Closed: RFQ GSM068/2026: ibm planning analytics support – saa

At a GlanceAI Enhanced

Tender Type

Request for Quotation

Delivery Location

32 Jones Road, Airways Park, Johannesburg (Head Office) - Kempton Park - Isando - 1627

Organization Type

GOVERNMENT

Published

11 Sept 2026

OCDS Reference

ocds-9t57fa-170087

Summary

South african airways is requesting quotations for ibm planning analytics (tm1) professional support services. Bidders must complete the vendor application form and submit IT with all supporting documents by email to [email protected]. The most consequential requirement is that bidders must be registered as vendors with saa and provide a full set of certified company, tax, b-bbee and banking documents.

Key Requirements

Bidders must submit the completed vendor application form and all supporting documents by email to [email protected].

Supporting documents required: cancelled cheque or stamped bank confirmation letter not older than one year, latest valid B-BBEE certificate or affidavit, latest valid tax clearance certificate or SARS PIN on official SARS documentation, CSD registration report, certified company registration documents, certified copies of identity documents of shareholders, certified shareholders' certificates, and a copy of the contract if already a contracted supplier.

Bidders must provide B-BBEE details including certificate number, verification and expiry dates, applicable scorecard (EME/QSE/General), status level, enterprise development, value adding, percentage black ownership, black women ownership, black people with disabilities, years in operation, and annual turnover.

Bidders must provide bank and tax details including VAT registration number, tax clearance certificate number, approved date and expiry date.

Bidders must provide company details including registered name, trading name, physical and postal addresses, contact person, phone, email, and fax.

Payment terms are 15 days from invoice.

The vendor application form requires sign-off by the GSM Admin Manager (SAP) and Finance Manager (Accounts Payable).

Back to All Tenders

Next Tender

Contractual Terms

Source: Annexure 3 - SAA General conditions of contract.pdf (TENDER)

Payment
Prices
Contract amendments
Assignment
Subcontracts
Delays in the supplier’s performance
Penalties
Termination for default
Dumping and countervailing duties
Force Majeure
Termination for insolvency
Settlement of disputes
Limitation of liability
Governing language
Applicable law
Notices
Taxes and duties
National Industrial Participation Programme (NIPP)
Prohibition of restrictive practices

General Conditions of Contract

Definitions

The following terms shall be interpreted as indicated:

1.1 “Closing time” means the date and hour specified in the bidding documents for the receipt of bids.

1.2 “Contract” means the written agreement entered into between the purchaser and the supplier, as recorded

in the contract form signed by the parties, including all attachments and appendices thereto and all

documents incorporated by reference therein.

1.3 “Contract price” means the price payable to the supplier under the contract for the full and proper

performance of his contractual obligations.

1.4 “Corrupt practice” means the offering, giving, receiving, or soliciting of any thing of value to influence the

action of a public official in the procurement process or in contract execution.

1.5 "Countervailing duties" are imposed in cases where an enterprise abroad is subsidized by its government

and encouraged to market its products internationally.

1.6 “Country of origin” means the place where the goods were mined, grown or produced or from which the

services are supplied. Goods are produced when, through manufacturing, processing or substantial and

major assembly of components, a commercially recognized new product results that is substantially

different in basic characteristics or in purpose or utility from its components.

1.7 “Day” means calendar day.

1.8 “Delivery” means delivery in compliance of the conditions of the contract or order.

1.9 “Delivery ex stock” means immediate delivery directly from stock actually on hand.

1.10 “Delivery into consignees store or to his site” means delivered and unloaded in the specified store or depot

or on the specified site in compliance with the conditions of the contract or order, the supplier bearing all

risks and charges involved until the supplies are so delivered and a valid receipt is obtained.

1.11 "Dumping" occurs when a private enterprise abroad market its goods on own initiative in the RSA at lower

prices than that of the country of origin and which have the potential to harm the local industries in the RSA.

1.12 Force majeure” means an event beyond the control of the supplier and not involving the supplier’s fault or

negligence and not foreseeable. Such events may include, but is not restricted to, acts of the purchaser in

its sovereign capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions and freight

embargoes.

1.13 “Fraudulent practice” means a misrepresentation of facts in order to influence a procurement process or

the execution of a contract to the detriment of any bidder, and includes collusive practice among bidders

(prior to or after bid submission) designed to establish bid prices at artificial non-competitive levels and to

deprive the bidder of the benefits of free and open competition.

1.14 “GCC” means the General Conditions of Contract.

