Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Bid(Open-Tender)
Delivery Location
Various Places in the Northwest OU - - Various Places in the Northwest OU -
Organization Type
GOVERNMENT
Published
22 Oct 2026
OCDS Reference
ocds-9t57fa-175187
ESKOM requires the supply and delivery of various line hardware items on an as-and-when-required basis for its north west operating unit, under a five-year contract. Bidders must complete the sdl&i undertaking form and provide valid b-bbee evidence, with preference points awarded under the 90/10 or 80/20 system. The most consequential consideration is the mandatory sdl&i obligations, including a 100% local procurement content target and a 2.5% Retention on every invoice as security for sdl&i performance.
Closing: 13 November 2026 at 10:00 (submission method and address not stated in the document).
Contract duration: Five (5) years, as-and-when-required basis.
Mandatory returnable: SDL&I Undertaking form, signed by the tenderer representative.
B-BBEE evidence: Valid SANAS-accredited certificate, sworn affidavit, or CIPC affidavit is a condition for contract award; Eskom does not accept electronically signed affidavits.
Preference points: B-BBEE status level determines specific-goal points (max 10 under 90/10 or 20 under 80/20); non-compliant bidders score 0 for specific goals and can only score out of 90/80 for price.
SDL&I obligations: 100% local procurement content target; B-BBEE improvement plan due within 30 days of contract signing; quarterly SDL&I compliance reports.
SDL&I penalties and security: 2.5% penalty on invoice amount or contract value for non-compliance; 2.5% of every invoice (excluding VAT) retained as security until all SDL&I obligations are fulfilled.
Not applicable to this tender: designated sector local content thresholds, CIDB skills development, NIPP (import content below USD 5 million), and mandatory subcontracting (contract value below R30 million).
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Check the registered grade against the tender conditions, or estimate a possible grade. Check CIDB registration · Estimate a CIDB grade.
Date & Time
Friday, 13 November 2026 - 10:00
Venue
MS TEAMS
Categories
Request for Bid(Open-Tender)
Various Places in the Northwest OU - - Various Places in the Northwest OU -
Recommended Certifications
Having these can improve your winning chances: SABS Product Certification, NRCS Certification
AI Document Analysis Stages
Description
22 Oct
2026
Tender Published
Tender was published
27 Nov
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Deviation schedule.pdf
Deviation Schedule-Side Groove Tie.pdf
Eskom requires the supply and delivery of various line hardware items, including the DDT-3080 side groove tie, on an 'as and when required' basis for a period of five years. The tender is issued by Eskom in the North West province.
Drawing 3039.pdf
3228.pdf
Supply and delivery of various line hardware items, specifically full tension automatic joints for conductors, on an as-and-when-required basis for a five-year period. The items must meet Eskom drawing D-DT-3228 and SANS 61284 standards, with specific conductor diameter ranges and colour coding.
ALTMP_PFS_21.pdf
Supply and delivery of various line hardware items, specifically armour rods, helically formed for HARE/OAK conductors, on an as-and-when-required basis for a period of five years. The procurement is issued by Eskom for its North West province operations.
Deviation schedule DDT3228.pdf
Supply and delivery of various line hardware items, including full tension joints, on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
Spec Sheet.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years. The items include wedge-type strain clamps and wireform-type strain grips for aerial bundle conductors, with specific sizes and colour coding for bare and insulated neutral conductors.
Deviation Schedule DDT 3067.pdf
Supply and delivery of various line hardware items, including strain clamps and strain grips, on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
Line Hardware - service contract SHE Spec -01-10-2026 revised.pdf
Supply and delivery of various line hardware items to Eskom's Gemma Cluster in the North West Operating Unit on an as-and-when-required basis for five years. The contract is categorised as low-risk services and includes a comprehensive SHE specification with strict compliance, medical surveillance, and reporting obligations.
RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3065.pdf
Supply and delivery of various line hardware items for Eskom Distribution networks on an 'as and when required' basis for a period of five years. The tender covers a range of distribution systems hardware and fittings, with technical evaluation conducted in four progressive levels: mandatory gatekeeper criteria, functional scoring, product sample assessment, and factory assessment and verification.
3058.pdf
Supply and delivery of various line hardware items, specifically parallel groove (P/G) clamps, for Eskom on an 'as and when required' basis over a five-year period. The tender covers multiple SAP material numbers with detailed technical specifications for aluminium-to-aluminium and aluminium-to-copper clamps, including specific bolt, washer, and torque requirements.
ALTMP_PFS_22.pdf
Eskom Distribution requires the supply and delivery of various helically formed line hardware items on an “as and when required” basis for a period of five years. The hardware includes top groove ties, side groove ties, dead ends, guy strain terminations, armour rods, line splices, pole top stay make-offs, arcing horns, and road crossing ties, all meeting Eskom’s technical specification 240-75883388 (revision 1).
Tech Schedule.pdf
Supply and delivery of various line hardware items, specifically crimping copper lugs, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
Technical Schedules A and B D 3065 SAP 402511.pdf
Supply and delivery of various line hardware items, specifically dead end helically formed fittings for HARE/OAK conductors, on an as-and-when-required basis for a period of five years. The contract is issued by Eskom for its North West province operations.
Deviation Schedule D3098.pdf
Supply and delivery of various line hardware items, including non-tension joints, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
ROD THRDD.pdf
STEEL GRADES AND WELDING REQUIREMENTS.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years. The tender is issued by Eskom in the North West province, with a closing date of 27 November 2026.
COMMON BASE AND STANDARD PASSIVE UNITS FOR SINGLE PHASE 230V SERVICE CONNECTIONS.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years, in the North West province. The tender includes the provision of common bases and standard passive units for single-phase 230V service connections, which must comply with the technical standard 240-75660815.
Deviation Schedule D3008.pdf
Supply and delivery of various line hardware items, including a suspension cradle clamp (SAP No. 0168534), on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
ALTMP_PFS_14.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years. The tender is issued by Eskom in the North West province and requires compliance with Eskom's colour coding standard for line hardware, including helical wire form products, to be applied to overhead line conductors.
D3067.pdf
Supply and delivery of various line hardware items, including wedge-type strain clamps and helically formed distribution grips for concentric cable, on an as-and-when-required basis for a period of five years. The items must meet specified technical standards and Eskom drawing requirements.
Test Report Schedule 3089pdf.pdf
Supply and delivery of various line hardware items, including a MISPAN full tension joint set, on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
Test Report Schedule DDT3067.pdf
Supply and delivery of various line hardware items, including wedge-type strain clamps and helically formed distribution grips, for Eskom on an 'as and when required' basis over a five-year period, in the North West province.
ALTMP_PFS_20.pdf
Supply and delivery of various line hardware items, specifically armour rods, helically formed for FOX/35 conductors, on an as-and-when-required basis for a period of five years. The procurement is issued by Eskom and requires compliance with Eskom specification D-DT 3064, including mechanical, marking, and packaging requirements.
