Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Status: Closed — No Longer Accepting Submissions
This tender closed on 12 February 2026. Submissions are no longer accepted. The tender lifecycle continues — check the awards section for updates.
Tender Type
Request for Quotation
Delivery Location
Cnr King and Mthatha Street - Butterworth - Butterworth - 4960
Organization Type
GOVERNMENT
Published
04 Feb 2026
The mnquma local municipality is seeking a qualified provider to deliver performance‑management training to its municipal officials. Bidders must submit sealed bids using the official mbd forms by 12:00 on 13 february 2026, with all mandatory documents and certifications attached.
Continue with tenders sharing this issuer, category, or province.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
AI Document Analysis Stages
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
AI Document Analysis Stages
Review in progress
The information shown on this card is preliminary. Our procurement team is currently finalising the submission guidelines, evaluation criteria, technical specifications, financial requirements, and compliance sections so you have a clean, bid-ready summary to work from. Document being finalised: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdf. You don’t need to refresh — this page will pick up the updated review automatically.
Categories
Request for Quotation
Cnr King and Mthatha Street - Butterworth - Butterworth - 4960
Tenders in this industry often require registration with these bodies.
Recommended Certifications
Having these can improve your winning chances: CA(SA) - Chartered Accountant, PMI-PMP (Project Management Professional), Prince2 Practitioner, Six Sigma Certification
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdf
To download these documents and access AI-powered analysis, visit the main tender page.
Date & Time
Friday, 13 February 2026 - 00:00
Venue
null
This briefing session took place during the tender period.
THE SUCCESSFUL BIDDER WILL BE REQUIRED TO FILL IN AND SIGN A WRITTEN CONTRACT FORM (MBD7).
MandatoryCategory: technical
BID RESPONSE DOCUMENTS MAY BE DEPOSITED IN THE BID BOX
Category: technical
SITUATED AT (STREET ADDRESS
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
CORNER KING AND MTHATHA STREET
Category: technical
BUTTERWORTH
Category: technical
4960
Category: technical
SUPPLIER INFORMATION
Category: technical
NAME OF BIDDER
Category: technical
POSTAL ADDRESS
Category: technical
STREET ADDRESS
Category: technical
TELEPHONE NUMBER CODE NUMBER
Category: technical
CELLPHONE NUMBER
Category: technical
FACSIMILE NUMBER CODE NUMBER
Category: technical
E-MAIL ADDRESS
Category: technical
VAT REGISTRATION NUMBER
Category: technical
TAX COMPLIANCE STATUS TCS PIN: OR CSD No:
Category: technical
ARE YOU A FOREIGN
Category: technical
ARE YOU THE ACCREDITED ☐ Yes ☐ No BASED SUPPLIER FOR ☐ Yes ☐ NoREPRESENTATIVE IN SOUTH AFRICA
Category: technical
THE GOODS /SERVICES
Category: technical
FOR THE GOODS /SERVICES /WORKS
Category: technical
[IF YES ENCLOSE PROOF] /WORKS OFFERED? [IF YES, ANSWER PART B:3 ]
Category: technical
OFFERED?
Category: technical
TOTAL NUMBER OF ITEMS OFFERED TOTAL BID PRICE R
Category: technical
SIGNATURE OF BIDDER
Category: technical
.................................... DATE
Category: technical
CAPACITY UNDER WHICH THIS BID IS
Category: technical
SIGNED
Category: technical
BIDDING PROCEDURE ENQUIRIES MAY BE DIRECTED TO: TECHNICAL INFORMATION MAY BE DIRECTED TO:
Category: technical
DEPARTMENT Budget & Treasury DEPARTMENT Corporate Services
Category: technical
CONTACT PERSON Y Vava CONTACT PERSON L Rwayi
Category: technical
TELEPHONE NUMBER 047 050 1156 TELEPHONE NUMBER 047 050 1121
Category: technical
E-MAIL ADDRESS [email protected] E-MAIL ADDRESS [email protected]
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
PART B
Category: technical
TERMS AND CONDITIONS FOR BIDDING
Category: technical
1. BID SUBMISSION:
Category: technical
1.1. BIDS MUST BE DELIVERED BY THE STIPULATED TIME TO THE CORRECT ADDRESS. LATE BIDS WILL NOT BE ACCEPTED
MandatoryCategory: technical
FOR CONSIDERATION.
Category: technical
1.2. ALL BIDS MUST BE SUBMITTED ON THE OFFICIAL FORMS PROVIDED–(NOT TO BE RE-TYPED) OR ONLINE
MandatoryCategory: technical
1.3. THIS BID IS SUBJECT TO THE PREFERENTIAL PROCUREMENT POLICY FRAMEWORK ACT AND THE PREFERENTIAL
Category: technical
PROCUREMENT REGULATIONS, 2022, THE GENERAL CONDITIONS OF CONTRACT (GCC) AND, IF APPLICABLE, ANY OTHER
Category: technical
SPECIAL CONDITIONS OF CONTRACT.
Category: technical
2. TAX COMPLIANCE REQUIREMENTS
Category: technical
2.1 BIDDERS MUST ENSURE COMPLIANCE WITH THEIR TAX OBLIGATIONS.
MandatoryCategory: technical
2.2 BIDDERS ARE REQUIRED TO SUBMIT THEIR UNIQUE PERSONAL IDENTIFICATION NUMBER (PIN) ISSUED BY SARS TO
MandatoryCategory: technical
ENABLE THE ORGAN OF STATE TO VIEW THE TAXPAYER’S PROFILE AND TAX STATUS.
Category: technical
2.3 APPLICATION FOR THE TAX COMPLIANCE STATUS (TCS) CERTIFICATE OR PIN MAY ALSO BE MADE VIA E-FILING. IN ORDER
Category: technical
TO USE THIS PROVISION, TAXPAYERS WILL NEED TO REGISTER WITH SARS AS E-FILERS THROUGH THE WEBSITE
Category: technical
WWW.SARS.GOV.ZA.
Category: technical
2.4 FOREIGN SUPPLIERS MUST COMPLETE THE PRE-AWARD QUESTIONNAIRE IN PART B:3.
MandatoryCategory: technical
2.5 BIDDERS MAY ALSO SUBMIT A PRINTED TCS CERTIFICATE TOGETHER WITH THE BID.
Category: technical
2.6 IN BIDS WHERE CONSORTIA / JOINT VENTURES / SUB-CONTRACTORS ARE INVOLVED, EACH PARTY MUST SUBMIT A
MandatoryCategory: technical
SEPARATE TCS CERTIFICATE / PIN / CSD NUMBER.
Category: technical
2.7 WHERE NO TCS IS AVAILABLE BUT THE BIDDER IS REGISTERED ON THE CENTRAL SUPPLIER DATABASE (CSD), A CSD
Category: technical
NUMBER MUST BE PROVIDED.
MandatoryCategory: technical
3. QUESTIONNAIRE TO BIDDING FOREIGN SUPPLIERS
Category: technical
3.1. IS THE ENTITY A RESIDENT OF THE REPUBLIC OF SOUTH AFRICA (RSA)? ☐ YES ☐ NO
Category: technical
3.2. DOES THE ENTITY HAVE A BRANCH IN THE RSA? ☐ YES ☐ NO
Category: technical
3.3. DOES THE ENTITY HAVE A PERMANENT ESTABLISHMENT IN THE RSA? ☐ YES ☐ NO
Category: technical
3.4. DOES THE ENTITY HAVE ANY SOURCE OF INCOME IN THE RSA? ☐ YES ☐ NO
Category: technical
3.5. IS THE ENTITY LIABLE IN THE RSA FOR ANY FORM OF TAXATION? ☐ YES ☐ NO
Category: technical
IF THE ANSWER IS “NO” TO ALL OF THE ABOVE, THEN IT IS NOT A REQUIREMENT TO REGISTER FOR A TAX COMPLIANCE
Category: technical
STATUS SYSTEM PIN CODE FROM THE SOUTH AFRICAN REVENUE SERVICE (SARS) AND IF NOT REGISTER AS PER 2.3 ABOVE.