1.15 “Goods” means all of the equipment, machinery, and/or other materials that the supplier is required to supply

to the purchaser under the contract.

1.16 “Imported content” means that portion of the bidding price represented by the cost of components, parts or

materials which have been or are still to be imported (whether by the supplier or his subcontractors) and

which costs are inclusive of the costs abroad, plus freight and other direct importation costs such as landing

costs, dock dues, import duty, sales duty or other similar tax or duty at the South African place of entry as

well as transportation and handling charges to the factory in the Republic where the supplies covered by

the bid will be manufactured.

1.17 “Local content” means that portion of the bidding price which is not included in the imported content provided

that local manufacture does take place.

1.18 “Manufacture” means the production of products in a factory using labour, materials, components and

machinery and includes other related value-adding activities.

1.19 “Order” means an official written order issued for the supply of goods or works or the rendering of a service.

1.20 “Project site,” where applicable, means the place indicated in bidding documents.

1.21 “Purchaser” means the organization purchasing the goods.

1.22 “Republic” means the Republic of South Africa.

1.23 “SCC” means the Special Conditions of Contract.

1.24 “Services” means those functional services ancillary to the supply of the goods, such as transportation and

any other incidental services, such as installation, commissioning, provision of technical assistance,

training, catering, gardening, security, maintenance and other such obligations of the supplier covered

under the contract.

1.25 “Written” or “in writing” means handwritten in ink or any form of electronic or mechanical writing.

Application

2.1 These general conditions are applicable to all bids, contracts and orders including bids for functional and

professional services, sales, hiring, letting and the granting or acquiring of rights, but excluding immovable

property, unless otherwise indicated in the bidding documents.

2.2 Where applicable, special conditions of contract are also laid down to cover specific supplies, services or

works.

2.3 Where such special conditions of contract are in conflict with these general conditions, the special conditions

shall apply.

General

3.1 Unless otherwise indicated in the bidding documents, the purchaser shall not be liable for any expense

incurred in the preparation and submission of a bid. Where applicable a non-refundable fee for documents

may be charged.

3.2 With certain exceptions, invitations to bid are only published in the Government Tender Bulletin. The

Government Tender Bulletin may be obtained directly from the Government Printer, Private Bag X85,

Pretoria 0001, or accessed electronically from www.treasury.gov.za

Standards

4.1 The goods supplied shall conform to the standards mentioned in the bidding documents and specifications.

Use of contract documents and information; inspection.

5.1 The supplier shall not, without the purchaser’s prior written consent, disclose the contract, or any provision

thereof, or any specification, plan, drawing, pattern, sample, or information furnished by or on behalf of the

purchaser in connection therewith, to any person other than a person employed by the supplier in the

performance of the contract. Disclosure to any such employed person shall be made in confidence and

shall extend only so far as may be necessary for purposes of such performance.

5.2 The supplier shall not, without the purchaser’s prior written consent, make use of any document or

information mentioned in GCC clause 5.1 except for purposes of performing the contract.

5.3 Any document, other than the contract itself mentioned in GCC clause 5.1 shall remain the property of the

purchaser and shall be returned (all copies) to the purchaser on completion of the supplier’s performance

under the contract if so required by the purchaser.

5.4 The supplier shall permit the purchaser to inspect the supplier’s records relating to the performance of the

supplier and to have them audited by auditors appointed by the purchaser, if so required by the purchaser.

Patent rights

6.1 The supplier shall indemnify the purchaser against all third-party claims of infringement of patent,

trademark, or industrial design rights arising from use of the goods or any part thereof by the purchaser.

Performance

7.1 Within thirty (30) days of receipt of the notification of contract award, the successful bidder shall furnish to

the purchaser the performance security of the amount specified in SCC.

7.2 The proceeds of the performance security shall be payable to the purchaser as compensation for any loss

resulting from the supplier’s failure to complete his obligations under the contract.

7.3 The performance security shall be denominated in the currency of the contract, or in a freely convertible

currency acceptable to the purchaser and shall be in one of the following forms:

a) a bank guarantee or an irrevocable letter of credit issued by a reputable bank located in the purchaser’s

country or abroad, acceptable to the purchaser, in the form provided in the bidding documents or

another form acceptable to the purchaser; or

b) a cashier’s or certified cheque

7.4 The performance security will be discharged by the purchaser and returned to the supplier not later than

thirty (30) days following the date of completion of the supplier’s performance obligations under the contract,

including any warranty obligations, unless otherwise specified in SCC.

