Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Issuing Organization
Passenger Rail Agency of South Africa (PRASA)Location
Gauteng
Closing Date
13 Aug 2026
Documents available on tender detail page
Tender Type
Request for Quotation
Delivery Location
CNR FUEL & HARMONY ROAD - Cor - Johannesburg - 2001
Organization Type
GOVERNMENT
Published
05 Aug 2026
OCDS Reference
ocds-9t57fa-164722
This request for quotation (RFQ) from the passenger rail agency of south africa (PRASA) seeks a qualified service provider to repair and service three specific grass cutting machines: an mbrush 068 brush cutter, a stihl fs461 c-em professional brush cutter, and a ryobi blower backpack. The work involves comprehensive overhauls including engine, fuel system, drivetrain, and cutting mechanism repairs, as well as a full service on the blower. The contract is based in gauteng and is aimed at suppliers capable of servicing all three machine types.
Continue with tenders sharing this issuer, category, or province.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Date & Time
Thursday, 13 August 2026 - 23:30
Venue
null
Bidder to quote on overhauling the machines, provide proof of address where machines will be worked on
Categories
Request for Quotation
CNR FUEL & HARMONY ROAD - Cor - Johannesburg - 2001
Tenders in this industry often require registration with these bodies.
Recommended Certifications
Having these can improve your winning chances: CA(SA) - Chartered Accountant, PMI-PMP (Project Management Professional), Prince2 Practitioner, Six Sigma Certification
AI Document Analysis Stages
Description
Source: Grass Cutting Machine Specification.pdf (unknown)05 Aug
2026
Tender Published
Tender was published
13 Aug
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdf
Grass Cutting Machine Specification.pdf
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
Passenger Rail Agency of South Africa (PRASA)Contact Person
Modumo Maeco
Phone
011-013-0411
Secure PRASA tenders with AI Matching & Recommendations, rail-infrastructure intelligence, compliance analysis, and bid support for rolling stock and station upgrades.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubLearn how to submit a winning bid with these related articles
Median Estimate
R 349 140
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
The RFQ covers the overhaul of a STIHL FS461 C-EM professional brush cutter and the repair and service of a RYOBI Blower Backpack, in addition to the MBRUSH 068 brush cutter detailed in the technical specifications.
Submission Guidelines
Source: Grass Cutting Machine Specification.pdf (unknown)Returnable Documents: The document mentions 'Returnable Documents' but does not specify which forms or documents are required. No submission address, method, or deadline details are provided in the extracted text. Bidders must check the full RFQ document for a list of mandatory returnable documents and submission instructions.
Technical Specifications
Source: Grass Cutting Machine Specification.pdf (unknown)Scope of Work: Repair and service of three machines:
Bidder guidance: You must be able to service all three machine types. Quote should cover parts, labour, and collection/delivery if applicable. The document does not specify whether parts are to be included in the price or supplied by PRASA – clarify in your submission.
Methodology
Source: Grass Cutting Machine Specification.pdf (unknown)The document outlines step-by-step repair procedures for each machine. Bidders should follow these as a minimum work scope:
Compliance Requirements
Source: Grass Cutting Machine Specification.pdf (unknown)The document does not explicitly list compliance requirements such as CSD registration, tax clearance, B-BBEE certificates, or CIDB grading. Bidders should assume standard government procurement compliance applies and include all mandatory compliance documents unless the full RFQ states otherwise.
Contractual Terms
Source: Grass Cutting Machine Specification.pdfWarranty: The service provider must provide a warranty for the overhauled machines. The duration and terms of the warranty are not specified in the extracted text. Bidders should state their standard warranty period in the quotation.
