What the tender required and what the award supports
Source material and existing AI analysis appear first. Supplier conclusions remain qualified by the evidence Tenders-SA holds.
Summary
This tender invites bids for the construction of a 1 megawatt solar photovoltaic plant at the sansa hartebeesthoek site in krugersdorp, gauteng. The project involves installing pv modules, inverters, transformers, distribution boards, and associated electrical infrastructure to support the space agency's operations.
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
Review in progress
The information shown on this card is preliminary. Our procurement team is currently finalising the submission guidelines, evaluation criteria, technical specifications, financial requirements, and compliance sections so you have a clean, bid-ready summary to work from. Document being finalised: Annexure B- Tender Drawings.pdf. You don’t need to refresh — this page will pick up the updated review automatically.
DocumentAnnexure B- Tender Drawings.pdfCompliance review in progress
Award analysis coverage
0 of 1 source documents fully reviewed. Unstated details are identified only after complete source review.
technical scope
Source analysis requires completion or review
financial capacity
Source analysis requires completion or review
pricing
Source analysis requires completion or review
compliance returnables
2 sourced criteria
evaluation
Source analysis requires completion or review
experience
Source analysis requires completion or review
personnel
2 sourced criteria
equipment capacity
Source analysis requires completion or review
delivery contract
Source analysis requires completion or review
equity registrations
2 sourced criteria
What the buyer was looking for
1Mandatory requirement
No specific requirements found
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
The linked award records NEWTHINGS LEFATSHE as appointed for this tender. Recorded contract value: 23612431 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
An award confirms appointment. It does not prove why a supplier was selected, that every qualification remains current, or that delivery was completed successfully.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
Contact Information
Source: Annexure B- Tender Drawings.pdf
Consulting Engineer: Khulandle Consulting Engineers SA CC. Address: 62 Van Ryneveld Ave., Pierre Van Ryneveld, Pretoria, 0045. Phone: (012) 662 3611. Email: [email protected]. Website: www.khulacon.com
Technical Specifications
Source: Annexure B- Tender Drawings.pdf
Scope: Construction of a 1 Megawatt Solar Photovoltaic Plant at SANSA Hartebeesthoek site, Krugersdorp. Key Components: PV Solar Modules (JAM72S30 555/MR, 555W each), Inverters (100kW and 150kW Hybrid Power Systems), Transformers (11kV/400V, 315kVA and 400kVA), Distribution Boards, Switchgear, Surge Protective Devices, Combiner Boxes, Battery Packs (200kWh), and Monitoring Systems (Data Logger, Router, Local Monitoring). Standards: All work must comply with latest SANS standards (SANS 10142-1, SANS 1816, SANS 1974, SANS 187, SANS 1874), relevant codes, and municipal by-laws. Requirements: Contractor must verify site conditions, take own measurements, coordinate with other service providers, and ensure all equipment is approved by the consulting engineer before delivery. Testing: Factory Acceptance Test (FAT) as per SANS 187 and on-site tests as per SANS 1874 clause 5. Documentation: Supply all wiring diagrams and major equipment documentation. Training: Provide training for at least one qualified staff member on operation and maintenance. Housing: Equipment must be housed in a fully air-conditioned and ventilated shipping container. Cable Specifications: Use specified PVC/PVC or SWA/PVC/PVC Cu. cables with BCEW as per wire schedule (e.g., 35mm2 to 300mm2 4-core cables). Additional: Inverter must have built-in bypass switch. Cable joints must be done by certified personnel. As-built drawings required for cable routes.
Compliance Requirements
Source: Annexure B- Tender Drawings.pdf
B-BBEE Minimum Level: 5. Standards Compliance: SANS 10142-1, SANS 1816, SANS 1974, SANS 187, SANS 1874. Equipment Approval: Written approval from consulting engineer required before equipment delivery to site. Certification: Cable joints must be carried out by certified personnel.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
2Inferred operational need
Please bring safety boots & reflective otherwise, you will not be allowed to enter the site
Why it matters: This is a qualified operational interpretation of the stored scope, not a stated mandatory or scored criterion.
Inferred from stored analysis; verify against the source document. No source document identifier is stored for this item.
