverse auctions: Bids must be lower than the previous bid.
• Next bid is calculated as the current winning bid + fixed increment.
• Bids below the required increment are rejected.
• Financial commitment is binding upon bid submission.

Mandatory compliance:

• Registered business with a valid Eskom-issued company code.
• Valid BBBEE rating (impacts scoring and award).
• Primary user (from RFP response) must register first to receive the company code.
• No shared logins or unauthorized use of company codes.
• Inactive users must re-enter the company code to regain access.

B-BBEE requirements:

• Companies must maintain a valid BBBEE score rating.
• Auctions are awarded on a point-based system considering both price and BBBEE rating.
• For details on how BBBEE ratings impact the final award, consult the procurement officer.

Contractual terms:

• Bids are financially binding commitments to deliver at the offered price.
• Final award subject to Eskom review, including BBBEE compliance.
• Winning bidder is contacted by the procurement officer to finalize the contract.
• Refer to the End User Agreement for legal aspects of bidding.

Special conditions:

• Company security codes are unique and sent only to the primary user (from RFP response).
• Eskom is not liable for unauthorized use of shared codes.
• Shared logins are prohibited; each user must have their own credentials.
• Audit trails track all bids, users, and timestamps.
• Auction end times extend automatically if bids are placed near the deadline (e.g., +10 minutes).
• Bids are financially binding; no changes allowed after closure.

System requirements:

• Passwords: 8+ characters, mixed case, numbers, and special characters.
• Users must logout after sessions to prevent unauthorized bids.
• Inactive users are disabled and must re-enter the company code to restore access.

Eskom eAuction platform: https://eauction.eskom.co.za. For BBBEE-related queries, contact the procurement officer (no direct details provided).

• The clarification meeting/training date is to be specified by the bidder in the Acknowledgement Form.
• The form's review date is February 2027 (for internal document control).

• Submit a signed Acknowledgement Form (Annexure A.1) as a required returnable.
• The form must include: company/JV name, contact person name, landline, cellphone, email, supplier name, signature, designation, and date.
• The form confirms attendance at Reverse E-auction training or completion of self-training via the uploaded video.
• Ensure the form is completed accurately to avoid disqualification.

• Signed Acknowledgement Form (Annexure A.1) is mandatory.
• Must include: company/JV name, contact person name, landline, cellphone, email, supplier name, signature, designation, and date.

• Must have completed Reverse E-auction training (live or self-training) and acknowledge capability to operate the system.
• Must comply with Eskom's document control and copyright policies.
• Must demonstrate ability to operate the Reverse E-auction system if selected.

Required Returnable Documents:

• Signed Acknowledgement Form for Eskom OHS legal and other requirements.
• Company/Supplier Name.
• Name of Authorised Person (CEO/Director/Managing Director).
• Signature and Date.
• Witness 1 and Witness 2 signatures.

General:

• Must be a registered company (proof may be required).
• Must have experience in similar work (references/testimonials may be requested).

Technical:

• Capability to purchase, collect, and remove a 5 MVA vandalized transformer.
• Compliance with Eskom's OHS and statutory requirements.

Legal:

• Must agree to Eskom's terms, including OHS accountability for subcontractors/suppliers.
• Must sign the acknowledgement form (Annexure B).

Scope: Purchase, collect, and removal of a 5 MVA vandalized transformer (serial number T-2199 39-112) located at Ga-Maja Substation.

Mandatory OHS Compliance:

• Comply with Eskom Contractor Health and Safety Requirements Standard 32-136.
• Adhere to provided OHS specifications/requirements.
• Comply with the Occupational Health and Safety Act.
• Comply with the Compensation for Occupational Diseases and Illnesses Act.
• After contract award, align company processes with Eskom's OHS policies, procedures, and standards.
• Penalties apply for non-conformance by the main supplier, its contractors, or sub-suppliers.
• All employees (including contractors/suppliers) must undergo Eskom induction.

Contractor/Supplier Management:

• Demonstrate selection criteria and processes for appointing contractors/suppliers.
• Notify Eskom prior to appointing contractors/suppliers.
• Ensure contractors/suppliers have adequate resources and competencies.
• Accountable for ensuring contractors/suppliers comply with legal and Eskom requirements.
• Monitor contractors/suppliers via audits/assessments for OHS compliance.
• Provide grounds for termination of non-compliant contractors/suppliers.
• Address all non-conformances directly with the main contractor/supplier.
• Eskom may request testimonials/references and client contact details for verification.

Mandatory OHS Requirements:

• Comply with Eskom Contractor Health and Safety Requirements Standard 32-136.
• Adhere to provided OHS specifications/requirements.
• Comply with the Occupational Health and Safety Act.
• Comply with the Compensation for Occupational Diseases and Illnesses Act.
• Align company processes with Eskom's OHS policies, procedures, and standards after contract award.
• Penalties apply for non-conformance by the main supplier, its contractors, or sub-suppliers.
• All employees (including contractors/suppliers) must undergo Eskom induction.

Eskom is committed to safeguarding its contractors (principal contractors, appointed contractors,

suppliers, vendors, service providers and consultants) and the environment against undesired

exposure to its operations, which is in line with its Safety, Health, Environmental and Quality

Policy. Therefore, as an organisation, processes have to be in place to identify all possible

practical occupational health and safety risks to which contractors are exposed and to take the

appropriate measures that are necessary to prevent any incidents, injuries or environmental

damage resulting from accidental exposure.

The term “contractor requirements” means a comprehensive documented prerequisite of the

imperative safety, health and environmental requirements for a contract or project.

Contractors have the crucial responsibility for executing work safely on a site or project, including

taking measures to ensure contractor health, safety and environment during their activities/services

to prevent any injury to employees and/or other people and members of the public, or damage to

the environment. Each contractor is responsible for ensuring that its employees and the

employees of any appointed contractors comply with all the applicable occupational health and

safety legislative requirements and the policies and procedures of Eskom.

2. Supporting clauses

2.1 Scope

The aim of this standard is to standardise the health and safety requirements applicable to the

activities of contractors throughout Eskom Holdings SOC Limited and its subsidiaries, with a view

to achieving a common goal, namely Zero Harm.

This standard sets out the minimum legislative and organisational requirements for contractors.

Each project and situation may contain additional unique activities, challenges, needs and

requirements that must be considered and incorporated, over and above the minimum

requirements already contained in this standard.

This standard may not thoroughly address all the hazards and factors associated with any

specialised activity or operation. In such a situation, contractors shall be responsible for

developing their safety, health and environmental plans/procedures/manuals/work instructions to

adequately address these specialised activities and scope of operation.

2.1.1 Purpose

The purpose of this document is to stipulate essential information on significant safety and health

aspects for the purposes of contractor health and safety conformity and standardisation.

Eskom’s contractors have the fundamental accountability and responsibility for the on-site safety

and health of people, and environmental protection in their activities, services, products and work.

Each contractor is responsible for ensuring that its employees and the employees of all appointed

contractors comply with all the occupational safety, health, and environmental (SHE) statutory

requirements and the policies and procedures of Eskom Holdings SOC Limited.

The contractor’s SHE management system must demonstrate compliance with the level

appropriate to the service provided and with the applicable legal requirements. The contractor and

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

its employees must be able to carry out their work safely, using the correct procedures for the

safety of plant, equipment and substances, by employing safe systems of work, and providing

adequate instruction, training and supervision for all employees.

In addition to the legislative requirements governing health, safety and the environment,

contractors shall comply with all the Eskom Holdings SOC Limited policies, procedures and

standards.

NOTE: this standard (or any project-specific version of it) does not replace legislative requirements.

2.1.2 Applicability

This standard applies to Eskom Holdings SOC Limited, its divisions, subsidiaries, and entities in

which Eskom has a controlling interest.

This standard shall apply to all Eskom and Eskom subsidiary employees carrying out any form of

contract work for or on behalf of Eskom, that is, agents, clients and contractors.

NOTE: the client or agent is responsible for ensuring that the contractors are informed of any

revisions to any of the documents listed, which they are required to adhere to while performing

work for Eskom Holdings SOC Limited.

2.1.3 Effective date

This document will be effective from the date of signature. The implementation of this standard

shall be monitored after a period of six months from the authorisation date.

2.2 Normative/Informative references

Parties using this document shall apply the most recent edition of the documents listed in the

following paragraphs.

NOTE: where the date for revision of a document on the Eskom Document Centre website has

passed, the document still remains current, irrespective of having passed its revision date.

2.2.1 Normative

[1] ISO 9001 Quality Management Systems

[2] 32-296: Integrated SHE Organisation, Roles and Responsibilities, and Statutory Appointments

Procedure

[3] 32-727: Safety, Health, Environment, and Quality Policy

[4] 32-726: SHE Requirements for the Eskom Commercial Process

[5] 240-62196227: Life-Saving Rules Standard

[6] 32-245: Waste Management Procedure

[7] 32-477: Safety, Health, and Environment Training and Development

[8] 32-524 Developing Health & Safety Specifications

[9] 32-529: Occupational Health and Safety Risk Management Process

[10] 32-407: Behavioural Safety Observations

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

[11] 32-123: Emergency Planning

[12] 32-124: Eskom Fire Risk Management

[13] 32-108: Firefighting Organisation

[14] 32-37: Substance Abuse Procedure

[15] 32-95: Environmental, Occupational Health and Safety Incident Management Procedure

[16] 32-418: Working at Heights Standard

[17] 32-520: Occupational Health & Safety Risk Assessment Procedure

[18] 32-345: Eskom Vehicle Safety Specification

[19] 32-1112: Eskom Disciplinary Code (Standard)

[20] 32-1113: Eskom Disciplinary Procedure

[21] 32-1034: Eskom Procurement and Supply Chain Management Procedure

[22] 240-62946386: Vehicle and Driver Safety Management Procedure

[23] 240-44175038: Control of Non-Conforming Product or Service Procedure

[24] 240-46569633: Professional and Statutory Registration for Construction Project Managers and

Supervisors with SACPCMP

[25] Project and Construction Management Professions Act, 2000 (Act No. )

[26] National Environmental Management Act, 1998 (Act No. )

[27] National Environmental Management: Waste Act, 2008 (Act No. )

[28] All relevant South African legislation (at national, provincial and municipal level)

[29] Occupational Health and Safety Act, 1993 (Act No. ), and regulations.

2.2.2 Informative

NOTE: the following is a list of documents that can be used as a guide in order to meet legal and Eskom requirements.

[1] 240-84520108: Public Safety Standard

[2] 32-726: SHE Requirements for the Eskom Commercial Process

[3] 32-303: Requirements for the Safe Processing, Storage, Removing and Handling of Asbestoscontaining Materials, Equipment and Articles Procedure

[4] 240-46569633 Professional and Statutory Registration for Construction Project Managers and

Supervisors with SACPCMP

2.3 Definitions

NOTE: where there are no listed Eskom definitions, the definitions listed in the Occupational

Health and Safety Act, 1993 (Act No. ) (OHS Act), or its regulations should be referred

to.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

2.3.1 Agent: (OHS Act) means any person who acts as a representative for a client.

2.3.2 Baseline risk assessment: means the OHS hazards and risks that are identified and

assessed before the inception of a new project and the commencement of operations. The

baseline risk assessment shall include both routine and non-routine tasks.

