Manufacture, supply, delivery, removal and installation of air heater element packs for three units at tutuka power station

Insufficient searchable text - AI extraction recommended

No eligibility criteria specified

Air heater packs wear over time and get partially blocked. Partial blockage can be remedied by high

pressure of packs but worn packs cannot be refurbished. Air heater packs are therefore replaced at

a certain interval for wear as per maintenance philosophy. Pack wear measurements are carried out

to help predict the replacement and this assist in the planning. This document seeks to define the

scope of work for replacement of air heater packs and the battery limits.

2. Supporting Clauses

2.1 Scope

The scope of work for the replacement of air heater element packs includes the supply and delivery

and installation. The supply scope of supply includes air heater element packs, U-bracket/supports

and U-channels, safe working platform and provision of associated equipment like forklift,

compressor etc. The installation of the elements includes removal of old elements, repair of the stator

radial and divisional plates, and installation of new packs, welding of U-channels on radial and

divisional plates and the supply of equipment.

2.1.1 Purpose

The document defines the scope of work for the replacement of air heater element packs. This scope

of work includes the supply of air heater element packs, U-brackets pack supports, spacer boxes

and U-channels and the removal and replacement of element packs.

2.1.2 Applicability

This document shall apply to Tutuka Power Station.

2.1.3 Effective date

The document is effective from the authorisation date.

2.2 Normative/Informative References

Parties using this document shall apply the most recent edition of the documents listed in the

following paragraphs.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

2.2.1 Normative

[1] 15ENG GEN-0903 – Outage philosophy

[2] 15ENG STR-001 – Draught Plant Maintenance Execution Strategy

[3] 32-727 SHEQ Policy

2.2.2 Informative

[4] ISO 9001 Quality Management Systems

2.3 Definitions

2.3.1 Document:

• Controlled disclosure: controlled disclosure to external parties (either enforced by law, or

discretionary).

2.4 Abbreviations N/A

Abbreviation Explanation

2.5 Roles and Responsibilities

• Boiler Plant Engineering shall include the air heater element packs replacement in the outage

scope of work for the upcoming outages.

• Projects shall, in conjunction with Procurement, place contracts for air heater element packs, U-

brackets/ supports, U-channels and for provision of safe working platforms, forklift and

compressor and for replacement of element packs and shall coordinate the replacement of

element packs

2.6 Process for Monitoring

• Air heater pack plates will be extracted during major outages from selected packs for mass loss

measurements to assist in prediction of wear.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

2.7 Related/Supporting Documents

• Not applicable

The scope of work is divided into two:

• Supply and delivery of air heater element packs, space boxes, U-bracket pack supports, U-

channels and safe working platforms.

• Installation of air heater packs including hiring of compressors and equipment for the work.

3.1 Description of air heater packs

The air heater element packs are for Rothemühle twin flow air heaters. The air heaters are twin

flow type/size: VU 13.2-6.23 (0.655 + 0.655 + 0.3C). The air heater stator consists of 64 radial

plates and 7 rings which form 448 cells in which the element packs are installed. A lube oil tunnel

takes a cell of each ring. The element packs are supported at the bottom by pack supports welded

onto the radial plates. Spacer boxes are installed between the cold end and intermediate element

packs to ensure the element packs are only about 50mm short of the air heater stator flange

3.1.1 The air heater element packs consist of 3 layers; the hot end elements (top), the

intermediate elements and the cold end elements (bottom).

3.1.2 The element packs are of HC11 profile made from 0.5mm thick mild steel (SAE 1008) for

hot end and intermediate layers and 0.8mm thick mild steel (SAE 1008) for cold end layer.

3.1.3 The heights of elements are 600mm for hot end, 655mm for intermediate and 300mm for

the cold end.

3.1.4 The lengths and widths of the element packs are sized based on the size of the air heater

stator cells.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

3.2 Scope of work for supply

3.2.1 Manufacture, supply and deliver, as per table 1:

• Air heater element packs,
• Design and manufacture spacer boxes. The height of the spacer box is about 355mm.
• U-brackets/supports. The U-channels will be released from the spares contract and

therefore will not be part of the scope of supply

• Set of safe working platforms for use during the replacement of air heater element packs to

cover cells from which air heater element packs have been removed.

3.2.2 The spacer boxes must be designed in such a way that they do not take significant space of

the cells. The general arrangement drawings of proposed/ designed spacer boxes will need

to be sent for acceptance by Eskom.

3.2.3 The air heater element packs shall be packaged. Packaging shall be of material that will not

be damaged, to an extent possible, by harsh weather conditions during transportation.

Packaging shall be such that the spare/ element packs can be positively identified through

the packaging. In the event that the packaging is damaged during transportation of the air

heater element packs, supplier shall make arrangement to replace the damaged packaging.

a) The Supplier will ensure proper handling of the spares (from procurement of equipment,

storage and transportation). The Supplier shall supply preservation and storage procedure/s

for the element packs.

No. Material Description Quantity per Quantity per Total quantity

Ring

Numbers air heater boiler

1 1 0590952 Hot end 63 126 378

2 2 0590947 Hot end 63 126 378

3 3 0590950 Hot end 63 126 378

4 4 0590896 Hot end 63 126 378

5 5 0590895 Hot end 63 126 378

6 6 0590898 Hot end 63 126 378

7 7 0590955 Hot end 63 126 378

8 1 0590904 Intermediate 63 126 378

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

9 2 0590903 Intermediate 63 126 378

10 3 0590900 Intermediate 63 126 378

11 4 0590905 Intermediate 63 126 378

12 5 0590894 Intermediate 63 126 378

13 6 0590946 Intermediate 63 126 378

14 7 0590949 Intermediate 63 126 378

15 1 0590953 Cold end 63 126 378

16 2 0590951 Cold end 63 126 378

17 3 0590892 Cold end 63 126 378

18 4 0590897 Cold end 63 126 378

19 5 0590893 Cold end 63 126 378

20 6 0590948 Cold end 63 126 378

21 7 0590954 Cold end 63 126 378

U-brackets/ 22 0774092 1 764 3 528 10 584

supports

23 Spacer box 63 126 378

ring 1

24 Spacer box 63 126 378

ring 2

25 Spacer box 63 126 378

ring 3

26 Spacer box 63 126 378

ring 4

27 Spacer box 63 126 378

ring 5

28 Spacer box 63 126 378

ring 6

29 Spacer box 63 126 378

ring 7

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

Safe working 30 0775110 & 64 (1 set) 64 (1 set)

platform 0775111

U-channels 31 0737609 180 360 1 080

(6m length)

Transportation 32

of element

packs & U-

bracket

Transportation 33

of spacer

boxes

Transportation 34

of safe working

Table 1: Bill of materials / Quantities

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

3.3 Scope of work for removal and installation of element packs (site)

3.3.1 Carry out site establishment and de-establishment

3.3.2 Provide equipment (forklift, tractor etc) for transporting the air heater element packs from

storage area to the hoisting bays of the units

3.3.3 Provide compressor and hoists for lifting the element packs to the air heaters area (33m

level) and to working platforms and into the air heaters.

3.3.4 Supply equipment for extracting air heater packs like I-beams with wheeled support on one

end, chain blocks etc for lifting and for moving the air heaters elements to different cells

inside the air heaters.

3.3.5 Open the access doors and cut out a hole on each air heater on the rear (boiler side).

Eskom scaffolding partner shall erect scaffolding working platforms and shall remove the

lagging.

3.3.6 Install equipment for hoisting element packs to or from working platforms

3.3.7 Install equipment in the air heaters for removing and installing the air heater element packs.

3.3.8 Gouge out all the radial and rings 2 and 3 divisional U-channels on both cold and hot ends

3.3.9 Install equipment for replacement of air heater packs and safe working platforms in the air

heaters

3.3.10 Gouge out all the existing pack bottom supports in preparation for removal of packs

3.3.11 Remove the air heater fire detection thermocouples on the cold ends

3.3.12 Remove (pull out) all air heater packs. Cover the cells from the air heater packs have been

extracted with safe working platform

3.3.13 Inspect the radial and divisional plates with all packs removed. Identify all the deformed and

erosion-damaged areas requiring repairs

3.3.14 Repair the identified defects on the radial and divisional plates.

3.3.15 Hoist down the old air heater packs to 0m level and put them the scrap bins or transport to

designated area.

3.3.16 Install new U-brackets bottom pack supports.

3.3.17 Transport a set of air heater packs from the storage area to hoist area for each unit

3.3.18 Hoist this set of air heater packs from 0m level to air heaters area (33m level) for each unit.

3.3.19 Install new cold end air heater element packs and install the spacer boxes on top the cold

end elements in all the cells.

3.3.20 Install the intermediate and hot end element packs in all the cells.

3.3.21 Install U-channels on both cold and hot ends on the radial and ring 2 and 3 divisional plates

making sure that they are at the same level with the hubs and stator flanges and weld.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

3.3.22 Grind the air heater U-channel welds ensuring that there are no raised points that can

cause excessive rubbing between the stator and the cast iron wear shoes.

3.3.23 Remove the pack replacement equipment from the air heaters and the hoists for taking the

packs up to and down from the working platforms.

3.3.24 Carry out seal setting on both cold and hot ends and lock the spring pin nuts with nut gaps

as per data sheet.

3.3.25 Close the access doors and close the openings that had been cut out for the replacement of

air heater packs

3.3.26 Test run the air heaters; note and record the drive motor currents.

3.4 General

3.4.1 Eskom, through another service provider, will erect the required scaffolding platforms and

also remove cladding when required for this scope of work.

3.4.2 Eskom will arrange for collection of old element packs under the scrap metal contract as

and when required from the metal bins or from the designated area.

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

Appendix A – Costing sheet

No. Material Description Total Price per Total Price

Ring

Numbers Quantity Unit

1 1 0590952 Hot end 378

2 2 0590947 Hot end 378

3 3 0590950 Hot end 378

4 4 0590896 Hot end 378

5 5 0590895 Hot end 378

6 6 0590898 Hot end 378

7 7 0590955 Hot end 378

8 1 0590904 Intermediate 378

9 2 0590903 Intermediate 378

10 3 0590900 Intermediate 378

11 4 0590905 Intermediate 378

12 5 0590894 Intermediate 378

13 6 0590946 Intermediate 378

14 7 0590949 Intermediate 378

15 1 0590953 Cold end 378

16 2 0590951 Cold end 378

17 3 0590892 Cold end 378

18 4 0590897 Cold end 378

19 5 0590893 Cold end 378

20 6 0590948 Cold end 378

21 7 0590954 Cold end 378

22 Spacer box ring 1 378

23 Spacer box ring 2 378

24 Spacer box ring 3 378

25 Spacer box ring 4 378

26 Spacer box ring 5 378

27 Spacer box ring 6 378

28 Spacer box ring 7 378

29 0774092 U-brackets/ 10 584

supports

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

30 0737609 U-channels (6m 1 080

length)

31 0775110 & Safe working 1

0775111 platform

32 Transportation of

element packs

33 Transportation of

spacer boxes

34 Transportation of

safe working

35 Services for removal & installation of 3

packs including pack replacement

equipment and equipment for

transporting element packs for storage

area

Total costs

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

Replacement of Boilers 1 to 5 Air Heater Element Unique Identifier: 15ENG GEN-3206

Packs

Revision: 2

Page:

Appendix B Document Hierarchy N/A

Controlled disclosure

When downloaded from the document management system, this document is uncontrolled and the responsibility rests with the user to

ensure it is in line with the authorized version on the system. No part of this document may be reproduced in any manner or form by

third parties without the written consent of Eskom Holdings SOC Ltd, © copyright Eskom Holdings SOC Ltd, Reg No 2002/015527/30

No specific requirements found

. Introduction ............................................................................................................................... 3

2. Supporting Clauses .................................................................................................................. 3

2.1 Scope ............................................................................................................................... 3

2.1.1 Purpose ................................................................................................................. 3

2.1.2 Applicability ........................................................................................................... 3

2.1.3 Effective date ......................................................................................................... 3

2.2 Normative/Informative References ................................................................................... 3

2.2.1 Normative .............................................................................................................. 4

2.2.2 Informative............................................................................................................. 4

2.3 Definitions ........................................................................................................................ 4

2.3.1 Document: ............................................................................................................. 4

2.4 Abbreviations N/A ............................................................................................................. 4

2.5 Roles and Responsibilities ............................................................................................... 4

2.6 Process for Monitoring ...................................................................................................... 4

2.7 Related/Supporting Documents ........................................................................................ 5

3. Scope of work ......................................................................................................... 4

3.1 Description of air heater packs ......................................................................................... 5

3.2 Scope of work for supply .................................................................................................. 6

3.3 Scope of work for removal and installation of element packs (site) ................................... 9

3.4 General .......................................................................................................................... 10

4. Acceptance ................................................................................ Error! Bookmark not defined.

5. Revisions ................................................................................... Error! Bookmark not defined.

6. Development Team ................................................................... Error! Bookmark not defined.

7. Acknowledgements ................................................................... Error! Bookmark not defined.

Appendix A – Costing sheet .......................................................................................................... 11

Appendix B Document Hierarchy N/A ........................................................................................... 13

pressure of packs but worn packs cannot be refurbished. Air heater packs are therefore replaced at

a certain interval for wear as per maintenance philosophy. Pack wear measurements are carried out

to help predict the replacement and this assist in the planning. This document seeks to define the

scope of work for replacement of air heater packs and the battery limits.

Revision: 2

Page:

3.3.22 Grind the air heater U-channel welds ensuring that there are no raised points that can

cause excessive rubbing between the stator and the cast iron wear shoes.

3.3.23 Remove the pack replacement equipment from the air heaters and the hoists for taking the

packs up to and down from the working platforms.

3.3.24 Carry out seal setting on both cold and hot ends and lock the spring pin nuts with nut gaps

as per data sheet.

3.3.25 Close the access doors and close the openings that had been cut out for the replacement of

air heater packs

3.3.26 Test run the air heaters; note and record the drive motor currents.

3.4 General

3.4.1 Eskom, through another service provider, will erect the required scaffolding platforms and

also remove cladding when required for this scope of work.

3.4.2 Eskom will arrange for collection of old element packs under the scrap metal contract as

and when required from the metal bins or from the designated area.

Revision: 2

Page:

Appendix A – Costing sheet

{"closingDate":"23Aug2022","closingTime":"3:42pm"}

{"name":null,"email":"[email protected]","phone":null,"department":null,"address":"ls before they can be granted access to the eTendering system. An"}

Bidders must be registered on the National Treasury Central Supplier Database (CSD) and have a valid CSD number to access the eTendering system. A valid email address and South African cellphone number (with +27 prefix) are required for registration and OTP verification.

eTendering system is a web-based system that allows suppliers bidding for various tenders advertised

on Tender Bulletin system to “upload” their tender documents. Currently the tenderers or suppliers

submit tender documents at various Eskom tender offices. eTendering system replaces the manual or

physical submission of tender documents at various Eskom tender offices. eTendering system in a

nutshell is an electronic box where tender documents can be “dropped” or “uploaded”. Suppliers will

be required to register their details before they can be granted access to the eTendering system. An

OTP (one time pin) will be sent to both their cell phone and email address.