Important Dates
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdf (RFQ){"closingDate":"13 AUG 2026","closingTime":"23:30"}
Contact Information
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdf (RFQ){"name":null,"email":"[email protected]","phone":"011 085 7269","department":"Supply Chain Management","address":"ATION(S) MUST BE TYPED IN COMPANY LETTERHEAD AND MUST EMAILED TO"}
Submission Guidelines
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdf (RFQ)Returnable Documents: Returnable Documents means all the documents, Sections and Annexures, as listed in the tables below. There are three types of returnable documents as indicated below and Bidders are urged to ensure that these documents are returned with the quotation based on the consequences of non- submission as indicated below: 16.1. Mandatory Returnable Documents Failure to provide Mandatory Returnable Documents at the Closing Date and time of this RFQ will result in a Bidder Bidders are therefore urged to ensure that all documents are returned with their Quotations. SECTION 3
Evaluation Criteria
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdf (RFQ)Stage 1A Mandatory Requirements
If you do not submit the following mandatory documents/requirements, your bid will be automatically
disqualified.
Only bidders who comply with stage 1A will be evaluated further. [Note: only include technical
legislative requirements)
No. Description of requirement Tick
a) Quotation on company letterhead
b) Proof of address where machines will be repaired
Request For Quotation SCM_2024
Stage 1B Other Mandatory Requirements
If you do not submit the following mandatory documents/requirements, PRASA may request the bidder
to submit the information within three (3) working days. Should this information not be provided, your bid
proposal will be disqualified.
Only bidders who comply with stage 1B will be evaluated further.
No. Description of requirement Tick
a) Supply of valid SARS Pin
Completion of ALL RFP documentation (includes ALL
b) declarations)
c) CSD supplier registration number
2.1 Stage 2- Price and Specific Goals
The following formula, shall be used to allocate scores to the interested bidders :
The maximum points for this tender are allocated as follows:
Details points
Price 80
Specific goals 20
Total points for price 100
And specific goals
Formulae for procurement of goods and services
Points awarded for price
The 80/20 preference point systems
A maximum of 80 points is allocated for price on the following basis:
Ps = 80
Where
Ps = Points scored for price of tender under consideration
Pt = Price of tender under consideration
Request For Quotation SCM_2024
Pmin = Price of lowest acceptable tender
Points awarded for specific goals
3.1. In terms of Regulation 4(2); 5(2); 6(2) and 7(2) of the Preferential Procurement
Regulations, preference points must be awarded for specific goals stated in the tender.
For the purposes of this tender the tenderer will be allocated points based on the goals
stated in table 1 below as may be supported by proof/ documentation stated in the
conditions of this tender:
Table 1: Specific goals for the tender and points claimed are indicated per the table below.
Note to tenderers: The tenderer must indicate how they claim points for each preference
point system.)
Number of points Number of points Evidence
allocated claimed (80/20
The specific goals allocated (80/20 system) system)
points in terms of this tender (To be completed (To be completed
by the organ of by the tenderer)
state)
At least B-BBEE Level 1 or 2 10 BEE Certificate not limited to
SANAS approved/ Affidavit
(in case of JV, a consolidated
scorecard will be accepted)
At least 51% owned by black 10 Certified copies of ID
Women Documents of the Owners not
older than 3 months
Request For Quotation SCM_2024
Section 5
Pricing and delivery schedule
Bidders are required to complete the attached Pricing Schedule Annexure: ................
1 Prices must be quoted in South African Rand, inclusive of all applicable taxes.
2 Price offer is firm and clearly indicate the basis thereof.
3 Pricing Bill of Quantity is completed in line with schedule if applicable (delete if not applicable).
4 Cost breakdown must be indicated.
5 Price escalation basis and formula must be indicated.
6 To facilitate like-for like comparison bidders must submit pricing strictly in accordance with this price
schedule and not utilise a different format. Deviation from this pricing schedule could result in a bid
being declared non-responsive.
7 Please note that should you have offered a discounted price(s), PRASA will only consider such
price discount(s) in the final evaluation stage on an unconditional basis.