Inspections, tests and analyses

8.1 All pre-bidding testing will be for the account of the bidder.

8.2 If it is a bid condition that supplies to be produced or services to be rendered should at any stage during

production or execution or on completion be subject to inspection, the premises of the bidder or contractor

shall be open, at all reasonable hours, for inspection by a representative of the Department or an

organization acting on behalf of the Department.

8.3 If there are no inspection requirements indicated in the bidding documents and no mention is made in the

contract, but during the contract period it is decided that inspections shall be carried out, the purchaser shall

itself make the necessary arrangements, including payment arrangements with the testing authority

concerned.

8.4 If the inspections, tests and analyses referred to in clauses 8.2 and 8.3 show the supplies to be in

accordance with the contract requirements, the cost of the inspections, tests and analyses shall be defrayed

by the purchaser.

8.5 Where the supplies or services referred to in clauses 8.2 and 8.3 do not comply with the contract

requirements, irrespective of whether such supplies or services are accepted or not, the cost in connection

with these inspections, tests or analyses shall be defrayed by the supplier.

8.6 Supplies and services which are referred to in clauses 8.2 and 8.3 and which do not comply with the contract

requirements may be rejected.

8.7 Any contract supplies may on or after delivery be inspected, tested or analyzed and may be rejected if found

not to comply with the requirements of the contract. Such rejected supplies shall be held at the cost and

risk of the supplier who shall, when called upon, remove them immediately at his own cost and forthwith

substitute them with supplies which do comply with the requirements of the contract.

8.8 Failing such removal the rejected supplies shall be returned at the suppliers cost and risk. Should the

supplier fail to provide the substitute supplies forthwith, the purchaser may, without giving the supplier

further opportunity to substitute the rejected supplies, purchase such supplies as may be necessary at the

expense of the supplier.

8.9 The provisions of clauses 8.4 to 8.7 shall not prejudice the right of the purchaser to cancel the contract on

account of a breach of the conditions thereof, or to act in terms of Clause 23 of GCC.

Packing

9.1 The supplier shall provide such packing of the goods as is required to prevent their damage or deterioration

during transit to their final destination, as indicated in the contract. The packing shall be sufficient to

withstand, without limitation, rough handling during transit and exposure to extreme temperatures, salt and

precipitation during transit, and open storage. Packing, case size and weights shall take into consideration,

where appropriate, the remoteness of the goods’ final destination and the absence of heavy handling

facilities at all points in transit.

9.2 The packing, marking, and documentation within and outside the packages shall comply strictly with such

special requirements as shall be expressly provided for in the contract, including additional requirements, if

any, specified in SCC, and in any subsequent instructions ordered by the purchaser.

Delivery and documents

10.1 Delivery of the goods shall be made by the supplier in accordance with the terms specified in the contract.

The details of shipping and/or other documents to be furnished by the supplier are specified in SCC.

10.2 Documents to be submitted by the supplier are specified in SCC.

Insurance

11.1 The goods supplied under the contract shall be fully insured in a freely convertible currency against loss or

damage incidental to manufacture or acquisition, transportation, storage and delivery in the manner

specified in the SCC.

Transportation

12.1 Should a price other than an all-inclusive delivered price be required, this shall be specified in the SCC.

Incidental services

13.1 The supplier may be required to provide any or all of the following services, including additional services, if

any, specified in SCC:

a) performance or supervision of on-site assembly and/or commissioning of the supplied goods;

b) furnishing of tools required for assembly and/or maintenance of the supplied goods;

c) furnishing of a detailed operations and maintenance manual for each appropriate unit of the supplied

goods;

d) performance or supervision or maintenance and/or repair of the supplied goods, for a period of time

agreed by the parties, provided that this service shall not relieve the supplier of any warranty obligations

under this contract; and

e) training of the purchaser’s personnel, at the supplier’s plant and/or on-site, in assembly, start-up,

operation, maintenance, and/or repair of the supplied goods.

13.2 Prices charged by the supplier for incidental services, if not included in the contract price for the goods,

shall be agreed upon in advance by the parties and shall not exceed the prevailing rates charged to other

parties by the supplier for similar services.

Spare parts

14.1 As specified in SCC, the supplier may be required to provide any or all of the following materials,

notifications, and information pertaining to spare parts manufactured or distributed by the supplier:

a) such spare parts as the purchaser may elect to purchase from the supplier, provided that this election

shall not relieve the supplier of any warranty obligations under the contract; and

b) in the event of termination of production of the spare parts:

(i) Advance notification to the purchaser of the pending termination, in sufficient time to permit the

purchaser to procure needed requirements; and

(ii) following such termination, furnishing at no cost to the purchaser, the blueprints, drawings, and

specifications of the spare parts, if requested.