2.3.3 Client: means the Eskom representative (Internal – Asset Owner), also referred to as the

contract administrator/custodian or agent or project manager (as defined in the contract).

He/she is the person responsible for ensuring that the works or services are executed in

terms of the contract, as well as for adherence to legislation pertaining to construction

works.

2.3.4 Competent person: means any person having the knowledge, training, experience and

qualifications specific to the work or task being performed, provided that, where appropriate,

qualifications and training are registered in terms of the South African Qualifications

Authority Act, 1995 (Act No. ).

2.3.5 Contractor: means a current or potential supplier, vendor, contractor, consultant or service

provider. A supplier may be a natural or legal person. Definition is per the 32-726 SHE

Requirements for the Eskom Commercial Process.

2.3.6 Contract custodian: means the person defined in a contract as the Eskom representative,

for example the project manager/end-user, that is, the person responsible for managing the

contract and ensuring that the works or services are executed in terms of the contract.

2.3.7 Construction work: means any work in connection with –

a) the construction, erection, alteration, renovation, repair, demolition or dismantling of or addition

to a building or any similar structure;

b) the construction, erection, maintenance, demolition or dismantling of any bridge, dam, canal,

road, railway, runway, sewer or water reticulation system, or any similar civil engineering structure;

or type of work.

2.3.8 Construction vehicle: means a vehicle used as a means of conveyance for transporting

persons or material or both such persons and material, as the case may be, both on and off

the construction site for the purpose of performing construction work.

2.3.9 Consultant: means a person providing professional advice.

2.3.10 Controlled disclosure: controlled disclosure to external parties (either enforced by law or

discretionary).

2.3.11 Design: in relation to any structure, includes drawings, calculations, design details and

specifications.

2.3.12 Designer: means –

a) a competent person who –

i. prepares a design;

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

ii. checks and approves a design;

iii arranges for a person at work under his or her control to prepare a design, including an

employee of that person where she or he is the employer; or

iv designs temporary work, including its components;

b) an architect or engineer contributing to, or having overall responsibility for a design;

c) a building services engineer designing details for fixed plant;

d) a surveyor specifying articles or drawing up specifications;

e) a contractor carrying out design work as part of a design and building project; or

f) an interior designer, shop-fitter or landscape architect.

2.3.13 Duty of care to the environment: anyone who causes or has caused or may cause

significant pollution or degradation of the environment must take reasonable measures to

prevent such pollution or degradation from occurring, continuing or recurring. If such harm

to the environment is authorised by law or cannot reasonably be avoided or stopped, such

person must minimise and rectify such pollution or degradation of the environment.

2.3.14 Employee: means, subject to the provisions of subsection (2), any person who is employed

by or works for an employer and who receives or is entitled to receive any remuneration or

who works under the direction or supervision of an employer or any other person.

2.3.15 Employer: means, subject to the provisions of subsection (2), any person who employs or

provides work for any person and remunerates that person or expressly or tacitly

undertakes to remunerate him/her, but excludes a TES (ex labour broker) as defined in

section 1(1) of the Labour Relations Act 1956 (Act No. ).

2.3.16 Environment: means –

a) the land, water, and atmosphere of the earth;

b) micro-organisms and plant and animal life; and

c) any part or combination of (a) and (b) and the interrelationships among and between them,

and the physical, chemical, aesthetic and cultural properties and conditions of the foregoing

that influence human health and well-being.

2.3.17 Eskom requirements: mean the Eskom requirements flowing from directives, policies,

standards, procedures, specifications, work instructions, guidelines or manuals.

2.3.18 Fall protection plan: means a documented plan of all the risks relating to working from an

elevated position, considering the nature of the work undertaken, and setting out the

procedures and methods to be applied in order to eliminate the risk.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

2.3.19 Hazard: means a source of, or exposure to, danger.

2.3.20 Hazard identification: means the identification and documenting of existing or expected

hazards to the health and safety of persons, which are normally associated with the type of

construction work being executed or to be executed.

2.3.21 Health and safety file: means a file or other record in permanent form, containing the

information required as contemplated in these regulations (the Construction Regulations).

2.3.22 Health and safety specification: means a document specification of all health and safety

requirements pertaining to associated works on a construction site, so as to ensure the

health and safety of persons.

2.3.23 Health and safety requirements: mean the comprehensive health and safety

requirements for a contract, project, site and scope of work. This specification is intended

to ensure the health and safety of persons, both workers and the public, and the duty of

care to the environment. The health and safety requirements must be specific to each

contract, project, site and scope of work.

2.3.24 Internal: means an Eskom department that performs work for another Eskom department.

2.3.25 Joint venture: means a strategic alliance between two or more parties to undertake

economic activity together. The parties agree to create a new entity (incorporated or

unincorporated) by each party’s contribution of equity, and they then share in the profits,

losses and control of the enterprise. The venture may be for one specific project only or a

continuing business relationship.

2.3.26 Life-Saving Rules: mean the set of Eskom safety rules that, if not adhered to, have the

potential to cause serious harm to people.

2.3.27 Maintenance: (maintenance management) means the schemes that can be based on a

number of techniques to focus on those parts which deteriorate and need to be maintained,

such as the following:

a) Preventive – planned maintenance which involves replacing parts and consumables or

making necessary adjustments at pre-set intervals, so that no hazards are created by

component deterioration or failure.

b) Condition-based –involves monitoring the condition of critical parts and carrying out

maintenance whenever necessary to prevent hazards which could otherwise occur.

c) Breakdown-based –the maintenance carried out when faults or failures have occurred. This

is acceptable if the failure does not present an immediate hazard and can be corrected

before the risk is increased.

2.3.28 Mandatary: includes an agent, a contractor, or an appointed contractor for work, but

without derogating from his/her status in his/her own right as an employer or user.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

2.3.29 Medical Certificate of Fitness: (OHS Act) means a certificate valid for one year, issued in

terms of the regulations by an occupational health practitioner who shall be registered with

the Health Professions Council of South Africa.

2.3.30 Medical surveillance: (OHS Act) means a planned programme of periodic examination

(which may include clinical examinations, biological monitoring or medical tests) of

employees by an occupational health practitioner or, in prescribed cases, by an

occupational medicine practitioner.

2.3.31 Method statement: (OHS Act) means a written document detailing the key activities to be

performed in order to reduce, as reasonably as practicable, the hazards identified in any

risk assessment.

2.3.32 Mine

a) when used as a noun, means –

i. any borehole or excavation, in any tailings on or in the earth, including the portion of the

earth that is under the sea or other water, made for the purpose of searching for or winning

a mineral, whether it is being worked or not; or

ii. any other place where a mineral deposit is being exploited, including the mining area and

all buildings, structures, machinery, mine dumps, access roads or objects situated on or in

that area that are used or intended to be used in connection with searching, winning,

exploiting or processing of a mineral, or for health and safety purposes. But, if two or more

excavations, boreholes or places are being worked in conjunction with one another, they

are deemed to comprise one mine, unless the Chief Inspector of Mines notifies their

employer in writing that those excavations, boreholes or places comprise two or more

mines; or

iii. a works; and

(b) when used as a verb, the making of any excavation or borehole referred to in paragraph (a)(i),

or the exploitation of any mineral deposit in any other manner, for the purpose of winning a

mineral, including prospecting in connection with the winning of a mineral.

2.3.33 Organisation: may be defined as a group of individuals (large of small) which is co-

operating under the direction of executive leadership in the accomplishment of certain

common objects.

2.3.34 Project: means an activity or a group of activities which has a defined start and end date, a

defined scope and a defined sum of money allocated to complete the activities.

2.3.35 Project manager/leader: means the person who has the responsibility for the successful

planning and execution of a project. The project manager must satisfy the certification

requirements set by the South African Council for the Project and Construction

Management Professions. Note: the project manager is the duly authorised Eskom

representative who acts on Eskom’s behalf as the administrating officer for the purposes of

the contract. (The term “project manager” in the context of this procedure should be used in

its broader sense and should not be restricted to the designation of project manager in any

specific work environment.)

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

2.3.36 Risk assessment: (OHS Act) means a programme to determine any risk associated with

any hazard at a construction site in order to identify the steps that have to be taken to

remove, reduce or control such hazard.

2.3.37 Service provider: means any private person or legal entity that provides any service(s) to

Eskom for compensation.

2.3.38 Subsidiary: means an enterprise controlled by another (called the parent) through the

ownership of greater than 50% of its voting stock.

2.3.39 Task: means a segment of work that requires a set of specific and distinct actions for its

completion.

2.3.40 Toolbox talks: where the team leader, after conducting pre-task planning, shares all the

tasks at hand and discusses task allocation, the identified risks and the control measures

with all his/her team members on site before commencing a specific task and documenting

the agreed strategy. (This shall be done to ensure a common understanding of the tasks,

risks and control measures required.)

2.3.41 The Act: (OHS Act) means the Occupational Health and Safety Act, 1993 (Act No. ), as amended, and the regulations made under it.

2.3.42 Visitor: means any person visiting a workplace with the knowledge of, or under the

supervision of, an employer or who is not providing a specific service to Eskom.

2.4 Abbreviations

Abbreviation Explanation

BU Business Unit

CE Chief Executive

COID Act Compensation for Occupational Injuries and Diseases Act, 1993 (Act No. )

HIRA Hazard Identification and Risk Assessment

MHS Act Mine Health and Safety Act, 1996 (Act No. )

NEMA National Environmental Management Act, 1998 (Act No. )

OHS Act Occupational Health and Safety Act, 1993 (Act No. )

OHS Occupational Health and Safety

H&S Health and Safety

ORHVS Operating Regulations for High Voltage Systems

SACPCMP South African Council for the Project and Construction Management Professions

SHE Safety, health, and environment

NRTA National Road Traffic Act, 1996 (Act No. )

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

2.5 Roles and responsibilities

The Group Chief Executive (GCE) of Eskom, as the employer in terms of the OHS Act and in

general terms, has the overall responsibility and liability for the health and safety of all persons

involved at all Eskom sites. Within the framework of the OHS Act, the GCE may discharge these

duties as far as is reasonably practicable. These duties may be delegated to section 16(2)

appointees and to responsible managers in the various Eskom divisions.

Eskom and its subsidiaries must take all reasonably practicable steps to prevent constructionrelated incidents and harm to any person, including members of the public, and damage to

property and the environment.

The contractor, being an employer in his/her own right, is still required to abide by Eskom’s SHE

requirements, as well as the relevant safety, health and environmental legislation.

The appointed managers are responsible for health, safety and the environment on sites under

their control.

2.5.1 Project management

Project management is the discipline of planning, organising, motivating and controlling resources

to achieve specific goals. A project is a temporary endeavour with a defined beginning and end

(usually time-constrained, and often constrained by funding or deliverables), undertaken to achieve

unique goals and objectives, typically to bring about beneficial change or added value. The

temporary nature of projects contrasts with business as usual (or operations), which are repetitive,

permanent or semi-permanent functional activities to produce products or services. In practice, the

management of these two systems is often quite different, and as such requires the development

of distinct technical skills and management strategies.