Quick and direct access is also available by using the following links:

• TenderBulletin Public website: https://tenderbulletin.eskom.co.za - this is used by members

of the public, to view and access Eskom published tenders. eTendering hyperlink will be found

on this site. Members of the public may follow prompt instructions once they have clicked on

the eTendering link (https://eTendering.eskom.co.za). This link will allow them to upload the

required tender documentation.

• eTendering website Public website: https://eTendering.eskom.co.za - this is used by

members of the public, to view information about published tenders and submit their tender

documents.

• N.B: Members of the public would need to have a CSD number to gain access to

eTendering system.

2 Problems

A channel of communication has been created in case users of the system experiences a problem

with the system. In a case users come across some difficulties in using Tender bulletin, eTendering

and OpenText systems they need to contact the buyer responsible for the published tender.

3 What’s New

A new functionality to “add closed tenders”. Closed tenders refers to the tenders which are not listed

on Tenderbulletin as normal tenders, but are tenders sent directly to the relevant and potential

suppliers who meet the selection and evaluation criteria to offer what the buyer needs. These

suppliers will be sent a link via email to bid privately.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

4 Getting Started

To gain access to eTendering portal

1. Open your web browser

2. Type TenderBulletin (eskom.co.za) or https://eTendering.eskom.co.za

3. eTendering system login page will be displayed:

Fig 1

Registration Form Steps to follow

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

• Complete all the fields
• Contact number must start with a

Plus prefix e.g +27

• Ensure that you also fill in the

capture picture to validate that you

are not a robot.

• Once all columns have been filled

click on register button

• Pop-up message will be displayed asking

the registerer to verify the email sent to

the provided email address.

• If the email does not come through,

click on “Resend Verification Email”

button

• email to be resent,
• Once you have received the email click

on link provided on

the email.

• Then you will be directed back to

etendering site with a login screen

displayed, now complete the login

with your verified email address and

password

Fig1.1

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

Fig2a.

Fig2b.

Fig3.

4. Once the email is verified, login using your registered email address and password then the

OTP page will be displayed

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

5. OTP sent to the registered cellphone number and email address

6. Insert the otp number then click “Verify OTP” button, to resend OTP click on “Resend OTP”

button

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

7. Landing page once OTP is verified

8. Select the preferred “Ref No”

9. A page with the preferred Tender information is displayed before tender documentation can

be submitted.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

10. Click on “Create New Submission” button to submit required Tender documents

11. Landing page once clicked on “Create New Submission” button. Take note of the

mentioned disclaimers.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

12. To submit tender documents, click on “Add file” button

13. Upload required tender documents by:

14. Giving the file a name

15. Select the listed file type e.g.: Technical, commercial, finance and etc

16. Choose the file you need to upload

17. Then click on “Upload” button, Fig5.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

Fig4.

Fig5.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

14. Once clicked on “Upload” button, this page will be displayed with the submitted document(s).

Continue to submit all the required documents under the correct category ,i.e: Technical

should be selected if technical documentation is uploaded and etc. Verify all required

documents are uploaded before making ‘Final Submission’ by clicking on ‘Finalize

Submission’ button.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

15. Click on “Finalize Submission” button. A file size cannot exceed 50MB and a total size of

all uploaded files should not exceed 900MB.

16. Once “Finalize Submission” button is clicked the pop-up message confirming the submission

will pop-up

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

17. Click on “Finalise and Close Submission” button to finalize the submission of documents.

If not all documents were submitted or still wish to add or submit more documents, click on

“No, continue adding files” button.

18. Once the submission is finalised the page with all submitted documents will display with the

submission and closed time and date timestamp at the bottom.

19. To view submitted tenders, click on “My Submissions” menu option. All your individually

submitted tenders will be displayed.

If you want to view or verify the submitted documents, click on “View Submission” button

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

20. Once the submission process is complete an email with be sent to the submitter with all

submitted documents on email,Fig6.This is the final step for the submitter or tenderer.

It is vital to save the email with the submission ID for future enquiry if need be.

--------Originalmessage--------

From:Eskom E-Tender Document Submission 28 [email protected]

Date:Tue,23Aug2022,3:42pm

To:[email protected]

Subject: Response To Submitter

Eskom E-Tender Document Submission 28

Hi Monalisa

You have finalized a new submission with submission id:14 on tender #MPKUS10086PS

closing date : 2022-11-30 10:00:00.

Have started the submission from 2022-08-23 14:28:33 and finalized at 2022-08-23

15:42:28

Tender Description:

Award for Provision of Office Cleaning and Janitorial Services at Kusile Power Station

Project

Files Submitted:

ID Original Name Title Size Type

38 Test7.pdf testingCom 33141 Commercial

40 Test1.pdf testingTech 33502 Technical

41 Test15.pdf testingFin 33141 Finance

Thanks,

Eskom E-Tender Document Submission 28 Automated Mail

© 2022 Eskom E-Tender Document Submission 28. All rights reserved.

NB: This Email and its contents are subject to the Eskom Holdings SOC Ltd EMAIL

LEGAL NOTICE which can be viewed at

http://www.eskom.co.za/Pages/Email_Legal_Spam_Disclaimer.aspx

Fig6.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

5 Edit Registration

To edit already registered information such as Name, Organization, CSD and cell phone number

select “Edit Registration” on the drop down, Fig1. New window with information that needs to be

updated pop ups,Fig2. Click on “Update” button to update registration details.

Fig1.

Fig2.

6 Log off Button

To logout, click “Log out” on the dropdown next to your name

Fig1.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

7 Password reset

To reset a forgotten password, click “Forgot your password” Fig1. and a new screen will

pop up to enter an alternative email where the new password will be sent Fig2.Confirmation

message will be sent to the user, Fig3.

Fig1.

Fig2.

Fig3.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

An email confirming password reset will be sent to the email provided.

Click on the link or “Reset Password” button to reset the password.

Fig4.

A new window will pop up to reset and confirm the new password, Fig5.Enter new

password and confirm then click on “Reset Password” button.

Fig5.

OTP window will pop up, type in the OTP sent to either the cell phone or email address.

Fig6.

© 2023 Eskom of 19

Proprietary and Confidential

Eskom eTendering System

User Manual

OTP successfully goes through and lands on the below screen, password is successfully

reset.

Fig7.

8 General

This system is compatible to most web browsers however we recommend Ms Edge.

The end.

© 2023 Eskom of 19

CSD number to gain access to

The tender is for the Manufacture, Supply, Delivery, Removal and Installation of Air Heater Element Packs for three units at Tutuka Power Station. The Works Information is identified as Part 3 Scope of Work (Unique Identifier 15ENG GEN-3206 titled Replacement of Boiler 1 to 5 Air Heater Element Packs), including all referenced documents and drawings. The site boundaries are Tutuka Power Station (Unit 1, 4 and 5 Left Hand and Right-Hand Air Heaters). The Risk Register includes risks such as industrial action, adverse weather, late delivery, health and safety incidents, plant access restrictions, contractor interface management, testing/commissioning failures, damage to existing plant, lifting/rigging risks, and inadequate supervision. Key Performance Indicators are per Annexure B (monitoring only, no incentives) with monthly reporting.

Employer: Eskom Holdings SOC Ltd, registered office: Megawatt Park, Maxwell Drive, Sandton, Johannesburg. Project Manager and Supervisor: Tutuka Power Station, Bethal Road, Standerton, 2430. The Project Manager is the employer's agent for securities, bonds, guarantees, and insurance. Adjudicator nominating body: Chairman of ICE-SA (www.ice-sa.org.za). Arbitration body: Association of Arbitrators (Southern Africa), seat Mpumalanga.

Returnable documents: C1.1 Form of Offer and Acceptance (must be signed and submitted with the offer), C1.2b Contract Data provided by the Contractor, and any schedule of deviations. The Offer is submitted by signing the Offer part of C1.1. Pricing data (Part C2) and completed activity schedule must be included. No other returnable forms are explicitly listed in the provided text.

Evaluation criteria are not specified in the provided document. The document is a contract template (NEC3 ECC) rather than a tender evaluation document. No scoring split, minimum thresholds, or preference points are stated.

Scope: Manufacture, Supply, Delivery, Removal and Installation of Air Heater Element Packs for three units (Unit 1, 4 and 5) at Tutuka Power Station. Works Information is in Part 3 Scope of Work (Unique Identifier 15ENG GEN-3206, titled Replacement of Boiler 1 to 5 Air heater Element Packs) and all referenced documents and drawings. Site boundaries: Tutuka Power Station (Unit 1, 4 and 5 Left Hand & Right-Hand Air Heaters). The supply items include Cold End, Intermediate, and Hot End Element Packs (each with 7 stock codes, Qty 378 per item), U-brackets/supports (Qty 10584), Spacer box rings (Qty 378 per ring), Safe working & platform (1 set), U-channels 6m length (Qty 1080), and transportation of these items. Removal and installation activities include removal of old packs, installation of new packs, provision of equipment, inspections, and repairs of relevant areas.

The Contractor must submit a first programme within 2 weeks after the Contract Date. Revised programmes must be submitted at intervals no longer than 2 days during unit outages. The programme must show how each activity on the Activity Schedule relates to the operations. The tendering contractor should develop a high-level programme, resource each activity, and arrive at lump sum prices. The Activity Schedule is only a pricing document; the Works are performed per the Works Information. The Risk Register is maintained throughout execution. Key dates are tied to the Accepted Programme per unit. Access dates are per the outage listing.

The Contractor must nominate key persons with details of name, job, responsibilities, qualifications, and experience. CVs are appended to a Tender Schedule. The Contractor must provide direct fee percentage and subcontracted fee percentage. The tendered total of the Prices (excluding VAT) and the activity schedule location must be provided.

Defects date is 52 weeks after Completion. Defect correction period is 48 hours after notification. Key Performance Indicators (Option X20) are listed in Annexure B and are for monitoring only (no incentives). Monthly performance reporting against each KPI is required.

Pricing is under NEC3 Option A: lump sum per activity on the Activity Schedule. Only completed activities are assessed for payment; no part payment for incomplete activities. The Activity Schedule is not Works Information or Site Information (clause 54.1). The tendering contractor prepares the activity schedule by breaking down the work into activities. The activity schedule items include:

• Cold End Element Packs (7 items, Qty 378 each)
• Intermediate Element Packs (7 items, Qty 378 each)
• Hot End Element Packs (7 items, Qty 378 each)
• U-brackets/support (Qty 10584)
• Spacer box rings (7 items, Qty 378 each)
• Safe working & platform (1 set)
• U-channels 6m length (Qty 1080)
• Transportation for element packs & U-brackets (Per Unit, Qty 3)
• Transportation for spacer boxes (Sum, Qty 1)
• Transportation for safe working (Sum, Qty 1)

Preliminary and General items include office and storage shed, overheads, forklift, compressor, crane, safety file, and medicals/inductions/PPE.

Pricing format: NEC3 Option A — Priced contract with activity schedule (lump sum per activity). Only completed activities are assessed for payment; no part payment for incomplete activities. The activity schedule is a pricing document only, not Works Information. Assessment interval: 4 weeks. Payment period: 60 days after submission of a valid invoice. Interest rate: Standard Bank prime rate (Rands) or LIBOR (other currencies). Performance bond: 10% of the total of the Prices. Retention: 5% from each amount due, accumulated to 5% of total Prices (50% released at Completion, 50% at Defects Date). Delay damages: 1% of the section Prices per day, capped at 10% per section, total capped at 10% of total Prices. Price adjustment for inflation (Option X1) applies; base date for indices is one month prior to enquiry closing date; 15% non-adjustable. Contractor's liability for indirect/consequential loss limited to R0. Contractor's total liability limited to total of Prices (except excluded matters: design defects, off-site manufacture, property damage, death/injury, IP infringement).

CSD registration: Required. Tax compliance: Valid SARS tax clearance certificate or tax compliance status PIN required. B-BBEE: Valid verification certificate required to claim preference points. The contract includes a B-BBEE status change clause (Z3): notify Employer within 7 days of any change, submit updated certificate within 30 days; decreased status may lead to renegotiation or termination. CIDB grading: Not explicitly stated in the provided text. Parent company guarantee (Option X4) required if the Contractor is a subsidiary. Key personnel: Must be nominated with CVs appended to a Tender Schedule. Construction Regulations 2014 compliance required. Asbestos Standard 32-303 compliance required. No Prohibited Actions (corrupt, fraudulent, coercive, collusive, obstructive practices). Insurance: Contractor provides insurance per Insurance Table A (works/plant/equipment, property, employee injury); Employer provides insurance per Insurance Table B (Assets All Risk, Contract Works, Environmental Liability, Public Liability, etc.).

The Construction Regulations 2014 (under OHSA) apply. The Contractor may be appointed as Principal Contractor. The Contractor warrants that the total of the Prices includes sufficient amount for compliance with all health & safety laws. The Contractor must comply with all applicable environmental laws. Asbestos management: The Employer ensures ambient air meets SA standards (OEL 0.2 fibres/ml as 4-hour TWA; STEL 0.6 fibres/ml as 10-minute TWA). Certification by a SANAS-accredited AAIA. The Contractor may perform parallel measurements at own expense. If asbestos is identified above the Action Level (0.1 fibres/ml), immediate control measures are implemented. Personnel may stop work and leave the area until declared safe. Asbestos removal and disposal are done by a registered asbestos contractor at the Employer's expense.

The Contractor must comply with all applicable environmental laws, regulations, rules, guidelines, and procedures. Environmental Liability insurance is provided by the Employer per Insurance Table B. Asbestos management is required per Eskom's Asbestos Standard 32-303. Nuclear liability: The Employer (as operator of Koeberg Nuclear Power Station) indemnifies the Contractor for nuclear damage, except for unlawful intent or unauthorised presence.

The contract is the NEC3 Engineering and Construction Contract (April 2013) with main Option A (Priced contract with activity schedule), dispute resolution Option W1, and secondary Options X1 (Price adjustment for inflation), X2 (Changes in the law), X4 (Parent company guarantee), X5 (Sectional Completion), X7 (Delay damages), X13 (Performance Bond), X16 (Retention), X18 (Limitation of liability), X20 (Key performance indicators), and Z (Additional conditions Z1-Z15). Governing law: South Africa. Language: English. Currency: South African Rand. Defects date: 52 weeks after Completion of the works. Defect correction period: 48 hours after notification. The Employer may terminate the contract if delay damages reach the stated limits. Additional conditions cover cession/delegation, joint ventures, B-BBEE status changes, confidentiality, waiver/estoppel, health/safety/environment, tax invoices, compensation events, employer liability limitation, termination for business rescue, delay damages termination, ethics (prohibited actions), insurance, nuclear liability, and asbestos management.