8 Bidders are to note that if price offered by the highest scoring bidder is not market related, PRASA
may not award the contract to the Bidder. PRASA may:
9 Negotiate a market-related price with the Bidder scoring the highest points;
10 If that Bidder does not agree to a market-related price, negotiate a market-related price with the Bidder
scoring the second highest points;
11 If the Bidder scoring the second highest points does not agree to a market-related price, negotiate
a market-related price with the Bidder scoring the third highest points;
12 If a market-related price is not agreed with the Bidder scoring the third highest points, PRASA must
cancel the RFQ.
I / We _____________________________________________ (Insert Name of Bidding Entity) of
__________________________________________________ code ______________ (Full address)
conducting business under the style or title of: ____________________ represented by:
______________________________________________________________ in my capacity as:
_________________________________ being duly authorized, hereby offer to undertake and complete
the above-mentioned work/services at the prices quoted in the bills of quantities / schedule of quantities
or, where these do not form part of the contract, at a lumpsum, of
R_____________________________________________ (amount in numbers);
___________________________________________________ (amount in words) Incl. VAT.
DELIVERY PERIOD: Suppliers are requested to offer their earliest delivery period possible.
Delivery will be effected within working days from date of order. (To be completed by Service
provider)
Request For Quotation SCM_2024
Section 5
PRASA general conditions of purchase
General
PRASA and the Supplier enter into an order/contract on these conditions to supply the items (goods/services/works)
as described in the order/contract.
Conditions
These conditions form the basis of the contract between PRASA and the Supplier. Notwithstanding anything to the
contrary in any document issued or sent by the Supplier, these conditions apply except as expressly agreed in
writing by PRASA.
No servant or agent of PRASA has authority to vary these conditions orally. These general conditions of purchase
are subject to such further special conditions as may be prescribed in writing by PRASA in the order/contract.
Price and payment
The price or rates for the items stated in the order/contract may include an amount for price adjustment, which is
calculated in accordance with the formula stated in the order/contract.
The Supplier may be paid in one currency other than South African Rand. Only one exchange rate is used to
convert from this currency to South African Rand. Payment to the Supplier in this currency other than South African
Rand, does not exceed the amounts stated in the order/contract. PRASA pays for the item within 30 days of receipt
of the Suppliers correct tax invoice.
Delivery and documents
or late completion of the items may be subject to a penalty if this is imposed in the order/contract. No payment is
made if the Supplier does not provide the item as stated in order/contract.
Where items are to be delivered the Supplier:
destination in accordance with the order and includes a packing note stating the contents thereof; On dispatch of
each consignment, sends to PRASA at the address for delivery of the items, an advice note specifying the means
of transport, weight, number of volume as appropriate and the point and date of dispatch; Sends to PRASA a
detailed priced invoice as soon as is reasonably practical after dispatch of the items, and states on all
communications in respect of the order the order number and code number (if any).
Containers / packing material
Unless otherwise stated in the order/contract, no payment is made for containers or packing materials or return to
the Supplier.
Title and risk
Without prejudice to rights of rejection under these conditions, title to and risk in the items passes to PRASA when
accepted by PRASA.
Request For Quotation SCM_2024
Rejection
If the Supplier fails to comply with his obligations under the order/contract, PRASA may reject any part of the items
by giving written notice to the Supplier specifying the reason for rejection and whether and within what period
replacement of items or re-work are required.
expense. Any money paid to the Supplier in respect of the items not replaced within the time required, together
with the costs of returning rejected items to the Supplier and obtaining replacement items from a third party, are
paid by the Supplier to PRASA.
In the case of service, the Supplier corrects non-conformances as indicated by PRASA.