Category: technical
NB: FAILURE TO PROVIDE ANY OF THE ABOVE PARTICULARS MAY RENDER THE BID INVALID.
Category: technical
NO BIDS WILL BE CONSIDERED FROM PERSONS IN THE SERVICE OF THE STATE.
Category: technical
SIGNATURE OF BIDDER: ...................................................
Category: technical
CAPACITY UNDER WHICH THIS BID IS SIGNED: ...................................................
Category: technical
DATE: ...................................................
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 2
Category: technical
1. TAX CLEARANCE CERTFICATE REQUIREMENTS
Category: technical
It is a condition of bid that the taxes of the successful bidder must be in order, or that satisfactory arrangements have
MandatoryCategory: technical
been made with South African Revenue Service (SARS) to meet the bidder’s tax obligations.
Category: technical
1. In order to meet this requirement bidders are required to complete in full the attached form TCC 001“Application
MandatoryCategory: technical
for a Tax Clearance Certificate” and submit it to any SARS branch office nationally. The Tax Clearance
Category: technical
Certificate Requirements are also applicable to foreign bidders / individuals who wish to submit bids.
Category: technical
2. SARS will then furnish the bidder with a Tax Clearance Certificate that will be valid for a period of 1 (one) year
Category: technical
from the date of approval.
Category: technical
3. The original Tax Clearance Certificate must be submitted together with the bid. Failure to submit the original
MandatoryCategory: technical
and valid Tax Clearance Certificate will result in the invalidation of the bid. Certified copies of the Tax Clearance
Category: technical
Certificate will not be acceptable.
Category: technical
4. In bids where Consortia / Joint Ventures / Sub-contractors are involved, each party must submit a separate Tax
MandatoryCategory: technical
Clearance Certificate.
Category: technical
5. Copies of the TCC 001 “Application for a Tax Clearance Certificate” form are available from any SARS branch
Category: technical
office nationally or on the website www.sars.gov.za.
Category: technical
6. Applications for the Tax Clearance Certificates may also be made via eFiling. In order to use this provision,
Category: technical
taxpayers will need to register with SARS as eFilers through the website www.sars.gov.za.
Category: technical
2.1 SARS APPLICATION FOR TCC MBD
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 3.1
Category: technical
2. PRICING SCHEDULE – FIRM PRICES
Category: technical
(PURCHASES)
Category: technical
NOTE: ONLY FIRM PRICES WILL BE ACCEPTED. NON-FIRM PRICES (INCLUDING PRICES SUBJECT
Category: technical
TO RATES OF EXCHANGE VARIATIONS) WILL NOT BE CONSIDERED
Category: technical
IN CASES WHERE DIFFERENT DELIVERY POINTS INFLUENCE THE PRICING, A SEPARATE
Category: technical
PRICING SCHEDULE MUST BE SUBMITTED FOR EACH DELIVERY POINT
MandatoryCategory: technical
Name of Bidder.......................................... Bid Number........................
Category: technical
Closing Time 12:00 Closing Date: 13/02/2026
Category: technical
OFFER TO BE VALID FOR 90 DAYS FROM THE CLOSING DATE OF BID.
Category: technical
__________________________________________________________________________
Category: technical
ITEM QUANTITY DESCRIPTION BID PRICE IN RSA CURRENCY
Category: technical
NO. **(ALL APPLICABLE TAXES INCLUDED)
Category: technical
- Required by: Mnquma Local Municipality
MandatoryCategory: technical
- At: Corner King & Mtata Street
Category: technical
Butterworth, 4960
Category: technical
- Brand and Model ........................................
Category: technical
- Country of Origin South Africa
Category: technical
NB: PLEASE MARK THE APPLICABLE ANSWER
Category: technical
- Does the offer comply with the specification(s)? *YES/NO
Category: technical
- If not to specification, indicate deviation(s) ........................................
Category: technical
- Period required for delivery ........................................
MandatoryCategory: technical
*Delivery: Firm/Not firm
Category: technical
- Delivery basis ...........................................
Category: technical
Note: All delivery costs must be included in the bid price, for delivery at the prescribed destination.
MandatoryCategory: technical
** “all applicable taxes” includes value- added tax, pay as you earn, income tax, unemployment insurance
Category: technical
fund contributions and skills development levies.
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 3.3
Category: technical
3.1 PRICING SCHEDULE AND SPECIFICATION
Category: technical
(SECTION 2)
Category: technical
Pricing Instructions:
Category: technical
1. All prices shall be tendered including VAT, customs or excise duty and any other duty, levy, or other applicable
Category: technical
tax.
Category: technical
2. All prices shall be tendered in accordance with the units specified in this schedule.
Category: technical
3. All prices tendered must include all expenses, disbursements and costs (e.g. transport, overheads, accommodation
MandatoryCategory: technical
etc.) that may be required in and for the execution of the work described in the Specification, and shall cover the
MandatoryCategory: technical
cost of all general risks, liabilities and obligations set forth or implied in the Contract as well as overhead charges
Category: technical
and profit (in the event that the tender is successful). All prices tendered will be final and binding.
Category: technical
4. Bidders must also indicate the expected delivery date.
MandatoryCategory: technical
TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT
Category: technical
Description/ Course Duration Quantity Unit Price Total
Category: technical
116341 40
Category: technical
or any relevant US
Category: technical
Additional Cost
Category: technical
Total
Category: technical
Vat @15 %
Category: technical
Grand Total
Category: technical
See attached annexure A for a Detailed Specification (-42)
Category: technical
STRICT DELIVERY DATES WILL BE OBSERVED AND PENALTIES WILL BE IMPOSED FOR LATE DELIVERIES.
Category: technical
BIDDERS MUST TAKE SPECIAL NOTE OF SECTION 22.1 OF THE GENERAL CONDITIONS IN THE TENDER
MandatoryCategory: technical
DOCUMENT
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
2.2 TENDER OFFER
Category: technical
I, (duly
Category: technical
authorized to represent the tenderer for the purpose of this tender), hereby tender to supply all or any of the
Category: technical
goods and/or render all or any of the services described in the attached document to the Mnquma Local
Category: technical
Municipality on the terms and conditions stipulated in this tender document and in accordance with the
Category: technical
specification stipulated in the tender document at the prices reflected in the Contract Form/Price Schedule.
Category: technical
BIDDERS TOTAL OFFER (Inclusive of vat and all other charges)
Category: technical
R...........................................................................................................................
Category: technical
The tenderer agrees that:
Category: technical
3.1 The tender offer submitted shall remain valid, irrevocable and open for written acceptance by the
Category: technical
Mnquma Local Municipality for a period of 90 days from the closing date or for such extended period
Category: technical
as may be applicable;
Category: technical
3.2 The tender offer will not be withdrawn or amended during the aforesaid validity period;
Category: technical
3.3 Notwithstanding the above, the tenderer may submit a written request to the Mnquma Local
Category: technical
Municipality after the closing date for permission to withdraw the tender offer. Such withdrawal will
Category: technical
be permitted or refused at the sole discretion of the Mnquma Local Municipality after consideration
Category: technical
of the reasons for the withdrawal, which shall be fully set out by the tenderer in the written request
Category: technical
for withdrawal;
Category: technical
3.4 Should the tender offer be withdrawn in contravention of 3.1 to 3.3 above, the tenderer agrees that:
Category: technical
(a) it shall be liable to the Mnquma Local Municipality for any additional expense incurred by the
Category: technical
Mnquma Local Municipality in having either to accept another tender or, if new tenders have to
Category: technical
be invited, the additional expenses incurred by the invitation of new tenders and the subsequent
Category: technical
acceptance of any other tender;
Category: technical
(b) the Mnquma Local Municipality shall also have the right to recover such additional expenses by
Category: technical
set-off against moneys which may be due or become due to the tenderer under this or any other
Category: technical
tender or contract or against any guarantee or deposit that may have been furnished by the
Category: technical
tenderer or on its behalf for the due fulfilment of this or any other tender or contract. Pending the
Category: technical
ascertainment of the amount of such additional expenses, the Mnquma Local Municipality shall
Category: technical
be entitled to retain such moneys, guarantee or deposit as security for any loss the Mnquma Local
Category: technical
Municipality may suffer due to such withdrawal.