Employer: Eskom Holdings SOC Ltd (Reg No. 2002/015527/30), registered office: Megawatt Park, Maxwell Drive, Sandton, Johannesburg. Project Manager: Tutuka Power Station, Bethal Road, Standerton, 2430. Supervisor: Tutuka Power Station, Bethal Road, Standerton, 2430. Employer's agent for securities/bonds/guarantees/insurance: Project Manager (details in Contract Data). Adjudicator nominating body: Chairman of ICE-SA (joint Division of SAICE and London ICE), www.ice-sa.org.za. Arbitration body: Association of Arbitrators (Southern Africa) or successor, seat Mpumalanga, South Africa.

The main supplier must demonstrate the process and selection criteria applied when appointing contractors and suppliers, and notify Eskom prior to such appointments for the commencement of work.

Returnable documents: Annexure B Acknowledgement Form for Eskom SHE Rules and other Requirements (document identifier 240-43921804 Rev 5) must be completed, signed by an authorised person (CEO/Director/Managing Director), dated, and witnessed by two witnesses. The signed form confirms the tenderer has obtained and understands the referenced SHE documents and accepts the consequences of non-compliance.

Scope: Manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station. The main supplier must demonstrate the process and selection criteria used when appointing contractors and suppliers, notify Eskom prior to any such appointments, ensure appointed parties have adequate resources and competencies, and remain accountable for their SHE compliance. The main supplier must monitor contractors and suppliers through audits and assessments, define grounds for termination of sub-contracted work, and manage all non-conformances through performance and penalty processes. Eskom reserves the right to verify compliance and may request testimonials, references and client contact details for previous similar work.

Financial penalties will be enforced on the main supplier for non-conformances to Eskom or statutory SHE requirements, including those by sub-contractors or suppliers. Work stoppages due to SHE-related issues do not warrant financial compensation claims against Eskom. All employees (contractors/suppliers) must undergo the relevant Eskom induction and the company's own induction.

Financial penalties will be enforced on the main supplier for any non-conformances to Eskom or statutory SHE requirements, including those by sub-contractors or suppliers. Work stoppages initiated due to SHE-related issues do not entitle the supplier to any financial compensation claim against Eskom.

Mandatory compliance with the following when working at or rendering services to Eskom: Eskom Contractor Health and Safety Requirements Standard 32-136; the SHE specification provided; Occupational Health and Safety Act; Mine Health and Safety Act (where applicable); Compensation for Occupational Diseases and Illnesses Act; National Environmental Management Act. After contract award, the supplier must fully align its processes to Eskom's SHE requirements (policies, procedures, standards). All employees (contractors/suppliers) must undergo the relevant Eskom induction and the company's own induction.

The main supplier must demonstrate the process and selection criteria used when appointing contractors and suppliers; notify Eskom prior to any appointments; ensure appointed parties have adequate resources and competencies; remain accountable for their compliance with applicable legal and Eskom requirements; monitor them through audits and assessments; define grounds for termination of sub-contracted work; manage all non-conformances through performance and penalty processes; and accept that Eskom may verify compliance and request testimonials, references and client contact details for previous similar work.

Annexure Attached (Y /

N / n/a)

1.1.1 *Authorisation Form Annexure A Y

1.1.2 *Acknowledgement form Annexure B Y

1.1.3 *Tenderer’s particulars Annexure C Y

1.1.4 *Integrity Declaration Form (Suppliers are required to Annexure D Y

download and read the Supplier Integrity Pact. It is

accessible on the Eskom Tender Bulletin via Eskom

Supplier Integrity Pact (eskom.co.za) link)

1.1.5 *CPA Requirements for Local Goods/Services Annexure E Y

1.1.6 *CPA(IG) for Foreign Goods/Services (if applicable) Annexure F Y

1.1.7 SBD 6.2 Declaration Certificate for Local Production Annexure G1 Y

and Local Content (only applicable if designated

materials are included and then Tenderers will be

required to complete and submit Annexures G1 to

G4 as evidence of compliance with this

requirement).

Annexure C Local Content Declaration- Summary Annexure G2 Y

Schedule

Annexure D Imported Content Declaration – Supporting Annexure G3 Y

Schedule to Annexure C

Annexure E Local Content Declaration- Supporting Annexure G4 Y

Schedule to Annexure C

1.1.8 *SBD 1 Invitation to Bid must be filled out by all Annexure H Y

tenderers and submitted with the tender at tender

submission deadline

1.1.9 *

Issue date: 26 August 2026

Closing date and time: 28 September 2026 at 10h00

Tender validity period: 12 weeks from closing date and time

Clarification meeting / site visit (non-compulsory): 3 September 2026, 10h00–12h00, Outside Conference Room next to East Gate, Tutuka Power Station. Tenderers must confirm attendance with Eskom Representative (name, position, contact details of each attendee).

Clarification queries deadline: 7 working days before tender closing date (i.e., by 17 September 2026).

Alternative tenders: not allowed.

Eskom Representative (procurement): Bishop Chabalala

Telephone: 017 749 9607

Email: [email protected]

Fraud/corruption reporting: 0800 11 2722 / [email protected]

Submission address: Electronic via Eskom E-tendering portal (Eskom Tender Bulletin site).

Senior Advisor Procurement (signatory): Noma Zulu

Submission method: electronic only via the Eskom E-tendering portal (Eskom Tender Bulletin site). No hard copies accepted. No zip or compressed files. Each document must be in PDF format; the pricing schedule must also be provided in Excel. Upload size limit: 500 MB per document, 4 GB total. Documents must be uploaded under the folders Technical, Commercial, Financial, and Other. Submission status must show as complete. If a tender is resubmitted, only the latest version is accepted; previous submissions are void.

Mandatory returnables at closing (disqualifiable if missing or unsigned):

• Annexure A: Authorisation Form
• Annexure B: Acknowledgement Form
• Annexure C: Tenderer's Particulars
• Annexure D: Integrity Pact Declaration Form
• Annexure E: CPA Requirements for Local Goods/Services
• Annexure G1–G4: SBD 6.2 Declaration Certificate for Local Production and Content and supporting schedules
• Annexure H: SBD 1 Invitation to Bid
• Annexure J: SBD 4 Bidders Disclosure
• E-tendering Help Manual acknowledgement form
• Valid proof of CIDB grading 8ME or higher (main contractor; JV/sub-contractor as required)
• Completed NEC3 contract (with activity schedule) and pricing schedule/BOQ (PDF and Excel)
• CSD registration (CSD number/report)

Returnables at closing (non-disqualifiable; 5 working days to remedy if missing):

• Annexure I: SBD 6.1 Preference Points Claim Form (PPPFA 2022)
• Tax Evaluation Questionnaire (if applicable)
• Tax clearance certificate (foreign tenderers with SA footprint; local tenderers without SARS e-filing PIN/CSD profile)
• Employment Equity Act compliance proof (SA designated employers)
• COIDA certificate of good standing or proof of application (SA tenderers)
• SHEQ documents: acknowledgement of Eskom OHS rules (Annexure B), baseline OHS risk assessment, health and safety plan/OHS manual, competency evidence (first aider, OHS professional, incident investigator), valid letter of good standing, OHS policy, OHS costing breakdown
• Quality documents: ISO 9001:2015 certification evidence, QMS operation evidence, draft contract quality plan, draft quality control plan/ITP, Form A completed and signed
• Environmental: environmental management plan, identification of aspects and impacts, environmental/SHE/SHEQ policy signed by CEO/MD
• JV documents (if applicable): letter of intent, signed JV agreement with joint and several liability and profit-sharing ratios, confirmation of single business entity, designated JV bank account
• Additional documents: ECSA/SACPCMP registration, CVs, permits, licences, specific registrations per scope of work

Returnables required prior to contract award:

• CSD registration (mandatory contractual requirement)
• Financial viability evidence (financial statements; compulsory for CIDB-related transactions from R30 000 excl. VAT)
• Contract Skills Development Goals (CSDG) documentation: Form A2 Baseline Training Plan, Form A3 Project Interim Report, Form A4 Supervisor Agreement, Form A5 Project Completion Report
• Contract Participation Goals (CPG) documentation: Annexure A Targeted Enterprise Declaration Affidavit, project interim/completion reports and declaration
• Performance bond: tenderer must select at least two Eskom-approved financial institutions

Two-stage evaluation: functionality (technical) first, then price and specific goals (90/10).

Functionality criteria (threshold 70%):

• Ability to supply air heater element packs: ownership/lease of workshop, manufacturing equipment and tools (25%)
• Verifiable reference list of at least 3 previous purchase orders for supply of air heater element packs to Eskom or other companies within the last 5 years (25%)
• Ability to package and preserve air heater element packs for storage (20%)
• Lead times for delivery of first set from previous purchase order, with activity breakdown and durations (20%)
• Ability to carry out quality control in manufacturing and compile data books (10%)

Total technical criteria weight: 100%. Minimum weighted score: 70%. Tenderers below threshold are disqualified.

Price evaluation (90 points): prices inclusive of VAT, corrected for arithmetic errors, excluding contingencies, adjusted for variations/deviations, compared on Net Present Value basis using tendered programme, price adjustment factors, exchange fluctuations, and risk parameters. Unconditional discounts considered; conditional discounts not considered for evaluation but applied at payment.

Specific goals (10 points): scored per PPPFA 2022 regulations. Failure to submit evidence yields 0 points for that goal but does not disqualify.

Ranking: combined price (90) + specific goals (10) = total score; ranked highest to lowest.

Contractual requirements (CSD registration, SHEQ, financial viability, CSDG, CPG) are not evaluation criteria; assessed after ranking. Failure to meet them by stipulated deadlines may render tenderer non-responsive and ineligible for award.

Scope: Manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station.

Key technical requirements:

• Tenderer must own or lease a workshop with manufacturing equipment and tools suitable for producing air heater element packs.
• Must demonstrate at least 3 verifiable purchase orders for supply of air heater element packs to Eskom or other companies within the last 5 years.
• Must demonstrate ability to package and preserve element packs for storage.
• Must provide lead times for delivery of first set from previous purchase order, including activity breakdown with durations from purchase order placement.
• Must demonstrate quality control capability in manufacturing and ability to compile data books.
• Must comply with QM58 – Supplier Quality Management Specification and ISO 9001:2015 requirements.
• Must provide: valid ISO 9001:2015 certification (scope relevant, accredited body, valid expiry), documented QMS operation evidence (organisation chart, responsibility matrix, control of externally provided processes, internal audit report, certification audit report ≤12 months, management review records), draft contract quality plan specific to scope, draft quality control plan/ITP or example from similar work, completed Form A.
• Environmental requirements: environmental management plan addressing waste management (reduction, reuse, recycling, disposal), environmental induction, incident management, emergency planning; identification of environmental aspects and impacts with methodology; environmental/SHE/SHEQ policy signed by CEO/MD; signed acknowledgement of Eskom SHE rules (Annexure B).
• Health and safety requirements: COIDA certificate of good standing or proof of application; baseline OHS risk assessment (routine and non-routine tasks); health and safety plan/OHS manual aligned with scope; competency evidence for first aider, OHS professional, incident investigator; valid letter of good standing (COID/licensed insurer; if single employee, insurance covering accidental death/disability ≥R500 000); OHS policy; OHS costing breakdown in bill of quantities.
• Contract terms: NEC3 Engineering and Construction Contract (ECC) Option A (priced contract with activity schedule) with clauses W1, X1, X2, X5, X7, X13, X16, X18, X20, Z.
• Contract Skills Development Goals (CSDG) applicable: engineering and construction works contract, grade 8ME or higher, percentage per BOQ/pricing schedule.
• Contract Participation Goals (CPG) not applicable.
• Cataloguing applicable.
• Performance bond required (clause X13); tenderer must select at least two Eskom-approved financial institutions.
• Sectional completion (clause X5), delay damages (X7), retention (X16), limitation of liability (X18), key performance indicators (X20).

tenderer must select a minimum of two (2) financial institutions that it

is likely to approach from the list provided of Eskom-approved

financial institutions.

3.4 Tender Opening For E-tendering. There will be no public opening of tenders. Tenders

will be downloaded electronically.

3.5 Tender Prices Prices will not be read out.

3.9 Basic Compliance Basic compliance with this Invitation to Tender requires a tenderer to

meet all the following requirements:

work that has to be done, has the required

training, knowledge and experience, and, where

applicable, qualifications relevant to that work or

task. Provided that where appropriate

qualifications and training are registered in terms

Effective Date 07 April 2026

Review Date April 2031

Reference Returnable From Suppliers at at **

closing (Non- prior Award. required required closing. required Tender (disqualifiable)* Contract disqualifiable)

to Tender Returnable Returnable Returnable

of the provisions of the National Qualifications

qualifications and training must be regarded as

the required qualifications and training, and is

familiar with the Act and applicable regulations

made under the Act.

− First aider

− OHS professional

− Incident investigator

Tenderer to demonstrate ability 20%

to package and preserve the air

heater element packs for

storage.

Provide lead times for delivery 20%

of first set of air heater element

packs from previous purchase

order. This should include a

breakdown of activities (with

durations) to be carried out

from the time a purchase order

is placed.

Tenderer to demonstrate ability 10%

to carry out quality control in

manufacturing of air heater

element packs and to compile

data books.

Technical Criteria 100%

Threshold 70%

The minimum weighted final score (threshold) required for a tender to

be considered from a technical perspectives is 70%

SECTION A: Quality Management System

Requirements ISO 9001

(Option 1) Valid certification of Quality Management

A.1 Product / Service Scoping on ISO 9001 certificate

is defined and relevant

A.2 Certificate by Approved and Authorized

certification authority

A.3 Certification Authority has Recognized

Effective Date 07 April 2026

Review Date April 2031

Reference Returnable From Suppliers at at **

closing (Non- prior Award. required required closing. required Tender (disqualifiable)* Contract disqualifiable)

to Tender Returnable Returnable Returnable

and Responsibility matrix (must include but not limited

to quality management function/role)

(Clause 5.3 of ISO 9001:2015)

B.2 Documented information for Control of Externally

include criteria for evaluation, selection, monitoring of

performance, and re-evaluation of external providers

(Clause 8.4 of ISO 9001:2015)

B.3 Latest copy of an internal management system

audit report (with Nonconformity, Correction and/ or

Corrective Action Reports) - Report must include but

not limited to Objective, Scope, Criteria and outcomes

of the audit.

(Clause 9.2 of ISO 9001:2015)

B.4 Latest copy of a certification management system

audit report not older than 12 months (with

Reports)

B.5 Records of Management Review meetings

(minutes, attendance registers etc.)