D3067.pdf
Supply and delivery of various line hardware items, including wedge-type strain clamps and helically formed distribution grips for concentric cable, on an 'as and when required' basis for a period of five years. The items must meet specified technical standards and Eskom drawing requirements.
Drawing.pdf
Supply and delivery of various line hardware items, including crimping copper lugs, on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf
Supply and delivery of various line hardware items, specifically strain clamps, suspension clamps and pole fittings for 6 mm² and 10 mm² tinned copper and GSW concentric service cable, on an as-and-when-required basis for a period of five years. The contract is issued by Eskom Distribution and requires compliance with the particular requirements standard 240-170000399, including slippage and fire hazard tests.
DSP_34-194.pdf
Supply and delivery of various line hardware items for Eskom in North West on an as-and-when-required basis over five years. The specification covers helically formed line hardware for MV and LV overhead lines, including top and side groove ties, dead ends, guy strain terminations, armour rods, line splices, pole top stay make offs, arcing horns and road crossing ties. Closing date: 27 November 2026 at 12:00.
Deviation Schedule D3008.pdf
Supply and delivery of various line hardware items to Eskom in the North West on an as-and-required basis over a five-year period. The specification covers items such as a suspension cradle clamp, 8.0–18.0, D3008 (SAP No. 0168534).
Deviation Schedule.pdf
Eskom requires the supply and delivery of various line hardware items in North West on an as-and-when-required basis for a period of five years. Bidders may offer deviations to the specification using the D-DT 3060 deviation schedule, supported by reasons and evidence that the proposed deviation is at least more cost-effective than Eskom's specification.
Life-Saving Rules (1).pdf
Supply and delivery of various line hardware items to Eskom in the North West province on an "as and when required" basis over a period of five years. Work performed under the contract is subject to Eskom's Life-Saving Rules, which apply to contractors, their employees and visitors at all Eskom sites.
3228.pdf
Supply and delivery of various line hardware items, specifically midspan full tension automatic joints, for Eskom in North West on an as-and-when-required basis over five years. The joints are required for specified conductor types and diameters, with conductor colour codes, jointing compound, and individual sealed plastic bag packaging. Bids close on 27 November 2026 at 12:00.
Technical Schedules A and B.pdf
Eskom requires the supply and delivery of various line hardware items, including shackles (straight pin type 70kN), on an as-and-when-required basis for a period of five years. The shackle must comply with Eskom DDT 3010 and be supplied with an M16 clevis pin and hump back split pin.
Technical Schedule A and B for Grip, Strain.pdf
Supply and delivery of various line hardware items, specifically GRIP, STRAIN O/H 35SQ B/NTRL ABC D, for Eskom on an as-and-when-required basis over five years. The item must comply with Eskom D-DT 3060 Buyer's Guide drawing and meet specified mechanical, marking and packaging requirements. Tender documentation and samples are required.
3065.pdf
Supply and delivery of various line hardware items — helically formed dead ends in aluminium alloy and galvanised steel — to Eskom on an "as and when required" basis over a period of five years. Items are conductor-specific, each identified by an Eskom SAP material number and manufactured to Eskom drawing D-DT-3065.
Deviation Schedule D3089.pdf
Supply and delivery of various line hardware items for Eskom in North West on an as-and-when-required basis over five years. The scope includes the DDT-3089 MISPAN full tension joint set. Bidders may propose deviations to the specification, provided reasons and cost-effectiveness evidence are supplied.
Test report Schedule DDT 3039.pdf
Supply and delivery of various line hardware items to Eskom in the North West province on an "as and when required" basis over a period of five years. Bidders must submit test reports for the selected SAP number against the SANS 50483 series and sign the test report schedule to bind themselves to compliance with the standard requirements.
Test report Schedule DDT 3039.pdf
Supply and delivery of various line hardware items to Eskom in the North West province on an "as and when required" basis over a five-year period. Bidders must submit test reports for insulation piercing connectors (D-DT 3039) against the specified SANS 50483 test schedule for the selected SAP number.
Technical Schedules A and B for.pdf
Supply and delivery of various line hardware items to Eskom on an "as and when required" basis over a five-year period, with the contract covering the North West province.
Helically formed hardware-Standard.pdf
Supply and delivery of helically formed line hardware for Eskom's low and medium-voltage overhead power lines in the North West province, on an "as and when required" basis over a five-year period, closing 27 November 2026 at 12:00. The scope covers top and side groove ties, dead ends, guy strain terminations, armour rods, one and three part line splices, pole top stay make-offs, arcing horns and road crossing ties, with minimum requirements and acceptance tests specified for each.
3074.pdf
Supply and delivery of various aluminium line-hardware terminal lugs and connectors for Eskom in North West on an as-and-when basis over five years. The scope covers five SAP-listed lug/connector types for specific conductor sizes, with jointing compound, caps and individual sealed packaging.
Test Report Schedule D-DT 3065.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years, with the contract located in the North West province.
OUTDOOR LOW VOLTAGE PORCELAIN.pdf
Supply and delivery of various line hardware items, including outdoor low voltage porcelain shackle insulators, for Eskom on an 'as and when required' basis over a five-year period. The insulators must comply with Eskom standard 240-75883900, covering design, testing, and quality requirements for S.05 and S.2 types.
Eskom Drawing D3008.pdf
Supply and delivery of various line hardware items for Eskom on an "as and when required" basis for a period of five years.
Technical.zip
PR.zip
Supply and delivery of various line hardware items for Eskom on an “as and when required” basis for five years. The technical specifications cover current-carrying compression fittings for overhead reticulation systems (1 kV to 33 kV, ACSR/AAAC conductors up to 120 mm²) and fittings for bare neutral aerial bundled conductors, including mandatory type, sample and routine tests.
SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf
Eskom requires the supply and delivery of various line hardware items on an as-and-when-required basis for the North West Operating Unit, under a five-year contract. The tender includes SDL&I (Supplier Development and Localisation) obligations, with preference points awarded for B-BBEE status and specific goals.
SHACKLE STRAIGHT PIN TYPE 70kN D3010.pdf
PASSIVE BASE UNIT, ED AND PASSIVE BASE UNIT, ECU, COVER.pdf
STAPLE GALVANISED WIRE 40LG X 4WD D3129.pdf
line Hardware NW BOQ - ITT.xlsx
Supply and delivery of various line hardware items — cable glands, connection lugs, joints, armour rods, ties, clamps, connectors, earth rods, wire, plates, bolts, nuts, brackets and related fittings — to Eskom on an "as and when required" basis over a five-year period in the North West province.
ABC Schedule DDT3067.pdf
Eskom requires the supply and delivery of overhead line strain clamps and strain grips on an as-and-when-required basis over a five-year period, covering four SAP-numbered items: strain clamps for 4/10 mm and 10/16 mm conductor cable, and strain grips for 4 mm and 10 mm square conductor. The goods must conform to Eskom Buyer's Guide drawing DDT-3067 and associated Eskom and NRS specifications, with full test evidence and technical particulars declared by the bidder.