Category: technical
3.5 The tenderer agrees that this tender and its acceptance shall be subject to the terms and
Category: technical
conditions contained in the Mnquma Local Municipality’s Supply Chain Management Policy (‘SCM
Category: technical
Policy’) and Combating of Abuse of the Supply Chain Management System Policy (‘Abuse Policy’).
Category: technical
Signature(s)
Category: technical
Print name(s):
Category: technical
On behalf of the tenderer (duly authorized)
Category: technical
Date
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 4
Category: technical
3. DECLARATION OF INTEREST
Category: technical
1. No bid will be accepted from persons in the service of the state1.
Category: technical
2. Any person, having a kinship with persons in the service of the state, including a blood relationship, may make
Category: technical
an offer or offers in terms of this invitation to bid. In view of possible allegations of favouritism, should the resulting
Category: technical
bid, or part thereof, be awarded to persons connected with or related to persons in service of the state, it is
Category: technical
required that the bidder or their authorised representative declare their position in relation to the
MandatoryCategory: technical
evaluating/adjudicating authority.
Category: technical
3. In order to give effect to the above, the following questionnaire must be completed and submitted with the bid.
MandatoryCategory: technical
3.1 Full Name of bidder or his or her representative:.....................................................
Category: technical
3.2 Identity Number: ..............................................................................................
Category: technical
3.3 Position occupied in the Company (director, trustee, shareholder2):.............................
Category: technical
3.4 Company Registration Number: .........................................................................
Category: technical
3.5 Tax Reference Number:....................................................................................
Category: technical
3.6 VAT Registration Number: ..............................................................................
Category: technical
3.7 The names of all directors / trustees / shareholders members, their individual identity numbers and state
Category: technical
employee numbers must be indicated in paragraph 4 below.
MandatoryCategory: technical
NB: PLEASE MARK THE APPLICABLE ANSWER
Category: technical
3.8 Are you presently in the service of the state? YES / NO
Category: technical
3.8.1 If yes, furnish particulars. .........................................................................
Category: technical
...........................................................................................................
Category: technical
1MSCM Regulations: “in the service of the state” means to be –
Category: technical
(a) a member of –
Category: technical
(i) any municipal council;
Category: technical
(ii) any provincial legislature; or
Category: technical
(iii) the national Assembly or the national Council of provinces;
Category: technical
(b) a member of the board of directors of any municipal entity;
Category: technical
(c) an official of any municipality or municipal entity;
Category: technical
(d) an employee of any national or provincial department, national or provincial public entity or constitutional
Category: technical
institution within the meaning of the Public Finance Management Act, 1999 (Act No.);
Category: technical
(e) a member of the accounting authority of any national or provincial public entity; or
Category: technical
(f) An employee of Parliament or a provincial legislature.
Category: technical
2 Shareholder” means a person who owns shares in the company and is actively involved in the management of the
Category: technical
company or business and exercises control over the company.
Category: technical
3.9 Have you been in the service of the state for the past twelve months? ......... YES / NO
Category: technical
3.9.1 If yes, furnish particulars...........................................................................
Category: technical
..........................................................................................................
Category: technical
3.10 Do you have any relationship (family, friend, other) with persons in the service of the state and who may
Category: technical
be involved with the evaluation and or adjudication of this bid? ....................................... YES / NO
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
3.10.1 If yes, furnish particulars.
Category: technical
..........................................................................................
Category: technical
..........................................................................................
Category: technical
3.11 Are you, aware of any relationship (family, friend, other) between any other bidder and any persons in
Category: technical
the service of the state who may be involved with the evaluation and or adjudication of this bid?
Category: technical
YES / NO
Category: technical
3.11.1 If yes, furnish particulars
Category: technical
.............................................................................................
Category: technical
.......................................................................................................
Category: technical
3.12 Are any of the company’s directors, trustees, managers,
Category: technical
principle shareholders or stakeholders in service of the state? YES / NO
Category: technical
3.12.1 If yes, furnish particulars.
Category: technical
...........................................................................................
Category: technical
...........................................................................................
Category: technical
3.13 Are any spouse, child or parent of the company’s director’s trustees, managers, principle shareholders or
Category: technical
stakeholders in service of the state? YES / NO
Category: technical
3.13.1 If yes, furnish particulars.
Category: technical
...........................................................................................
Category: technical
...........................................................................................
Category: technical
3.14 Do you or any of the directors, trustees, managers, principle shareholders, or stakeholders of this
Category: technical
company have any interest in any other related companies or business whether or not they are bidding
Category: technical
for this contract? YES / NO
Category: technical
3.14.1 If yes, furnish particulars:
Category: technical
.........................................................................................
Category: technical
4. Full details of directors / trustees / members / shareholders.
Category: technical
Full Name Identity Number State Employee Number
Category: technical
......................................... ............................................
Category: technical
Signature Date
Category: technical
........................................ .............................................
Category: technical
Capacity Name of Bidder
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 6.1
Category: technical
PREFERENCE POINTS CLAIM FORM IN TERMS OF THE PREFERENTIAL
Category: technical
PROCUREMENT REGULATIONS 2022
Category: technical
This preference form must form part of all bids invited. It contains general information and serves as a claim form for
MandatoryCategory: technical
preference points for specific goals.
Category: technical
NB: BEFORE COMPLETING THIS FORM, BIDDERS MUST STUDY THE GENERAL CONDITIONS, DEFINITIONS
MandatoryCategory: technical
AND DIRECTIVES APPLICABLE IN RESPECT OF SPECIFIC GOALS, AS PRESCRIBED IN THE
Category: technical
PREFERENTIAL PROCUREMENT REGULATIONS, 2022.
Category: technical
1. GENERAL CONDITIONS
Category: technical
1.1 The following preference point systems are applicable to all bids:
Category: technical
- the 80/20 system for requirements with a Rand value of up to R50 000 000 (all applicable taxes
Category: technical
included); and
Category: technical
- the 90/10 system for requirements with a Rand value above R50 000 000 (all applicable taxes
Category: technical
included).
Category: technical
1.2 The value of this bid is estimated not to exceed R50 000 000 (all applicable taxes included) and
Category: technical
therefore the 80/20 preference point system shall be applicable.
Category: technical
1.3 Preference points for this bid shall be awarded for:
Category: technical
(a) Price; and
Category: technical
(b) Specific goals
Category: technical
1.4 The maximum points for this bid are allocated as follows:
Category: technical
POINTS
Category: technical
PRICE 80
Category: technical
SPECIFIC GOALS OF CONTRIBUTION 20
Category: technical
Total points for Price and Specific Goals must not 100
MandatoryCategory: technical
exceed
Category: technical
1.5 Failure of a bidder to submit proof of specific goals claimed will be interpreted to mean that preference
Category: technical
points for specific goals are not claimed.
Category: technical
1.6 The purchaser reserves the right to require of a bidder, either before a bid is adjudicated or at any
Category: technical
time subsequently, to substantiate any claim in regard to preferences, in any manner required by the
MandatoryCategory: technical
purchaser.