SECTION C: Contract Quality Plan Requirements

(Ref 240-105658000 and 240-109253698)

work as described in the tender documents (Ref ISO

NB! Draft Contract/Project Quality Plan has

important QA deliverables

Effective Date 07 April 2026

Review Date April 2031

Reference Returnable From Suppliers at at **

closing (Non- prior Award. required required closing. required Tender (disqualifiable)* Contract disqualifiable)

to Tender Returnable Returnable Returnable

SECTION D: Quality Control Plan Requirements

(Ref 240-105658000 or 240-109253302)

QCP/Checklist/ ITP (Quality Control Plans) as per

Scope of Works (Ref ISO 10005)

NB! Draft/ Example of an Inspection and Test Plan

(ITP) or Quality Control Plan (QCP) on similar and/ or

previous work done

SECTION E: User defined additional

Requirements & miscellaneous (Ref 240-

E.1 Form A is completed and signed.

E.2 Add other requirements (if applicable) as per the

scope of work and/ or specification

Other safety/quality √

documents as

required per scope

of works

Environmental ENVIRONMENTAL REQUIREMENTS √

Effective Date 07 April 2026

Review Date April 2031

Number Description Annexure Attached (Y /

N / n/a)

1.1.19 NEC or other Contract Y

1.1.20 Pricing Schedule/BOQ (if not contained in Contract) Y

Goal, it will not be disqualified. However, it will be awarded 0 points

for that Specific Goal.

3.19 Ranking of tenders Tenderers will be ranked by applying the preferential point scoring for

the 90/10 system. Eskom will add the score from Pricing and Specific

Eskom must, within 21 working days from date when

contractors offer to perform a construction works contract is

accepted in writing, register and publish the award of all

contracts equal to or exceeding R10 M inclusive of VAT.

2.29 Contract Skills Development 1. The CSDG applicable to this tender is in terms of the Engineering

Goals (CSDG) is not and Construction Works contract with respect to the

applicable __________________ class of works or__________ class of works

[delete “or” where only one class of construction works is applicable]

and the applicable percentage is ___ % and is contained in the

relevant BOQ/Pricing schedule attached.

Or

following ways: -

by multiplying 150 against the total estimated contract value in the

relevant BOQ/Pricing schedule to derive the relevant hours required

in terms of this CSDG; or

by main contractor devolving its obligations required in terms of the

CSDG to respective sub-contractor; or

Pricing schedule Completed pricing schedule (if not already submitted √

in the NEC or other Contract).

Pricing format: completed pricing schedule/BOQ (PDF and Excel) submitted with tender. Prices inclusive of VAT. Tender validity: 12 weeks from closing.

Price evaluation adjustments: arithmetic error correction, exclusion of contingencies, adjustment for variations/deviations, Net Present Value comparison using tendered programme, price adjustment factors, exchange fluctuations, risk parameters. Unconditional discounts considered for evaluation; conditional discounts applied at payment only.

Payment terms: contracts below R50 million (incl. VAT) – payment within 30 days of receipt of undisputed invoice; contracts above R50 million – payment within 60 days.

Financial viability: submission of latest 18 months comparative financial statements required as contractual requirement (compulsory for CIDB-related transactions from R30 000 excl. VAT).

Performance security: performance bond required (NEC3 clause X13); tenderer must select at least two Eskom-approved financial institutions.

Retention: applicable (NEC3 clause X16).

Price adjustment for inflation: applicable (NEC3 clause X1).

Eskom reserves the right to negotiate with preferred bidders if tendered prices are not market-related.

Main contractors discouraged from subcontracting with subsidiaries; if done, must be declared in tender documents.

Eligibility:

• Tenderer (single company, JV, or consortium) must not be restricted by National Treasury, Eskom, or on Tender Defaulters list.
• No conflict of interest (common controlling partner/majority shareholder, or relationship enabling access to competitor information or influence).
• Tender must be signed by authorised person.
• Must not subcontract 100% of scope.
• JV/consortium agreement must state joint and several liability.
• Nationality: not from a country on international sanctions list.

Mandatory registrations and certifications:

• CSD registration (CSD number/report) – mandatory contractual requirement.
• CIDB contractor grading 8ME or higher (main contractor; JV/sub-contractor as required). Proof required at closing or within 21 working days if agreed with Employer.
• Tax compliance: SARS e-filing PIN for verification via CSD, or tax clearance certificate (foreign tenderers with SA footprint; local tenderers without PIN/CSD profile). Foreign suppliers with no SA footprint complete SBD 1 only.
• Employment Equity Act compliance proof (SA designated employers): proof of submission of EE report to Department of Labour.
• COIDA certificate of good standing or proof of application (SA tenderers). International bidders: equivalent registration or insurance covering accidental death/disability ≥R500 000 if single employee.
• ISO 9001:2015 certification (valid, accredited, relevant scope).
• SHEQ compliance: acknowledgement of Eskom OHS rules (Annexure B), baseline OHS risk assessment, health and safety plan, competency evidence, OHS policy, OHS costing.
• Environmental: environmental management plan, aspects/impacts identification, environmental policy signed by CEO/MD.
• Quality: QM58 and ISO 9001:2015 compliance, documented QMS evidence, draft contract quality plan, draft quality control plan/ITP.

Returnable forms (disqualifiable if missing at closing):

• Annexure A: Authorisation Form
• Annexure B: Acknowledgement Form
• Annexure C: Tenderer's Particulars
• Annexure D: Integrity Pact Declaration Form
• Annexure E: CPA Requirements for Local Goods/Services
• Annexure G1–G4: SBD 6.2 Local Production and Content Declaration and supporting schedules
• Annexure H: SBD 1 Invitation to Bid
• Annexure J: SBD 4 Bidders Disclosure
• E-tendering Help Manual acknowledgement form
• CIDB grading proof
• Completed NEC3 contract and pricing schedule

Returnable forms (non-disqualifiable; 5 working days to remedy):

• Annexure I: SBD 6.1 Preference Points Claim Form (PPPFA 2022)
• Tax Evaluation Questionnaire
• Tax clearance certificate (where applicable)
• Employment Equity proof
• COIDA certificate
• SHEQ, quality, environmental documents as above
• JV documents (if applicable)
• ECSA/SACPCMP/CVs/permits/licences/specific registrations per scope

Contractual requirements assessed after evaluation (must be met prior to award):

• CSD registration
• Financial viability (financial statements)
• SHEQ requirements
• CSDG documentation (Forms A2–A5)
• CPG documentation (Annexure A Targeted Enterprise Declaration, project reports)
• Performance bond arrangements

Effective Date 07 April 2026

Review Date April 2031

Number Description Annexure Attached (Y /

N / n/a)

1.1.13 Reverse e-auction process (if applicable) N/A

1.1.14 E-tendering Help Manual acknowledgement form Y

1.1.15 E-tendering Help Manual for supplier Y

1.1.16 CIDB Contract Skills Development Goals (CSDG) Y

(if applicable)

a) a contract of R5 million or more, in the case of a

professional service or service contract or an order

issued in terms of such a contract; or

b) a CIDB grading designation of grade 8ME or higher,

in case of an engineering and construction works, or

design and build contract or an order issued in terms of

such a contract.

1.1.17 Contract Participation Goals (CPG) N/A

(if applicable)

[Note that the requirements of a contract participation

goal relating to the engagement of targeted enterprises

as established in the aforesaid standard applies to:

(a) construction works contracts in the General Building

(GB) and to Civil Engineering (CE) classes of

construction works;

(b) construction works contracts of an estimated

minimum project duration of 6 months; and

(c) construction works contracts in which at least 25%

of the main contract could reasonably be expected to

be subcontracted out in one or more of the following

applicable:

• SHEQ requirements; and/or
• Financial viability (submission of financial statements) /

(financial analysis is compulsory as a contractual requirement

for CIDB-related transactions from R30 000 excluding VAT);

and/or

• Any other as may be stipulated.

(Annexure A-Targeted Enterprise Declaration Affidavit; Project Interim

Report, Project Completion Report and Declaration) that may be

required as returnables after contract award and as stipulated by

Clause 3.3 of the Standard for Indirect Targeting for Enterprise

Development through Construction Works Contract (published in GN

1779, Government Gazette No. April 2023)

2.28 CIDB Requirements (where CIDB Requirements are applicable

applicable for Engineering and

Construction Works Contracts) 1. It is estimated that tenderers must have a Construction

Industry Development Board (CIDB) contractor grading of

through Infrastructure contracts (published in GN 1779,

Government Gazette No. April 2023)

a framework agreement that has a duration of 12 months or

more, and to:

a) contract of R5 million or more, in the case of a professional

service or service contract or an order issued in terms of

such a contract; or

b) a cidb grading designation of grade 8ME or higher, in case

of an engineering and construction works, or design and

build contract or an order issued in terms of such a

contract].

2.30 Contract Participation Goals is Contractor shall achieve in the performance of the contract the

not applicable Contract Participation Goals (CPG) relating to the engagement

of targeted enterprises as established in the CIDB Standard for

Construction Works Contract (published in Government

Gazette No. February 2013)

the engagement of targeted enterprises as established in the

aforesaid standard applies to:

a) construction works contracts in the General Building (GB)

and to Civil Engineering (CE) classes of construction

works;

b) construction works contracts of an estimated minimum

project duration of 6 months; and

c) construction works contracts in which at least 25% of the

main contract could reasonably be expected to be sub-

contracted out in one or more of the following CIDB

classes of construction works:

• Mechanical Engineering (ME)

Safety COIDA - Original certificate of good standing or proof √

of application issued by the Compensation Fund

(COID) or a licensed compensation insurer (South

African tenderers only)

1. Acknowledgement of Eskom’s OHS rules and

requirements (Annexure B)- Ensure that all

applicable rules and requirements are referenced

in this form in order for the supplier to

acknowledge and comply with them. Ensure that

this completed form is included in the enquiry

procurement package. To be signed and

submitted by the tenderer.

routine and non-routine tasks.

3. Health and Safety plan/OHS manual (must

address the scope of work OHS risk(s) and

aligned with the health and safety specification or

requirements)

have or may have an impact on the environment. The

methodology used must be provided together with the

identified activities that have been identified, based

on the scope of work, that have an impact on the

environment and the controls that will be in place in

contract execution.

4. Environmental (or SHE/SHEQ) policy signed by

minimum:

• Waste management (reduction, re-use,

recycling, disposal).

• Environmental induction.
• Environmental incident management.
• Emergency planning for environmental

incidents.

Commitment to: (1) compliance to environmental

compliance obligations; and (2) environmental duty of

care.

Due

• In order for the Finance to be able to perform √

sanctions list. A tenderer shall be found to have the nationality

of a country if the tenderer is a national or is constituted,

incorporated, or registered and operates in conformity with the

provisions of the laws of that country. This criterion shall also

apply to the determination of the nationality of proposed

subcontractors or suppliers for any part of the Contract including

related services.

2. Tenderers submit more than one [tender/proposal] either

individually or as a partner in a joint venture (JV) or consortium,

except on an E-Tendering system where there is a limit size

(The upload size per document is 500 megabytes and total

submission is restricted to 4 gigabytes).

W1- Dispute resolution procedure

X1 - Price adjustment for inflation

X2 - Changes in the law

X5 - Sectional Completion

X7 - Delay damages

X13 - Performance bond

X16 - Retention

X18 - Limitation of liability

X20 – Key performance indicators

Z – Additional conditions of contract

The recommended supplier shall submit all the documentation (Form

A2 Baseline Training Plan, Form A3 Project Interim Report, Form A4

Supervisor Agreement, Form A5 Project Completion Report) that may

be required as returnables after contract award as stipulated by

Clause 4 of the Contract Skills Development Goals Standard

published in GGN 36760 of March 2020.

submitting tenders and concluding contracts with Eskom:

For contracts valued below R50 000 000 (Fifty Million Rand) including VAT, Eskom is committed to paying

Suppliers within 30 days of receipt of undisputed invoices.

For contracts valued above R50 000 000 (Fifty Million Rand) including VAT, Eskom is committed to paying

suppliers within 60 days of receipt of undisputed invoices.

the Compensation Commissioner (COID) or a

licenced mutual company or an equivalent of it

(for international bidders). If a company has only

one employee (CEO, owner), the supplier shall

submit an insurance letter that covers accidental

death and disability to the value of R500 000 as a

minimum.

1.1.9 *SBD 6.1 Preference Points Claim Form in terms of Annexure I Y

PPPFA 2022 regulations

1.1.11 Tax Evaluation questionnaire to determine whether a Y

3.13 Functionality requirements Functionality requirements are applicable

functionality criteria

to carry out quality control in

Threshold 70%

The minimum weighted final score (threshold) required for a tender to

be considered from a technical perspectives is 70%

Tenderers who do not meet the threshold for functionality scoring will

3.15 Evaluation of

evaluation purposes but will be implemented when payment is

Prices will be scored out of 90 points

3.18 Evaluation of Specific Goals Specific goals will be scored out of 10 points in accordance with the

If a tenderer fails to submit evidence of its points claim for a Specific

Goal, it will not be disqualified. However, it will be awarded 0 points

the 90/10 system. Eskom will add the score from Pricing and Specific

Contractual Requirements are not evaluation criteria. They will

be assessed after the evaluation and ranking of the tenders.

3.15 Evaluation of Price Prices will be evaluated as follows

evaluation parameters relating to uncertainty and risk, where

6. Unconditional discounts will be taken into account for evaluation

Closing date and time: 28 September 2026 at 10:00 (from tender record).

No compulsory briefing session, site visit or clarification deadline is mentioned in this document.

Fraud and corruption reporting (anonymous): 0800 11 2722 or [email protected].

No SCM or technical enquiry contacts are provided in this document.

Returnable forms — all must be completed, signed and submitted with the tender:

• SBD 4 (Tenderer's Disclosure): discloses whether any director, trustee, shareholder, member, partner or person with a controlling interest is employed by the state, has a relationship with anyone employed by Eskom, or holds an interest in any other related enterprise. A false declaration disqualifies the tender.
• SBD 9 (Certificate of Independent Bid Determination) is referenced in the declaration clauses and must also be completed.
• Proof of CSD registration and a valid SARS tax compliance status PIN.

Disqualification risks:

• Any returnable form left unsigned or omitted.
• Tenderers or their controlling persons listed on the Register for Tender Defaulters or the List of Restricted Suppliers are automatically disqualified.
• Tenders received after the closing time, regardless of reason.

Mandatory pre-qualification:

• Tenderer and all directors, trustees, shareholders, members, partners or persons with a controlling interest must not appear on the National Treasury Register for Tender Defaulters or the List of Restricted Suppliers.
• Full disclosure of state employment, relationships with Eskom employees, and interests in other related enterprises is required.
• Tenderer must certify the bid was prepared independently, without consultation, communication, agreement or arrangement with any competitor regarding quality, quantity, specifications, prices, methods, factors or formulas used to calculate prices, market allocation, intention to submit or not submit, or delivery particulars.
• No consultations, communications, agreements or arrangements with any Eskom official in relation to this procurement process except for clarification required by Eskom; tenderer must not have been involved in drafting the specifications or terms of reference.
• Suspicious tenders will be reported to the Competition Commission (section 59 of the Competition Act) and may be reported to the NPA; tenderer may be restricted from conducting business with the public sector for up to 10 years under the Prevention and Combating of Corrupt Activities Act.