The primary challenge of project management is to achieve all of the project goals and objectives

while honouring the preconceived constraints. The primary constraints are scope, time, quality and

budget. The secondary and more ambitious challenge is to optimise the allocation of the necessary

inputs and integrate them to meet pre-defined objectives.

2.5.2 Project managers

Project managers manage the activities and resources allocated to projects in a cohesive, efficient

manner and also administer and execute engineering and technology projects (including control

plant) within cost, quality and time.

Eskom: Project health and safety manager/practitioner

The responsibility of the health and safety manager/practitioner is to provide assurance, as well as

to advise, assist and support the project manager, supervisor and project engineer with managing

the health and safety issues on the project, which include ensuring proper co-ordination among the

various contractors. The health and safety manager/practitioner shall also be responsible for

assisting with the development of site- and project-specific health and safety specifications and for

ensuring that health and safety specifications are issued with the enquiry documents and that the

contractor’s health and safety plans are submitted, evaluated and approved. He/she shall be

responsible for auditing these plans and ensuring they comply with legal requirements.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

2.5.3 Contractor health and safety officer

Where appointed, a contractor’s health and safety officer shall be competent to perform the

required duties contemplated in the OHS Act and contained in the project requirements.

2.5.4 MHS Act

In terms of the MHS Act, the appointment of a health and safety officer is required for the duration

of the contracted work. The contractor’s health and safety officer shall assist and support the

contractor’s construction manager to ensure that the organisation’s health and safety

responsibilities are fulfilled and that there is compliance with the health and safety specifications

and the health and safety plan.

In determining the number of appointed competent health and safety officers, the nature and scope

of work being performed shall be taken into consideration.

All contractor health and safety officers must liaise closely with Eskom’s OHS departments for the

Divisions/BUs in the area where they are working.

2.5.5 OHS Act

In terms of Construction Regulation 8(5) a contractor must, after consultation with the client and

having considered the size of the project, the degree of danger likely to be encountered or the

accumulation of hazards or risks on the site, appoint in writing a full-time construction health and

safety officer to assist with controlling the health and safety-related matters on the site: provided

that, where the question arises as to whether a construction health and safety officer is necessary,

the inspector makes thedecision.

The appointed safety officer must have the necessary competencies and resources to enable

him/her to carry out his/her tasks efficiently, and must be registered with a statutory body approved

by the Chief Inspector.

The contractor’s health and safety officer shall assist with the control of all safety-related matters at

the sites, and give inputs at the design stage.

In determining the number of appointed competent health and safety officers, the nature and scope

of the work being performed shall be taken into consideration.

All contractor health and safety officers must maintain constant liaison with Eskom’s divisional

health and safety departments and co-operate with the health and safety managers/practitioners

responsible for providing a health and safety service.

2.5.6 Contractors

Eskom, as the client, has duties to the contractor, and the contractor, in turn, has duties to all its

appointed contractors. It must be noted that the contractor remains accountable and responsible

for his/her appointed contractors.

The relationship between the contractor and its appointed contractors shall be governed by the

contractual arrangements entered into between them.

Contractors shall carry out the duties contemplated in sections 8 and 9, and the relevant

regulations and duties listed in regulation 7 of the Construction Regulations of the OHS Act.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

All Eskom contractors have to ensure their compliance with the legislative requirements and any

further requirements contained in the contractual agreements they enter into with Eskom.

Where subsidiaries of Eskom, such as Rotek Industries, serve in the capacity of an Eskom

contractor, they must comply with any further contractual requirements.

Construction supervisors shall be appointed in writing for the duration of the construction project,

with the primary responsibility of supervising the construction work. Where required, contractors

may appoint additional employees as assistant construction supervisors. Persons so appointed

must be competent and have extensive knowledge of the type of work they are required to

supervise.

Assistant construction supervisors have the same responsibilities as construction supervisors.

This appointment does not relieve the construction supervisors of any of their accountabilities

and/or responsibilities.

2.5.7 Employees

Section 14 of the OHS Act has reference; contractor employees are responsible for their own

health and safety, as well as the health and safety of their colleagues while at work. The

client/employer/contract manager cannot be expected to be totally responsible if any of their

employees do not comply with legislative and Eskom health and safety requirements. Employees

will be held jointly responsible where situations so require. In their own interests, contractor

employees must be aware of the responsibilities of their contractor management.

2.5.8 Construction professional registration

The legislation and the SACPCMP’s publications direct that all persons assuming responsibility for

construction project management, construction management and construction health and safety

should be registered as professionals in the appropriate category with the SACPCMP in order to

comply with the legal and statutory requirements in South Africa.

2.5.9 Joint ventures

Where the work is to be managed jointly with a joint venture partner, the requirements imposed on

the contractors shall also apply to the joint venture partner, therefore each contractor shall be

responsible and accountable for its own organisation’s health and safety. All organisations shall be

signatories to the required section 37(2) agreement of the OHS Act.

Where a joint venture operates as separate entities, each partner must fulfil the SHE requirements.

If the joint venture operates as a single entity which has been registered and through mutual

agreement, the single business entity must fulfil all the SHE requirements.

Each company shall be liable for its own contraventions and could, therefore, be prosecuted in its

own right without reference to any of the other companies involved.

2.6 Process for monitoring

This document will be reviewed five-yearly or if required.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

2.7 Related/Supporting documents

Not applicable.

2.8 Statutory/Non-Statutory appointment

All statutory appointments shall comply with legislative requirements and any Eskom non-statutory

appointments must be made using Eskom Standard 32-296: Integrated SHE Organisation, Roles

and Responsibilities, and Statutory Appointments.

Where BUs require contractors to make additional non-statutory appointments, these are permitted

(in terms of the BU’s Legal Appointments Manual, where compiled). All appointments/copies made

by the contractor shall be included in the health and safety file, and be available to the client/agent.

Where construction work is conducted on sites governed by mining legislation, the appropriate

equivalent appointments and assignments shall be made. Depending on the nature of the

contract, the assignations shall be expanded.

3. Document contents

3.1 Material and equipment

Material and equipment used or purchased must conform to the health and safety requirements of

the manufacturer and legislative requirements. Where reclaimed material is authorised to be used,

it shall meet the manufacturer’s safety requirements, as if it were new.

Cognisance of the health and safety factor during work: the health and safety of such

material/equipment shall be factored in, to ensure that it remains safe for use by others at a time

after the completion of the contract. Eskom and/or the designer/agent/client shall determine the

acceptability of workmanship.

3.2 Risk assessments

In terms of section 8(2)(d) of the OHS Act and section 9 of the CR for an employer, it is a legal

requirement to carry out risk assessments to establish what hazards to the health and safety of

persons are attached to any work which is performed, any article or substance which is produced,

processed, used, handled, stored or transported, and any plant or machinery which is used in

his/her business and he/she shall, as far as is reasonably practicable, further establish what

precautionary measures should be taken with respect to such work, article, substance, plant or

machinery in order to protect the health and safety of persons and shall provide the necessary

means to take such precautionary measures.

A risk assessment is defined as an identification of the hazards present in an organisation and an

estimate of the extent of the risks involved, taking into account whatever precautions are already

being taken.

Risk assessment is essentially a three-stage process to –

• identify all hazards;
• evaluate the risks; and
• take measures to control the risks.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

Risk assessments must be kept updated. This means that significant changes to a process or

activity, or any new process, activity or operation, should be subjected to a risk assessment and, if

new hazards come to light during the work process, these should also be subjected to risk

assessments.

Contractors/suppliers conducting high-risk and critical work/tasks/activities must have written safe

work procedures for the work/tasks/activities to be performed. This shall also apply to the

contractor’s contractor.

Risk assessments for long-term processes should be periodically reviewed and updated. Method

statements or written safe work procedures are an effective method for recording information and

keeping a record of the way that jobs or tasks must be performed.

Before work commences, risk assessments must be conducted for every job or task to allow

supervisors and employees to assess any inherent risks which might have been overlooked during

the initial risk assessment or any changes which might have occurred in a period of absence, in

particular if a job or task is extended over a day or halted owing to inclement weather.

3.3 Record keeping

Record keeping is a system where relevant documentation is kept for auditing or inspection

purposes and may be referenced to at any stage during or after a project.

All records pertaining to the project shall be kept in terms of legislative and Eskom requirements.

The SHE files shall be kept for the duration of the project. They shall be open to audit or inspection

by any party who is entitled to audit or inspect the project. SHE files should be handed over by the

contractor to the client or asset owners for archiving on completion of the project.

3.4 Disciplinary process

A disciplinary process is a structured organisational procedure to deal with employees who have

transgressed the organisation’s rules or requirements. This is a method of changing behaviour. It is

essential for an organisation to have such a process.

3.5 Life-Saving Rules

Life-Saving Rules are a set of Eskom safety rules which, if not adhered to, have the potential to

cause serious harm to people.

• These rules are generally formulated in terms of the consequences of the behaviours they

describe, i.e. if a particular set of behaviours or actions have a very high probability of

causing disabilities or fatalities when performed.

• Rule 1: Open, Isolate, Test, Earth, Bond and/or Insulate before Touch
• Rule 2: Hook up at Heights
• Rule 3: Buckle Up
• Rule 4: Be Sober
• Rule 5: Ensure that you have a Permit to Work

These rules are created to enforce “zero tolerance” of serious at-risk behaviours.

Violation of these rules will be viewed in a serious light and the consequences will be dealt with in

accordance with the respective disciplinary processes.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

The Life-Saving Rules apply to all Eskom employees, agents and contractors. Visitors to Eskom

should also respect and adhere to these rules as applicable and could be instructed to leave the

Eskom premises with immediate effect should they refuse to do so.

3.6 Health and safety behaviour observations

The objective of behaviour safety observations is to assess and address the actual safe and

unsafe behaviour of people in the workplace, as well as the workplace conditions that are caused

by the actions or omissions of employees and contractors.

3.7 Incident investigation

All incidents shall be investigated in terms of OHS Act General Administrative Regulations 8 and 9,

using Eskom Procedure 32-95 as a reference, and where injuries as contemplated in sections 24

and 25 have been sustained, be reported to the Department of Labour.

Contractors shall use the standard General Administrative Regulation Annexure 1 “Recording of an

Incident” form as a minimum for all incident investigation reports.

The objective of incident investigation, not only being a legal requirement, is to establish why and

how the incident occurred; and to find out the real causes of the incident and to decide on the

precautionary measures that are required to address the causes to prevent any recurrences of the

same or similar incidents.

3.8 Training

Appropriate training must be given to employees so that they are competent to perform the tasks

assigned to and expected of them. Training also gives an employee an opportunity to develop

additional skills which will benefit any organisation.

The contractor shall have a training matrix for its organisation.

3.8.1 Induction training

All contractors, their employees and visitors are required to attend formal induction training

courses. Such training shall be conducted by contractor management, construction safety officers

or construction supervisors.

Induction training is an opportunity to inform persons of the organisation’s health and safety

requirements, not only in the organisation’s offices but also at the workplaces.

3.8.2 Site-specific awareness training

Over and above induction training, contractors are required to ensure, before an employee

commences work on the project, that the supervisor in control with responsibility for the employee

has informed the employee of his/her scope of authority for that site/workplace.