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
2. DEFINITIONS
Category: technical
(a) “all applicable taxes” includes value-added tax, pay as you earn, income tax, unemployment insurance
Category: technical
fund contributions and skills development levies;
Category: technical
(b) “bid” means a written offer in the form determined by an organ of state in response to an invitation to
Category: technical
provide goods or services through price quotations, competitive tendering process or any other method
Category: technical
envisaged in legislation and “bid” has a corresponding meaning
Category: technical
(c) “comparative price” means the price after the factors of a non-firm price and all unconditional discounts
Category: technical
that can be utilized have been taken into consideration;
Category: technical
(d) “consortium or joint venture” means an association of persons for the purpose of combining their
Category: technical
expertise, property, capital, efforts, skill and knowledge in an activity for the execution of a contract;
Category: technical
(e) “contract” means the agreement that results from the acceptance of a bid by an organ of state;
Category: technical
(f) “EME” means an Exempted Micro Enterprise as defines by Codes of Good Practice issued in terms of
Category: technical
section 9 (1) of the Broad-Based Black Economic Empowerment Act, 2003 (Act No. );
Category: technical
(g) “Firm price” means the price that is only subject to adjustments in accordance with the actual increase
Category: technical
or decrease resulting from the change, imposition, or abolition of customs or excise duty and any other
Category: technical
duty, levy, or tax, which, in terms of the law or regulation, is binding on the contractor and demonstrably
Category: technical
has an influence on the price of any supplies, or the rendering costs of any service, for the execution of
Category: technical
the contract;
Category: technical
(h) “non-firm prices” means all prices other than “firm” prices;
Category: technical
(i) “person” includes a juristic person;
Category: technical
(j) “QSE” means a Qualifying Small Enterprise as defines by Codes of Good Practice issued in terms of
Category: technical
section 9 (1) of the Broad-Based Black Economic Empowerment Act, 2003 ( Act No. );
Category: technical
(k) “rand value” means the total estimated value of a contract in Rand, calculated at the time of the tender
Category: technical
invitation;
Category: technical
(l) “Reconstruction and Development Programme” the Reconstruction and Development Programme as
Category: technical
published in Government Gazette No. 16085 dated 23 November 1994;
Category: technical
(m) “specific goals” means specific goals as contemplated in section 2(1)(d) of the Act which may include
Category: technical
contracting with persons, or categories of persons, historically disadvantaged by unfair discrimination on
Category: technical
the basis of race, gender and disability including the implementation of programmes of the Reconstruction
Category: technical
and Development Programme as published in Government Gazette No. 16085 dated 23 November 1994;
Category: technical
(n) “total revenue” bears the same meaning assigned to this expression in the Codes of Good Practice;
Category: technical
(o) “trust” means the arrangement through which the property of one person is made over or bequeathed
Category: technical
to a trustee to administer such property for the benefit of another person; and
Category: technical
(p) “trustee” means any person, including the founder of a trust, to whom property is bequeathed in order
Category: technical
for such property to be administered for the benefit of another person.
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
(q) “Disability” means, in respect of a person, a permanent impairment of a physical, intellectual, or sensory
Category: technical
function, which results in restricted, or lack of, ability to perform an activity in the manner, or within the
Category: technical
range, considered normal for a human being.
Category: technical
(r) “tender for income-generating contracts” means a written offer in the form determined by an organ of
Category: technical
state in response to an invitation for the origination of income-generating contracts through any method
Category: technical
envisaged in legislation that will result in a legal agreement between the organ of state and a third party
Category: technical
that produces revenue for the organ of state, and includes, but is not limited to, leasing and disposal of
Category: technical
assets and concession contracts, excluding direct sales and disposal of assets through public auctions.
Category: technical
3. ADJUDICATION USING A POINT SYSTEM
Category: technical
3.1 If two or more tenderers score an equal total number of points, the contract must be awarded to the tenderer that
MandatoryCategory: technical
scored the highest points for specific goals.
Category: technical
3.2 Preference points shall be calculated after prices have been brought to a comparative basis taking into account
Category: technical
all factors of non-firm prices and all unconditional discounts;
Category: technical
3.3 Points scored must be rounded off to the nearest 2 decimal places.
MandatoryCategory: technical
3.4 In the event that two or more bids have scored equal total points, the successful bid must be the one scoring the
MandatoryCategory: technical
highest number of preference points for specific goals.
Category: technical
3.5 If two or more tenderers score equal total points in all respects, the award must be decided by the drawing of
MandatoryCategory: technical
lots.
Category: technical
4. POINTS AWARDED FOR PRICE
Category: technical
4.1 THE 80/20 OR 90/10 PREFERENCE POINT SYSTEMS
Category: technical
A maximum of 80 or 90 points is allocated for price on the following basis:
Category: technical
80/20 or 90/10
Category: technical
Ps = 80{1- Pt-Pmin} or Ps = 90{1-Pt-Pmin}
Category: technical
Pmin Pmin
Category: technical
Where
Category: technical
Ps = Points scored for comparative price of bid under consideration
Category: technical
Pt = Comparative price of bid under consideration
Category: technical
Pmin = Comparative price of lowest acceptable bid
Category: technical
5. POINTS AWARDED FOR LEVEL OF CONTRIBUTION TOWARDS SPECIFIC GOALS
Category: technical
5.1 In terms of s2(b)(i) and (ii) of the Preferential Procurement Regulations Policy Framework Act, a preference
Category: technical
points system must be followed for contracts with a Rand value above a prescribed amount a maximum of
MandatoryCategory: technical
10 or 20 points may be allocated for specific goals as contemplated in s2(d) of the Act provided that the
Category: technical
lowest acceptable tender scores 90 or 80 points for price, respectively, in accordance with the table below:
Category: technical
Table 1: Specific goals for the tender and points claimed are indicated per the table below.
Category: technical
(Note to organs of state: Where either the 90/10 or 80/20 preference point system is applicable, corresponding
Category: technical
points must also be indicated as such.
MandatoryCategory: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
Note to tenderers: The tenderer must indicate how they claim points for each preference point system.)
MandatoryCategory: technical
80/20 preference point system
Category: technical
Specific Goals Points Proof required to Number of points
MandatoryCategory: technical
(20 points) Claim Claimed
Category: technical
The specific goals allocated
Category: technical
(To be completed by the (20 points) (20 points) points in terms of this tender
Category: technical
Municipality (To be completed by the (To be completed by the
Category: technical
Municipality) tenderer)
Category: technical
The promotion of South African 20 Fully completed and
Category: technical
owned enterprise signed MBD 6.1 and Full
Category: technical
Central Suppliers Data
Category: technical
Base report (CSD) not
Category: technical
older than one month
Category: technical
90/10 preference point system
Category: technical
The specific goals Specific Goals Points Proof required to Number of points
MandatoryCategory: technical
allocated points in terms
Category: technical
of this tender (10 points) Claim Claimed
Category: technical
(To be completed by the (10 points) (10 points)
Category: technical
Municipality) (To be completed by the (To be completed by the
Category: technical
Municipality) Tenderer)
Category: technical
5.2 Bidders must submit valid proof for specific goals
MandatoryCategory: technical
5.3 If the municipality is of the view that a tenderer submitted false information regarding a specific goal, will —
Category: technical
(a) inform the tenderer accordingly; and
Category: technical
(b) give the tenderer an opportunity to make representations within 14 days as to why the tender may not be
Category: technical
disqualified or, if the tender has already been awarded to the tenderer, the contract should not be
Category: technical
terminated in whole or in part.
Category: technical
5.4 After considering the representations referred to in sub regulation (1)(b), the municipality may, if concludes that
Category: technical
such information is false—
Category: technical
(a) disqualify the tenderer or terminate the contract in whole or in part; and
Category: technical
(b) if applicable, claim damages from the tenderer.