No functionality, price/preference split or minimum qualifying scores are stated in this document.

Supply chain management system should this

Declaration prove to be false.

.............................. .....................................................

Signature Date

.............................. ......................................................

Position Name of bidder

Controlled Disclosure

Anonymously report fraud, corruption a

Mandatory compliance:

• CSD registration.
• Valid SARS tax compliance status PIN.
• B-BBEE certificate or sworn affidavit (for preference points under SBD 6.1, referenced in declaration).
• SBD 4 (Tenderer's Disclosure) — completed and signed.
• SBD 9 (Certificate of Independent Bid Determination) — completed and signed.
• No CIDB grading, professional-body registration or local-content percentage is specified in this document.

{"closingDate":"31 May 2024"}

{"name":null,"email":"[email protected]","phone":null,"department":null,"address":"note specifying the means of transport, weight, number or volume as appropriate and"}

Supplier must accept Eskom General Conditions of Purchase. Must be registered on the Central Supplier Database (CSD) and possess a valid SARS tax clearance certificate or tax compliance status pin. Must comply with all statutory requirements under South African law. No specific CIDB grading, B-BBEE level, or local content percentage is stated in the provided document.

supply the goods or

execute the works

Quality and rejection provisions:

• Eskom may inspect and/or test goods, works, services and workmanship at any stage.
• Deemed acceptance if Eskom fails to notify rejection.
• Rejection: Eskom may reject any part of goods by written notice stating reason and whether replacement or re-work is required.
• Rejected goods returned at Supplier's risk and expense; Supplier bears costs of replacement procurement.
• For works/services: Supplier must correct non-conformances/defects as indicated; delay allows Eskom to engage third party at Supplier's cost.

Pricing and payment terms:

• Prices/rates may include price-adjustment amount calculated per formula stated in the agreement.
• Payment in any currency; single exchange rate used for conversion to ZAR; non-ZAR payments not to exceed agreed amounts.
• Supplier must complete Eskom CPA (IG) form.
• Payment within 30 days of receipt of correct tax invoice.
• Eskom VAT registration number 4740101508 must appear on tax invoice (effective 1 June 2004).
• Delivery cost: Supplier must state in tender whether included; deemed included if not stated.
• No payment for containers/packing materials unless agreement states otherwise.
• No payment if goods/services/works not provided as per agreement.

General: Eskom conducts tender process fairly, equitably, transparently, competitively, cost-effectively. Eskom Representative and tenderers act timeously and ethically. Interpretation: Terms in italics vary per tender; details in Tender Data. Tender Documents: Invitation to Tender documents comprise Invitation to Tender documents (including annexures) and/or additional requirements in Tender Data. Documents required from tenderer may form part of contract if stated in Tender Data. Standard Conditions of Tender and Tender Data do not form part of any contract. Type of Invitation: Open tenders advertised on Eskom Tender Bulletin and NT e-Tender Portal; closed tenders sent directly to identified tenderers; sole/single source per Eskom Procurement Procedure 32-1034. Addenda published/issued same way as original Invitation. Eskom's Rights: May accept/reject any variation, deviation, alternative tender; accept whole or part of tender; cancel tender at any time before contract conclusion with written reasons; abandon proposed goods/work/services, perform otherwise, or re-issue similar invitation. Eskom and related parties not liable for losses/claims/damages from participation, amendment, termination, suspension, or exclusion. Eskom's Right to Negotiate: Reserves right to enter mandated negotiations with selected tenderer(s) per approved procurement policies. Disclaimer: Eskom takes reasonable measures for accuracy but makes no representations/warranties express/implied; disclaims all liability for accuracy/completeness of tender document information.

{"closingTime":"2.2","briefingSession":"{"date":null,"time":null,"venue":"tend a site visit and/or clarification meeting that is stipulated as being","is_compulsory":true}"}

Site visit and/or clarification meeting: Tenderers must attend if stipulated as compulsory; failure to attend results in disqualification. Details stated in Tender Data. Tenderers entitled to ask questions for clarity during site visit or clarification meeting.

{"name":null,"email":null,"phone":null,"department":"Supply Chain Management","address":"g time 2.2 Ensure that Eskom has received the complete original tender and one (1) complete hard"}

Mandatory tender returnables must be submitted by closing date and time for evaluation purposes; returnables required for contract award must be submitted before contract award. All documents returned (including forms, data, schedules) must be completed without exception. Certificates, documents, proof of registration must be valid, current, and original where stipulated, for the entire tender validity period. Acknowledgement Form must be completed and submitted with the tender, stating if tender is for whole or part of works/services/supply. Proof of authority to act as agent (authenticated copy) must be submitted as a tender returnable where an agent submits on behalf of a principal. B-BBEE certificate/affidavit/CSD report must be provided at closing if B-BBEE level is a pre-qualification criterion. Sub-contractors' B-BBEE status and CSD number/certificate/affidavit must be provided at closing if sub-contracting to designated groups is a pre-qualification criterion. Designated materials and thresholds information must be submitted no later than contract award. Cataloguing information per item may be required after contract award; pricing schedule must include a line item for cataloguing if required.

Tenderers must be eligible to do business with Eskom and State-Owned Companies, registered on the CSD, and not restricted from public procurement. A valid B-BBEE certificate or affidavit is required at closing if B-BBEE is a pre-qualification criterion; otherwise, failure to provide it results in zero PPPFA points but not disqualification. CIDB registration (or proof of application) at the stipulated grading is mandatory at closing if required by the Tender Data. Tenderers must submit all mandatory returnable documents by the closing date and time, including the Acknowledgement Form, SDL&I Undertaking (by contract award), proof of authority to sign, and designated materials information (by contract award). Compliance with tax, SHEQ, and local content requirements is mandatory. Any misrepresentation or falsification of documents leads to disqualification, reporting to the B-BBEE Commission, and potential suspension from state business for up to 10 years.

Supply Chain

Management Procedure 32-1034. Any addenda to an issued Invitation to Tender will be

published or issued in the same way as the Invitation to Tender was and will form part of the

Invitation to Tender documents.

Communication 1.5 Every communication between Eskom and a tenderer shall be made to or from the Eskom

Representative only, in w

of a tenderer.

Cost of tendering 2.6 Accept that Eskom will not compensate the tenderer for any costs incurred in the preparation

and submission of a tender, including the costs of any testing necessary to demonstrate that

aspects of the tender satisfy the evaluation criteria, or the negotiation of any contract.

Submitting a tender 2.7 Check the Invitation to Tender documents on receipt and notify the Eskom representative of

any discrepancy or omitted documents. The Acknowledgement Form must be completed

and submitted with the tender and must clearly state if the tender is for the whole or part of

the works, services or supply identified in the specification and/or works information by

reasonable time for tenderers to make consequential adjustments to their tenders before

the closing date and time for submission.

In writing’ means hand-written, typed, type-written, printed or electronically made, and that

results in a permanent record.

Insurance 2.17 The extent (if any) of insurance provided by Eskom may not be for the full cover required in

the conditions of contract. The tenderer is advised to seek qualified advice regarding

insurance.

Pricing the tender 2.18 Include in the rates, prices, and the tendered total of the Prices all duties, taxes (including

VAT), and other levies payable by the tenderer if successful. Such duties, taxes and levies

are those applicable 14 (fourteen) days prior to the closing date and time for tender

submission.

2.19 Provide rates and Prices that are fixed for the duration of the contract and are not subject to

contract price adjustment except as provided for in the Invitation to Tender.

2.20 State the rates and Prices in South African Rand unless instructed otherwise in the Invitation

to Tender. The selected conditions of contract may provide for part payment in other

currencies. Therefore, submit Rates/Prices in Rands in accordance with the exchange rate

and base date as stipulated in the Invitation to tender.

Alterations to 2.21 May not make any alterations or additions to the tender documents, other than for purposes

documents of complying with instructions issued by the Eskom Representative or if necessary to correct

errors made by the tenderer. All such alterations shall be initialed by all signatories to the

tender. Corrections may not be made using correction fluid, correction tape or the like.

Alternative tenders 2.22 Submit alternative tenders only if a main tender is also submitted, and only if the submission

of alternative tenders is permitted by the Invitation to Tender. Accept that an alternative

tender may be based only on the criteria stated in the Tender Data.

Clarification and 2.23 Provide clarification and documents as may be required by the Eskom Representative

correction of Prices during the evaluation of tenders. However, documents identified as mandatory tender

after tender returnables that are required to be submitted at the closing date and time for tender

submission submission will not be requested and may not be submitted after the closing date and time.

phases, as this is regarded as ‘double dipping’.

Designated 3.12 Tenderers are also required to submit information on designated material and

materials and thresholds no later than contract award. If this information is not completed and

thresholds submitted as indicated in the Invitation to Tender, your tender will not be considered for

contract award

Functionality 3.13 If functionality is a criterion, tenderers will be scored against the functionality criteria and

requirements will be required meet the minimum threshold stated in the Tender Data to proceed to

further evaluation.

Financial analysis 3.14 Eskom has to determine the risk of doing business with a supplier who may pose a

(if applicable) financial risk to Eskom in the execution of the contract. During evaluation of a tenderer’s

financial statements, Eskom will attempt to identify mitigating factors or requirements for

the tenderer to meet, if such factors/requirements exist in the tender’s context. However,

should suitable mitigating factors not exist in the tender’s context or should mitigating

factors exist but be insufficient or if the risk is considered to be too high or should the

tenderer not agree with the mitigating factors, the tenderer will not be considered for

award.

Evaluation of Price 3.15 Evaluate the Price in accordance with the criteria/requirements in the Tender Data. Factors

such as CPA, FOREX, commodity exposure, unconditional discounts, technical

adjustment, PV and forecasted rates of invoicing are taken into account when determining

the evaluation Price.

Arithmetical errors 3.16 Check responsive tenders for arithmetical errors. If there is a discrepancy between an

amount in figures and the amount in words, the amount in words shall prevail.

Check the highest-ranked tenders for the following errors or omissions: -

(a) the misplacement of the decimal point in any unit rate; or

(b) omissions in completing the pricing schedule or bill of quantities, or

(c) arithmetical errors in line-item totals that are the result of the incorrect multiplication

of a unit rate and a quantity in a bill of quantities or schedule of prices; or

(d) arithmetical errors that are the result of the incorrect addition of the prices.

will request the tenderer to either confirm the prices as tendered or to accept the

corrected prices.

Where the tenderer elects to confirm the prices as tendered; Eskom will correct the error

as follows: -

(a) If a bill of quantities or pricing schedule applies and there is an error in the line-item

total that is the result of an error in multiplying the unit rate and the quantity, the line-

item total shall prevail, and the rate shall be corrected.

(b) Where there is a misplacement of the decimal point in the unit rate, the line-item total

as quoted shall prevail, and the unit rate shall be corrected.

(c) Where there is an error in the total of the prices that is the result either of other

corrections required by the checking process or in the tenderer’s addition of prices,

the total of the prices shall prevail, and the tenderer shall be asked to revise the

selected item prices (and their rates if a bill of quantities applies) to result in the

tendered total of the prices.

documentation by closing date and time of tender submission, the tenderer will not be

disqualified if otherwise evaluated as acceptable in all other criteria; however, the tenderer

will score zero points for Specific Goals within the 90/10 or 80/20 allocation of points.

Ranking of tenders 3.19 According to the PPPFA, Eskom will add the score for Pricing and the Specific Goals

together and rank the suppliers from the highest to the lowest.

Objective criteria 3.20 A contract may be awarded to a tenderer that did not score the highest points only in

accordance with Section 2(1) (f) of the Preferential Procurement Policy Framework Act,

2000. If Eskom intends to apply Objective Criteria envisaged in section 2(1)(f), Eskom

must stipulate the Objective Criteria in the Invitation to Tender. Functionality and any

element of the B-BBEE scorecard may not be used as Objective Criteria.

CSD report or as per certificate/affidavit provided

CSD number/CSD report) must be provided at the closing date and time for

CSD number or B-BBEE certificate/affidavit will need to be

B-BBEE Details: kom Representative and

Agreement to sign the contract documents.

Proof of authority 2.25 Where an agent submits a tender on behalf of a principal, an authenticated copy of the

to act as agent authority to act as an agent of the tenderer must be submitted as a tender returnable.

Compliance with 2.26 Comply with relevant legislation and regulatory instruments such as Instruction Notes issued

relevant legislation by National Treasury, CIDB Regulations for construction works; materials designated for local

(NT instructions, content and/or production by the dtic, PPPFA Regulations; Amended B-BBEE Codes, COIDA;

CIDB, PPPFA etc) OHS Act; Eskom’s requirements for Safety, Health, Environment and Quality (SHEQ) and any other

applicable legislation or regulatory instruments indicated in the Invitation to Tender.

Proof of Safety, 2.27 Tenderers are required to provide proof to the satisfaction of Eskom that safety, health,

Health, environmental and quality (SHEQ) systems, policies and capabilities are in place at the

Environment and closing date and time for tender submission stipulated in the Invitation to Tender and/or

Quality Contract Award. All costs and personnel associated with SHEQ must be reflected in the

requirements tender.

CIDB 2.28 Where the Tender Data has stipulated CIDB grading/s as a qualification criterion, tenderers

are required to be registered with the Construction Industry Development Board at the

closing date and time for submission of tenders or to be capable of being so registered

within twenty-one (21) working days from the closing date and time for submission of

tenders.

Where CIDB is applicable; proof of registration on CIDB is mandatory at the closing date

and time for tender submission. Should this not be received as stipulated

tenderers that Eskom has identified. A sole source and a single source are regarded as a

tenderer that meets the requirements stated in the Eskom Procurement and Supply Chain

Management Procedure 32-1034. Any addenda to an issued Invitation to Tender will be

published or issued in the same way as the Invitation to Tender was and will form part of the

Proof of authority 2.25 Where an agent submits a tender on behalf of a principal, an authenticated copy of the

to act as agent authority to act as an agent of the tenderer must be submitted as a tender returnable.

Compliance with 2.26 Comply with relevant legislation and regulatory instruments such as Instruction Notes issued

relevant legislation by National Treasury, CIDB Regulations for construction works; materials designated for local

(NT instructions, content and/or production by the dtic, PPPFA Regulations; Amended B-BBEE Codes, COIDA;

CIDB, PPPFA etc) OHS Act; Eskom’s requirements for Safety, Health, Environment and Quality (SHEQ) and any other

applicable legislation or regulatory instruments indicated in the Invitation to Tender.

Proof of Safety, 2.27 Tenderers are required to provide proof to the satisfaction of Eskom that safety, health,

Health, environmental and quality (SHEQ) systems, policies and capabilities are in place at the

requirements tender.