Technical Schedule Clamp IPC D3039.pdf
Supply and delivery of various line hardware items — bimetallic insulation piercing connector (IPC) clamps and aluminium/copper tee run connectors — to Eskom on an "as and when required" basis over a five-year period, in the North West province.
D DT 3127_ Test Report Schedule.pdf
Supply and delivery of various line hardware items, including non-metallic LDPE/HDPE pipe, for Eskom in North West on an as-and-when-required basis over five years. Bidders must provide type test certificates and reports demonstrating compliance with SANS 4427-1:2008 for the listed pipe properties.
ALTMP_PFS_11.pdf
Supply and delivery of various line hardware items to Eskom on an as-and-when-required basis for a period of five years.
3089.pdf
Supply and delivery of various line hardware items, specifically midspan full tension joint sets and a crimp ferrule for ABC line hardware, to Eskom in North West on an as-and-when basis for a period of five years.
D3008.pdf
Eskom requires the supply and delivery of various line hardware items, including suspension cradle clamps, on an as-and-when-required basis over five years. The documented scope covers two suspension cradle clamp variants with conductor ranges of 8.0–18.0 mm and 15.0–24.4 mm, supplied complete with associated pins, washers, U-bolts, nuts and keepers. Delivery is in the North West province.
3098.pdf
Supply and delivery of various line hardware items, specifically non-tension bi-metal and aluminium joints, for Eskom on an 'as and when required' basis over a five-year period. The tender is issued by Eskom in the North West province.
3075.pdf
Supply and delivery of various line hardware items to Eskom in North West on an "as and when required" basis over a period of five years. The specification covers, among other items, a UV-stabilised nylon 66 cable tie strap measuring ±8mm wide x ±270mm long, manufactured to Eskom drawing D-DT-3075.
Eskom Drawing D3008.pdf
Supply and delivery of various line hardware items to Eskom in the North West province on an "as and when required" basis over a five-year period. Eskom drawing D-DT-3008 is referenced, and is expressly not issued for manufacturing purposes.
SIGN DANGER.pdf
Supply and delivery of various line hardware items — danger signs and self-adhesive danger decals — to Eskom in the North West on an "as and when required" basis over a period of five years. All items are manufactured to Eskom drawing D-DT-3202 and specified by SAP material number.
TECHNICAL BULLETIN.pdf
Eskom requires supply and delivery of various line hardware items in North West on an as-and-when-required basis for five years. The specified danger sign is a self-adhesive decal, item SIGN,DANGER DECAL ELECT SYMB 80x70 D3202, under Eskom drawing D-DT-3202 and SAP number 0236654, intended primarily for control cubicles of auto-reclosers, capacitor banks and voltage regulators.
ALTMP_PFS_23.pdf
Supply and delivery of various line hardware items for Eskom on an as-and-when-required basis over five years in North West. Bids close on 27 November 2026 at 12:00.
Technical Criteria For Procurement.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years. The tender is issued by Eskom's Gauteng Operating Unit and covers a split meter readyboard retrofit product, with technical evaluation based on mandatory criteria and drawings.
ALTMP_PFS_13.pdf
Supply and delivery of various top groove tie line hardware items for Eskom on an as-and-when-required basis over a five-year period. The tender covers 15 SAP-numbered items, each requiring compliance with Eskom drawing DDT-3081 and specific technical, packaging, and identification requirements.
Technical Schedules A and B.pdf
Supply and delivery of various metallic adjustable cable glands (D3070) for Eskom on an as-and-when-required basis for a period of five years. The tender covers multiple SAP numbers for compression and adjustable cable glands, with compliance to SANS 1213 and Eskom drawing D-DT 3070.
32-95 Occupational Health and Safety Incident Management Procedure (2).pdf
Supply and delivery of various line hardware items to Eskom on an 'as and when required' basis for a period of five years. The tender is issued by Eskom Holdings SOC Ltd and applies to the North West province. The closing date is 27 November 2026 at 12:00.
240-75883122 - Fittings for Bare Neutral Aerial Bundled Conductor D3089.pdf
Supply and delivery of various line hardware items for aerial bundled conductor (ABC) systems, specifically fittings for bare neutral conductors, on an 'as and when required' basis over a five-year period. The contract is issued by Eskom for its Distribution Group and requires compliance with Eskom Standard 240-75883122 and related NRS and French (NF C) specifications.
ALTMP_PFS_17.pdf
Supply and delivery of various line hardware items, specifically DDT-3081 Top Groove Tie, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
Copy of Line Hardware SAP numbers.xlsx
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years. The items include cable glands, connectors, lugs, joints, armour rods, ties, clamps, earth rods, and associated hardware, each identified by SAP material numbers.
Technical Schedule Clamp IPC D3039.pdf
Supply and delivery of various line hardware items, including insulation piercing connectors and tee connectors, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
1076237191.zip
Supply and delivery of various line hardware items, including side groove ties and top groove ties, on an as-and-when required basis for a period of five years, to Eskom in the North West province.
Supplier Declaration of Interest Template.docx
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years, with the tender managed in the North West province.
Technical Schedule D3171.pdf
3089.pdf
Supply and delivery of various line hardware items, specifically midspan full tension joint sets and ferrules for aerial bundled conductors (ABC), on an as-and-when-required basis for a period of five years. The goods must comply with Eskom drawing D-DT-3089 and the specified material, corrosion, and standard specifications.
ROD ANCHR NON ADJUST 34KN.pdf
STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years. The tender is issued by Eskom in the North West province, with a closing date of 13 November 2026 at 12:00. The associated technical standard specifies steel grades and welding requirements for steelwork and overhead line hardware components.
Drawing 3039.pdf
3127.pdf
Eskom requires the supply and delivery of various non-metallic line hardware items, specifically LDPE and HDPE pipes, on an as-and-when-required basis for a period of five years. The items include pipes for LV ABC termination, covering of squirrel, fox, mink, and hare jumpers, covering of chickadee and kingbird jumpers, earth lead down wires, and down pole pipes for concentric cable. Delivery is to the North West province.
Schedules A and B D 3098.pdf
Supply and delivery of various non-tension joint line hardware items to Eskom on an 'as and when required' basis for a period of five years. The tender covers 14 specific SAP-numbered items, each requiring compliance with Eskom drawing DDT-3098 and submission of technical schedules A and B.
Deviation Schedule for Clamps IPC.pdf
Supply and delivery of various line hardware items, including insulation piercing connectors, to Eskom on an as-and-when-required basis for a period of five years. The tender is issued by Eskom in the North West province.
PASSIVE BASE UNIT, ED AND PASSIVE BASE UNIT, ECU, COVER - Copy.pdf
Line Hardware Invitation to Tender (ITT).pdf
Supply and delivery of various line hardware items, including IPC, LV cable accessories, and copper-clad steel conductors used for earthing, on an as-and-when-required basis for a period of five years.
ALTMP_PFS_1.pdf
Supply and delivery of various line hardware items for Eskom on an as-and-when-required basis for a period of five years. The contract covers items such as those requiring visual examination, dimensional and material verification, grit retention testing, and tensile testing, with reference to specification clause 4.3.