15.1 The supplier warrants that the goods supplied under the contract are new, unused, of the most recent or

current models, and that they incorporate all recent improvements in design and materials unless provided

otherwise in the contract. The supplier further warrants that all goods supplied under this contract shall have

no defect, arising from design, materials, or workmanship (except when the design and/or material is

required by the purchaser’s specifications) or from any act or omission of the supplier, that may develop

under normal use of the supplied goods in the conditions prevailing in the country of final destination.

15.2 This warranty shall remain valid for twelve (12) months after the goods, or any portion thereof as the case

may be, have been delivered to and accepted at the final destination indicated in the contract, or for eighteen

(18) months after the date of shipment from the port or place of loading in the source country, whichever

period concludes earlier, unless specified otherwise in SCC.

15.3 The purchaser shall promptly notify the supplier in writing of any claims arising under this warranty.

15.4 Upon receipt of such notice, the supplier shall, within the period specified in SCC and with all reasonable

speed, repair or replace the defective goods or parts thereof, without costs to the purchaser.

15.5 If the supplier, having been notified, fails to remedy the defect(s) within the period specified in SCC, the

purchaser may proceed to take such remedial action as may be necessary, at the supplier’s risk and

expense and without prejudice to any other rights which the purchaser may have against the supplier under

the contract.

Payment

16.1 The method and conditions of payment to be made to the supplier under this contract shall be specified in

Scc.

16.2 The supplier shall furnish the purchaser with an invoice accompanied by a copy of the delivery note and

upon fulfillment of other obligations stipulated in the contract.

16.3 Payments shall be made promptly by the purchaser, but in no case later than thirty (30) days after

submission of an invoice or claim by the supplier.

16.4 Payment will be made in Rand unless otherwise stipulated in SCC.

Prices

17.1 Prices charged by the supplier for goods delivered and services performed under the contract shall not vary

from the prices quoted by the supplier in his bid, with the exception of any price adjustments authorized in

SCC or in the purchaser’s request for bid validity extension, as the case may be.

Contract amendments

18.1 No variation in or modification of the terms of the contract shall be made except by written amendment

signed by the parties concerned.

Assignment

19.1 The supplier shall not assign, in whole or in part, its obligations to perform under the contract, except with

the purchaser’s prior written consent.

Subcontracts

20.1 The supplier shall notify the purchaser in writing of all subcontracts awarded under this contracts if not

already specified in the bid. Such notification, in the original bid or later, shall not relieve the supplier from

any liability or obligation under the contract.

Delays in the supplier’s performance

21.1 Delivery of the goods and performance of services shall be made by the supplier in accordance with the

time schedule prescribed by the purchaser in the contract.

21.2 If at any time during performance of the contract, the supplier or its subcontractor(s) should encounter

conditions impeding timely delivery of the goods and performance of services, the supplier shall promptly

notify the purchaser in writing of the fact of the delay, its likely duration and its cause(s). As soon as

practicable after receipt of the supplier’s notice, the purchaser shall evaluate the situation and may at his

discretion extend the supplier’s time for performance, with or without the imposition of penalties, in which

case the extension shall be ratified by the parties by amendment of contract.

21.3 No provision in a contract shall be deemed to prohibit the obtaining of supplies or services from a national

department, provincial department, or a local authority.

21.4 The right is reserved to procure outside of the contract small quantities or to have minor essential services

executed if an emergency arises, the supplier’s point of supply is not situated at or near the place where

the supplies are required, or the supplier’s services are not readily available.

21.5 Except as provided under GCC Clause 25, a delay by the supplier in the performance of its delivery

obligations shall render the supplier liable to the imposition of penalties, pursuant to GCC Clause 22, unless

an extension of time is agreed upon pursuant to GCC Clause 21.2 without the application of penalties.

21.6 Upon any delay beyond the delivery period in the case of a supplies contract, the purchaser shall, without

cancelling the contract, be entitled to purchase supplies of a similar quality and up to the same quantity in

substitution of the goods not supplied in conformity with the contract and to return any goods delivered later

at the supplier’s expense and risk, or to cancel the contract and buy such goods as may be required to

complete the contract and without prejudice to his other rights, be entitled to claim damages from the

supplier.