CIDB 2.28 Where the Tender Data has stipulated CIDB grading/s as a qualification criterion, tenderers

are required to be registered with the Construction Industry Development Board at the

closing date and time for submission of tenders or to be capable of being so registered

within twenty-one (21) working days from the closing date and time for submission of

tenders.

Where CIDB is applicable; proof of registration on CIDB is mandatory at the closing date

and time for tender submission. Should this not be received as stipulated in the Invitation to

Tender; the tender will be disqualified. However, in the event that, at the closing date and

time for tender submission, only proof of application for registration on CIDB is available,

then this must be submitted by the closing date and time for tender submission, while the

actual proof of CIDB registration (printout from CIDB database) must be submitted by

contract award

Contract Skills 2.29 If the tenderer is awarded a contract, it, as Contractor, shall achieve in the performance of

Development Goal the contract the Contract Skills Development Goals (CSDG) established in the CIDB

(CSDG) Standard for Developing Skills through Infrastructure Contract (published in GN 1779,

Government Gazette No. April 2023)

that has a duration of 12 months or more, and to:

a contract of R5 million or more, in the case of a professional service or service contract

or an order issued in terms of such a contract; or

a CIDB grading designation of grade 7 or higher, in case of an engineering and

construction works, or design and build contract or an order issued in terms of such a

contract.

Contract 2.30 The Contractor shall achieve in the performance of the contract the Contract Participation

Participation Goals Goals (CPG) relating to the engagement of targeted enterprises as established in the CIDB

(CPG) standard for indirect targeting for enterprise development through Construction works

contracts (published in Government Gazette No. February 2013).

enterprises as established in the aforesaid standard applies to:

construction works contracts in the General Building (GB) and to Civil Engineering (CE)

classes of construction works;

construction works contracts of an estimated minimum project duration of 6 months; and

construction works contracts in which at least 25% of the main contract could reasonably

be expected to be subcontracted out in one or more of the following CIDB classes of

construction works:

Civil Engineering (CE)

Electrical Engineering Work (EB)

) General Building Works (GB)

) Mechanical Engineering (ME)

2.31 Eskom may disqualify a tender if it is found that the tenderer has misrepresented or

falsified any information, certificate, affidavit or document. Eskom will report any fraud

in relation to a tenderer’s B-BBEE certificate/affidavit, or evidence of ‘fronting’ as

defined in the B-BBEE Act , as amended, to the B-BBEE Commission. The

tenderer will be suspended from business with any State-Owned Company for up to 10

years and may even be sentenced to jail.

2.32 Tenderers are also required to complete fully and submit the SDL&I Undertaking

(annexure to the Invitation to Tender) by no later than contract award. If the SDL&I

Respond 3.1 Respond to a request for clarification that Eskom receives before the closing date for

clarification clarification or queries. Eskom’s responses will be published to all tenderers in the same

manner the Invitation to Tender documents were issued. It is the tenderers’ responsibility

to check the Eskom Tender Bulletin and NT e-Tender Portal regularly for updated

responses to clarifications.

Issue Addenda 3.2 If necessary and prior to the closing date and time for tender submission, amend, amplify, or

add to the Invitation to Tender documents by way of Addenda published in the same

platform that the Invitation to Tender was issued. It is the tenderers’ responsibility to

check the Eskom Tender Bulletin and NT e-Tender Portal regularly for Addenda.

electronically. The Eskom Representative will publish the names of all tenderers received

on the Eskom Tender Bulletin and NT e-Tender Portal.

Tender Prices 3.5 Eskom will announce the names of the tenderers. Prices may be announced if so, stated

in the Tender Data.

Non-disclosure 3.6 Unless required by law, Eskom will not disclose information relating to the evaluation and

comparison of tenders and recommendations for the award of a contract to tenderers or to

any other person not officially concerned with the tender process until after the tender

award.

Grounds for 3.7 Reject a tender if Eskom establishes that there is proof that the tenderer influenced the

rejection processing of tenders or the awarding of the contract, the existence of collusion and/or bid

rigging, and/or that the tenderer has participated in any fraudulent/illegal activity in

connection with the Invitation to Tender.

Clarification of a 3.8 Obtain clarification from a tenderer in respect of any matter in the tender that may not be

tender clear or that could give rise to ambiguity in a contract arising from this tender if the matter

were not to be clarified. A document that the Invitation to Tender identifies as a mandatory

tender returnable that is required to be submitted at the closing date and time for tender

submission will not be requested, but Eskom may seek clarity on it.

may utilise reverse e-auction in certain Enquiries. Where reverse e-auction will be utilised,

this will be indicated in the respective Invitation to Tender and the reverse e-auction

supporting documents will be issued in the Invitation to Tender. Tenderers will be required

to submit a complete tender that does not contain Prices. If a tenderer has included prices

in its tender, the prices will not be considered.

Acceptance of 3.22 Notify Eskom's acceptance to the successful tender before the expiry of the validity period

tender or agreed additional validity period. Inform the successful and unsuccessful tenderers only

once approval has been granted by the Eskom Adjudication Authority. For open tenders,

this notification must be published on the Eskom Tender Bulletin and NT e-Tender Portal

Prepare contract 3.23 Revise the contract documents issued by Eskom in the Invitation to Tender documents to

documents take account of:

 Addenda issued during the tender period;

 inclusion of returnables stipulated in the Invitation to Tender;

 inclusion of changes agreed in contract negotiations; and

 Other revisions or documents agreed to between Eskom and the successful

tenderer during negotiations,

Sign Form of 3.24 Arrange for authorised signatories of both parties to complete and sign the original and one

including the Eskom Representative shall not be liable for any losses, claims or damages of

whatsoever nature or howsoever arising that may be sustained by a tenderer or any other

person as a result of its participation in the tender or from any amendment, termination or

suspension of the process set out in the Invitation to Tender or from its exclusion from

participating in the tender process at any point.

Eskom’s right to 1.7 Eskom reserves the right to enter into mandated negotiations with any, one or more selected

negotiate tenderer(s) in accordance with Eskom’s approved procurement policies and procedures.

240-62044728 Rev 12 Eskom Standard Identifier

Conditions of Tender Effective Date 01 February 2025

Review Date January 2030

Disclaimer 1.8 While Eskom takes all reasonable measures to ensure that all information contained in the

regarding accuracy tender documents is correct and complete, Eskom does not, however, make any

of tender representations or warranties, express or implied, as to the accuracy or completeness of

documents such information and Eskom expressly disclaims any, and all liability for such

representations, warranties or statements.

Tenderer’s 2. The tenderer shall comply with the following obligations when submitting a tender and shall:

Tender validity 2.12 Hold the tender(s) valid for acceptance by Eskom at any time within the validity period after

the closing date and time for tender submission. Extend the validity period for a specified

additional period if Eskom requests the tenderer to do so. A tenderer that agrees to extend

the validity of its tender will not be required or permitted to modify its tender. A tenderer that

does not agree to extend the validity of its tender will be excluded from further

consideration. Tenderers will be requested to extend the validity of their tenders until a

contract(s) have been concluded with one or more tenderers. A request that a tenderer

extend the validity of its tender is not a representation that the tender is an acceptable

tender or that Eskom will seek to negotiate or conclude a contract with the tenderer. If the

validity of tenders expires before contracts have been concluded, the procurement process

is deemed to have concluded without an award.

Confidentiality and 2. 13 Treat as confidential all matters that arise in connection with the procurement. Use and copy

copyright of the documents provided by Eskom only for the purpose of preparing and submitting a tender

documents in response to this Invitation to Tender.

Standardised 2.14 Obtain and familiarise themselves with, if required for the purposes of submitting a tender,

specifications and the latest revision of standardised specifications and/or other documents that have been

other publications incorporated by reference into the Invitation to Tender documents by reference.

Site visit and / or 2.15 Tenderers must attend a site visit and/or clarification meeting that is stipulated as being

clarification compulsory in order to familiarise themselves with the proposed work, services, supply,

meeting location or similar. Failure to attend a clarification meeting or site visit that is identified as

compulsory will result in disqualification from participation.

Details of the meeting(s) are stated in the Tender Data. Tenderers are entitled to ask

correction of errors as required above.

Evaluation of 3.17 Score the B-BBEE level as stated on the CSD report or as per certificate/affidavit provided.

B-BBEE If the B-BBEE level is a pre-qualification criterion; then the proof of the B-BBEE level

(certificate/CSD number/CSD report) must be provided at the closing date and time for

tender submission; or the tender will be disqualified. If sub-contracting to designated groups

pre-qualification criteria are utilized (selected/mandatory) in terms of the PPPFA

Regulation, then Eskom will apply the PPPFA requirements for sub-contractors’ B-BBEE

status and the sub-contractors’ CSD number or B-BBEE certificate/affidavit will need to be

provided at the closing date and time for tender submission. Should the

information/documents provided indicate that the level is in dispute (fraudulent/ expired)

then the tender will be disqualified.

However, for the purposes of PPPFA point allocation: if no B-BBEE certificate/affidavit is

provided at Tender closing date and time for tender submission, or the

information/documents provided are fraudulent or have expired; then the tenderer will not

be disqualified (if otherwise deemed to be responsive and acceptable in all other aspects)

but will score zero under PPPFA point allocation.

Evaluation of 3.18 Score the Specific Goals with reference to the supporting documentation in the tender. If a

Eskom's Obligations: Respond to clarification requests before closing; responses published to all tenderers same manner as Invitation; tenderers responsible for checking Bulletin/Portal. Issue Addenda: Amend/amplify/add to Invitation via Addenda published on same platform; tenderers responsible for checking; extension may be granted if requested. Return Late Tenders: Return unopened; deemed late if not in designated box/date/time; e-tendering system prevents late submission. Tender Opening: Open in presence of tenderers' representatives at time/place in Tender Data; withdrawn tenders not opened. E-tendering: No public opening; downloaded electronically; names published on Bulletin/Portal. Tender Prices: Names announced; prices announced if stated in Tender Data. Non-disclosure: Evaluation/comparison/recommendation information not disclosed until after award unless required by law. Grounds for Rejection: Reject if proof of influencing processing/award, collusion/bid rigging, fraudulent/illegal activity. Clarification of Tender: Obtain clarification on unclear/ambiguous matters; mandatory returnables not requested but clarity may be sought. Prepare Contract Documents: Revise contract documents to account for Addenda, stipulated returnables, negotiated changes, other agreed revisions. Sign Form of Agreement: Arrange authorised signatories to complete and sign original and one copy.

Eligibility: Tenderers must comply with eligibility criteria stated in the Tender Data and not be under any restriction to do business with Eskom or State-Owned Companies. Tenderers are not permitted to sub-contract 100% of the scope of work (SOW); any tender based on 100% sub-contracting will be deemed ineligible and disqualified. CIDB: Where CIDB grading is stipulated, tenderers must be registered with the Construction Industry Development Board at closing date and time, or capable of being registered within 21 working days. Proof of CIDB registration is mandatory at closing; if only proof of application is available, it must be submitted at closing and actual proof of registration by contract award. Contract Skills Development Goals (CSDG): Applicable to contracts of R5 million or more for professional/service contracts, or CIDB grade 7 or higher for engineering/construction works, with duration of 12 months or more. Contract Participation Goals (CPG): Applicable to construction works contracts in General Building (GB) and Civil Engineering (CE) classes, estimated minimum project duration of 6 months, and where at least 25% of the main contract could reasonably be subcontracted in CE, EB, GB, or ME classes. Compliance with relevant legislation: NT Instruction Notes, CIDB Regulations, designated local content/materials by dtic, PPPFA Regulations, Amended B-BBEE Codes, COIDA, OHS Act, Eskom SHEQ requirements. Proof of SHEQ systems, policies and capabilities must be provided at closing date and/or contract award. SDL&I Undertaking must be completed and submitted by contract award. Security for Performance: Tenderer must indicate names of at least two financial institutions likely to be approached for performance security; Eskom reserves the right to reject unsuitable institutions.

are submitted and accessible for downloading/evaluation without any challenges as well as

It must be noted that Eskom will not measure a criterion twice in the different evaluation

Functionality 3.13 If functionality is a criterion, tenderers will be scored against the functionality criteria and

further evaluation.

(if applicable) financial risk to Eskom in the execution of the contract. During evaluation of a tenderer’s

Evaluation of Price 3.15 Evaluate the Price in accordance with the criteria/requirements in the Tender Data. Factors

the evaluation Price.

but will score zero under PPPFA point allocation.

Evaluation of 3.18 Score the Specific Goals with reference to the supporting documentation in the tender. If a

Specific Goals tenderer fails to meet Specific Goals and/or to submit the required proof/supporting

will score zero points for Specific Goals within the 90/10 or 80/20 allocation of points.

Ranking of tenders 3.19 According to the PPPFA, Eskom will add the score for Pricing and the Specific Goals

Objective criteria 3.20 A contract may be awarded to a tenderer that did not score the highest points only in

must stipulate the Objective Criteria in the Invitation to Tender. Functionality and any

element of the B-BBEE scorecard may not be used as Objective Criteria.

Reverse e-Auction 3.21 Reverse e-auction is an electronic system that utilises the 90/10 and 80/20 Price and

Preference point systems, and which is intended to achieve competitive pricing. Eskom

(NT instructions, content and/or production by the dtic, PPPFA Regulations; Amended B-BBEE Codes, COIDA;

CIDB, PPPFA etc) OHS Act; Eskom’s requirements for Safety, Health, Environment and Quality (SHEQ) and any other

Health, environmental and quality (SHEQ) systems, policies and capabilities are in place at the

Quality Contract Award. All costs and personnel associated with SHEQ must be reflected in the

However, for the purposes of PPPFA point allocation: if no B-BBEE certificate/affidavit is

Effective date of the form template: 21 February 2025. Review date: February 2030. The tender closing date is 28 September 2026 at 10:00 (from tender record).

Returnable documents — the Integrity Declaration Form (Annexure D) must be fully completed, signed and submitted by the stipulated deadline. The form requires declarations on conflicts of interest, fair tendering practices, shareholding/beneficiary information, and consent for verification. Joint ventures must complete the form for each JV member. All information must be true and correct; false declarations lead to rejection and action by Eskom.

Disqualification criteria: tenderers or their directors/shareholders listed on National Treasury's Database of Restricted Suppliers or Register for Tender Defaulters; convicted of fraud or corruption in procurement processes in the past five years; prohibited from doing business with international financial institutions; history of failing to meet contractual obligations with the State or State Owned Entities; restricted by Eskom. Employees of the State may not conduct business with organs of state. All declarations must be true and complete; false information leads to rejection.

appointment or election of,

directors of that company who control a majority of the votes at a meeting of the board;

(b) in the case of a juristic person that is a close corporation, that first person owns the majority

of the members’ interest, or controls directly, or has the right to control, the majority of

members’ votes in the close corporation;

C

Mandatory completion of Annexure D (Integrity Declaration Form) covering: declaration of interest (conflicts with Eskom employees/directors, related parties, controlling partners); declaration of fair tendering practices (no bid rigging, collusion, fraud); declaration of shareholding/beneficiary information for all individuals and entities; consent for verification and sharing of information with third parties. Tenderers must not be listed on National Treasury's Database of Restricted Suppliers or Register for Tender Defaulters. No convictions for fraud/corruption in procurement in past five years. No prohibition from international financial institutions. No history of failing contractual obligations with State/SOCs. Not restricted by Eskom. State employees prohibited from conducting business with organs of state.