Source: Eligibility criteria · eligibility
Known supplier evidence
The linked award records NEWTHINGS LEFATSHE as appointed for this tender. Recorded contract value: 23612431 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
3Mandatory requirement
Compliance with SANS standards (10142-1, 1816, 1974, 187, 1874) and municipal by-laws is mandatory. All equipment must receive written approval from the consulting engineer (Khulandle Consulting Engineers) before site delivery. Factory Acceptance Testing (FAT) and on-site testing per SANS 187/1874 are required, with results submitted within 3 days. Equipment must be housed in a fully air-conditioned and ventilated shipping container. Contractor must coordinate with other service providers and provide as-built drawings for cable routes. Training for at least one staff member on system operation and maintenance is mandatory.
Threshold: at least one staff member on system operation and maintenance is mand
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
Source: AI key requirements · requirements
Known supplier evidence
Tenders-SA records other appointments with overlapping scope terms for NEWTHINGS LEFATSHE.
Qualified inference
Supported inference
The recorded history supports exposure to related scope, but does not establish the bid evidence submitted or current delivery capacity.
Related historical records suggest exposure; they do not prove bid contents, current capacity, or delivery.
4Mandatory requirement
Scope: Construction of a 1 Megawatt Solar Photovoltaic Plant at SANSA Hartebeesthoek site, Krugersdorp. Key Components: PV Solar Modules (JAM72S30 555/MR, 555W each), Inverters (100kW and 150kW Hybrid Power Systems), Transformers (11kV/400V, 315kVA and 400kVA), Distribution Boards, Switchgear, Surge Protective Devices, Combiner Boxes, Battery Packs (200kWh), and Monitoring Systems (Data Logger, Router, Local Monitoring). Standards: All work must comply with latest SANS standards (SANS 10142-1, SANS 1816, SANS 1974, SANS 187, SANS 1874), relevant codes, and municipal by-laws. Requirements: Contractor must verify site conditions, take own measurements, coordinate with other service providers, and ensure all equipment is approved by the consulting engineer before delivery. Testing: Factory Acceptance Test (FAT) as per SANS 187 and on-site tests as per SANS 1874 clause 5. Documentation: Supply all wiring diagrams and major equipment documentation. Training: Provide training for at least one qualified staff member on operation and maintenance. Housing: Equipment must be housed in a fully air-conditioned and ventilated shipping container. Cable Specifications: Use specified PVC/PVC or SWA/PVC/PVC Cu. cables with BCEW as per wire schedule (e.g., 35mm2 to 300mm2 4-core cables). Additional: Inverter must have built-in bypass switch. Cable joints must be done by certified personnel. As-built drawings required for cable routes.
Threshold: at least one qualified staff member on operation and maintenance
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
The linked award records NEWTHINGS LEFATSHE as appointed for this tender. Recorded contract value: 23612431 ZAR.
Qualified inference
Inference only
The successful bid likely addressed this expectation, but the submitted evidence and evaluation reason are unavailable.
The linked award confirms appointment only, not the submitted qualification or reason for selection.
6Mandatory requirement
B-BBEE Minimum Level: 5. Standards Compliance: SANS 10142-1, SANS 1816, SANS 1974, SANS 187, SANS 1874. Equipment Approval: Written approval from consulting engineer required before equipment delivery to site. Certification: Cable joints must be carried out by certified personnel.
Threshold: Minimum Level: 5
Why it matters: The source identifies this as a mandatory or eligibility condition for a compliant bid.
No source document identifier is stored for this item.
Tenders-SA records other appointments with overlapping scope terms for NEWTHINGS LEFATSHE.
Qualified inference
Supported inference
The recorded history supports exposure to related scope, but does not establish the bid evidence submitted or current delivery capacity.
Related historical records suggest exposure; they do not prove bid contents, current capacity, or delivery.
APPOINTMENT OF THE SERVICE PROVIDER FOR PROVISION OF HYGIENE CARE SERVICES FOR 2 YEARS (24 MONTHS) AT THE NATIONAL RESEARCH FOUNDATION PREMISES IN PRETORIA, BRUMMERIANRF/ CORP EM 65 /2025-26