Where
Ps = Points scored for price of tender under consideration
Pt = Price of tender under consideration
Pmin = Price of lowest acceptable tender
3.3. Formulae for disposal or leasing of state assets and income
Generating procurement
3.3.1. Points awarded for price
A maximum of 80 points is allocated for price on the following basis:
Where
Ps = Points scored for price of tender under consideration
Request For Quotation SCM_2024
Pt = Price of tender under consideration
Pmax = Price of highest acceptable tender
4.1. In terms of Regulation 4(2); 5(2); 6(2) and 7(2) of the Preferential Procurement Regulations,
preference points must be awarded for specific goals stated in the tender. For the purposes of
this tender the tenderer will be allocated points based on the goals stated in table 1 below as may
be supported by proof/ documentation stated in the conditions of this tender:
4.2. In cases where organs of state intend to use Regulation 3(2) of the Regulations, which states
that, if it is unclear whether the 80/20 or 90/10 preference point system applies, an organ of state
must, in the tender documents, stipulate in the case of
(a) an invitation for tender for income-generating contracts, that either the 80/20 or 90/10
preference point system will apply and that the highest acceptable tender will be used to
determine the applicable preference point system; or
(b) any other invitation for tender, that either the 80/20 or 90/10 preference point system will
apply and that the lowest acceptable tender will be used to determine the applicable
preference point system,
then the organ of state must indicate the points allocated for specific goals for both the 90/10 and
80/20 preference point system.
Table 1: Specific goals for the tender and points claimed are indicated per the table below.
(Note to organs of state: Where either the 90/10 or 80/20 preference point system is applicable,
corresponding points must also be indicated as such.
Note to tenderers: The tenderer must indicate how they claim points for each preference point
system.)
Number of points Number of points Evidence
claimed (80/20 The specific goals allocated allocated system)
points in terms of this (80/20 system)
tender (To be completed
(To be completed by by the tenderer)
the organ of state)
At least B-BBEE Level 1 or 2 10 BEE Certificate not limited
to SANAS approved/
Affidavit (in case of JV, a
consolidated scorecard will
be accepted)
At least 51% owned by black 10 Certified copies of ID
Women Documents of the Owners
not older than 3 months
Request For Quotation SCM_2024
Declaration with regard to company/firm
4.3.
4.4.
4.5. Type of company/ firm
Partnership/Joint Venture / Consortium
One-person business/sole propriety
Close corporation
Public Company
Personal Liability Company
(Pty) Limited
Non-Profit Company
State Owned Company
[Tick applicable box]
4.6. I, the undersigned, who is duly authorised to do so on behalf of the company/firm, certify that
the points claimed, based on the specific goals as advised in the tender, qualifies the company/
firm for the preference(s) shown and I acknowledge that:
i) The information furnished is true and correct;
ii) The preference points claimed are in accordance with the General Conditions as indicated
in paragraph 1 of this form;
iii) In the event of a contract being awarded as a result of points claimed as shown in
paragraphs 1.4 and 4.2, the contractor may be required to furnish documentary proof to the
satisfaction of the organ of state that the claims are correct;
iv) If the specific goals have been claimed or obtained on a fraudulent basis or any of the
conditions of contract have not been fulfilled, the organ of state may, in addition to any other
remedy it may have
(a) disqualify the person from the tendering process;
(b) recover costs, losses or damages it has incurred or suffered as a result of
(c) cancel the contract and claim any damages which it has suffered as a result
of having to make less favourable arrangements due to such cancellation;
(d) recommend that the tenderer or contractor, its shareholders and directors,
or only the shareholders and directors who acted on a fraudulent basis, be
restricted from obtaining business from any organ of state for a period not
exceeding 10 years, after the audi alteram partem (hear the other side) rule
has been applied; and
(e) forward the matter for criminal prosecution, if deemed necessary.
Signature(s) of tenderer(s)
Surname and name:
Date:
Address:
Request For Quotation SCM_2024
C
Amount
Total r
C
Price
15% total
Unit r total VAT
2 4 2 2 qty grand
Unit ea ea ea ea
Afric pack frame mac back
Work cutter bowsaw spade of blower
GRASS RYBI BLACK GARDEN SCHEDULE SERVICE & LASHER LASHER11 DESCRIPTION REPAIR&SERVICE REPAIR SUPPLY SUPPLYSection SPECIFICATION/SCOPE BOQ/PRICING
Item NO. 1 2 3 4
Technical Specifications
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdf (RFQ)The appointment of a service provider to repair & service grass cutting machine
Pricing Schedule
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdfBidders are required to complete the attached Pricing Schedule Annexure: ................