Test Schedule D3008.pdf
Supply and delivery of various line hardware items, including a suspension cradle clamp (SAP No. 0168534), on an 'as and when required' basis for a period of five years, for Eskom in the North West province.
Deviation Schedule.pdf
Supply and delivery of various line hardware items, including D3070 Metallic Adjustable Cable Glands, on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
Technical Schedules A and B.pdf
Supply and delivery of various line hardware items on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
Technical Schedules A and B- Side Groove Tie.pdf
Supply and delivery of various side groove tie line hardware items for Eskom, on an as-and-when-required basis for a period of five years. The tender covers 13 SAP-numbered items, each with specific conductor and insulator compatibility, and requires compliance with Eskom drawing DDT-3080.
ST_240-75882302 Rev 1.pdf
Supply and delivery of various line hardware items, specifically full tension automatic system fittings for overhead lines, on an 'as and when required' basis for a period of five years. The fittings must comply with Eskom's standard 240-75882302, covering mid-span joints and dead-ends for specified bare conductors (AAAC, ACSR, ABC neutral, copper) on medium-voltage lines up to 33 kV.
ABC Schedule DDT3067.pdf
Supply and delivery of various line hardware items, specifically strain clamps and strain grips for overhead conductors, on an 'as and when required' basis for a period of five years, for Eskom.
RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdf
Supply and delivery of various line hardware items for Eskom Distribution networks on an as-and-when-required basis for a period of five years. The tender covers a range of distribution systems hardware and fittings, each with specific technical standards and testing requirements. Evaluation is staged, with mandatory, functional, sample, and factory assessment levels.
3039.pdf
Supply and delivery of various line hardware items, specifically insulation piercing connectors (IPCs) for aerial bundle and insulated conductors, on an as-and-when-required basis for a five-year period. The procurement is issued by Eskom in the North West province.
Technical Schedules A and B D3089.pdf
Supply and delivery of various line hardware items, specifically MISPAN full tension joint sets and ferrules, for Eskom on an as-and-when-required basis over a five-year period. The tender covers seven SAP numbers with specific technical requirements for insulated and bare conductors.
Fittings for Bare Neutral Aerial Bundled Conductor.pdf
Supply and delivery of various line hardware items, specifically fittings for bare neutral aerial bundled conductor (ABC) systems, on an 'as and when required' basis for a period of five years. The fittings must comply with Eskom standard 240-75883122, which references NRS 018 and French NF C specifications, and includes suspension clamps, strain clamps, connectors, lugs, tension joints, and associated items.
240-75883110 Current-Carrying Compression Fittings for Overhead Reticulation Systems D3098.pdf
Eskom requires the supply and delivery of various line hardware items, specifically current-carrying compression fittings for overhead reticulation systems, on an 'as and when required' basis for a period of five years. The fittings must meet detailed technical specifications covering design, materials, testing, and quality assurance.
Deviation Schedule for Clamps IPC.pdf
Supply and delivery of various line hardware items, including insulation piercing connectors, on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
Test report Schedule DDT 3039.pdf
Supply and delivery of various line hardware items, specifically insulation piercing connectors, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
Deviation schedule.pdf
Supply and delivery of various line hardware items, including crimping copper lugs, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
3039.pdf
Supply and delivery of various line hardware items, specifically insulation piercing connectors (IPCs) for aerial bundle and insulated conductors, on an as-and-when-required basis for a five-year period. The procurement is issued by Eskom for the North West province, with items specified under Eskom drawing D-DT-3039 and various SAP material numbers.
Technical Schedules A and B D 3065 SAP 402521.pdf
Supply and delivery of various line hardware items, including DEAD END, HELICALLY FORMED FOX/35 fittings, on an as-and-when-required basis for a five-year period. The tender is issued by Eskom for its North West province operations, requiring compliance with technical schedules A and B and Eskom specifications.
Fittings for Bare Neutral Aerial Bundled Conductor.pdf
Eskom Distribution requires the supply and delivery of various line hardware items for bare neutral aerial bundled conductor (ABC) systems, on an 'as and when required' basis for a period of five years. The tender covers standardized fittings such as suspension clamps, strain clamps, insulation piercing connectors, tension joint sets, lugs, and related accessories, with compliance to Eskom standard 240-75883122 and alternative French NF C specifications.
Test Schedule D3008.pdf
Supply and delivery of various line hardware items, specifically a suspension cradle clamp (SAP No. 0168534), on an as-and-when-required basis for a five-year period. The procurement is issued by Eskom for its North West province operations.
E-tendering Help Manual for supplier - 27 January 2025 (1).docx
Supply and delivery of various line hardware items for Eskom on an as-and-when-required basis for a period of five years. The tender is managed through Eskom's eTendering system, requiring electronic submission of all documents.
Test Schedule Clamps IPC.pdf
Supply and delivery of various line hardware items, specifically insulation piercing connectors, on an as-and-when-required basis for a five-year period, for Eskom in the North West province.
Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf
Supply and delivery of various line hardware items, specifically strain clamps, suspension clamps and pole fittings for 6 mm² and 10 mm² tinned copper and GSW concentric service cable, on an as-and-when-required basis for a five-year period. The fittings must comply with Eskom's particular requirements standard 240-170000399, including slippage and fire hazard tests.
3102.pdf
Supply and delivery of various crimping lugs (tinned electrolytic copper) for Eskom, on an as-and-when-required basis for a period of five years. The tender covers a range of lug sizes from 2.5mm² to 500mm², with M6, M12, and M16 fixing holes, all to Eskom drawing D-DT-3102.
TECHNICAL EVALUATION.pdf
Eskom Distribution requires the supply and delivery of various line hardware items on an as-and-when-required basis for a five-year period. The tender is evaluated through a four-level technical process covering documentation, scoring, product samples, and factory assessment, with strict compliance thresholds at each stage.
Test Report Schedule 3089pdf.pdf
Supply and delivery of various line hardware items, including a MISPAN full tension joint set, on an as-and-when-required basis for a period of five years. The tender is issued by Eskom for the North West province.
Drawing 3039.pdf
240-12248652_List of Tender Returnables_Cat 2_ Rev 7.docx
Eskom requires the supply and delivery of various line hardware items on an "as and when required" basis for a period of five years in the North West province. Bids close on 27 November 2026 at 12:00. Bidders are evaluated on quality management system evidence, contract quality planning and demonstrated commodity experience.
Fittings for Bare Neutral Aerial Bundled Conductor.pdf
Eskom requires the supply and delivery of various line hardware items — bare neutral aerial bundled conductor (ABC) fittings — on an "as and when required" basis for a period of five years, for use across Eskom Holdings Limited Divisions in the North West province. Supply is governed by Eskom standard 240-75883122 Rev 3, which lists the standard fittings and the applicable NRS and NF C specifications.
PASSIVE BASE UNIT, ED AND PASSIVE BASE UNIT, ECU, COVER.pdf
Test Schedule Clamps IPC.pdf
Supply and delivery of various line hardware items to Eskom in the North West province on an "as and when required" basis over a five-year period. Bidders must submit test reports for the selected SAP number covering insulation piercing connectors to the D-DT 3039 specification. Bids close on 27 November 2026 at 12:00.