Penalties

22.1 Subject to GCC Clause 25, if the supplier fails to deliver any or all of the goods or to perform the services

within the period(s) specified in the contract, the purchaser shall, without prejudice to its other remedies

under the contract, deduct from the contract price, as a penalty, a sum calculated on the delivered price of

the delayed goods or unperformed services using the current prime interest rate calculated for each day of

the delay until actual delivery or performance. The purchaser may also consider termination of the contract

pursuant to GCC Clause 23.

Termination for default

23.1 The purchaser, without prejudice to any other remedy for breach of contract, by written notice of default

sent to the supplier, may terminate this contract in whole or in part:

a) if the supplier fails to deliver any or all of the goods within the period(s) specified in the contract, or

within any extension thereof granted by the purchaser pursuant to GCC Clause 21.2;

b) if the Supplier fails to perform any other obligation(s) under the contract; or

c) if the supplier, in the judgment of the purchaser, has engaged in corrupt or fraudulent practices in

competing for or in executing the contract.

23.2 In the event the purchaser terminates the contract in whole or in part, the purchaser may procure, upon

such terms and in such manner as it deems appropriate, goods, works or services similar to those

undelivered, and the supplier shall be liable to the purchaser for any excess costs for such similar goods,

works or services. However, the supplier shall continue performance of the contract to the extent not

terminated.

23.3 Where the purchaser terminates the contract in whole or in part, the purchaser may decide to impose a

restriction penalty on the supplier by prohibiting such supplier from doing business with the public sector for

a period not exceeding 10 years.

23.4 If a purchaser intends imposing a restriction on a supplier or any person associated with the supplier, the

supplier will be allowed a time period of not more than fourteen (14) days to provide reasons why the

envisaged restriction should not be imposed. Should the supplier fail to respond within the stipulated

fourteen (14) days the purchaser may regard the intended penalty as not objected against and may impose

it on the supplier.

23.5 Any restriction imposed on any person by the Accounting Officer / Authority will, at the discretion of the

Accounting Officer / Authority, also be applicable to any other enterprise or any partner, manager, director

or other person who wholly or partly exercises or exercised or may exercise control over the enterprise of

the first-mentioned person, and with which enterprise or person the first-mentioned person, is or was in the

opinion of the Accounting Officer / Authority actively associated.

23.6 If a restriction is imposed, the purchaser must, within five (5) working days of such imposition, furnish the

National Treasury, with the following information:

(i) the name and address of the supplier and / or person restricted by the purchaser;

(ii) the date of commencement of the restriction

(iii) the period of restriction; and

(iv) the reasons for the restriction.

These details will be loaded in the National Treasury’s central database of suppliers or persons prohibited

from doing business with the public sector.

23.7 If a court of law convicts a person of an offence as contemplated in sections 12 or 13 of the Prevention and

Combating of Corrupt Activities Act, No. , the court may also rule that such person’s name be

endorsed on the Register for Tender Defaulters. When a person’s name has been endorsed on the Register,

the person will be prohibited from doing business with the public sector for a period not less than five years

and not more than 10 years. The National Treasury is empowered to determine the period of restriction and

each case will be dealt with on its own merits. According to section 32 of the Act the Register must be open

to the public. The Register can be perused on the National Treasury website.

Anti-dumping and countervailing duties and rights

24.1 When, after the date of bid, provisional payments are required, or antidumping or countervailing duties are

imposed, or the amount of a provisional payment or anti-dumping or countervailing right is increased in

respect of any dumped or subsidized import, the State is not liable for any amount so required or imposed,

or for the amount of any such increase. When, after the said date, such a provisional payment is no longer

required or any such anti-dumping or countervailing right is abolished, or where the amount of such

provisional payment or any such right is reduced, any such favourable difference shall on demand be paid

forthwith by the contractor to the State or the State may deduct such amounts from moneys (if any) which

may otherwise be due to the contractor in regard to supplies or services which he delivered or rendered, or

is to deliver or render in terms of the contract or any other contract or any other amount which may be due

to him.

Force Majeure

25.1 Notwithstanding the provisions of GCC Clauses 22 and 23, the supplier shall not be liable for forfeiture of

its performance security, damages, or termination for default if and to the extent that his delay in

performance or other failure to perform his obligations under the contract is the result of an event of force

majeure.

25.2 If a force majeure situation arises, the supplier shall promptly notify the purchaser in writing of such condition

and the cause thereof. Unless otherwise directed by the purchaser in writing, the supplier shall continue to

perform its obligations under the contract as far as is reasonably practical, and shall seek all reasonable

alternative means for performance not prevented by the force majeure event.