3.9 Health and safety representative

The requirements of sections 17 and 18 of the OHS Act shall be complied with. Where contractors

perform operational work, they shall appoint health and safety representatives for each workplace.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

Contractor managers shall permit their appointed health and safety representatives to carry out

their functions as required by legislation and support them in performing these functions.

The client may require a contractor safety representative to be appointed and trained on the basis

of the nature and risk level of work in terms of sections 17 and 18 of the OHS Act.

3.10 Health and safety communication

Communication is a two-way tool to enhance awareness and knowledge with the main aim of

changing behaviour or influencing decision-making. Communication is a process which allows

information to be shared and exchanged, using different methods that sometimes require

feedback.

3.10.1 SHE Committees

Statutory SHE Committees shall be established in terms of sections 19 and 20 and General

Administrative Regulation 5 of the OHS Act and Eskom’s requirements.

SHE Committees are forums for discussing health and safety-related matters, with specifics such

as making recommendations to an employer on health and safety matters, incident investigations

and any other health and safety-related matters as such committees may prescribe.

Project managers shall include safety and health as a standing agenda item for all their project

meetings, and the minutes of these meetings must be available on site at all times.

NOTE: this project meeting does not replace or act as a substitute for the required SHE Committee

meeting.

3.10.2 Toolbox talks

Toolbox talks are short, targeted meetings and/or awareness sessions to inform and/or educate

employees about the hazards and risks they will be exposed to when they perform work. Use

toolbox talks to create awareness among the employees to recognise and avoid unsafe conditions.

Use toolbox talks to teach employees to correct or report health and safety hazards so that

management and other employees can take actions to correct them. Employees will learn to avoid

the potentially hazardous situations discussed during toolbox talks as well as become able to

identify hazards and correct those hazards prior to starting a task/job if there are hazards present.

Toolbox talks are an effective way of fulfilling one’s legal requirements.

3.10.3 General SHE communication

Constant communication with employees creates an interest and feeling of being part of the team.

Various methods could be in the form of, but not limited to –

• posters,
• videos,
• competitions, and
• newsletters.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

Such methods are learning aids and also send a message or act as a reminder of a SHE topic

without having to hold specific forums or training sessions.

3.11 Contractor’s site facilities

Where required, contractors, unless otherwise specified in the contract or negotiated with Eskom to

use their facilities, must ensure that adequate facilities are provided for their employees on the

site/project.

When such facilities are provided, they must comply with the Facilities Regulations, SANS 10400

standard A to XA and CR 30.

3.12 Public safety

Eskom upholds the rights of members of the public and has an awareness and educational

programme to protect the public against the risks that may arise out of, and in the course of,

Eskom’s activities. Similarly, contractors shall demonstrate the same respect for the public.

Contractors shall include in their SHE plan how they intend controlling or safeguarding any

members of the public against their activities during the project, without damaging Eskom’s name

and reputation.

3.13 Emergency preparedness

Emergency situations threaten, or may cause harm to, the lives of employees and members of the

public, may cause damage to property, infrastructure and equipment as well as degradation to the

environment, and may disrupt production and the rendering of services.

The contractor shall have an emergency preparedness plan that will address all the identified risks

of the organisation so as to achieve a quick response and recovery and return the situation to

normal in the shortest possible time and the most cost-effective way.

3.13.1 Fire safety

Fire safety is an integral part of the general safety and protection of an organisation, its employees

and members of the public from the effects of fire, heat and smoke. As a minimum, this is ensured

by complying with and fulfilling the legislative and policy requirements.

Fire safety requirements are covered in the Construction Regulations and the National Building

Regulations, SANS 10400 (T regulations).

3.13.2 First-aid planning and emergency care

Every person at a workplace should be given appropriate and prompt medical treatment or

assistance.

In the event of an incident and to receive post-incident rehabilitation, organisations are required to

meet the first-aid requirements of General Safety Regulation 3:

“An employer shall take all reasonable steps that are necessary under the circumstances, to

ensure that persons at work receive prompt first aid treatment in the case of injury or emergency.”

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

Eskom has established a contract with Netcare 911 for all its employees, contractors and their

employees for emergency medical assistance while on duty anywhere in South Africa. The

telephone number is 086 1237 566 (0861 2ESKOM).

3.13.3 Emergency escape routes

The SANS 10400 T regulations provide that escape routes have to be incorporated in buildings.

Far too often, when there are fires inside a building, employees die or are injured because they

were unable to evacuate the burning building. This is attributed to there being no escape routes

and/or, if there were such routes in the building, egress was restricted because the routes were

being used as storage areas.

3.14 Occupational health and hygiene

3.14.1 Medicals

Medical surveillance is based on the occupational risk exposure of employees. It is a statutory

requirement in terms of the Occupational Health and Safety Act, 1993 (Act No. ) and is

an essential component of an Occupational Health and Safety programme.

The purpose of medical surveillance is to comply with statutory requirements to determine a

person’s fitness for duty by assessing whether or not the prospective candidate or employee is

physically/mentally/psychologically fit and able to fulfil the inherent requirements of the prospective

or current job without any ill effects or limitations, and to provide a baseline health status against

which future changes can be measured. Job specifications are required for each individual person

so that job-specific fitness can be measured.

The contractor shall have a medical surveillance programme.

3.14.2 Occupational hygiene

Occupational hygiene is the identification, evaluation and control of those environmental factors,

arising in or from the workplace, that may cause illness, injury or discomfort to the employees or

the surrounding communities.

Occupational hygiene stressors include chemical, physical, biological and ergonomic stressors.

Where there is a possibility of occupational hygiene stressors (for example noise, dust,

illumination, heat and cold stressors, ergonomics, vibration (hand, arm and whole body, etc.),

health risk assessments must be carried out to determine whether there is any possible worker

exposure. Records of all these assessments should be documented and kept up to date.

Contractors shall monitor the extent to which their employees are exposed to the occupational

hygiene stressors. These assessments should be performed by a SANAS-accredited and DOLapproved inspection authority.

3.14.3 Protection against thermal conditions

The requirements listed in the OHS Act Environmental Regulations for Workplaces, Regulation 2,

are precise. The human body will only survive if its core temperature does not exceed the

medically accepted limits of the WBGT Index of 30 for heat, and dry bulb (DB) temperature of not

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

less than 6 oC for cold. Any exposure beyond these limits can lead to organ damage/failure and

death.

3.14.4 Asbestos control management

The exposure of employees to asbestos-containing materials is a serious health risk. The

management and disposal of asbestos-containing materials also pose significant environmental

impacts and consequent legal and financial risks. Where the handling of asbestos and/or asbestosrelated products is required, this shall only be carried out in terms of the Asbestos Regulations of

the OHS Act.

3.14.5 Noise

Noise and vibration are both fluctuations in the pressure of air (or other media) which affect the

human body. Vibrations that are detected by the human ear are classified as sound. Noise is an

unwanted sound.

Where the value of the 8-hour rating level is 85 dBA, above which hearing impairment is likely to

result, the contractor shall have an effective hearing conservation programme.

3.15 Auditing

To maintain an organisation’s efficiency and statutory observance, regular audits must be

conducted throughout the organisation.

Internal auditing is an independent, objective assurance and consulting activity designed to add

value and improve an organisation's operations. It helps an organisation accomplish its objectives

by bringing a systematic, disciplined approach to evaluating and improving the effectiveness of risk

management, control and governance processes.

3.16 Inspections

Regular inspections on health and safety matters highlight problem areas and enable action to be

taken before an incident occurs. Safety inspections can be either reactive or proactive.

Reactive inspections are those that occur after the fact, i.e. the incident has already occurred, or is

a response to reports which highlight that something is not according to plan.

The proactive approach endeavours to identify, evaluate and control hazards and risks before they

develop to the stage of causing an incident.

Safety inspections are the common method employed to identify potential hazards before they

manifest, where the work area is inspected for any hazards and these are recorded, and after the

inspection the hazards are assessed and a plan of action is formulated to rectify such hazards.

A surprise inspection tends to have different results from those of an announced inspection.

Leaders wanting to know how others in their organisation perform can drop in without warning, to

see directly what happens. If an inspection is announced in advance, it can give people a chance

to cover up or to fix mistakes. This could lead to distorted and inaccurate findings. This is why a

surprise inspection gives inspectors a better picture of the typical state of the inspected object or

process than an announced inspection.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

3.17 Transport/Mobile plant equipment

The use of vehicles accounts for a large number of injuries and fatalities due to motor vehicle

accidents in South Africa. Construction sites account for a number of construction-related

accidents involving construction vehicles and mobile equipment.

The National Road Traffic Act regulates vehicle usage, the roadworthiness of vehicles and the

competency of vehicle drivers.

There is a misconception about carrying passengers in the back of vehicles. The Act does not

permit passengers to be transported in the back of light delivery vehicles. Carrying passengers at

the back of trucks is only permitted if such a truck is fitted by the manufacturer or manufacturer’s

appointed fitment centre with a specifically designed crew cab and appropriate seating and seat

belts for each passenger.

Eskom does not approve the conveying of passengers in the back of vehicles designed to carry

equipment/loads (any truck/trailer), irrespective of whether or not crew cabs are fitted and seating

with four-point seat belts has been fitted.

Construction vehicles and mobile equipment, when driven or towed on a public road, fall under the

requirements of the Act.

All construction vehicles and equipment shall meet the legislative requirements pertaining to the

OHS Act Construction Regulation 23, NRTA, the Mine Health and Safety Act and the National

Environmental Act.

3.18 Management of hazardous materials/chemicals

The handling and use of hazardous materials have a major impact on the health and wellbeing of

all persons and the environment. Various requirements for the handling and storage of hazardous

materials and chemicals are listed in the OHS Act.

When purchasing hazardous materials and/or chemicals, buying departments can fulfil the

legislative requirements by ensuring that purchases are made only from suppliers and

manufacturers that comply with the requirements of section 10 (General duties of manufacturers

and others regarding articles and substances for use at work) and section 22 (Sale of certain

articles prohibited) of the OHS Act.

Any hazardous materials and chemicals, including gases, must be stored in compliance with the

legislative requirements, local municipal by-laws and SANS building standards.

3.19 Machinery, tools and equipment

Machinery is considered as any article or a combination of articles assembled, arranged or

connected and which is used or intended to be used for converting any form of energy to perform

work, or which is used, or intended to be used, whether incidental thereto or not, for developing,

receiving, storing, containing, conforming, transmitting, transferring or controlling any form of

energy.

The requirements for the use of machinery are covered in the various regulations of the

Occupational Health and Safety Act.

There are strict requirements regarding the supervision and use of machinery. Since incorrectly

used machinery or using unsafe machinery can cause serious harm and/or damage, it is important

to ensure that all mechanical equipment is safeguarded in order to protect the health and safety of

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

persons who may be exposed to such mechanical equipment, and also to ensure that competent

persons operate the machinery.

3.20 Explosive-powered tools

An explosive-powered tool means a tool that is activated by an explosive cartridge and/or air or

gas charge, and that is used for driving bolts, nails and similar objects for the purpose of providing

fixing.