Standard.pdf
Supply and delivery of various line hardware items, including helical wire form products, for Eskom overhead line conductors on an "as and when required" basis over a period of five years. All supplied hardware must carry the conductor-specific colour coding set out in Eskom's colour coding standard for line hardware.
COMMON BASE AND STANDARD PASSIVE UNITS FOR SINGLE PHASE 230V SERVICE CONNECTIONS.pdf
Supply and delivery of various line hardware items to Eskom in the North West province on an "as and when required" basis over a period of five years. The technical scope covers common bases and standard passive units (SPU) for single-phase 230 V service connections, supplied in three standard configurations.
TECHNICAL EVALUATION CRITERIA FOR LV CABLE ACCESSORIES.pdf
Supply and delivery of various line hardware items — LV cable accessories — to Eskom on an as-and-when-required basis over a five-year period. The technical evaluation criteria cover cable joints, cable terminations, cable ends and tubing, lugs and ferrules, and cable glands, assessed through documentation, factory and factory-sample evaluation.
RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS.pdf
Supply and delivery of various line hardware items for Eskom Distribution networks, procured on an "as and when required" basis over a five-year period. Bidders are assessed through four progressive technical evaluation levels covering mandatory returnables, scored functional criteria, product samples and, where applicable, a factory assessment.
Technical Schedules A and B for.pdf D3127.pdf
Supply and delivery of various line hardware items, specifically HDPE non-metallic pipes in 20 mm and 25 mm sizes, for Eskom in North West on an as-and-when-required basis over five years. The technical schedules cover Schedule A purchaser-specific requirements and Schedule B guarantees and technical particulars for SAP numbers 163530 and 241943.
Drawing and Test Report Schedule LV cable Accessories.pdf
Supply and delivery of various line hardware items, including LV cable accessories, for Eskom in North West on an as-and-when-required basis over five years. Bids close on 27 November 2026 at 12:00 South African Standard Time.
THIMBLE, ST TO FIT 14 WIRE.pdf
STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK AND OVERHEAD LINE HARDWARE COMPONENTS.pdf
Supply and delivery of various line hardware items to Eskom on an "as and when required" basis over a five-year period, in the North West province. Manufactured steelwork and overhead line hardware must meet Eskom's steel grade selection and welding standard, covering material grades, welding, heat treatment, galvanising and testing.
Deviation schedule DDT3228.pdf
Supply and delivery of various line hardware items, including full tension joints (item D3228), to Eskom in the North West on an as-and-required basis over a five-year period. Pricing and specification compliance are handled through an A & B schedule, with a separate deviation schedule for any item offered against the stated specification.
Technical Schedules A and B D3089.pdf
Supply and delivery of various line hardware items — Mispan full tension joint sets and pre-insulated aluminium ferrules — to Eskom on an as-and-when-required basis over a five-year period. Bidders must complete Schedules A and B for each of the seven listed SAP numbers and confirm adherence to the latest published revision of Eskom drawing DDT-3089. Bids close on 27 November 2026 at 12:00.
Schedules A and B D3228.pdf
Supply and delivery of various line hardware items, specifically full tension joints under D3228, to Eskom in North West on an as-and-when-required basis for five years. Bidders must complete technical Schedules A and B per SAP number and submit manufacturer drawings, test reports and signed test schedules.
SPECIFICATION FOR NON-METALLIC CABLE GLANDS STANDARD.pdf
Supply and delivery of various line hardware items to Eskom in the North West province on an "as and when required" basis over a five-year period. Non-metallic cable glands supplied under this arrangement must comply with Eskom specification 240-75660817 Revision 3, which covers glands used for cable entry into electrical enclosures on pole-top distribution boxes and other outdoor equipment.
Deviation schedule D-DT 3065.pdf
Supply and delivery of various line hardware items to Eskom in the North West province, on an "as and when required" basis over a five-year period. Quantities are not fixed; call-offs are made against the contract as needs arise.
OHS Tender Evaluation low risk work - Line hardware.pdf
Supply and delivery of various line hardware items for Eskom in North West on an as-and-when-required basis for five years. Bidders must meet OHS returnable requirements and, where certified for an auditable OHS system, submit Part B SHE and vehicle records. The closing date is 27 November 2026 at 12:00.
NUT,HX GALV M6 D3173.pdf
ALTMP_PFS_16.pdf
Supply and delivery of various line hardware items to Eskom on an "as and when required" basis over a five-year period, with the North West province as the delivery area. Bidders price against an A & B Schedule and record any specification deviations on a deviation schedule.
PLATE STAY M12 300.pdf
SPINDLE SHORT M20x50 REGULAR SHANK D3050.pdf
Test Report Schedule D3098.pdf
Supply and delivery of various line hardware items to Eskom in the North West on an "as and when required" basis over a period of five years. Bidders must submit test reports for the selected SAP number covering non-tension joints.
Eskom_-_Standard_Conditions_of_Tender_-_30_January_2025 - JAN 2030.pdf
Supply and delivery of various line hardware items to Eskom in the North West province, on an "as and when required" basis over a period of five years. Orders are called off against the contract rather than supplied in a single fixed quantity.
D-DT-3075 - Tech Schedule - Cable tie.pdf
Supply and delivery of various line hardware items to Eskom on an "as and when required" basis over a five-year period. The technical schedule covers cable ties under SAP 168521 (270 mm x 8 mm, UV-stable, to Eskom DDT-3075 and NRS020), with Schedule A and Schedule B to be completed per SAP number. Bids close on 27 November 2026 at 12:00.
SPEC SHEET.pdf
Supply and delivery of various line hardware items, with the technical schedule covering cable glands, for Eskom on an as-and-when-required basis over five years. The glands span non-metallic, metallic compression and adjustable metallic types in multiple sizes, to be manufactured to Eskom Drawing D-DT-3070 and specified SANS/Eskom standards.
240-75883128 Rev 2 AL_AL 3058.pdf
Supply and delivery of parallel groove (PG) clamps (aluminium-to-aluminium) for low and medium voltage overhead power lines, for Eskom's Distribution Division, on an "as and when required" basis over a period of five years. The clamps must be manufactured to Eskom drawing D-DT 3058 and comply with SANS 61284, SANS 9227 and the associated Eskom specification.
240-75883122 - Fittings for Bare Neutral Aerial Bundled Conductor D3089.pdf
Supply and delivery of various line hardware items — bare neutral aerial bundled conductor (ABC) fittings — to Eskom on an "as and when required" basis over a five-year period, for use in the North West province. The scope covers uninsulated (bare) neutral ABC fittings used in Distribution Group's low-voltage overhead reticulation.
ALTMP_PFS_12.pdf
Supply and delivery of various line hardware items, specifically side groove ties, to Eskom in North West on an as-and-when-required basis for five years. The ties are for bare conductors and type F-neck insulators, with coastal variants in aluminium alloy or stainless steel and inland variants in galvanised steel, conforming to Eskom drawing D-DT-3080 and specified standards.