Termination for insolvency

26.1 The purchaser may at any time terminate the contract by giving written notice to the supplier if the supplier

becomes bankrupt or otherwise insolvent. In this event, termination will be without compensation to the

supplier, provided that such termination will not prejudice or affect any right of action or remedy which has

accrued or will accrue thereafter to the purchaser.

Settlement of Disputes

27.1 If any dispute or difference of any kind whatsoever arises between the purchaser and the supplier in

connection with or arising out of the contract, the parties shall make every effort to resolve amicably such

dispute or difference by mutual consultation.

27.2 If, after thirty (30) days, the parties have failed to resolve their dispute or difference by such mutual

consultation, then either the purchaser or the supplier may give notice to the other party of his intention to

commence with mediation. No mediation in respect of this matter may be commenced unless such notice

is given to the other party.

27.3 Should it not be possible to settle a dispute by means of mediation, it may be settled in a South African

court of law.

27.4 Mediation proceedings shall be conducted in accordance with the rules of procedure specified in the SCC.

27.5 Notwithstanding any reference to mediation and/or court proceedings herein,

a) the parties shall continue to perform their respective obligations under the contract unless they

otherwise agree; and

b) the purchaser shall pay the supplier any monies due the supplier.

Limitation of liability

28.1 Except in cases of criminal negligence or willful misconduct, and in the case of infringement pursuant to

Clause 6;

a) the supplier shall not be liable to the purchaser, whether in contract, tort, or otherwise, for any indirect

or consequential loss or damage, loss of use, loss of production, or loss of profits or interest costs,

provided that this exclusion shall not apply to any obligation of the supplier to pay penalties and/or

damages to the purchaser; and

b) the aggregate liability of the supplier to the purchaser, whether under the contract, in tort or otherwise,

shall not exceed the total contract price, provided that this limitation shall not apply to the cost of

repairing or replacing defective equipment.

Governing language

29.1 The contract shall be written in English. All correspondence and other documents pertaining to the contract

that is exchanged by the parties shall also be written in English.

Applicable law

30.1 The contract shall be interpreted in accordance with South African laws, unless otherwise specified in SCC.

Notices

31.1 Every written acceptance of a bid shall be posted to the supplier concerned by registered or certified mail

and any other notice to him shall be posted by ordinary mail to the address furnished in his bid or to the

address notified later by him in writing and such posting shall be deemed to be proper service of such notice

31.2 The time mentioned in the contract documents for performing any act after such aforesaid notice has been

given, shall be reckoned from the date of posting of such notice.

Taxes and duties

32.1 A foreign supplier shall be entirely responsible for all taxes, stamp duties, license fees, and other such levies

imposed outside the purchaser’s country.

32.2 A local supplier shall be entirely responsible for all taxes, duties, license fees, etc., incurred until delivery of

the contracted goods to the purchaser.

32.3 No contract shall be concluded with any bidder whose tax matters are not in order. Prior to the award of a

bid the Department must be in possession of a tax clearance certificate, submitted by the bidder. This

certificate must be an original issued by the South African Revenue Services.

National Industrial Participation (NIP) Programme

33.1 The NIP Programme administered by the Department of Trade and Industry shall be applicable to all

contracts that are subject to the NIP obligation.

Prohibition of Restrictive practices

34.1 In terms of section 4 (1) (b) (iii) of the Competition Act No. , as amended, an agreement between,

or concerted practice by, firms, or a decision by an association of firms, is prohibited if it is between parties

in a horizontal relationship and if a bidder (s) is / are or a contractor(s) was / were involved in collusive

bidding (or bid rigging).

34.2 If a bidder(s) or contractor(s), based on reasonable grounds or evidence obtained by the purchaser, has /

have engaged in the restrictive practice referred to above, the purchaser may refer the matter to the

Competition Commission for investigation and possible imposition of administrative penalties as

contemplated in the Competition Act No. .

34.3 If a bidder(s) or contractor(s), has / have been found guilty by the Competition Commission of the restrictive

practice referred to above, the purchaser may, in addition and without prejudice to any other remedy

provided for, invalidate the bid(s) for such item(s) offered, and / or terminate the contract in whole or part,

and / or restrict the bidder(s) or contractor(s) from conducting business with the public sector for a period

not exceeding ten (10) years and / or claim damages from the bidder(s) or contractor(s) concerned.

Js General Conditions of Contract (revised July 2010)