3 Pricing Bill of Quantity is completed in line with schedule if applicable (delete if not applicable).
schedule and not utilise a different format. Deviation from this pricing schedule could result in a bid
being declared non-responsive.
7 Please note that should you have offered a discounted price(s), PRASA will only consider such
price discount(s) in the final evaluation stage on an unconditional basis.
Compliance Requirements
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdf (RFQ)Tax compliance central supplier
Tax compliance requirements
Tax compliance status (tcs) pin may be made via e-filing through the SARS website www
Tcs pin is available but the bidder is registered on the central supplier database (csd), a csd number must be
Csd number
Csd number must be
Central supplier database (csd), a csd number must be
on the National Treasury e-Tender Publication Portal, (www.etenders.gov.za), on CIDB website for
2.3 Application for tax compliance status (tcs) pin may be made via e-filing through the SARS website www.SARS.GOV.ZA.
Certificate / pin / csd number.
2.6 Where NO tcs pin is available but the bidder is registered on the central supplier database (csd), a csd number must be
B-BBEE Minimum Level: 1
Points Allocation: 80 points
B-BBEE Details: ill be allocated points based on the goals
stated in table 1 below as may be supported by proof/ documentation stated in the
conditions of this tender:
Table 1: Specific goals for the tender and points claimed are indicated per the table below.
Note to tenderers: The tenderer must indicate how they claim points for each preference
point system.)
Number of points Number of points Evidence
allocated claimed (80/20
The specific goals allocated (80/20 system) system)
points in terms of this tender (To be completed (To be completed
by the organ of by the tenderer)
state)
At least B-BBEE Level 1 or 2 10 BEE Certificate not limited to
SANAS approved/ Affidavit
(in case of JV, a consolidated
scorecard will be accepted)
At least 51% owned by black 10 Certified copies of ID
Women Documents of the Owners not
older than 3 months
Request For Quotation SCM_2024
Section 5
Pricing and delivery schedule
Bidders are required to complete the attached Pricing Schedule Annexure: ................
1 Prices must be quoted in South African Rand, inclusive of all applicable taxes.
2 Price offer is firm and clearly indicate the basis thereof.
3 Pricing Bill of Quantity is completed in line with schedule if applicable (delete if not applicable).
4 Cost breakdown must be indicated.
5 Price escalation basis and formula must be indicated.
6 To facilitate like-for like comparison bidders must submit pricing strictly in accordance with this price
schedule and not utilise a different format. Deviation from this pricing schedule could result in a bid
being declared non-responsive.
7 Please note that should you have offered a discounted price(s), PRASA will only consider such
price discount(s) in the final evaluation stage on an unconditional basis.
8 Bidders
Health & Safety
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdfbeing requested to do so, PRASA reserves the right to award the business to the next highest ranked
bidder provided that he/she/it is still prepared to provide the required goods at the quoted price.
been established to centrally administer supplier information for all organs of state and facilitate the
verification of certain key supplier information. PRASA is required to ensure that price quotations are
invited and accepted from prospective bidders listed on the CSD. Business may not be awarded to a
Request For Quotation SCM_2024
bidder who has failed to register on the CSD. Only foreign suppliers with no local registered entity need
not register on the CSD. The CSD can be accessed at https://secure.csd.gov.za/.
of the Exposure/Influence Exposure/Influence
3.4 Declaration:
I/We the undersigned ____________________________________________________ (Name) hereby
certify that the PEP/PIP information furnished in this bid document is true and correct. We further certify
that we understand that where it is found that we have made a false declaration or statement in this bid,
terms of section 59 of the Competition Act No and or may be reported to the National
Prosecuting Authority (NPA) for criminal investigation and or may be restricted from conducting
business with the public sector for a period not exceeding ten (10) years in terms of the Prevention
and Combating of Corrupt Activities Act No or any other applicable legislation.