Because such a tool fastening system operates on an explosive force, it is considered a lethal

operating tool, especially when the manufacturer’s and legal requirements are not adhered to, in

particular when being operated. These types of tools operate like a loaded gun, so they must be

treated with extreme caution and be operated by specially trained employees.

The legal operating requirements for explosive-powered tools are set out in the Construction

Regulations.

3.21 Lifting equipment

Owing to its versatility, lifting equipment is often abused and/or misused. This nearly always results

in damage to and/or the failure of equipment, leading to incidents and serious injuries.

All types of lifting equipment are governed by regulation 18 of the OHS Act: Driven Machinery

Regulations, as follows:

• Construction Regulations –material hoists and tower cranes.
• Driven Machinery Regulations – goods hoists, lifting machines and lifting tackle (which

includes all the lifting machine codes as listed in the regulations and the national code of

practice for the training providers of lifting machine operators).

When working in close proximity (with tower cranes) to power lines, the contractor shall apply for a

permit. See the Eskom Plant Safety Regulations and/or Operating Regulations for High-Voltage

Systems and Electrical Machinery Regulations 19(4) and 19(5) of the OHS Act.

3.22 Boilers, pressurised systems and vessels under pressure

The Pressure Equipment Regulations cover various types of equipment, from boilers, fixed-plant

compressors, mobile compressors and pressure vessels, to fire extinguishers and all piping

associated with such equipment.

There are strict requirements in terms of the Pressure Equipment Regulations. A poorly maintained

and/or operated piece of equipment can have catastrophic consequences.

3.23 Working at heights

Where there is a risk that a fall may cause personal injury, measures should be taken to prevent a

fall and injury. Falls occur at any level. The duty is to prevent falls. It is worth noting that there are

almost as many low-fall injuries as high-fall injuries. Where it is reasonably practicable to take

precautions to prevent falls, such precautions should be taken.

In an effort to prevent falls, including falling objects and/or materials, fall protection plans and

rescue plans must be compiled and implemented. The Occupational Health and Safety Act places

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

duties on employers, employees and anyone who controls the way that work at height is

undertaken.

Where possible, efforts should be made to provide a safe working platform for employees before

resorting to the use of a fall arrest system. Where this is not practicable, suitable fall arrest

equipment shall be provided.

All equipment used for working at height must conform to the OHS Act and the relevant SANS

standards.

A working platform can be virtually any surface from which work is carried out, such as a roof, floor,

a platform on a scaffold, a mobile elevated work platform, the treads of a stepladder, climbing

irons, suspended platforms or a boatswain’s chair.

3.23.1 Eskom’s life-saving rule “Hook up at Height”

When working at height, you must take suitable and sufficient measures to prevent, as far as is

reasonably practicable, any person from falling a distance liable to cause personal injury. Where a

fall from any height could result in harm, an effective means of fall prevention has to be put in

place. You are required to take practicable steps to ensure your safety and the safety of others, as

well as not knowingly exposing yourself or others to harm.

3.23.2 Floor and wall openings

Falls through openings in walls, floors, roadways, etc. account for a number of fatalities and

serious injuries where such openings are not protected. Floor and wall openings must be included

in the fall protection plan.

When including fall arrest equipment, note must be taken of the amount of pedestrian and

vehicular traffic and that the nature of equipment specified can prevent its dislodgement or

unauthorised removal, in other words, barricading must be adequate.

3.24 Excavations and tunnelling

3.24.1 Excavations

Almost all construction work involves some form of excavation, for foundations, drains, sewers, etc.

These can vary greatly in depth and may be only a few centimetres deep or very deep and very

dangerous.

A relatively small collapse might involve about a cubic metre of soil, but a cubic metre of soil

weighs over a tonne. A person at the bottom of a trench who is buried under this volume of

material would be unable to breathe, due to the pressure on the chest, and could quickly suffocate

and die.

An excavation may also be a “confined space” in the meaning of the Work in Confined Spaces

Regulations, and additional precautions will have to be taken.

The legislative requirements for making excavations are contained in Construction Regulation 13

of the OHS Act.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

3.24.2 Tunnelling

Owing to environmental and seismic factors, no ground material can be regarded as stable when

excavating or tunnelling is taking place or work is being done in them. Ground collapse is

extremely hazardous, especially where people are working inside a tunnel, and usually results in

serious injuries and fatalities.

Any contractor performing tunnelling activities shall comply with Construction Regulation 15, which

then refers to the Tunnelling Regulations published under the Mine Health and Safety Act, 1996

(Act No. ), as amended, and regulation 15 of the Construction Regulations.

3.25 Confined spaces

The belief that any confined space is a safe place as far as asphyxiation is concerned, because of

ignorance about the air quality inside such space and the risk factors, is dangerous. Most

asphyxiates are colourless and odourless. Sometimes the odour asphyxiate is considered a

nuisance and temporary. This makes entering into a confined space an extremely high risk. If

testing is not performed, irrespective of the size of the space or the duration of entry, then

employees’ health (in the short or long term) will be at risk.

The requirements listed in General Safety Regulation 5 shall be adhered to.

3.26 Danger of engulfment

No person shall be permitted to work in any situation where there is a danger of material, etc.

being discharged, unless that person is issued with an appropriate safety belt/harness fitted with a

rope, where at least one other person who has been trained in rescue is available and observing.

If there is a possibility of gas or other fumes being emitted from the material in question, adequate

precautions shall be taken regarding air quality.

3.27 Barricading

Falls through openings in walls, floors or excavations, or approaching dangerous equipment and

operations, continue to pose a threat to persons.

Stringent precautions have to be taken to protect persons against any form of injury through

entering unauthorised entrances and/or areas and/or to prevent such persons from approaching

dangerous and/or operating equipment. These precautions are taken by erecting substantial

barriers, fencing or covers to a degree that prevents unauthorised removal.

3.28 Explosives

The handling and use of explosives for any form of construction work are controlled by the

requirements of the Explosives Regulations of the OHS Act, the Mine, Health and Safety Act, 1996

(Act No. ) and the Explosives Act, 1956 (Act No. ).

Requirements for the transporting and storage of explosives must be in accordance with

Explosives Regulation 13(4) of the OHS Act and SANS 100228 Code of Practice for the

Identification and Classification of Dangerous Substances and Goods for Transport (published by

the South African Bureau of Standards).

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

Explosives in the wrong hands and used for the wrong purpose can have devastating

consequences.

3.29 Demolition work

The demolition of structures is an extremely hazardous task and can only be performed by

competent persons.

All demolition work must be planned, and all role players must be involved in the planning; this

includes making thorough risk assessments.

If explosives have to be used, the requirements in terms of the Explosives Regulations shall be

adhered to.

Where structures (power lines, poles, lattice towers, etc.) have to be demolished, this shall be done

in terms of Eskom requirements (task manuals).

All demolition work shall be carried out in accordance with Construction Regulation 14 Demolition

Work.

3.30 Permit to work

A permit-to-work system is a formal written system used to control certain types of work which are

potentially hazardous.

A permit-to-work is a document which specifies the work to be done and the precautions to be

taken.

Permits-to-work are an essential part of safe systems of work for many maintenance activities.

They allow work to start only after safe procedures have been defined, and provide a clear record

that all foreseeable hazards have been considered.

A permit is needed when maintenance work can only be carried out if normal safeguards are

dropped or when the work introduces new hazards. Examples are entry into vessels, hot work and

pipeline breaking.

If the type of work requires working with Eskom power systems/networks (low voltage, medium

voltage or high voltage), then the appropriate permits will be required.

3.31 Radiography, ultrasonic or non-destructive testing (NDT)

During the construction phase and maintenance phase, certain equipment and/or materials require

some form of examination to ascertain that the material used is free of any kind of defect or that

welded joints in piping do not leak. Where testing is performed, all actions for that specific type of

testing must be taken in accordance with the relevant requirements.

3.32 Work in close proximity to/on public roads

Working next to or in close proximity to any public road has inherent dangers, not only to the

persons carrying out the work but also to the motorists, where the persons working do not take

care of their own safety and ignore any rules and regulations. It is imperative to comply with all the

requirements of the National Road Traffic Act when work is performed. For additional worker

safety, organisations should enhance the national requirements.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

3.33 Work stoppage

Section 8(2)(f) and Construction Regulation 5(q) of the OHS Act have clear requirements for not

permitting an employee to work unless adequate precautionary measures are taken and for

stopping any work which is not in accordance with health and safety plans.

Any person may stop any activity where there is an unsafe act or unsafe condition that poses or

may pose an imminent threat to the health and safety of an individual or of creating a risk of

degrading the environment. This includes any unauthorised work or service performed by, or

legally or contractually non-compliant acts or omissions by, any contractor contracted to work at

that site.

Work stoppages which are initiated because of SHE concerns will be handled in terms of the

Eskom standard SHE Requirements for the Eskom Commercial Process (32-726).

Where stoppages are carried out, the required non-conformance report shall be raised.

3.34 Substance abuse

Alcohol and substance abuse poses a significant threat to any business, more so in industrial

incidents and when driving vehicles. Eskom is therefore entitled to take reasonable steps to ensure

that intoxicated persons are identified and prevented from entering Eskom’s premises, or working

on any of Eskom’s equipment.

General Safety Regulation 2A is clear on the legal stance regarding intoxication.

Persons are not permitted to enter or remain on or at a workplace while under the influence of

either or both substances and are not permitted to be under the influence of or consume

intoxicating substances while at/in the workplace. There is a provision regarding the taking of

medication.

The permissible blood level of alcohol and/or drugs is 0%.

3.35 Statistical reporting

There is a legal requirement in terms of the Occupational Health and Safety Act, 1993 (Act No. ) (General Administrative Regulations) that certain serious incidents shall be reported to the

Department of Labour within a specified time.

Measuring performance also allows us to entrench a positive safety culture and benchmark against

world-class systems.

The primary purpose of measuring health and safety performance is to provide information about

the progress and current status of the strategies, processes and activities used by Eskom to

control risks to health and safety.

Suppliers are required to report to the Eskom contract custodians and Eskom SHE staff, the

monthly OHS statistics which shall include the following as a minimum:

• The name of the principal contractor company, the name of each contractor company
• Incidents: lost time, medical, first aid and near–misses must be reported
• Manpower numbers per supplier and contractor company
• Actual man-hours worked

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

• Status of incidents investigated and recommendations closed out
• Status of audits conducted and findings closed out

Measurement information sustains the operation and development of the health and safety

management system, and the control of risk, by –

• providing information on how the system operates in practice;
• identifying areas where remedial action is required; and
• providing a basis for continual improvement.

This report will also enable the organisation to reflect on the impact of the implemented

improvement strategies, namely a decrease or an increase in the number of incidents.

3.35.1 From a contractor point of view

There are regulatory requirements in the Construction Regulations which place a strong emphasis

on the relationship between and accountability from the client’s and contractor’s point of view. The

contractor, which is an employer in its own right, does not release Eskom from fundamental

responsibilities; therefore Eskom will have an interest in the contractor’s activities.

“We can't manage what we can't measure.”

“What is measured can be monitored and improved.”