Category: technical
6. SPECIFIC GOALS CLAIMED IN TERMS OF PARAGRAPHS 1.4 AND 5.1
Category: technical
Specific goals: = (maximum of 10 or 20 points)
Category: technical
(Points claimed in respect of paragraph 7.1 must be in accordance with the table reflected in paragraph
MandatoryCategory: technical
5.1 and must be substantiated by means of the required proof of specific goals.
MandatoryCategory: technical
7. SUB-CONTRACTING
Category: technical
7.1 Will any portion of the contract be sub-contracted?
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
(Tick applicable box)
Category: technical
YES NO
Category: technical
7.1.1 If yes, indicate:
Category: technical
i) What percentage of the contract will be subcontracted......................................%
Category: technical
ii) The name of the sub-contractor....................................................................
Category: technical
iii) Whether the sub-contractor is an EME.
Category: technical
(Tick applicable box)
Category: technical
YES NO
Category: technical
8. DECLARATION WITH REGARD TO COMPANY/FIRM
Category: technical
8.1 Name of company/firm:........................................................................................
Category: technical
8.2 VAT registration number:.....................................................................................
Category: technical
8.3 Company registration number:..............................................................................
Category: technical
8.4 TYPE OF COMPANY/ FIRM
Category: technical
Partnership/Joint Venture / Consortium
Category: technical
One person business/sole propriety
Category: technical
Close corporation
Category: technical
Company
Category: technical
(Pty) Limited
Category: technical
[TICK APPLICABLE BOX]
Category: technical
8.5 DESCRIBE PRINCIPAL BUSINESS ACTIVITIES
Category: technical
..............................................................................................................
Category: technical
8.6 COMPANY CLASSIFICATION
Category: technical
Manufacturer
Category: technical
Supplier
Category: technical
Professional service provider
Category: technical
Other service providers, e.g. transporter, etc.
Category: technical
[TICK APPLICABLE BOX]
Category: technical
8.7 MUNICIPAL INFORMATION
Category: technical
Municipality where business is situated: ...........................................................
Category: technical
Registered Account Number: ...............................
Category: technical
Stand Number: .......................................................
Category: technical
8.8 Total number of years the company/firm has been in business: .................................
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
8.9 I/we, the undersigned, who is / are duly authorised to do so on behalf of the company/firm, certify that the points
Category: technical
claimed, based on the specific goal declared in paragraph 6 , indicated in paragraph 7, qualifies the
Category: technical
company/ firm for the preference(s) shown and I / we acknowledge that:
Category: technical
i) The information furnished is true and correct;
Category: technical
ii) The preference points claimed are in accordance with the General Conditions as indicated in
Category: technical
paragraph 1 of this form;
Category: technical
iii) In the event of a contract being awarded as a result of points claimed as shown in paragraph 7, the
Category: technical
contractor may be required to furnish documentary proof to the satisfaction of the purchaser that the
MandatoryCategory: technical
claims are correct;
Category: technical
iv) If the specific goals have been claimed or obtained on a fraudulent basis or any of the conditions of
Category: technical
contract have not been fulfilled, the purchaser may, in addition to any other remedy it may have –
Category: technical
(a) disqualify the person from the bidding process;
Category: technical
(b) recover costs, losses or damages it has incurred or suffered as a result of that person’s
Category: technical
conduct;
Category: technical
(c) cancel the contract and claim any damages which it has suffered as a result of having to
Category: technical
make less favourable arrangements due to such cancellation;
Category: technical
(d) restrict the bidder or contractor, its shareholders and directors, or only the shareholders and
Category: technical
directors who acted on a fraudulent basis, from obtaining business from any organ of state
Category: technical
for a period not exceeding 10 years, after the audi alteram partem (hear the other side) rule
Category: technical
has been applied; and
Category: technical
(e) forward the matter for criminal prosecution.
Category: technical
WITNESSES
Category: technical
..............................................
Category: technical
1. ............................................ SIGNATURE(S) OF BIDDERS(S)
Category: technical
2. ........................................... DATE: .........................................
Category: technical
ADDRESS .........................................
Category: technical
.........................................
Category: technical
.........................................
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 7.1
Category: technical
CONTRACT FORM - PURCHASE OF GOODS/WORKS
Category: technical
THIS FORM MUST BE FILLED IN DUPLICATE BY BOTH THE SUCCESSFUL BIDDER (PART 1) AND THE
MandatoryCategory: technical
PURCHASER (PART 2). BOTH FORMS MUST BE SIGNED IN THE ORIGINAL SO THAT THE SUCCESSFUL
MandatoryCategory: technical
BIDDER AND THE PURCHASER WOULD BE IN POSSESSION OF ORIGINALLY SIGNED CONTRACTS FOR
Category: technical
THEIR RESPECTIVE RECORDS.
Category: technical
PART 1 (TO BE FILLED IN BY THE BIDDER)
Category: technical
1. I hereby undertake to supply all or any of the goods and/or works described in the attached bidding documents
Category: technical
to (name of institution).......................................... in accordance with the requirements and specifications
Category: technical
stipulated in bid number...................... at the price/s quoted. My offer/s remain binding upon me and open
Category: technical
for acceptance by the purchaser during the validity period indicated and calculated from the closing time of bid.
Category: technical
2. The following documents shall be deemed to form and be read and construed as part of this agreement:
Category: technical
(i) Bidding documents, viz
Category: technical
- Invitation to bid;
Category: technical
- Tax clearance certificate;
Category: technical
- Pricing schedule(s);
Category: technical
- Technical Specification(s);
Category: technical
- Preference claims for specific goals in terms of the Preferential Procurement Regulations 2022
Category: technical
- Declaration of interest;
Category: technical
- Declaration of bidder’s past SCM practices;
Category: technical
- Certificate of Independent Bid Determination;
Category: technical
- Special Conditions of Contract;
Category: technical
(ii) General Conditions of Contract; and
Category: technical
(iii) Other (specify)
Category: technical
3. I confirm that I have satisfied myself as to the correctness and validity of my bid; that the price(s) and rate(s)
Category: technical
quoted cover all the goods and/or works specified in the bidding documents; that the price(s) and rate(s) cover
Category: technical
all my obligations and I accept that any mistakes regarding price(s) and rate(s) and calculations will be at my
Category: technical
own risk.
Category: technical
4. I accept full responsibility for the proper execution and fulfilment of all obligations and conditions devolving on
Category: technical
me under this agreement as the principal liable for the due fulfilment of this contract.
Category: technical
5. I declare that I have no participation in any collusive practices with any bidder or any other person regarding
Category: technical
this or any other bid.
Category: technical
6. I confirm that I am duly authorised to sign this contract.
Category: technical
NAME (PRINT) .................................................
Category: technical
WITNESSES
Category: technical
CAPACITY .................................................
Category: technical
SIGNATURE ................................................. 1 ........................
Category: technical
NAME OF FIRM ................................................. ........................
Category: technical
DATE .................................................
Category: technical
DATE: .........................
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 7.1
Category: technical
CONTRACT FORM - PURCHASE OF GOODS/WORKS
Category: technical
PART 2 (TO BE FILLED IN BY THE PURCHASER)
Category: technical
1. I............................................. in my capacity as...............................................
Category: technical
accept your bid under reference number ..................dated...........................for the supply of goods/works
Category: technical
indicated hereunder and/or further specified in the annexure(s).
Category: technical
2. An official order indicating delivery instructions is forthcoming.
Category: technical
3. I undertake to make payment for the goods/works delivered in accordance with the terms and conditions of the
Category: technical
contract, within 30 (thirty) days after receipt of an invoice accompanied by the delivery note.