I CERTIFY THAT THE INFORMATION FURNISHED IN PARAGRAPHS 1, 2, 3 and 4 ABOVE IS
[Tick applicable box]
4.6. I, the undersigned, who is duly authorised to do so on behalf of the company/firm, certify that
the points claimed, based on the specific goals as advised in the tender, qualifies the company/
firm for the preference(s) shown and I acknowledge that:
i) The information furnished is true and correct;
ii) The preference points claimed are in accordance with the General Conditions as indicated
in paragraph 1 of this form;
iii) In the event of a contract being awarded as a result of points claimed as shown in
paragraphs 1.4 and 4.2, the contractor may be required to furnish documentary proof to the
satisfaction of the organ of state that the claims are correct;
iv) If the specific goals have been claimed or obtained on a fraudulent basis or any of the
conditions of contract have not been fulfilled, the organ of state may, in addition to any other
remedy it may have
(a) disqualify the person from the tendering process;
(b) recover costs, losses or damages it has incurred or suffered as a result of
(c) cancel the contract and claim any damages which it has suffered as a result
of having to make less favourable arrangements due to such cancellation;
(d) recommend that the tenderer or contractor, its shareholders and directors,
or only the shareholders and directors who acted on a fraudulent basis, be
restricted from obtaining business from any organ of state for a period not
exceeding 10 years, after the audi alteram partem (hear the other side) rule
has been applied; and
(e) forward the matter for criminal prosecution, if deemed necessary.
Signature(s) of tenderer(s)
GRASS RYBI BLACK GARDEN SCHEDULE SERVICE & LASHER LASHER11 DESCRIPTION REPAIR&SERVICE REPAIR SUPPLY SUPPLYSection SPECIFICATION/SCOPE BOQ/PRICING
Item NO. 1 2 3 4
Contractual Terms
Source: 10369609 - REQUEST FOR QUOTATION (RFQ) FOR THE APPOINTMENT OF A SERVICE PROVIDER TO REPAIR & SERVICE GRASS CUTTING MACHINE (2).pdfWithout prejudice to any other rights of PRASA under these conditions, the Supplier warrants that the items are in
from defects for a period of one year (unless another period is stated in the Order) from acceptance of the items by
PRASA.
The Supplier indemnifies PRASA against all actions, suits, claims, demands, costs, charges and expenses arising
in connection therewith arising from the negligence, infringement of intellectual or legal rights or breach of statutory
duty of the Supplier, h
workmanship.
The Supplier indemnifies PRASA against claims, proceedings, compensation and costs payable arising out of
infringement by the Supplier of the rights of others, except an infringement which arose out of the use by the
Supplier of things provided by PRASA.
Assignment and sub-contracting
The successful Bidder
prior approval. The contract will be concluded between the successful Bidder and PRASA, therefore, the
successful Bidder and not the sub-contractor will be held liable for performance in terms of its contractual
obligations.
Governing law
The order/contract is governed by the law of the Republic of South Africa and the parties hereby submit to the non-
exclusive jurisdiction of the South African courts.
Special Conditions: Funding Contingency
invite price quotations or bids if no or sufficient provision is made in the budget of the institution.
from paragraph 8.4 of the PFMA SCM Instruction No. /22.
Request For Quotation SCM_2024
this RFQ, which provision and/or budget allocation has not yet been completed at the time of the issuance
of this RFQ.
in this RFQ.
5.1. securing the necessary funding allocation; and
5.2. confirming that sufficient budget exists to meet the intended award.
allocation and budgeting process.
this RFQ at any stage prior to award, in the event that PRASA is unsuccessful in making sufficient provision
and/or budget allocation for the required services.
8.1. any claim, loss, or damages of whatsoever nature arising from or in connection with a failure to source
funding; or
8.2. the non-award of tender due to a failure to source funding; and
8.3. bidders waive any right to institute proceedings against PRASA in respect of the circumstances
contemplated above.