3.36 Housekeeping

Good housekeeping has important functions, which benefit not only the worker but also the

employer:

• It saves time which could be taken up by searching for equipment, tools and articles.
• Injuries are prevented because passages, walk areas and workplaces are free from

superfluous material.

• Space is saved if equipment and articles are neatly packed and correctly stored.
• The risk of fire is diminished when provision is made for the correct placing of the right type

of refuse bins, store areas comply with good storage practices and stacking is done in

accordance with accepted stacking practices.

Access to emergency and/or safety equipment will be unimpeded.

Housekeeping means “A Place for Everything and Everything in Its Place”.

A clean and tidy workplace produces a clean and safe worker.

Prompt disposal of waste materials, scrap and rubbish is essential to prevent unnecessary storage.

3.37 Workplace signage and colour coding

The purpose of symbolic safety signs is to convey a message without the use of a specific

language. In this way, instant recognition takes place or the employee can receive a message,

order or warning.

Caution and care have to be taken when positioning mandatory signage. Where these signs

“indicate” a requirement, this means that it shall be done, irrespective of whether the activity is

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

present or the equipment is a requirement. For example, if the sign indicates that hearing

protection is required, which is now no longer needed although the sign is still in place, hearing

protection shall be worn.

All signs and notices shall conform to the requirements of SANS 1186 in terms of standard signs,

safety colours, geometric forms and dimensions.

In terms of identification regarding colour marking, ensure that the colours used match the

appropriate colours of SANS 10140 and 1091.

3.38 Personal protective equipment (PPE)

Personal protective equipment may be described as clothing and/or equipment used in the

workplace to protect the worker from risks and hazards, and includes but is not limited to

equipment and clothing worn on the body as well as equipment used to determine, measure or

indicate danger. The objective of protective clothing is to prevent exposure or injury to any body

parts exposed to operations.

In the interests of the effective protection of the worker, it is essential for the quality and

effectiveness of the items to be of a high standard.

It is imperative to realise that PPE, like any other form of protection, does not eliminate danger. It

simply serves as a screen between the person and the danger lurking in the machine or process.

In most instances, the PPE can only limit to a greater or lesser extent the negative effect of danger

to the human body. Employees must be trained on the limitations of PPE and on how to fit PEE

correctly.

General Safety Regulation 2 of the OHS Act provides for employers to make the workplace safe

and where required to provide appropriate PPE.

3.39 Safety, Health and Environment (SHE) Specification

NOTE: this paragraph is included for information sharing only. The guideline for the compilation of

SHE specifications is contained in the Eskom document 32-524 “Developing a Construction Safety,

Health, and Environmental Specification”.

As a norm, Eskom provides SHE project/service specifications for all types of contracts awarded.

Minimum requirements for SHE specifications must be specific to the task, project and site. The

various project tasks have to be defined, the associated hazards identified, and the associated

risks listed.

SHE specifications provide a basis of requirements for contractors to compile their project-specific

SHE plans.

By drawing up SHE specifications, the client has endeavoured to address the identified critical

factors relating to health and safety issues in order to assist the contractor to provide adequately

for the health and safety of employees on site. Should additional risks be identified later by Eskom

or its agents/clients, these will be included in the contract works information and/or relayed at the

clarification or negotiation meeting.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

Contractor Health and Safety Requirements Unique Identifier: 32-136

Revision: 4

Page:

3.40 Safety, Health and Environment (SHE) Plan

A health and safety plan is a documented plan that addresses the hazards identified, and includes

safe work procedures to mitigate, reduce or control the hazards identified. It is specific to each

project undertaken and site where work is done, is compiled by the contractor and appointed

contractor, and must be approved by the client/agent prior to the commencement of any activities

on a project. The contractor and the client/agent must both be signatories to the health and safety

plan once it has been negotiated, agreed upon and accepted. This plan has to be regularly

updated to take account of any changes in project scope and unanticipated conditions.

The health and safety plan must cover all aspects of the health and safety procedures to be

applied by all contractors for the duration of the contract

Where any H&S issues have been omitted in the specification, and the contractor is aware of

these, the omitted issues must be documented in the plan, and the client/agent must be advised of

the omission.

Eskom will evaluate each contractor for its health and safety plan. A health and safety plan will be

accepted and signed by an Eskom SHE functionary, and approved and signed by the contract

custodian. The main contractor is required to evaluate its appointed contractors and proof of

compliance shall be included in the main contractor’s safety file. The contractor shall not be

allowed to commence work on site until the health and safety file has been accepted and

approved.

3.41 Safety, Health and Environment (SHE) File

An SHE file means a file or other record in permanent form, containing the information about the

health and safety management system for the project and the site during the project, and all

information relating to the post-project phase after handover to the client.

All Eskom contractors and their appointed contractors are required to keep a SHE file on every

project worksite. If there is more than one worksite per specific project and scope of work, a file for

a particular site and scope of work shall be kept at that site. Contractors may keep additional files

at their head office as additional records. The SHE file shall be maintained by all the contractors

on their construction sites and shall be available on request for audit and inspection purposes.

The main contractor is responsible for ensuring that its contractor(s) maintain a SHE file and

adhere to the SHE plans at all times during the duration of their appointment. However, this does

not take away the authority from Eskom staff members to regularly inspect and audit their

contractor’s SHE file.

3.42 Hours of work

The Basic Conditions of Employment Act, 1997 (Act No. ), stipulates the permissible

working hours for individuals to perform their duties optimally.

Staff consistently working excessive hours of overtime risk their health and safety and that of their

colleagues due to fatigue.

Fatigue can have deadly consequences, especially in environments where a loss of alertness can

threaten the health and safety of the employee or others.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the

user to ensure it is in line with the authorized version on the system.

No part of this document may be reproduced without the expressed consent of the copyright holder, Eskom Holdings SOC Ltd,

Reg No 2002/015527/30.

• Must be a registered legal entity (supplier, vendor, or contractor) in South Africa.
• Demonstrated experience in transformer handling, removal, and disposal (preferably for Eskom or similar utility projects).
• Compliance with Eskom’s procurement and supply chain policies (32-1034).
• Must have a valid SHE management system (auditable and compliant with ISO 9001 and OHS Act).
• No record of serious SHE violations or non-compliance with Eskom standards in past projects.
• Ability to appoint competent health and safety officers (registered with relevant statutory bodies).
• Compliance with Eskom’s Disciplinary Code (32-1112) and Disciplinary Procedure (32-1113).
• Access to specialized equipment for transformer removal (e.g., cranes, transport vehicles meeting Eskom’s Vehicle Safety Specification).
• Expertise in hazardous material handling (if the transformer contains oil or other contaminants).
• Ability to secure and transport heavy equipment safely (5 MVA transformer may weigh ~20-30 tons).
• Financial stability to purchase the transformer (if required) and cover project costs.
• Proof of insurance (e.g., public liability, worker’s compensation).

• Scope: Purchase, collect, and remove a 5 MVA vandalized transformer (serial number T-2199 39-112) located at Ga-Maja Substation.
• Safety: Contractor must comply with Eskom's Contractor Health and Safety Requirements (Standard 32-136), including:
• Conduct risk assessments for all tasks.
• Provide and maintain a SHE file and SHE plan.
• Comply with Life-Saving Rules (e.g., open/isolate/test/earth before touch, hook up at heights, buckle up, be sober, permit to work).
• Appoint competent health and safety officers and ensure training.
• Ensure all equipment and materials meet manufacturer and legislative safety requirements.
• Manage hazardous materials (e.g., transformer oil) in accordance with OHS Act and SANS standards.
• Implement emergency preparedness and first-aid arrangements.
• Maintain housekeeping and workplace signage.
• Report monthly OHS statistics to Eskom.
• Transport: Vehicles and mobile equipment must comply with National Road Traffic Act, OHS Act Construction Regulation 23, and Eskom Vehicle Safety Specification.
• Working at heights: Fall protection plans and rescue plans required if applicable.
• Permits: Obtain necessary permits for work on Eskom power systems or in proximity to power lines.
• Environmental care: Duty of care to environment; manage waste and hazardous materials responsibly.

• Risk assessments must be kept updated; significant changes or new hazards require new assessments.

• Contractor, as employer, must abide by Eskom's SHE requirements and relevant safety, health, and environmental legislation.

• Record keeping: relevant documentation kept for auditing or inspection purposes.

• Provide information on how the system operates in practice.
• Identify areas where remedial action is required.
• Provide a basis for continual improvement.

• Provide pricing for purchase, collection, and removal of the transformer.
• Financial capacity to purchase the transformer (if required) and cover project costs.
• Proof of insurance (e.g., public liability, worker’s compensation).
• Payment terms as per contract (not specified in document).

• CSD: Must be registered on the Central Supplier Database (CSD) for Eskom procurement.
• Tax: Must have valid tax clearance (SARS).
• B-BBEE: Must provide B-BBEE certificate or affidavit (as per Eskom requirements).
• CIDB: Not explicitly mentioned, but may be required for construction-related work.
• CIPC: Must be a registered legal entity with CIPC.
• Professional registrations: Project managers and supervisors must be registered with SACPCMP (if applicable).
• OHS Act: Must comply with Occupational Health and Safety Act, 1993 and its regulations.
• Local content: Not specified.

• Working at heights: prevent falls at any level; take precautions where reasonably practicable.

• Asbestos-containing materials management per Asbestos Regulations of OHS Act.
• Noise: hearing conservation programme if 8-hour rating level ≥85 dBA.
• Auditing: regular audits to maintain efficiency and statutory observance.

• Eskom's Group Chief Executive has overall responsibility for health and safety.
• Duties may be delegated to section 16(2) appointees and responsible managers.
• Contractors must abide by Eskom's SHE requirements and relevant legislation.
• Appointed managers responsible for H&S on sites under their control.

• Contractors shall carry out duties per sections 8 and 9, and regulation 7 of Construction Regulations of OHS Act.

• Occupational hygiene: identification, evaluation, and control of environmental factors.
• Project management: scope, time, quality, and budget constraints.
• Safety, health, and environmental compliance as per Eskom standards.

Supply Chain

Management Procedure 32-1034. Any addenda to an issued Invitation to Tender will be

published or issued in the same way as the Invitation to Tender was and will form part of the

Invitation to Tender documents.

Communication 1.5 Every communication between Eskom and a tenderer shall be made to or from the Eskom

Representative only, in w

of a tenderer.

Cost of tendering 2.6 Accept that Eskom will not compensate the tenderer for any costs incurred in the preparation

and submission of a tender, including the costs of any testing necessary to demonstrate that

aspects of the tender satisfy the evaluation criteria, or the negotiation of any contract.

Submitting a tender 2.7 Check the Invitation to Tender documents on receipt and notify the Eskom representative of

any discrepancy or omitted documents. The Acknowledgement Form must be completed

and submitted with the tender and must clearly state if the tender is for the whole or part of

the works, services or supply identified in the specification and/or works information by

reasonable time for tenderers to make consequential adjustments to their tenders before

the closing date and time for submission.

In writing’ means hand-written, typed, type-written, printed or electronically made, and that

results in a permanent record.

Insurance 2.17 The extent (if any) of insurance provided by Eskom may not be for the full cover required in

the conditions of contract. The tenderer is advised to seek qualified advice regarding

insurance.