Risk analysis for the manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station. Identifies eight key risk areas with mitigation actions: dimensional mismatch/fabrication errors, rework from inadequate QA/QC, safety incidents/OHSA non-compliance, schedule conflicts/access delays, delays from unavailability of dependent service providers, disputes over progress valuation, environmental non-compliance, and acceptance/commissioning disputes.

Scope: Manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station.

Key technical requirements:

• Attach approved design drawings with revision control in contract documents.
• Include a detailed QA/QC plan aligned with Eskom standards for welding, alignment, and seal settings.
• Include requirement for OHS-compliant method statements and a safety plan for all high-risk tasks (lifting, working at height).
• Develop a detailed outage interface and dependency plan to manage schedule conflicts and access delays during outage work.
• Define responsibilities, interfaces, and lead times in the outage plan to avoid delays from unavailability of dependent service providers.
• Define clear deliverables linked to payment milestones (e.g., per boiler or phase).
• Include an environmental management plan compliant with ISO 14001.
• Use the standard for air leakage tests or performance benchmarks for acceptance and commissioning.

Develop a detailed outage interface and dependency plan to manage schedule conflicts and access delays during outage work. Define responsibilities, interfaces, and lead times in the outage plan to avoid delays from unavailability of dependent service providers. Include an environmental management plan compliant with ISO 14001. Attach approved design drawings with revision control in contract documents. Include a detailed QA/QC plan aligned with Eskom standards for welding, alignment, and seal settings. Include requirement for OHS-compliant method statements and a safety plan for all high-risk tasks. Define clear deliverables linked to payment milestones (e.g., per boiler or phase). Use the standard for air leakage tests or performance benchmarks for acceptance and commissioning.

Include a detailed QA/QC plan aligned with Eskom standards for welding, alignment, and seal settings. Attach approved design drawings with revision control in contract documents to prevent dimensional mismatch or fabrication errors.

Include requirement for OHS-compliant method statements and a safety plan for all high-risk tasks, specifically lifting and working-at-height activities, to ensure OHSA compliance and prevent safety incidents.

Define clear deliverables linked to payment milestones (e.g., per boiler or phase) to avoid disputes over progress valuation. Use the standard for air leakage tests or performance benchmarks for acceptance and commissioning to prevent disputes.

Clarification meeting and reverse e-auction training date: to be filled in by the bidder on the acknowledgement form. No closing date or other mandatory dates are stated in this document.

{"name":"_____________________________________________________________","email":null,"phone":null,"department":null,"address":null}

Returnable document: Annexure A.1 Acknowledgement Form – Reverse E-auctioning Training must be completed, signed and submitted. The form requires the bidder to confirm attendance at the clarification meeting and reverse e-auction training, or to confirm self-training via the uploaded video, and to declare ability to operate the reverse e-auction system if recommended.

Bidders must be registered on the Central Supplier Database (CSD), hold valid tax clearance (SARS TCS/tax pin), and meet any applicable B-BBEE, CIDB, or local content requirements as per standard Eskom procurement policy. Specific eligibility thresholds not detailed in this document.

This Supplier Evaluation Pack (applicable 1 March 2026 to 28 February 2027) is a PAYE questionnaire used by Eskom to classify contractors for tax purposes under the Fourth Schedule to the Income Tax Act. It determines whether a contractor is an Independent Contractor, Personal Service Provider, Labour Broker, or Dependent Contractor, which dictates PAYE withholding and IRP5/IT3(a) coding. The pack contains Evaluation Pack A (for Companies, Close Corporations, Trusts) and Evaluation Pack B (for Individuals), each with a series of yes/no questions covering residence, employee count, connected persons, income concentration, place/control/supervision, and a dominant impression test. Based on answers, contractors must sign specific affidavits (Appendices 1–9) and a summary declaration. Completed packs (signed summary sheet and affidavits) are returned to the Eskom representative with a copy to Group Tax ([email protected]). Eskom accepts no liability for use of the pack. Definitions per the Income Tax Act are in Appendix 10.

The Supplier Evaluation Pack applies from 1 March 2026 to 28 February 2027 (2026/2027 tax year). No tender closing date, briefing dates, or site visit dates are stated in this document.

Eskom Group Tax contact for submission of completed packs: [email protected]. Eskom Holdings SOC Ltd and its listed subsidiaries (Eskom Rotek Industries SOC Ltd, Eskom Enterprises SOC (Pty) Ltd, Escap SOC (Pty) Ltd, Eskom Finance Company SOC (Pty) Ltd, Eskom Foundation NPC, Eskom National Transmission Company SA). No SCM or technical tender contacts are provided.

This document is a PAYE Questionnaire (Supplier Evaluation Pack) for tax classification, not a tender submission pack. It does not contain tender submission instructions, closing dates for bids, or returnable forms for a procurement process. Contractors complete the questionnaire and return the signed summary sheet and signed affidavits to their Eskom representative, copying Group Tax at [email protected].

The document does not contain procurement evaluation criteria. It provides a tax classification questionnaire (Evaluation Pack A for companies/CCs/trusts and Evaluation Pack B for individuals) to determine whether a contractor is an Independent Contractor, Personal Service Provider, Labour Broker, or Dependent Contractor under the Fourth Schedule to the Income Tax Act. Classification outcomes dictate PAYE withholding and IRP5 coding (codes 3601, 3616, 3617).

The document specifies no technical scope, deliverables, quantities, standards, or service levels for the air heater element packs tender referenced in the tender record. It is solely a tax compliance tool to classify contractors for PAYE purposes under the Income Tax Act.

No pricing schedule, bill of quantities, or rates for the air heater element packs tender are included. The document only addresses tax withholding outcomes: PAYE deducted at individual tax rates for Personal Service Providers, Dependent Contractors, and Labour Brokers without a valid IRP30 certificate; no PAYE for Independent Contractors and Labour Brokers with a valid IRP30 (IT3(a) issued with code 3617, reason code 07). IRP5 codes 3601 (PSP/Dependent Contractor), 3616 (Independent Contractor), and 3617 (Labour Broker) apply.

Tax withholding outcomes based on classification:

• Independent Contractor: no PAYE withheld; IT3(a) issued with code 3616 or 3617.
• Personal Service Provider / Dependent Contractor: PAYE withheld at prevailing individual tax rates; IRP5 coded 3601 or 3616.
• Labour Broker with valid IRP30 exemption certificate: no PAYE withheld; IT3(a) with code 3617, reason code 07.
• Labour Broker without valid IRP30: PAYE withheld at individual rates until certificate provided; IRP5 with code 3617.

No pricing schedule, bonds, guarantees, or payment terms for the tender are included.

Contractors must complete the applicable Evaluation Pack (A for Company/CC/Trust, B for Individual) and sign the required appendices based on questionnaire outcomes:

• Appendix 1: Affidavit confirming three or more full-time employees not connected to owners.
• Appendix 2: Affidavit confirming no connected person will personally render services to Eskom.
• Appendix 3: Affidavit confirming services not performed mainly at Eskom premises and not subject to Eskom control/supervision.
• Appendix 4: Affidavit confirming not more than 80% of income from any one client or associated institution.
• Appendix 5: Affidavit (individuals) confirming provision of a service, not people.
• Appendix 6: Declaration of Labour Broker status.
• Appendix 7: Declaration of Dependent Contractor or Personal Service Provider status.
• Appendix 8: Declaration of Independent Supplier/Contractor status.
• Appendix 9: Declaration of Non-Resident status.

All affidavits require a Commissioner of Oaths. Contractors must notify Eskom in writing of any status changes. CSD registration, B-BBEE, CIDB, and other procurement compliance requirements are not addressed in this document.

The document does not contain tender evaluation criteria. It provides a tax classification decision matrix: for companies/CCs/trusts, answers to Questions 6(i)–6(xi) are tallied as 'Independent' or 'PSP'; if any of 6(i), 6(iii), 6(v), 6(vi), 6(ix) are 'PSP', or more than 50% of 6(ii), 6(iv), 6(vii), 6(viii), 6(x), 6(xi) are 'PSP', the contractor is classified as a Personal Service Provider (PAYE withheld, IRP5 code 3601). Otherwise, if Appendix 7 was not already signed at Questions 4 or 5, the contractor signs Appendix 8 as an Independent Supplier (no PAYE, IT3(a) code 3616). For individuals, a similar matrix uses 'Employee' vs 'Independent' outcomes; 'Employee' on key questions or >50% on others leads to Dependent Contractor classification (PAYE withheld, IRP5 code 3601/3616).

Document effective date: 08 November 2024. Document review date: November 2029. No tender closing date, briefing, or site visit dates are stated in this document.

{"name":null,"email":null,"phone":null,"department":null,"address":"nd to sign all documents in connection with the tender and any contract that may result from it on"}

Returnable form: Eskom Authorisation Form (Document 240-15811258 Rev 2). The tenderer must complete the certificate corresponding to its entity type (company, close corporation, partnership, joint venture, sole proprietor, or trust) and attach certified proof of authorisation (board resolution, members' resolution, power of attorney, or trustees' resolution). The authorised signatory must also complete and sign the declaration table at the end of the form. All sections must be fully completed and signed.

Eligibility requires the tenderer to be a legally constituted entity (company, close corporation, partnership, joint venture, sole proprietor, or trust). The authorised signatory must be duly appointed by resolution or power of attorney as specified for the entity type. Certified proof of authorisation must be submitted with the tender. No technical or financial evaluation criteria are stated in this document.

Entity-specific compliance: Company — certified copy of board resolution; Close corporation — certified copy of members’ resolution; Partnership — signed by all partners necessary to commit the partnership; Joint venture — power of attorney signed by authorised signatories of all JV members plus certified copy of JV agreement stating joint and several liability, lead member, and work/payment ratios; Sole proprietor — confirmation of sole proprietorship; Trust — certified copy of trustees’ resolution. All tenderers must complete the signatory declaration table.

Market research: no current suppliers providing the services; potential suppliers from open market.

Tender closing: 28 September 2026 at 10:00 (from tender record).

No compulsory briefing, site visit, or clarification deadline is mentioned in the SDL&I strategy document.

Post-award deadlines:

• B-BBEE improvement/retention plan: within 30 days of contract signing
• SDL&I Implementation Schedule: within 28 days of contract award
• Quarterly SDL&I reports: every quarter during contract

Department of Trade, Industry and Competition (dtic) — for NIPP obligation agreement (applicable if imported content ≥ USD 5 million).

Eskom SDL&I representative — for submission of SDL&I Implementation Schedule and quarterly reports.

No named individuals, emails, phone numbers, or physical submission address are provided in this document.

Submission method and address are not stated in the SDL&I strategy document. The tender itself closes on 28 September 2026 at 10:00 (per the tender record).

Returnable documents required to claim preference points:

• Valid B-BBEE certificate (SANAS accredited) or sworn affidavit / CIPS affidavit
• Proof of ownership / shareholding (CIPC documentation with shareholding breakdown)
• Certified ID copies of shareholder(s)
• Proof of disability (where applicable)
• Consolidated B-BBEE certificate for trusts, consortia or joint ventures

Additional contractual deliverables after award:

• B-BBEE improvement or retention plan within 30 days of contract signing
• SDL&I Implementation Schedule completed and returned to SDL&I representative within 28 days of contract award
• Quarterly SDL&I compliance reports using the Data Collection Template
• Proposals for local procurement content (target 100%), procurement from black-owned enterprises (target 20%), jobs created/retained, and skills development (6 learners: 2 Mechanical Technicians S1/S2, 2 Welders N3, 2 Riggers N3)

Sworn affidavit validity requirements: deponent name/ID/designation; enterprise name/address per CIPC; black ownership percentages (including black female and designated groups; Statement 004 beneficiaries if applicable); total revenue and basis (audited/management accounts); financial year end; single B-BBEE status level; empowering supplier status (QSE basis); matching deponent and commissioner of oath dates; commissioner not employed by enterprise.

Preference point system: 90/10 (price 90 points, specific goals 10 points).

B-BBEE status level points (90/10): Level 1 = 10, Level 2 = 9, Level 3 = 6, Level 4 = 5, Level 5 = 4, Level 6 = 3, Level 7 = 2, Level 8 = 1, Non-compliant = 0.

Failure to submit B-BBEE documentation does not disqualify but limits score to 90/100 (0 for specific goals).

Objective criteria: stated as a condition for contract award; failure to meet them may result in the second-ranked tenderer being recommended for award. The specific objective criteria are not detailed in this document.

SDL&I commitments (B-BBEE improvement, local content, black-owned procurement, jobs, skills) do not form part of scoring but become contractual obligations.

Scope: Manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station (per tender record).

SDL&I contractual obligations (not scored but binding):

• Local procurement content target: 100% (value added in South Africa by South African resources; tender response must separate local and imported components per the Price Schedule)
• Procurement from designated black-owned enterprises (≥51% black ownership): target 20% of local procurement content (indirect expenses and direct subcontractor spend)
• Jobs: tenderer must propose type and number of jobs created and retained in South Africa
• Skills development: 6 unemployed learners total — 2 Mechanical Technicians (S1/S2 National Diploma Mechanical), 2 Welders (N3 or equivalent Trade Test), 2 Riggers (N3 or equivalent Trade Test); candidates from all provinces, demographically representative; excludes Eskom employees and registered learners; full cost borne by tenderer; SETA grants and SARS tax rebates may be accessed
• B-BBEE improvement/retention plan required within 30 days of contract signing with defined migration milestones per current B-BBEE level

Skills development delivery: tenderers participate directly and through supply network; SETA-accredited training providers may be approached. Tenderers bear full cost; Eskom contributes no funding. Tenderers advised to access SETA grants/subsidies and SARS tax rebates. SDL&I Implementation Schedule due 28 days post-award; quarterly reporting via Data Collection Template; Eskom reviews within 30 days; corrective measures required before next report or retention clauses invoked.

Tender response must separate local and imported components per the Price Schedule included with tender documents. Local procurement content = total spending minus imported component. Eskom target: 100% local content.

Pricing: tender response must separate local and imported components per the Price Schedule included with the tender documents.

Penalties and security:

• 2.5% of contract value penalty for failure to meet SDL&I obligations
• 2.5% of every invoice (excluding VAT) retained as security for duration of contract; released only upon fulfilment of all SDL&I obligations

No bond, guarantee, or insurance requirements are stated in this document. Payment terms not specified.