SIGNED at ____________________________ on this _____ day of ________________20
Signature of Witness
1 _____________________________
Name _________________________
Signature of Witness
2 _____________________________
Name _________________________
Name: _______________________________________________________
Designation: __________________________________________________
Request For Quotation SCM_2024
Section 6 sbd4
Any person (natural or juristic) may make an offer or offers in terms of this invitation to bid. In line
with the principles of transparency, accountability, impartiality, and ethics as enshrined in the
Constitution of the Republic of South Africa and further expressed in various pieces of legislation,
it is required for the bidder to make this declaration in respect of the details required hereunder.
Where a person/s are listed in the Register for Tender Defaulters and / or the List of Restricted
Suppliers, that person will automatically be disqualified from the bid process.
2.1 Is the bidder, or any of its directors / trustees / shareholders / members / partners or any person
having a controlling interest1 in the enterprise,
employed by the state? YES/NO
2.1.1 If so, furnish particulars of the names, individual identity numbers, and, if applicable, state
employee numbers of sole proprietor/ directors / trustees / shareholders / members/ partners or
any person having a controlling interest in the enterprise, in table below.
Full Name Identity Number Name of State
institution
2.2 Do you, or any person connected with the bidder, have a relationship with any person who is
employed by the procuring institution? YES/NO
2.2.1 If so, furnish particulars:
2.3 Does the bidder or any of its directors / trustees / shareholders / members / partners or any person
having a controlling interest in the enterprise have any interest in any other related enterprise
whether or not they are bidding for this contract? YES/NO
2.3.1 If so, furnish particulars:
1 the power, by one person or a group of persons holding the majority of the equity of an enterprise,
alternatively, the person/s having the deciding vote or power to influence or to direct the course and decisions
of the enterprise.
Request For Quotation SCM_2024
2 or Prominent
3 and related individuals in their organization and/or beneficial owners /
shareholders who are PEP/PIP.
PRASA reserves the right not to enter into a business relationship with such person, official or entity,
provided there are objective factors that justify the conclusion of such business relationship, and the
decision is based on achieving the best interest of PRASA.4
3.1 Is the bidder a PEP/PIP? YES/NO
3.2 Does the bidder have an existing relationship with a PEP/PIP? YES/NO
3.3 Where a relationship with a PEP/PIP exists, the bidder is required to furnish particulars of the nature
of the exposure, term of the office and description of activities relating to exposure, in table below.
Name of PEP/PIP & Nature Term of the office Description of activities relating to
of the Exposure/Influence Exposure/Influence
3.4 Declaration:
I/We the undersigned ____________________________________________________ (Name) hereby
certify that the PEP/PIP information furnished in this bid document is true and correct. We further certify
that we understand that where it is found that we have made a false declaration or statement in this bid,
PRASA may disqualify our bid or terminate a contract we may have with PRASA where we are successful
in this tender.
Signature Date
Position Name of bidder
2 Both foreign and domestic politically exposed person as specified in Schedule 3A and 3B of the Financial
Intelligence Centre Act No. as amended. (refer to Annexure 2 of the PRASA Code of Conduct for
dealing with Politically Exposed Persons, Prominent Influential Persons and Related Parties).
3 As reflected in Schedule 3C of the Financial Intelligence Centre Act No. (refer to Annexure 2.1.2
of the PRASA Code of Conduct for dealing with Politically Exposed Persons, Prominent Influential Persons and
Related Parties).
4 Clause 4.5 of the PRASA Code of Conduct for dealing with Politically Exposed Persons, Prominent Influential
Persons and Related Parties.
Request For Quotation SCM_2024
in connection therewith arising from the negligence, infringement of intellectual or legal rights or breach of statutory
duty of the Supplier, h
workmanship.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
CNR FUEL & HARMONY ROAD - Cor - Johannesburg - 2001
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
2
Last checked
05 Aug 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Key Personnel
💡 Want more tendering tips and strategies?
Explore Our BlogGet deep intelligence on Services: Professional. Unlock full pricing strategies, bid frequency, and historical win rates.