Category: technical
PRICE (ALL
Category: technical
ITEM SPECIFIC GOALS
Category: technical
APPLICABLE BRAND DELIVERY PERIOD
Category: technical
NO. CLAIMED
Category: technical
TAXES INCLUDED)
Category: technical
4. I confirm that I am duly authorized to sign this contract.
Category: technical
SIGNED AT .............................................ON......................................
Category: technical
NAME (PRINT) ...........................................
Category: technical
SIGNATURE ...........................................
Category: technical
OFFICIAL STAMP WITNESSES
Category: technical
............................
Category: technical
............................
Category: technical
DATE ............................
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 8
Category: technical
8. DECLARATION OF BIDDER’S PAST SUPPLY CHAIN MANAGEMENT PRACTICES
Category: technical
1 This Municipal Bidding Document must form part of all bids invited.
MandatoryCategory: technical
2 It serves as a declaration to be used by municipalities and municipal entities in ensuring that when goods
Category: technical
and services are being procured, all reasonable steps are taken to combat the abuse of the supply chain
Category: technical
management system.
Category: technical
3 The bid of any bidder may be rejected if that bidder, or any of its directors have:
Category: technical
a. abused the municipality’s / municipal entity’s supply chain management system or committed any
Category: technical
improper conduct in relation to such system;
Category: technical
b. been convicted for fraud or corruption during the past five years;
Category: technical
c. willfully neglected, reneged on or failed to comply with any government, municipal or other public sector
Category: technical
contract during the past five years; or
Category: technical
d. been listed in the Register for Tender Defaulters in terms of section 29 of the Prevention and Combating
Category: technical
of Corrupt Activities Act (No ).
Category: technical
4 In order to give effect to the above, the following questionnaire must be completed and submitted
MandatoryCategory: technical
with the bid.
Category: technical
Item Question Yes No
Category: technical
4.1 Is the bidder or any of its directors listed on the National Treasury’s Database of Yes No
Category: technical
Restricted Suppliers as companies or persons prohibited from doing business with the ☐ ☐
Category: technical
public sector?
Category: technical
(Companies or persons who are listed on this Database were informed in writing of this
Category: technical
restriction by the Accounting Officer/Authority of the institution that imposed the
Category: technical
restriction after the audi alteram partem rule was applied).
Category: technical
The Database of Restricted Suppliers now resides on the National Treasury’s
Category: technical
website (www.treasury.gov.za) and can be accessed by clicking on its link at the
Category: technical
bottom of the home page.
Category: technical
4.1. If so, furnish particulars:
Category: technical
4.2 Is the bidder or any of its directors listed on the Register for Tender Defaulters in terms Yes No
Category: technical
of section 29 of the Prevention and Combating of Corrupt Activities Act (No 12 of ☐ ☐
Category: technical
2004)?
Category: technical
The Register for Tender Defaulters can be accessed on the National Treasury’s
Category: technical
website (www.treasury.gov.za) by clicking on its link at the bottom of the home
Category: technical
page.
Category: technical
4.2. If so, furnish particulars:
Category: technical
4.3 Was the bidder or any of its directors convicted by a court of law (including a court of Yes No
Category: technical
law outside the Republic of South Africa) for fraud or corruption during the past five ☐ ☐
Category: technical
years?
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
4.3. If so, furnish particulars:
Category: technical
Item Question Yes No
Category: technical
4.4 Does the bidder or any of its directors owe any municipal rates and taxes or municipal Yes No
Category: technical
charges to the municipality, or to any other municipality, that is in arrears for more ☐ ☐
Category: technical
than three months?
Category: technical
4.4. If so, furnish particulars:
Category: technical
4.5 Was any contract between the bidder and the municipality or any other organ of state Yes No
Category: technical
terminated during the past five years on account of failure to perform on or comply with ☐ ☐
Category: technical
the contract?
Category: technical
4.7. If so, furnish particulars:
Category: technical
CERTIFICATION
Category: technical
I, THE UNDERSIGNED (FULL NAME) .......................................................
Category: technical
CERTIFY THAT THE INFORMATION FURNISHED ON THIS DECLARATION FORM TRUE AND CORRECT.
Category: technical
I ACCEPT THAT, IN ADDITION TO CANCELLATION OF A CONTRACT, ACTION MAY BE TAKEN AGAINST ME
Category: technical
SHOULD THIS DECLARATION PROVE TO BE FALSE.
Category: technical
................................................ ................................
Category: technical
Signature Date
Category: technical
.............................................. ................................
Category: technical
Position Name of Bidder
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
MBD 9
Category: technical
CERTIFICATE OF INDEPENDENT BID DETERMINATION
Category: technical
I, the undersigned, in submitting the accompanying bid:
Category: technical
________________________________________________________________________
Category: technical
(Bid Number and Description)
Category: technical
in response to the invitation for the bid made by:
Category: technical
________________________________________________________________________
Category: technical
(MnqumaLocal Municipality)
Category: technical
do hereby make the following statements that I certify to be true and complete in every respect:
Category: technical
I certify, on behalf of:___________________________________________________that:
Category: technical
(Name of Bidder)
Category: technical
1. I have read and I understand the contents of this Certificate;
Category: technical
2. I understand that the accompanying bid will be disqualified if this Certificate is found not to be true and
Category: technical
complete in every respect;
Category: technical
3. I am authorized by the bidder to sign this Certificate, and to submit the accompanying bid, on behalf of the
Category: technical
bidder;
Category: technical
4. Each person whose signature appears on the accompanying bid has been authorized by the bidder to
Category: technical
determine the terms of, and to sign, the bid, on behalf of the bidder;
Category: technical
5. For the purposes of this Certificate and the accompanying bid, I understand that the word “competitor” shall
Category: technical
include any individual or organization, other than the bidder, whether or not affiliated with the bidder, who:
Category: technical
(a) has been requested to submit a bid in response to this bid invitation;
Category: technical
(b) could potentially submit a bid in response to this bid invitation, based on their qualifications,
Category: technical
abilities or experience; and
Category: technical
(c) provides the same goods and services as the bidder and/or is in the same line of business as
Category: technical
the bidder.
Category: technical
6. The bidder has arrived at the accompanying bid independently from, and without consultation,
Category: technical
communication, agreement or arrangement with any competitor. However communication between
Category: technical
partners in a joint venture or consortium3 will not be construed as collusive bidding.
Category: technical
7. In particular, without limiting the generality of paragraphs 6 above, there has been no consultation,
Category: technical
communication, agreement or arrangement with any competitor regarding:
Category: technical
(a) prices;
Category: technical
(b) geographical area where product or service will be rendered (market allocation)
Category: technical
(c) methods, factors or formulas used to calculate prices;
Category: technical
(d) the intention or decision to submit or not to submit, a bid;
Category: technical
(e) the submission of a bid which does not meet the specifications and conditions of the bid; or
Category: technical
(f) bidding with the intention not to win the bid.
Category: technical
8. In addition, there have been no consultations, communications, agreements or arrangements with any
Category: technical
competitor regarding the quality, quantity, specifications and conditions or delivery particulars of the
Category: technical
products or services to which this bid invitation relates.
Category: technical
9. The terms of the accompanying bid have not been, and will not be, disclosed by the bidder, directly or
Category: technical
indirectly, to any competitor, prior to the date and time of the official bid opening or of the awarding of the
Category: technical
contract.
Category: technical
10. I am aware that, in addition and without prejudice to any other remedy provided to combat any restrictive
Category: technical
practices related to bids and contracts, bids that are suspicious will be reported to the Competition Commission
Category: technical
for investigation and possible imposition of administrative penalties in terms of section 59 of the Competition
Category: technical
Act No and or may be reported to the National Prosecuting Authority (NPA) for criminal investigation
Category: technical
and or may be restricted from conducting business with the public sector for a period not exceeding ten (10)
Category: technical
years in terms of the Prevention and Combating of Corrupt Activities Act No or any other applicable
Category: technical
legislation.