Schedules A and B D3228.pdf
Supply and delivery of various line hardware items, specifically full tension joints under Eskom standard D3228, on an as-and-when-required basis for a five-year period for Eskom in North West. The scope covers three SAP numbers: 0165580, 0186845 and 0186846.
ALTMP_PFS_18.pdf
Supply and delivery of various line hardware items, specifically top groove ties for bare conductors and F-neck insulators, on an as-and-when-required basis over five years for Eskom. The scope covers inland and coastal variants with specified conductor types, colour codes and material standards.
New Microsoft Word Document.docx
Eskom requires supply and delivery of various line hardware items on an as-and-when-required basis for a five-year period. Bidders must submit a comprehensive OHS compliance pack, including a health and safety plan, baseline risk assessment, COIDA letter, appointments and competencies, fitness and driver documentation, safe work procedures, inspection records and a detailed SHE costing.
ALTMP_PFS_19.pdf
Supply and delivery of various line hardware items for Eskom in North West on an as-and-when-required basis over five years. Bidders must submit test reports covering visual examination and dimensional and material verification under Test Report Schedule D-DT 3064. The bid closes on 27 November 2026 at 12:00.
Spindles and Spindles with.pdf
RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS.pdf
Eskom requires the supply and delivery of various line hardware items for distribution systems on an "as and when required" basis over a five-year period. The procurement is evaluated through a four-level technical process covering mandatory returnables, scored functional criteria, product samples and, where applicable, factory assessment.
240-68099512 Form A_Cat 2_ Rev 9.pdf
Supply and delivery of various line hardware items to Eskom on an "as and when required" basis over a five-year period, with national coverage. Bidders must accept Eskom's supplier quality requirements under specification 240-105658000 and the ISO 9001 standard, and complete and sign the associated quality acknowledgement form.
Technical Schedules A and B Connector Lug.pdf
Supply and delivery of various copper crimping lugs (line hardware items) on an 'as and when required' basis for a period of five years, for Eskom. The tender covers a range of lug sizes and specifications, requiring compliance with Eskom drawings and SANS standards.
NEC SC Line Hardware ITT.doc
Supply and delivery of various line hardware items for the Gemma Cluster on an as-and-when-required basis for a period of five years, under an NEC3 Supply Contract (SC3) with Eskom Holdings SOC Ltd. The contract is rate-based, with rates adjusted for inflation after the first 12 months.
Deviation Schedule for Clamps IPC.pdf
Supply and delivery of various line hardware items, including insulation piercing connectors, on an 'as and when required' basis for a five-year period, for Eskom.
BOLT,PIGTAIL ASSY.pdf
Supply and delivery of various line hardware items, including pigtail bolt assemblies, on an 'as and when required' basis for a five-year period. The procurement is issued by Eskom and is open to national bidders.
240-75883154 COMPRESSION FITTINGS AND CLAMPS FOR OVERHEAD SUB-TRANSMISSION SYSTEMS D3098.pdf
Eskom Distribution requires the design, manufacture, testing, and supply of compression fittings and clamps for bare ACSR, AAAC, and AAC phase conductors and galvanised steel earth wires, used on AC systems from 44 kV up to and including 132 kV. The supply is on an 'as and when required' basis for a period of five years, and fittings must meet the mechanical and electrical criteria detailed in the standard.
ALTMP_PFS_2.pdf
Supply and delivery of various line hardware items, including grip, strain O/H 70 sq B/NTRL ABC, on an as-and-when-required basis for a period of five years, for Eskom, covering the entire Republic of South Africa.
ALTMP_PFS_15.pdf
Supply and delivery of various helically formed line hardware items for Eskom on an “as and when required” basis for a period of five years. The hardware includes top and side groove ties, dead-ends, guy strain terminations, armour rods, line splices, pole top stay make-offs, arcing horns, and road crossing ties, for use on low- and medium-voltage overhead power lines. The hardware must comply with Eskom standard 240-75883388 (formerly DSP 34-194), which sets out material, testing, colour coding, and packaging requirements.
Test Schedule Clamps IPC.pdf
Supply and delivery of various line hardware items, specifically insulation piercing connectors, on an as-and-when-required basis for a five-year period for Eskom in the North West province.
ALTMP_PFS_24.pdf
Supply and delivery of various line hardware items, specifically helically formed armour rod sets, for Eskom on an “as and when required” basis over a five-year period. The items are for use on bare ACACIA/SQUIRREL, MAGPIE, FOX/35, MINK/PINE, and HARE/OAK conductors, and must comply with Eskom drawing D-DT-3064 and specified material and corrosion standards.
NUT, EYE M16 AND M20.pdf
Supply and delivery of various line hardware items, including eye nuts for M16 and M20 bolts, on an as-and-when-required basis for a five-year period. The items must meet specified material, corrosion, and standard specifications, with type testing and certification requirements.
Test Report Schedule.pdf
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis for a period of five years. The contract will be based in the North West province and requires compliance with relevant SANS standards and testing, including fire-resistance, impact resistance, and temperature tests.
Test Report Schedule DDT3067.pdf
Supply and delivery of various line hardware items, including wedge type strain clamps and helically formed distribution grips, on an 'as and when required' basis for a five-year period. The tender is issued by Eskom in the North West province.
ST_240-93022072 Rev 1 AL_CU 3058.pdf
Supply and delivery of various line hardware items, including parallel groove (PG) clamps for aluminium and copper conductors, on an 'as and when required' basis for a five-year period. The clamps must meet Eskom's technical specification 240-93022072, covering design, materials, testing, and documentation requirements.
Deviation Schedule DDT 3067.pdf
Supply and delivery of various line hardware items, including strain clamps and grips, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
Technical Schedules A and B D 3065 SAP 402527.pdf
Supply and delivery of various line hardware items, specifically dead-end helically formed fittings for MINK/PINE conductors, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
Deviation schedule.pdf
Supply and delivery of various line hardware items, including DDT-3075 cable ties, on an 'as and when required' basis for a period of five years, for Eskom in the North West province.
3039.pdf
Supply and delivery of various line hardware items, specifically insulation piercing connectors (IPCs), for Eskom on an “as and when required” basis over a five-year period. The procurement covers multiple SAP material numbers with varying conductor and tap size combinations, all conforming to SANS 50483-4 and Eskom specification 240-75883122.
D DT 3074_Tech Schedule_Aluminium Lug-Indent_Rev1_072021.xls
Supply and delivery of various line hardware items, including aluminium indentation crimp lugs, on an 'as and when required' basis for a period of five years. The contract is issued by Eskom and requires compliance with Eskom drawings and technical specifications, including mandatory test schedules and deviation schedules.
Line Hardware NW 2026.pdf
Supply and delivery of various line hardware items for Eskom's North West operating unit on an 'as and when required' basis for a period of five years. The tender includes an environmental evaluation component with specific documentation requirements.