Mandatory for contract award:

• Valid B-BBEE certificate (SANAS accredited) or sworn affidavit (EME ≤ R10m turnover; QSE ≤ R50m turnover with ≥51% black ownership) or CIPS affidavit
• CSD registration and valid tax compliance status (implied standard requirement)
• Proof of ownership/shareholding (CIPC documentation with breakdown)
• Certified ID copies of shareholders
• Consolidated B-BBEE certificate for trusts, consortia, JVs

B-BBEE improvement milestones (contractual, non-negotiable):

• Level 1: maintain
• Level 2-3: improve/maintain
• Level 4: achieve Level 3 by end of Year 1, then improve one level per year
• Level 5-8 or non-compliant: achieve Level 4 by end of Year 1, then improve one level per year from Year 2

NIPP obligation: if imported content ≥ USD 5 million, winning bidder must negotiate and sign NIPP obligation agreement with dtic before Eskom contract signing.

Sworn affidavit validity requirements: deponent name/ID/designation, enterprise name/address, black ownership percentages, total revenue and basis (audited/management accounts), financial year end, single B-BBEE status level, empowering supplier status, matching deponent and commissioner of oath dates, commissioner not employed by enterprise.

Duplicate of bbbee above — same content.

Penalty: 2.5% of contract value for failure to meet SDL&I obligations. Retention: 2.5% of every invoice (excl. VAT) held as security for contract duration; released only upon full SDL&I fulfilment. Quarterly SDL&I reports via Data Collection Template; Eskom review within 30 days; corrective measures required before next reporting period or retention clauses invoked. SDL&I Implementation Schedule due 28 days post-award for monitoring reference.

Reporting and monitoring: quarterly SDL&I reports via Data Collection Template; Eskom review within 30 days; written notification of non-compliance; corrective measures required before next report or retention clauses invoked. SDL&I Implementation Schedule due 28 days post-award for monitoring reference.

Duplicate of evaluation_criteria above — same content.

Document issued: 06 August 2026 (Eskom representative Dimpho Mnisi). Tender closing date per tender record: 28 September 2026 at 10:00. No compulsory briefing, site visit or clarification deadline stated in this document.

Eskom representative: Dimpho Mnisi. Department: Tutuka Power Station. No email, phone or submission address provided in this document.

Returnable documents required with the tender submission:

• Valid ISO 9001:2015 certification from an internationally accredited certification body, with product/service scope relevant to the manufacture, supply, delivery, removal and installation of air heater element packs.
• Documented evidence of QMS in operation per Section B:

• Organisation chart and responsibility matrix including quality management function/role (ISO 9001:2015 Clause 5.3).

• Documented information for control of externally provided processes, products and services, including criteria for evaluation, selection, monitoring of performance, and re-evaluation of external providers (ISO 9001:2015 Clause 8.4).

• Latest internal management system audit report (not older than 12 months) with nonconformity, correction and/or corrective action reports, showing objective, scope, criteria and outcomes (ISO 9001:2015 Clause 9.2).

• Latest certification management system audit report (not older than 12 months) with nonconformity, correction and/or corrective action reports.

• Records of management review meetings (minutes, attendance registers).

• Draft Contract Quality Plan specific to the scope of work (ref ISO 10005, and Eskom specifications 240-105658000 and 240-109253698).
• Draft/example Inspection and Test Plan (ITP) or Quality Control Plan (QCP) on similar/previous work (ref ISO 10005, and Eskom specifications 240-105658000 or 240-109253302).
• Form A completed and signed.
• Any additional customer-specific requirements per the scope of work/specification.

Submission method, address, format and closing time are not stated in this document; refer to the main tender invitation.

Quality requirements evaluation (Category 1) scored per the following sections:

• Section A (Option 1): Valid ISO 9001 certification — 4 points (A.1 scope relevance 1, A.2 approved certification authority 1, A.3 recognised international accreditation 1, A.4 certificate validity 1).
• Section B: Evidence of QMS in operation — 5 points (B.1 organisation chart/responsibility matrix 1, B.2 control of externally provided processes 1, B.3 internal audit report 1, B.4 certification audit report 1, B.5 management review records 1).
• Section C: Draft Contract Quality Plan — 1 point.
• Section D: Draft/example ITP or QCP — 1 point.
• Section E: Form A completed and signed — 1 point; additional scope-specific requirements — 1 point.

Total Category 1 score: 13 points. No price/functionality split, preference point system (80/20 or 90/10), or minimum qualifying thresholds are stated in this document.

Scope: Manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station (Eskom).

Quality requirements per Eskom specification 240-105658000 and related references 240-109253698 (Contract Quality Plan) and 240-109253302 (Quality Control Plan/ITP).

Bidders must demonstrate a functioning ISO 9001:2015 Quality Management System with relevant scope, and provide project-specific Contract Quality Plan and Inspection/Test Plans.

Mandatory:

• Valid ISO 9001:2015 certification from an internationally accredited body with relevant scope.
• All Section B QMS operational evidence documents.
• Draft Contract Quality Plan and draft/example ITP/QCP.
• Form A completed and signed.

No CSD registration, tax compliance status, B-BBEE level, CIDB grading, CIPC registration, professional body registration, local content percentage, or financial capacity thresholds stated in this document.

Mandatory quality management requirements:

• Valid ISO 9001:2015 certification with relevant scope from an internationally accredited body.
• Documented QMS operational evidence (organisation chart, responsibility matrix, external provider control procedure, internal audit report, certification audit report, management review records).
• Project-specific Draft Contract Quality Plan (ref ISO 10005).
• Project-specific Draft/Example ITP or QCP (ref ISO 10005).
• Form A completed and signed.
• Additional customer-specific requirements as per scope of work/specification.

Manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station. Quality requirements per Eskom specification 240-105658000 and ISO 9001. Pre-contract award Category 1 selected (clause 3.5). Post-contract award requirements include Contract Execution, Supplier Quality Performance Monitoring, Eskom Rights of Access and Information, Preservation, Quality Audits, Nonconformity Management, and Special Processes (all clause 3.7/3.8).

Eskom Quality Representative: Dimpho Mnisi, Officer Quality Assurance, signed 06.08.2026.

Pre-contract award quality assessment: Category 1 capability and capacity assessment per specification 240-105658000 clause 3.5. Post-contract award quality requirements: Contract Execution (clause 3.7), Supplier Quality Performance Monitoring Phase (clause 3.7), Eskom Rights of Access (clause 3.8), Eskom Rights to Information (clause 3.8), Preservation (clause 3.8), Quality Audits Related Conditions (clause 3.8), Management of Nonconformities and Nonconforming Outputs Identified by Eskom (clause 3.8), Special Processes (clause 3.8). ISO 9001 clauses applicable: 4 Context of the Organisation, 5 Leadership, 6 Planning, 7 Support, 8 Operation, 9 Performance Evaluations, 10 Improvement. Quality principles applicable: Customer focus, Leadership, Engagement of people, Process approach, Improvement, Evidence based decision making, Relationship Management. Tenderer must complete and sign Form A to acknowledge and accept Eskom Supplier Quality Requirements per 240-105658000 and ISO 9001.

Manufacture, supply, delivery, removal and installation of air heater element packs for three units at Tutuka Power Station. Quality requirements governed by Eskom specification 240-105658000 and ISO 9001:2015. Pre-contract award: Category 1 selected (clause 3.5). Post-contract award requirements: Contract Execution (clause 3.7), Supplier Quality Performance Monitoring Phase (clause 3.7), Eskom Rights of Access (clause 3.8), Eskom Rights to Information (clause 3.8), Preservation (clause 3.8), Quality Audits Related Conditions (clause 3.8), Management of Nonconformities and Nonconforming Outputs Identified by Eskom (clause 3.8), Special Processes (clause 3.8).

Quality approach must address ISO 9001 clauses 4-10 and seven quality principles. Specific methodology requirements per Eskom specification 240-105658000 for air heater element pack manufacture, supply, delivery, removal and installation at Tutuka Power Station. Pre-contract Category 1 capability demonstration. Post-contract execution, monitoring, audit access, information rights, preservation, nonconformity management, and special process controls.

Duplicate of quality_management section above — same content regarding ISO 9001 clauses 4-10, quality principles, Eskom specification 240-105658000 pre/post-contract requirements, Form A sign-off, and Eskom Quality Representative Dimpho Mnisi.

CSD registration and valid SARS tax clearance certificate or tax compliance status PIN required (per tender record). Quality compliance: ISO 9001:2015 certification or alignment with clauses 4-10. Eskom specification 240-105658000 compliance. Form A (240-68099512 Rev 9) must be completed and signed by tenderer's quality representative to acknowledge and accept Eskom Supplier Quality Requirements.

Evaluation includes pre-contract award quality capability and capacity assessment (Category 1 per clause 3.5 of 240-105658000). Post-contract award quality performance monitoring against ISO 9001 clauses 4-10 and quality principles. Tenderer must sign Form A acknowledging Eskom Supplier Quality Requirements.

{"name":null,"email":null,"phone":null,"department":"y), should the resulting tender, or part thereof, be awarded to such natural/legal person,","address":"ERING PRACTICES"}

The Integrity Declaration Form (Eskom form 559-1848080 Rev 1) must be fully completed, signed, and submitted as a mandatory returnable. Failure to do so will result in the tender not being evaluated further.

Tenderer must not be listed on National Treasury's Database of Restricted Suppliers or Register for Tender Defaulters. No director, member or shareholder may have been convicted of fraud or corruption in procurement processes in the past five years. No prohibition from doing business with international financial development/funding agencies. No history of failing to meet contractual obligations with any state-owned company. Must declare all relationships with Eskom employees, directors, contractors or consultants, and with other tenderers. Must provide complete shareholding information for all individuals and entities.

provisions above, please complete the table hereunder with all required information.

Full Name & Capacity/ Identity Confirm and provide Full Names & To your

Position within tenderer Number details (including Capacity/Position of knowledge

(e.g. employee/ Director/ employee number) if Eskom employee/ is this

member/ owner/ you are a State/State director

Integrity Declaration Form (Eskom form 559-1848080 Rev 1): must be fully completed, signed, and submitted. The form requires disclosure of any relationships with Eskom or state employees, declaration of fair tendering practices, and full shareholding information. Disqualification applies if the bidder is on National Treasury's Database of Restricted Suppliers or Register for Tender Defaulters, or if any director/member/shareholder has been convicted of fraud or corruption in procurement in the past five years, or has a history of failing contractual obligations with a state-owned company.

This document is the technical evaluation strategy for the replacement of boilers 1 to 5 air heater element packs at Tutuka Power Station. The scope includes supply, delivery, removal, and installation. The strategy defines mandatory and qualitative evaluation criteria and TET member responsibilities. The document applies to Tutuka Power Station.

Phone: 0168966153

Department: Supply Chain Management

Returnable Documents: None N/A N/A Tender Technical Evaluation Strategy for Replacement of Unique Identifier: 559-62120360 Boilers 1 to 5 Air Heater Element Packs Revision: 1 Page: 3.3 QUALITATIVE TECHNICAL EVALUATION CRITERIA Table 2A: Qualitative Technical Evaluation Criteria for supply Qualitative Technical Criteria Reference to Technical Specification / Criteria Weighting Criteria Sub Weighting Description Tender Returnable (%) (%) Returnables: Provide proof of supplier 1. Tenderer to demonstrate ability to 25 or principal of agent has own workshop supply the air heater element packs. or workshop lease agreement and This is through tenderer’s ownership equipment and tools to manufacture workshop or workshop lease element packs. A utility bill/ statement is agreement and manufacturing acceptable proof of own workshop. equipment and tools to execute the, 100% (5): Proof of own workshop or works. lease agreement and list including pictures including pictures of equipment and tools for manufacturing element packs, 40% (2): Proof of own workshop or lease agreement but with no list including pictures of equipment and tools for manufacturing element packs, 0% (0): No submission Returnables: Provide a list of previous 2. Tenderer to demonstrate through 25 purchase orders/contracts for supply of verifiable reference list of at least 3 air heater element packs completed by previous purchase orders for supply the company/supplier within the last 5 of air heater element packs to Eskom years. Include contact details (contact or other companies within the last 5 person and contact number for each years. order/contract)., 100% (5): List with 3 or more purchase orders for air heater element packs in the last 5 years Tender Technical Evaluation Strategy for Replacement of Unique Identifier: 559-62120360 Boilers 1 to 5 Air Heater Element Packs Revision: 1 Page, 80% (4) List with 2 purchase orders for supply of air heater element packs in the last 5 years, 40% (2) List with 1 purchase order for supply of air heater element packs in the last 5 years, 0% (0): No submission Returnables: Provide detailed 3. Tenderer to demonstrate ability to 20 procedure for packaging and preserving package and preserve the air heater air heater element packs for storage. element packs for storage., 100% (5): Detailed procedure for packaging and preserving air heater element packs for storage, 40% (2): Procedure for packaging and preserving the air heater element packs not detailed, 0% (0): No procedure for packaging and preserving air heater element packs for storage Returnables: Provide an approved 4. Provide lead times for delivery of first 20 delivery schedule indicating expected set of air heater element packs from lead times from a previous purchase previous purchase order. This should order/ contract. include a breakdown of activities, 100% (5): Lead time ≤ 12 weeks (with durations) to be carried out with a schedule of activities from the time a purchase order is placed.

• 80% (4): Lead time > 12 weeks & ≤ 18 weeks with a schedule of activities, 40% (2): Lead time > 18 weeks & ≤ 24 weeks with a schedule of activities, 0% (0): Lead time > 24 weeks or no lead time provided Tender Technical Evaluation Strategy for Replacement of Unique Identifier: 559-62120360 Boilers 1 to 5 Air Heater Element Packs Revision: 1 Page: Returnables: Completed 5. Tenderer to demonstrate ability to 10 comprehensive QCP’s and data book carry out quality control in from previous manufacturing of air manufacturing of air heater element heater element packs. packs and to compile data books., 100% (5): Detailed QCP’s and data book from previous manufacturing and supply of air heater element packs, 80% (4): Detailed QCP’s without data book from previous manufacturing and supply of air heater element packs, 40% (2): Undetailed QCP’s and data book from previous manufacturing and supply of air heater element packs 0% (0), No QCP’s and data book from previous manufacturing of air heater element packs. TOTAL 100 Table 3B: Qualitative Technical Evaluation Criteria for services (Removal & installation) Qualitative Technical Criteria Reference to Technical Specification / Criteria Weighting Criteria Sub Weighting (%) Description Tender Returnable (%) Returnables: Proof of certification 1. Tender to demonstrate ability to meet 20, 100% (5): Copy of ISO3834 Eskom welding requirements through certificate submitted accreditation to ISO3834 Standard, 80% (4): Copy of letter from certification authority indicating successful completion of certification Tender Technical Evaluation Strategy for Replacement of Unique Identifier: 559-62120360 Boilers 1 to 5 Air Heater Element Packs Revision: 1 Page: process but waiting for ISO3834