Category: technical
......................................................... .......................................
Category: technical
Signature Date
Category: technical
.......................................................... .......................................
Category: technical
Position Name of Bidder
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
10.CONDITIONS OF TENDER
Category: technical
TENDER CONDITIONS AND/OR INSTRUCTIONS SET OUT BELOW MUST BE STRICTLY ADHERED TO,
MandatoryCategory: technical
FAILING WHICH THIS TENDER SUBMISSION WILL BE DECLARED NON-RESPONSIVE.
Category: technical
10.1. No tender will be considered unless submitted on this Mnquma Local Municipality tender document.
Category: technical
10.2 Any portion of the tender document not completed will be interpreted as ‘not applicable’.
Category: technical
Notwithstanding the aforegoing, failure to complete any compulsory portion of the tender
Category: technical
document may result in the tender being declared non-responsive.
Category: technical
10.3 Tenders must be properly received and deposited, on or before the closing date and before the
MandatoryCategory: technical
closing time, in the relevant tender box. If the tender submission is too large to fit in the allocated
Category: technical
box, please enquire at the reception for assistance.
Category: technical
10.4 The Mnquma Local Municipality reserves the right to accept:
Category: technical
a. the whole tender or part of a tender or any item or part of any item, or to accept more than
Category: technical
one tender (in the event of a number of items being offered), and the Mnquma Local
Category: technical
Municipality is not obliged to accept the lowest or any tender;
Category: technical
b. a tender which is not substantially or materially different from the tender Specification.
Category: technical
10.5 The Mnquma Local Municipality shall not consider tenders that are received after the closing date
Category: technical
and time for such a tender.
Category: technical
10.6 The Mnquma Local Municipality will not be held responsible for any expenses incurred by
Category: technical
tenderers in preparing and submitting tenders.
Category: technical
10.7 The Mnquma Local Municipality may, after the closing date, request additional information or
Category: technical
clarification of tenders in writing.
Category: technical
10.8 A tenderer may request information, after the closing date, in accordance with the Promotion of
Category: technical
Administrative Justice Act, Act , and the Promotion of Access to Information Act,
Category: technical
Act .
Category: technical
10.9 A tenderer may request in writing, after the closing date, that the tender offer be withdrawn. Such
Category: technical
withdrawal will be permitted or refused at the sole discretion of the Mnquma Local Municipality
Category: technical
after consideration of the reasons for the withdrawal, which shall be fully set out by the
Category: technical
tenderer in such written request for withdrawal.
Category: technical
9.10 A tender submitted:
Category: technical
a. by a registered company may not be considered unless accompanied by a resolution by the
Category: technical
Directors of the company authorising the tender to be made and the signatory to sign
Category: technical
the tender on the company’s behalf (Schedule 1 to be completed);
Category: technical
b. by a registered close corporation may not be considered unless accompanied by written
Category: technical
authority from all the members of the close corporation authorising the tender to be made and
Category: technical
the signatory to sign the tender on the close corporation’s behalf (Schedule 1 to be
Category: technical
completed);
Category: technical
c. by a partnership/consortium/joint venture may not be considered unless accompanied by
Category: technical
written authority from all parties to the partnership/consortium/joint venture authorising the
Category: technical
tender to be made and the signatory to sign the tender on the partnership/consortium/joint
Category: technical
venture’s behalf (Schedule 2 to be completed).
Category: technical
10.11 Partnerships/Consortiums/Joint Ventures
Category: technical
In the case of partnerships/consortiums/joint ventures, a copy of the partnership/consortium/joint
Category: technical
venture agreement must be submitted with the tender document (attached to Schedule 2). All
MandatoryCategory: technical
parties/partners to the partnership/consortium/joint venture agreement must be registered on the
MandatoryCategory: technical
Mnquma Local Municipality Supplier Database.
Category: technical
10.12 Validity Period
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
Any tender submitted shall remain valid, irrevocable and open for written acceptance by the
Category: technical
Mnquma Local Municipality for a period of 90 days from the closing date or for such extended
Category: technical
period as may be applicable.
Category: technical
The tender offer will not be withdrawn or amended during the aforesaid validity period. The aforesaid
Category: technical
validity period may be extended by the provided that the original validity period has not expired, and
Category: technical
that all tenderers are given an opportunity to extend such period. Any such extension shall be agreed
Category: technical
to by a tenderer in writing.
Category: technical
Tenderers who fail to respond to such a request before the validity of their tender expires or who
Category: technical
decline such a request shall not be considered further in the evaluation process.
Category: technical
In the event that an appeal in terms of the Systems Act , is received, the validity period of
Category: technical
the tender shall be deemed to be extended until finalisation of the appeal; unless the tenderer has
Category: technical
requested in writing that its tender be withdrawn. The provisions in respect of withdrawal as set out in
Category: technical
10.9 above will apply to such withdrawal.
Category: technical
10.13 Tax clearance
Category: technical
No award shall be made to a person whose tax matters have not been declared to be in order by the
Category: technical
South African Revenue Service (SARS).
Category: technical
Tenderers are therefore required to obtain a valid Tax Clearance Certificate from the local SARS office
MandatoryCategory: technical
where such tenderer is registered for income tax/VAT purposes.
Category: technical
It is the responsibility of each supplier (successful tenderer) to submit updated original tax clearance
Category: technical
certificates to the Supplier Management Office (in the Supply Chain Management department should
Category: technical
any current certificate expire during the contract period. Failure to do so may lead to the suspension
Category: technical
of transactions with the supplier until a valid tax clearance certificate is received by the Supplier
Category: technical
Management Office. Each party to a consortium/joint venture/partnership must comply with all of the
MandatoryCategory: technical
above.
Category: technical
10.14 Inducements, rewards, gifts and other abuses of the Supply Chain Management System
Category: technical
No person who is a provider or prospective provider of goods or services, or a recipient or prospective
Category: technical
recipient of goods disposed or to be disposed of, may directly or indirectly:
Category: technical
a. influence or interfere with the work of any Mnquma Local Municipality officials involved in
Category: technical
the tender process in order to inter alia:
Category: technical
- influence the process and/or outcome of a tender;
Category: technical
- incite breach of confidentiality and/or the offering of bribes;
Category: technical
- cause over- or under-invoicing;
Category: technical
- influence the choice of procurement method or technical standards;
Category: technical
- influence any Mnquma Local Municipality official in any way which may secure an unfair
Category: technical
advantage during or at any stage of the procurement process.
Category: technical
Abuse of the supply chain management system is not permitted and may result in the tender being
Category: technical
rejected, cancellation of the contract, ‘blacklisting’ and/or any such remedies as set out in the Mnquma
Category: technical
Local Municipality SCM Policy and Abuse Policy.
Category: technical
11. Declarations and authorization
Category: technical
Tenderers are required to complete all statutory declarations and authorizations in the schedules attached
MandatoryCategory: technical
to this tender document, failing which the tender may be declared non-responsive.
Category: technical
12. Alternative offers
Category: technical
Alternative tenders may be considered, provided that a tender free of qualifications and strictly in accordance
Category: technical
with the bid documents is also submitted. The MnqumaLocal Municipality shall not be bound to consider
Category: technical
alternative tenders.
Category: technical
13. Objections, Complaints, Queries and Disputes / Appeals in terms of Section 62 of the
Category: technical
Systems Act / Access to Court
Category: technical
Objections, complaints, queries and disputes
Category: technical
13.1 Persons aggrieved by decisions or actions taken by the MnqumaLocal Municipality in the
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
implementation of the supply chain management system or any matter arising from a contract
Category: technical
awarded in terms of the supply chain management system may, within 14 days of the
Category: technical
decision or action, lodge a written objection or complaint or query or dispute against the
Category: technical
decision or action.