E-Tenderers E-Tendering Training Acknowledgement Form - 27 January 2025 (1).docx
Supply and delivery of various line hardware items for Eskom on an 'as and when required' basis over a five-year period, with the tender managed through Eskom's e-Tendering solution.
D3008.pdf
Supply and delivery of various line hardware items, specifically cradle-type suspension clamps, on an as-and-when-required basis for a period of five years. The clamps must be manufactured to Eskom drawing D-DT-3008 and comply with the specified SANS, BS EN, and Eskom standards, including type testing to SANS 61284 and DSP 34-1667.
Deviation Schedule D3089.pdf
Supply and delivery of various line hardware items, including the MISPAN full tension joint set, on an as-and-when-required basis for a period of five years, for Eskom in the North West province.
ST_240-75882302 Rev 1.pdf
Supply and delivery of various line hardware items, specifically full tension automatic system fittings for overhead lines, on an 'as and when required' basis for a period of five years. The fittings are for medium-voltage overhead power lines (1 kV to 33 kV) using bare ACSR, AAAC, galvanised steel wire, and copper conductors, supplied to Eskom in the North West province.
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
EskomWin Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubMedian Estimate
R 463 680
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
The document sets out Eskom Distribution Group's particular requirements for standardized strain, suspension and pole fittings for 6 mm2 and 10 mm2 tinned copper and GSW concentric service cable. It includes slippage tests for strain and suspension clamps.
Important Dates
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf (unknown)Closing date: 13 November 2026 at 10:00 (from tender record).
No other dates are stated in the document.
Submission Guidelines
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf (unknown)Returnable documents:
Submission method: Not stated in the document.
Evaluation Criteria
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf (unknown)Bidders must comply with NRS 018-4 or SANS 50483 and Eskom standard 240-170000399.
Bidders must complete Technical Schedules A and B, including test certificates and material properties.
Bidders must list any deviations in the deviation schedule.
No other eligibility criteria (e.g., CSD registration, B-BBEE level, tax clearance) are stated in the provided document.
Technical Specifications
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf (unknown)Scope: Supply and delivery of various line hardware items for strain, suspension and pole fittings for 6 mm2 and 10 mm2 tinned copper and GSW concentric service cable.
Fittings must comply with NRS 018-4 or SANS 50483.
Fittings must be suitable for cable outer diameters:
Minimum breaking load of all fittings: 1.5 kN.
Strain and suspension clamps must pass slippage tests with both 6 mm2 and 10 mm2 tinned copper and GSW concentric service cables.
Rigid polymer fittings may be exempt from accelerated weathering test if they meet:
Eskom may require an assessment of the manufacturer's facility by a rigid polymer expert; costs borne by the manufacturer.
Manufacturer must provide material properties in Schedule B.
Tests:
Marking, labelling and packaging: Not applicable.
Spares: Not applicable.
Quality Management
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf (unknown)All tests specified in NRS 018-4/SANS 50483 must be carried out, except slippage tests. Slippage test procedure and acceptance criteria for strain and suspension clamps: mount two clamps on 3 m cable, apply load to 0.7 kN, settle 5 min, hold 0.7 kN for 15 min, record S1, increase to 1 kN, hold 1 h, record S2. Acceptance: S1 ≤ 2 mm, S2 ≤ S1 + 3 mm. Fire hazard test: all non-metallic parts must pass glow-wire test at 550°C for 30 s per IEC 695-2-1/1.
Compliance Requirements
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf (unknown)Compliance with NRS 018-4 or SANS 50483 is mandatory.
Compliance with Eskom standard 240-170000399 is required.
Manufacturer must provide material properties in Schedule B.
No other compliance requirements (e.g., CSD, tax, B-BBEE) are stated in the document.
Contractual Terms
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdfAnnex B contains Technical Schedules A and B. Schedule A lists purchaser's specific requirements; Schedule B requires guarantees and technical particulars of the equipment offered. No other contractual terms are stated.
Requirements
Source: Particular Requirements for Strain, Suspension and Pole Fittings For 6 MM2 And 10 MM2 Tinned Copper and GSW Concentric Service Cable.pdf (unknown)Strain clamps, suspension clamps and pole fittings must fully comply with NRS 018-4 or SANS 50483. All service cable fittings must be suitable for 6 mm2 and 10 mm2 service cable with outer diameters: 6 mm2: 11.0 to 12.9 mm, 10 mm2: 12.4 to 14.5 mm. Minimum breaking load of all fittings: 1.5 kN. Rigid polymer products may be exempt from accelerated weathering if they meet: tensile strength > 40 MPa, elongation < 120%, non-water soluble filler content < 30%, dielectric strength > 160 Vcm⁻¹ 10⁻³. Manufacturer must provide material properties in Schedule B.
Description
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdfThis document sets out the standard technical evaluation criteria for Eskom Distribution systems hardware and fittings. It covers the evaluation strategy, method, and criteria, including desktop evaluation, product sample evaluation, and Factory Assessment and Verification. Specific item requirements are in the Technical Schedules attached to the Commercial Enquiry.
Submission Guidelines
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdf (unknown)Returnable documents (all must be completed, signed and submitted at tender closing; missing information will not be requested after closing):
Evaluation Criteria
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdf (unknown)Evaluation is progressive; passing each level is a prerequisite for the next. Levels 1 and 2 are evaluated independently by at least 2 evaluators, with consensus reached per procedure 240-48929482.
Technical Specifications
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdf (unknown)Scope: Supply and delivery of various line hardware items for Eskom Distribution systems, on an "as and when required" basis for a period of 5 years.
Methodology
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdfEvaluation methodology:
Experience & Qualifications
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdfExperience requirements:
Quality Management
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdfQuality management requirements:
Compliance Requirements
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdf (unknown)Compliance requirements:
Contractual Terms
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdf (unknown)Contractual requirements are not evaluation criteria but must be met prior to contract award. Deficiencies identified during evaluation (Levels 2, 3, or 4) must be addressed before contracting with the highest ranked supplier. Concessions for deviations may be granted and must be documented with terms of acceptance, limits, and conditions, and included in contract negotiations. Corrective actions for deficiencies must be completed within a stipulated timeframe prior to contract award.
Requirements
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdf (unknown)Mandatory returnables per SAP number: completed and signed Technical A&B Schedules, Deviation Schedules, Manufacturer Drawings, and Test Report Schedules. Deviations must be stated on Deviation Schedules, drawings must have manufacturer's name and approval signature, and test schedules must be complete with 'Not Available' noted for missing tests. Products must comply with latest revisions of relevant standards including ISO 9001, SANS IEC 61284, and Eskom standards.
Section
Source: RP_240-143804436 Rev 2 TECHNICAL EVALUATION CRITERIA FOR ESKOM DISTRIBUTION SYSTEMS HARDWARE AND FITTINGS D3098.pdfAdditional evaluation criteria details:
Description
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdfSupply of outdoor low voltage porcelain shackle insulators for power distribution systems up to 3600 V AC, for new or refurbished overhead power lines and maintenance. Two types specified: S.05 and S.2, with fixed electrical and mechanical characteristics for standardisation.