Pricing the tender 2.18 Include in the rates, prices, and the tendered total of the Prices all duties, taxes (including

VAT), and other levies payable by the tenderer if successful. Such duties, taxes and levies

are those applicable 14 (fourteen) days prior to the closing date and time for tender

submission.

2.19 Provide rates and Prices that are fixed for the duration of the contract and are not subject to

contract price adjustment except as provided for in the Invitation to Tender.

2.20 State the rates and Prices in South African Rand unless instructed otherwise in the Invitation

to Tender. The selected conditions of contract may provide for part payment in other

currencies. Therefore, submit Rates/Prices in Rands in accordance with the exchange rate

and base date as stipulated in the Invitation to tender.

Alterations to 2.21 May not make any alterations or additions to the tender documents, other than for purposes

documents of complying with instructions issued by the Eskom Representative or if necessary to correct

errors made by the tenderer. All such alterations shall be initialed by all signatories to the

tender. Corrections may not be made using correction fluid, correction tape or the like.

Alternative tenders 2.22 Submit alternative tenders only if a main tender is also submitted, and only if the submission

of alternative tenders is permitted by the Invitation to Tender. Accept that an alternative

tender may be based only on the criteria stated in the Tender Data.

Clarification and 2.23 Provide clarification and documents as may be required by the Eskom Representative

correction of Prices during the evaluation of tenders. However, documents identified as mandatory tender

after tender returnables that are required to be submitted at the closing date and time for tender

submission submission will not be requested and may not be submitted after the closing date and time.

phases, as this is regarded as ‘double dipping’.

Designated 3.12 Tenderers are also required to submit information on designated material and

materials and thresholds no later than contract award. If this information is not completed and

thresholds submitted as indicated in the Invitation to Tender, your tender will not be considered for

contract award

Functionality 3.13 If functionality is a criterion, tenderers will be scored against the functionality criteria and

requirements will be required meet the minimum threshold stated in the Tender Data to proceed to

further evaluation.

Financial analysis 3.14 Eskom has to determine the risk of doing business with a supplier who may pose a

(if applicable) financial risk to Eskom in the execution of the contract. During evaluation of a tenderer’s

financial statements, Eskom will attempt to identify mitigating factors or requirements for

the tenderer to meet, if such factors/requirements exist in the tender’s context. However,

should suitable mitigating factors not exist in the tender’s context or should mitigating

factors exist but be insufficient or if the risk is considered to be too high or should the

tenderer not agree with the mitigating factors, the tenderer will not be considered for

award.

Evaluation of Price 3.15 Evaluate the Price in accordance with the criteria/requirements in the Tender Data. Factors

such as CPA, FOREX, commodity exposure, unconditional discounts, technical

adjustment, PV and forecasted rates of invoicing are taken into account when determining

the evaluation Price.

Arithmetical errors 3.16 Check responsive tenders for arithmetical errors. If there is a discrepancy between an

amount in figures and the amount in words, the amount in words shall prevail.

Check the highest-ranked tenders for the following errors or omissions: -

(a) the misplacement of the decimal point in any unit rate; or

(b) omissions in completing the pricing schedule or bill of quantities, or

(c) arithmetical errors in line-item totals that are the result of the incorrect multiplication

of a unit rate and a quantity in a bill of quantities or schedule of prices; or

(d) arithmetical errors that are the result of the incorrect addition of the prices.

will request the tenderer to either confirm the prices as tendered or to accept the

corrected prices.

Where the tenderer elects to confirm the prices as tendered; Eskom will correct the error

as follows: -

(a) If a bill of quantities or pricing schedule applies and there is an error in the line-item

total that is the result of an error in multiplying the unit rate and the quantity, the line-

item total shall prevail, and the rate shall be corrected.

(b) Where there is a misplacement of the decimal point in the unit rate, the line-item total

as quoted shall prevail, and the unit rate shall be corrected.

(c) Where there is an error in the total of the prices that is the result either of other

corrections required by the checking process or in the tenderer’s addition of prices,

the total of the prices shall prevail, and the tenderer shall be asked to revise the

selected item prices (and their rates if a bill of quantities applies) to result in the

tendered total of the prices.

documentation by closing date and time of tender submission, the tenderer will not be

disqualified if otherwise evaluated as acceptable in all other criteria; however, the tenderer

will score zero points for Specific Goals within the 90/10 or 80/20 allocation of points.

Ranking of tenders 3.19 According to the PPPFA, Eskom will add the score for Pricing and the Specific Goals

together and rank the suppliers from the highest to the lowest.

Objective criteria 3.20 A contract may be awarded to a tenderer that did not score the highest points only in

accordance with Section 2(1) (f) of the Preferential Procurement Policy Framework Act,

2000. If Eskom intends to apply Objective Criteria envisaged in section 2(1)(f), Eskom

must stipulate the Objective Criteria in the Invitation to Tender. Functionality and any

element of the B-BBEE scorecard may not be used as Objective Criteria.

tenderers that Eskom has identified. A sole source and a single source are regarded as a

tenderer that meets the requirements stated in the Eskom Procurement and Supply Chain

Management Procedure 32-1034. Any addenda to an issued Invitation to Tender will be

published or issued in the same way as the Invitation to Tender was and will form part of the

Proof of authority 2.25 Where an agent submits a tender on behalf of a principal, an authenticated copy of the

to act as agent authority to act as an agent of the tenderer must be submitted as a tender returnable.

Compliance with 2.26 Comply with relevant legislation and regulatory instruments such as Instruction Notes issued

relevant legislation by National Treasury, CIDB Regulations for construction works; materials designated for local

(NT instructions, content and/or production by the dtic, PPPFA Regulations; Amended B-BBEE Codes, COIDA;

CIDB, PPPFA etc) OHS Act; Eskom’s requirements for Safety, Health, Environment and Quality (SHEQ) and any other

applicable legislation or regulatory instruments indicated in the Invitation to Tender.

Proof of Safety, 2.27 Tenderers are required to provide proof to the satisfaction of Eskom that safety, health,

Health, environmental and quality (SHEQ) systems, policies and capabilities are in place at the

requirements tender.

CIDB 2.28 Where the Tender Data has stipulated CIDB grading/s as a qualification criterion, tenderers

are required to be registered with the Construction Industry Development Board at the

closing date and time for submission of tenders or to be capable of being so registered

within twenty-one (21) working days from the closing date and time for submission of

tenders.

Where CIDB is applicable; proof of registration on CIDB is mandatory at the closing date

and time for tender submission. Should this not be received as stipulated in the Invitation to

Tender; the tender will be disqualified. However, in the event that, at the closing date and

time for tender submission, only proof of application for registration on CIDB is available,

then this must be submitted by the closing date and time for tender submission, while the

actual proof of CIDB registration (printout from CIDB database) must be submitted by

contract award

Contract Skills 2.29 If the tenderer is awarded a contract, it, as Contractor, shall achieve in the performance of

Development Goal the contract the Contract Skills Development Goals (CSDG) established in the CIDB

(CSDG) Standard for Developing Skills through Infrastructure Contract (published in GN 1779,

Government Gazette No. April 2023)

that has a duration of 12 months or more, and to:

a contract of R5 million or more, in the case of a professional service or service contract

or an order issued in terms of such a contract; or

a CIDB grading designation of grade 7 or higher, in case of an engineering and

construction works, or design and build contract or an order issued in terms of such a

contract.

Contract 2.30 The Contractor shall achieve in the performance of the contract the Contract Participation

Participation Goals Goals (CPG) relating to the engagement of targeted enterprises as established in the CIDB

(CPG) standard for indirect targeting for enterprise development through Construction works

contracts (published in Government Gazette No. February 2013).

enterprises as established in the aforesaid standard applies to:

construction works contracts in the General Building (GB) and to Civil Engineering (CE)

classes of construction works;

construction works contracts of an estimated minimum project duration of 6 months; and

construction works contracts in which at least 25% of the main contract could reasonably

be expected to be subcontracted out in one or more of the following CIDB classes of

construction works:

Civil Engineering (CE)

Electrical Engineering Work (EB)

) General Building Works (GB)

) Mechanical Engineering (ME)

2.31 Eskom may disqualify a tender if it is found that the tenderer has misrepresented or

falsified any information, certificate, affidavit or document. Eskom will report any fraud

in relation to a tenderer’s B-BBEE certificate/affidavit, or evidence of ‘fronting’ as

defined in the B-BBEE Act , as amended, to the B-BBEE Commission. The

tenderer will be suspended from business with any State-Owned Company for up to 10

years and may even be sentenced to jail.

2.32 Tenderers are also required to complete fully and submit the SDL&I Undertaking

(annexure to the Invitation to Tender) by no later than contract award. If the SDL&I

Respond 3.1 Respond to a request for clarification that Eskom receives before the closing date for

clarification clarification or queries. Eskom’s responses will be published to all tenderers in the same

manner the Invitation to Tender documents were issued. It is the tenderers’ responsibility

to check the Eskom Tender Bulletin and NT e-Tender Portal regularly for updated

responses to clarifications.

Issue Addenda 3.2 If necessary and prior to the closing date and time for tender submission, amend, amplify, or

add to the Invitation to Tender documents by way of Addenda published in the same

platform that the Invitation to Tender was issued. It is the tenderers’ responsibility to

check the Eskom Tender Bulletin and NT e-Tender Portal regularly for Addenda.

electronically. The Eskom Representative will publish the names of all tenderers received

on the Eskom Tender Bulletin and NT e-Tender Portal.

Tender Prices 3.5 Eskom will announce the names of the tenderers. Prices may be announced if so, stated

in the Tender Data.

Non-disclosure 3.6 Unless required by law, Eskom will not disclose information relating to the evaluation and

comparison of tenders and recommendations for the award of a contract to tenderers or to

any other person not officially concerned with the tender process until after the tender

award.

Grounds for 3.7 Reject a tender if Eskom establishes that there is proof that the tenderer influenced the

rejection processing of tenders or the awarding of the contract, the existence of collusion and/or bid

rigging, and/or that the tenderer has participated in any fraudulent/illegal activity in

connection with the Invitation to Tender.

Clarification of a 3.8 Obtain clarification from a tenderer in respect of any matter in the tender that may not be

tender clear or that could give rise to ambiguity in a contract arising from this tender if the matter

were not to be clarified. A document that the Invitation to Tender identifies as a mandatory

tender returnable that is required to be submitted at the closing date and time for tender

submission will not be requested, but Eskom may seek clarity on it.

may utilise reverse e-auction in certain Enquiries. Where reverse e-auction will be utilised,

this will be indicated in the respective Invitation to Tender and the reverse e-auction

supporting documents will be issued in the Invitation to Tender. Tenderers will be required

to submit a complete tender that does not contain Prices. If a tenderer has included prices

in its tender, the prices will not be considered.