Category: technical
Section 62 Appeals
Category: technical
13.2 In terms of Section 62 of the Systems Act (Municipal Systems Act, Act ), a person
Category: technical
whose rights are affected by a decision taken by a political structure, political office bearer,
Category: technical
Board of directors or staff member of a MnqumaLocal Municipality in terms of a power
Category: technical
or duty delegated or sub-delegated by a delegating authority may appeal against that
Category: technical
decision by giving written notice of the appeal and reasons to the Accounting Officer
Category: technical
within 21 days of the date of the notification of the decision.
Category: technical
13.3 An appeal shall contain the following:
Category: technical
i. The reason and /or ground for the appeal.
Category: technical
ii. The way in which the appellant’s right have been affected ;
Category: technical
iii. The remedy sought by the appellant’s.
Category: technical
Access to court
Category: technical
The clauses above do not influence any person’s rights to approach the High Court at any time or
Category: technical
their rights in terms of the Promotion of Administrative Justice Act, Act (‘PAJA’), or the
Category: technical
Promotion of Access to Information Act, Act (‘PAIA’).
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
11. GENERAL CONDITIONS OF CONTRACT
Category: technical
TABLE OF CLAUSES
Category: technical
1. Definitions
Category: technical
2. Application
Category: technical
3. General
Category: technical
4. Standards
Category: technical
5. Use of contract documents and information; inspection
Category: technical
6. Patent rights
Category: technical
7. Performance security
Category: technical
8. Inspections, tests and analysis
Category: technical
9. Packing
Category: technical
10. Delivery and documents
Category: technical
11. Insurance
Category: technical
12. Transportation
Category: technical
13. Incidental services
Category: technical
14. Spare parts
Category: technical
15. Warranty
Category: technical
16. Payment
Category: technical
17. Prices
Category: technical
18. Contract amendments
Category: technical
19. Assignment
Category: technical
20. Subcontracts
Category: technical
21. Delays in the supplier’s performance
Category: technical
22. Penalties
Category: technical
23. Termination for default
Category: technical
24. Dumping and countervailing duties
Category: technical
25. Force Majeure
Category: technical
26. Termination for insolvency
Category: technical
27. Settlement of disputes
Category: technical
28. Limitation of liability
Category: technical
29. Governing language
Category: technical
30. Applicable law
Category: technical
31. Notices
Category: technical
32. Taxes and duties
Category: technical
33. National Industrial Participation Programme (NIPP)
Category: technical
34. Prohibition of restrictive practices
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
General Conditions of Contract
Category: technical
1. Definitions 1. The following terms shall be interpreted as indicated:
Category: technical
1.1 “Closing time” means the date and hour specified in the bidding documents for the receipt of bids.
Category: technical
1.2 “Contract” means the written agreement entered into between the purchaser and the supplier, as recorded
Category: technical
in the contract form signed by the parties, including all attachments and appendices thereto and all documents
Category: technical
incorporated by reference therein.
Category: technical
1.3 “Contract price” means the price payable to the supplier under the contract for the full and proper
Category: technical
performance of his contractual obligations.
Category: technical
1.4 “Corrupt practice” means the offering, giving, receiving, or soliciting of anything of value to influence the
Category: technical
action of a public official in the procurement process or in contract execution.
Category: technical
1.5 "Countervailing duties" are imposed in cases where an enterprise abroad is subsidized by its government
Category: technical
and encouraged to market its products internationally.
Category: technical
1.6 “Country of origin” means the place where the goods were mined, grown or produced or from which the
Category: technical
services are supplied. Goods are produced when, through manufacturing, processing or substantial and major
Category: technical
assembly of components, a commercially recognized new product results that is substantially different in basic
Category: technical
characteristics or in purpose or utility from its components.
Category: technical
1.7 “Day” means calendar day. 1.8 “Delivery” means delivery in compliance of the conditions of the contract or
Category: technical
order.
Category: technical
1.8 “Delivery ex stock” means immediate delivery directly from stock actually on hand.
Category: technical
1.9 “Delivery into consignees store or to his site” means delivered and unloaded in the specified store or depot
Category: technical
or on the specified site in compliance with the conditions of the contract or order, the supplier bearing all
Category: technical
risks and charges involved until the supplies are so delivered and a valid receipt is obtained.
Category: technical
"Dumping" occurs when a private enterprise abroad market its goods on own initiative in the RSA at lower
Category: technical
prices than that of the country of origin and which have the potential to harm the local industries in the RSA.
Category: technical
1.10 ”Force majeure” means an event beyond the control of the supplier and not involving the supplier’s
Category: technical
fault or negligence and not foreseeable. Such events may include, but is not restricted to, acts of the
Category: technical
purchaser in its sovereign capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions and
Category: technical
freight embargoes.
Category: technical
1.11 “Fraudulent practice” means a misrepresentation of facts in order to influence a procurement process
Category: technical
or the execution of a contract to the detriment of any bidder, and includes collusive practice among bidders
Category: technical
(prior to or after bid submission) designed to establish bid prices at artificial non-competitive levels and to
Category: technical
deprive the bidder of the benefits of free and open competition.
Category: technical
1.12 “GCC” means the General Conditions of Contract.
Category: technical
1.13 “Goods” means all of the equipment, machinery, and/or other materials that the supplier is required to
MandatoryCategory: technical
supply to the purchaser under the contract.
Category: technical
1.16 “Imported content” means that portion of the bidding price represented by the cost of components, parts
Category: technical
or materials which have been or are still to be imported (whether by the supplier or his subcontractors) and
Category: technical
which costs are inclusive of the costs abroad, plus freight and other direct importation costs such as landing
Category: technical
costs, dock dues, import duty, sales duty or other similar tax or duty at the South African place of entry as well
Category: technical
as transportation and handling charges to the factory in the Republic where the supplies covered by the bid will
Category: technical
be manufactured.
Category: technical
1.17 “Local content” means that portion of the bidding price which is not included in the imported content
Category: technical
provided that local manufacture does take place.
Category: technical
1.18 “Manufacture” means the production of products in a factory using labour, materials, components and
Category: technical
machinery and includes other related value-adding activities.
Category: technical
of 46
Category: technical
MNQUMA LOCAL MUNICIPALITY
Category: technical
No specific requirements found
MandatoryCategory: compliance
04 Feb
2026
Tender Published
Tender was published
12 Feb
2026
Closing Date
Tender closing date
Pending
Awaiting Award of Contract
This tender has not yet been awarded. The contracting authority is expected to publish the award notice in due course.
12 Feb
2026
Submissions Closed
No further submissions were accepted after this date.
Organization
Mnquma Local MunicipalityWin Mnquma tenders with AI Matching Engine, urban-rural integration intelligence, and application support for Butterworth and Centane projects.
Contact Person
S Qwaka
Phone
047-050-1155
Win Mnquma tenders with AI Matching Engine, urban-rural integration intelligence, and application support for Butterworth and Centane projects.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubLearn how to submit a winning bid with these related articles
Median Estimate
R 2 064 480
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Important Dates
Source: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdfContact Information
Source: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdfSubmission Guidelines
Source: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdfEvaluation Criteria
Source: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdfTechnical Specifications
Source: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdfFinancial Requirements
Source: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdfCompliance Requirements
Source: Bid DOCUMENT- TRAINING OF MUNICIPAL OFFICIALS ON PERFORMANCE MANAGEMENT.pdfSets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
Cnr King and Mthatha Street - Butterworth - Butterworth - 4960
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
1
Last checked
05 Jun 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Key Personnel
💡 Want more tendering tips and strategies?
Explore Our BlogGet deep intelligence on Services: Professional. Unlock full pricing strategies, bid frequency, and historical win rates.