Acceptance of 3.22 Notify Eskom's acceptance to the successful tender before the expiry of the validity period

tender or agreed additional validity period. Inform the successful and unsuccessful tenderers only

once approval has been granted by the Eskom Adjudication Authority. For open tenders,

this notification must be published on the Eskom Tender Bulletin and NT e-Tender Portal

Prepare contract 3.23 Revise the contract documents issued by Eskom in the Invitation to Tender documents to

documents take account of:

 Addenda issued during the tender period;

 inclusion of returnables stipulated in the Invitation to Tender;

 inclusion of changes agreed in contract negotiations; and

 Other revisions or documents agreed to between Eskom and the successful

tenderer during negotiations,

Sign Form of 3.24 Arrange for authorised signatories of both parties to complete and sign the original and one

including the Eskom Representative shall not be liable for any losses, claims or damages of

whatsoever nature or howsoever arising that may be sustained by a tenderer or any other

person as a result of its participation in the tender or from any amendment, termination or

suspension of the process set out in the Invitation to Tender or from its exclusion from

participating in the tender process at any point.

Eskom’s right to 1.7 Eskom reserves the right to enter into mandated negotiations with any, one or more selected

negotiate tenderer(s) in accordance with Eskom’s approved procurement policies and procedures.

240-62044728 Rev 12 Eskom Standard Identifier

Conditions of Tender Effective Date 01 February 2025

Review Date January 2030

Disclaimer 1.8 While Eskom takes all reasonable measures to ensure that all information contained in the

regarding accuracy tender documents is correct and complete, Eskom does not, however, make any

of tender representations or warranties, express or implied, as to the accuracy or completeness of

documents such information and Eskom expressly disclaims any, and all liability for such

representations, warranties or statements.

Tenderer’s 2. The tenderer shall comply with the following obligations when submitting a tender and shall:

Tender validity 2.12 Hold the tender(s) valid for acceptance by Eskom at any time within the validity period after

the closing date and time for tender submission. Extend the validity period for a specified

additional period if Eskom requests the tenderer to do so. A tenderer that agrees to extend

the validity of its tender will not be required or permitted to modify its tender. A tenderer that

does not agree to extend the validity of its tender will be excluded from further

consideration. Tenderers will be requested to extend the validity of their tenders until a

contract(s) have been concluded with one or more tenderers. A request that a tenderer

extend the validity of its tender is not a representation that the tender is an acceptable

tender or that Eskom will seek to negotiate or conclude a contract with the tenderer. If the

validity of tenders expires before contracts have been concluded, the procurement process

is deemed to have concluded without an award.

Confidentiality and 2. 13 Treat as confidential all matters that arise in connection with the procurement. Use and copy

copyright of the documents provided by Eskom only for the purpose of preparing and submitting a tender

documents in response to this Invitation to Tender.

Standardised 2.14 Obtain and familiarise themselves with, if required for the purposes of submitting a tender,

specifications and the latest revision of standardised specifications and/or other documents that have been

other publications incorporated by reference into the Invitation to Tender documents by reference.

Site visit and / or 2.15 Tenderers must attend a site visit and/or clarification meeting that is stipulated as being

clarification compulsory in order to familiarise themselves with the proposed work, services, supply,

meeting location or similar. Failure to attend a clarification meeting or site visit that is identified as

compulsory will result in disqualification from participation.

Details of the meeting(s) are stated in the Tender Data. Tenderers are entitled to ask

correction of errors as required above.

Evaluation of 3.17 Score the B-BBEE level as stated on the CSD report or as per certificate/affidavit provided.

B-BBEE If the B-BBEE level is a pre-qualification criterion; then the proof of the B-BBEE level

(certificate/CSD number/CSD report) must be provided at the closing date and time for

tender submission; or the tender will be disqualified. If sub-contracting to designated groups

pre-qualification criteria are utilized (selected/mandatory) in terms of the PPPFA

Regulation, then Eskom will apply the PPPFA requirements for sub-contractors’ B-BBEE

status and the sub-contractors’ CSD number or B-BBEE certificate/affidavit will need to be

provided at the closing date and time for tender submission. Should the

information/documents provided indicate that the level is in dispute (fraudulent/ expired)

then the tender will be disqualified.

However, for the purposes of PPPFA point allocation: if no B-BBEE certificate/affidavit is

provided at Tender closing date and time for tender submission, or the

information/documents provided are fraudulent or have expired; then the tenderer will not

be disqualified (if otherwise deemed to be responsive and acceptable in all other aspects)

but will score zero under PPPFA point allocation.

Evaluation of 3.18 Score the Specific Goals with reference to the supporting documentation in the tender. If a

are submitted and accessible for downloading/evaluation without any challenges as well as

It must be noted that Eskom will not measure a criterion twice in the different evaluation

Functionality 3.13 If functionality is a criterion, tenderers will be scored against the functionality criteria and

further evaluation.

(if applicable) financial risk to Eskom in the execution of the contract. During evaluation of a tenderer’s

Evaluation of Price 3.15 Evaluate the Price in accordance with the criteria/requirements in the Tender Data. Factors

the evaluation Price.

but will score zero under PPPFA point allocation.

Evaluation of 3.18 Score the Specific Goals with reference to the supporting documentation in the tender. If a

Specific Goals tenderer fails to meet Specific Goals and/or to submit the required proof/supporting

will score zero points for Specific Goals within the 90/10 or 80/20 allocation of points.

Ranking of tenders 3.19 According to the PPPFA, Eskom will add the score for Pricing and the Specific Goals

Objective criteria 3.20 A contract may be awarded to a tenderer that did not score the highest points only in

must stipulate the Objective Criteria in the Invitation to Tender. Functionality and any

element of the B-BBEE scorecard may not be used as Objective Criteria.

Reverse e-Auction 3.21 Reverse e-auction is an electronic system that utilises the 90/10 and 80/20 Price and

Preference point systems, and which is intended to achieve competitive pricing. Eskom

(NT instructions, content and/or production by the dtic, PPPFA Regulations; Amended B-BBEE Codes, COIDA;

CIDB, PPPFA etc) OHS Act; Eskom’s requirements for Safety, Health, Environment and Quality (SHEQ) and any other

Health, environmental and quality (SHEQ) systems, policies and capabilities are in place at the

Quality Contract Award. All costs and personnel associated with SHEQ must be reflected in the

However, for the purposes of PPPFA point allocation: if no B-BBEE certificate/affidavit is

Buyer is responsible for safe collection, handling, removal, and transportation of used transformer oil, and must clean the site using qualified labour and certified plant/machinery/equipment.

Closing date: 06 August 2026 at 10:00. Site viewing: Must arrange by end of business on 03 August 2026 via Medupe Matsapola ([email protected] or 081 258 5842). Clarification requests: Eskom will respond to written requests received within 1-2 working days before the closing deadline. Offers valid for 90 days from closing date.

Commercial enquiries: Sylvia Maluleke, +27 15 299 0035, [email protected]. Technical/site viewing: Medupe Matsapola, [email protected], 081 258 5842. Submission email: [email protected]. All clarifications must be in writing to [email protected].

Submit the completed Offer to Purchase form and all required returnables via email to [email protected] only. Ensure the email subject line contains only the enquiry number OLT2128204 (no extra text, no spaces). All files must be in PDF format. Maximum attachment size per email is 10MB; split files if needed. You must receive a confirmation email; if not, follow up immediately with the asset disposal officer. Submissions received after the closing time (10:00 on 06 August 2026) will not be evaluated. Emails to any address other than [email protected] (except for clarifications) will result in disqualification. Clarification requests must be sent in writing to [email protected], not to the submission address. Ensure all returnables listed in the tender document are included; incomplete or unclear documentation may be rejected.

Sole proprietor certificate: owner confirms authority.

Evaluation is in two phases: technical evaluation (desktop and site visit) and financial evaluation. Technical evaluation (100% weight) assesses approach and methodology, including technical/mechanical ability, industry experience, ethical track record per the Second-Hand Goods Act, and confidence in effective, efficient, timeous, and economical performance. Financial evaluation weights: Best price 80%, B-BBEE 20%. Bidders must demonstrate technical capability as an inherent requirement. The final award depends on Eskom's adjudication process. Note: Bidders with existing or expired Eskom contracts that have defaulted, or with open non-conformances, will be disqualified.

Scope: Purchase, collect, and remove a 5 MVA vandalized transformer (serial number T-2199 39-112) located at Ga-Maja Substation. The transformer has been stripped; only the shell remains. Buyer must inspect the item before tendering; no disputes on condition after closing. Buyer is responsible for safe collection, handling, removal, and transportation of the transformer and used transformer oil, and must clean the site. Use qualified labour and certified plant/machinery/equipment. Site must be left clean. No littering; provide waste collection facilities during dismantling. No rubble left on site. Cutting equipment requires extra precautions; portable fire-fighting equipment must be on site. Work must comply with OHSA Act. All safety documentation must be available on site. No accommodation allowed on site. Buyer must obtain an Eskom permit before work and notify the site agent for sign-off after completion. Eskom is not responsible for damages/losses during removal. The item is sold 'voetstoots' (as is).

Technical evaluation includes a desktop and site visit inspection. Bidders must demonstrate technical capability, including necessary technical and mechanical ability, industry experience, ethical track record per Second-Hand Goods Act, and confidence in effective, efficient, timeous, and economical performance. Evaluation rates companies on a scale of 1-5 (poor to excellent) on criteria such as company documentation, VAT/tax certificate, relevant industry registration, Second-Hand Act registration, safety policy, environmental policy, security, storage facilities, dismantling/demolition capability, machinery/plant, type and number of trucks, whether they process or are agents only, and whether they buy off the street.

Total offer prices exclude VAT; payment to Eskom within 5 working days after sale, by bank cheque or electronic transfer.

Pricing will be conducted via e-Auction. Bidders must complete and submit the Acknowledgement Form for e-Auction Training. Offer price is for the 5MVA transformer, excluding VAT. Payment to Eskom must be made within 5 working days after the sale, by bank cheque or electronic transfer. Release of equipment occurs after payment and obtaining a removal/transport permit. Offers valid for 90 days. No guarantee or warranty on the equipment; sold 'voetstoots'. VAT invoices issued on request. Tax Clearance Certificate must be submitted with tender.

Mandatory returnables at tender closing (disqualification if missing): Offer to Purchase form (price schedule), valid SARS Tax Clearance Certificate, B-BBEE affidavit (DTI template) or verification certificate from accredited agency, Second-hand goods certificate from SAPS/Licensee, SBD4 Bidder's Disclosure, Integrity Pact Declaration Form, CIPRO registration documents, copies of ID documents of directors, proof of CSD registration (or CSD number), valid COID letter of good standing, Authority to Submit a Tender, Safety Requirements, Environmental Requirements. Additional compliance: Not listed on National Treasury's Database of Restricted Suppliers or Register for Tender Defaulters. No convictions for fraud/corruption in past 5 years. No default on existing/expired Eskom contracts or open non-conformances. Tax compliance is absolute; incorrect or missing certificate may lead to recovery of costs or cancellation of agreement. Each consortium/subcontractor must complete separate declarations.

Contractor agrees to comply with OHSA and SHE specifications.

Waste management plan: parts of scraps disposed must be at licensed municipal landfill sites.

Agreement signing details: date, place, full names, signatures, witnesses.

Adhere to conditions laid out by the Eskom site agent regarding site access.

Total 100% for technical evaluation; comments section.