Submission Guidelines
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)Returnable documents:
Disqualification risks:
Evaluation Criteria
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)Evaluation stages:
No specific scoring split, minimum qualifying score, or preference point system is stated in the provided document.
Technical Specifications
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)Scope:
Types and dimensions (tolerance of 5% on A, B, D; ±0.5 mm on d and R):
Electrical and mechanical requirements (per Table 1):
Markings:
Packaging:
Storage, transport and handling:
Methodology
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)Temperature-cycle test: three cycles of immersion in water at 70–75 °C for 20 minutes, then in ice water at ≤7 °C for 20 minutes; insulators must not break, crack, or craze. Puncture test: immerse in insulating oil, apply voltage between a conductor and bolt; no puncture at specified voltages. Mechanical strength test: mount between parallel straps, apply load per Table 1 for 1 minute without damage. Routine electrical test: apply nominal AC voltage, measure leakage current or impedance until constant reading.
Experience & Qualifications
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)The manufacturer/supplier must have access to engineering facilities to provide technical service, information, advice, and after-sales service related to the products.
Quality Management
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdfQuality assessment per DST34-705. All insulators must be visually examined for defects before testing and packaging; defective units must be marked and discarded. Test certificates for routine production tests must be retained by the supplier. Eskom may randomly select delivered insulators for testing; failure of qualifying design tests leads to rejection of all insulators from that supplier until the issue is resolved. Imported products may require landing tests in South Africa, witnessed by Eskom Quality Management. Type, sample, and routine tests are specified with acceptance criteria per Table 1 and IEC 60383.
Financial Requirements
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)No specific pricing format, bid security, bonds, guarantees, retention, payment terms, or financial capacity thresholds are stated in the provided document.
Compliance Requirements
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)Eligibility:
Quality system:
Testing requirements:
No specific B-BBEE, CIDB, tax, or CSD requirements are stated in the provided document.
Contractual Terms
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdfThe specification does not lessen any obligations in other contract documents. Acceptance by Eskom does not relieve the supplier of responsibility for design adequacy, dimensions, or details. The supplier is liable for insulators damaged due to unsuitable packaging, including chipping of glazed surfaces.
Requirements
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdf (unknown)Supplier must have engineering facilities for technical service and after-sales support. Only insulators accepted by Eskom per DPC34-113 will be procured. Supplier is responsible for design and performance. Submissions for evaluation must be electronic. Samples per DPC34-1474. General arrangement drawings in *.pdf showing dimensions, tolerances, material, mass, fabrication details, mechanical strength, and markings. Insulators must meet specified dimensions and be permanently marked. Packaging must protect against handling and storage; pallets ≤1800 kg, fork lift compatible, marked with project details. Storage, transport, and handling per 240-75906867 (DSP 34-550).
Section
Source: OUTDOOR LOW VOLTAGE PORCELAIN.pdfOnly insulators accepted by Eskom per DPC34-113 will be considered. Quality assessment per DST34-705. Samples and drawings must be submitted. Test certificates from an acceptable authority required. Imported products may require landing tests. No scoring split or minimum score stated.
Submission Guidelines
Source: Deviation schedule.pdf (unknown)Returnable documents:
Evaluation Criteria
Source: Deviation schedule.pdf (unknown)Bidders must complete and sign the A & B Schedule and the Deviation Schedule. Any deviations must be justified as more cost-effective than the specified item. No other eligibility criteria are stated in the provided document.
Technical Specifications
Source: Deviation schedule.pdf (unknown)Item: D-DT-3102 LUG, CRIMPING CU (SAP No. to be specified).
Scope: Supply and delivery of various line hardware items on an 'as and when required' basis for a period of 5 years.
Special Conditions
Source: Deviation schedule.pdf (unknown)Any deviations offered to the specification must be listed with reasons, and evidence must be provided that the proposed deviation is at least more cost-effective than the specified item.
Technical Specifications
Source: Eskom Drawing D3008.pdf (unknown)The document is an Eskom drawing (number D-DT-3008) for line hardware items. It is explicitly not for manufacturing purposes, indicating it is for reference only.
Description
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdfThe document is the SDL&I (Supplier Development and Localisation & Industrialisation) Undertaking for the supply and delivery of various line hardware items on an 'as and when required' basis for the North West Operating Unit. Contract duration is five years. The document sets out specific goals (B-BBEE points), objective criteria (designated sectors, CIDB skills development, NIPP, mandatory subcontracting), and SDL&I objectives (transformation, local procurement, procurement from designated groups, jobs, skills development). It also covers penalties, performance security, reporting and monitoring, and validity of sworn affidavits.
Important Dates
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Closing date: 13 November 2026 at 10:00 (from tender record).
No briefing or site visit dates are stated in the document.
Contact Information
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)No contact information is provided in the document.
Submission Guidelines
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Returnable documents (all must be completed, signed and submitted):
Disqualification risks:
Evaluation Criteria
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Evaluation is based on the 90/10 or 80/20 preference point system under the PPPFA.
B-BBEE status level points (specific goals):
Objective criteria (Section 2) are not mandatory but are a condition for contract award. If the tenderer does not meet them, the second-ranked tenderer may be recommended for award.
Minimum qualifying score: not stated.
Technical Specifications
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Scope: Supply and delivery of various line hardware items on an 'as and when required' basis for the North West Operating Unit.
Contract duration: Five (5) years.
Designated sectors: The document indicates the commodity is NOT a designated sector (marked 'No'), so local content thresholds and SBD 6.2 / Annex C are not applicable.
CIDB skills development: Not applicable (marked 'No').
National Industrial Participation Programme (NIPP): Not applicable (marked 'N/A') — only applies if imported content equals or exceeds USD 5 million.
Mandatory subcontracting: Not applicable (marked 'N/A') — only applies to contracts above R30 million.
Methodology
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdfSkills development approach:
Quality Management
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Reporting and monitoring of SDL&I obligations:
Financial Requirements
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Pricing: The tender response must be separated into components as per the Price Schedule included with the tender documents. Local procurement content is total spending minus the imported component.
SDL&I penalties and security:
No bid security, bonds, guarantees, or payment terms are stated.
Compliance Requirements
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)B-bbee:
B-BBEE improvement plan:
Local procurement content:
Procurement from designated groups (encouraged, not mandatory):
Subcontracting:
No CSD registration, tax clearance, CIDB grading, or CIPC registration requirements are stated in this document.
B-BBEE Requirements
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Specific goals (B-BBEE points):
B-BBEE improvement plan:
Sworn affidavit validity:
Contractual Terms
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdfContract duration: Five (5) years.
SDL&I obligations become contractual obligations once the contract is signed.
B-BBEE improvement or retention plan must be submitted within 30 days of signing the contract.
Local procurement content target: 100%.
Procurement from designated groups (encouraged): Black owned 4.0%, Black women owned 3.0%, Black youth owned 2.0%, Black persons with disability 1.0%.
Skills development: Tenderers must propose skill types and number of candidates to develop skills of unemployed candidates from North-West province, representative of SA demographics. Tenderers bear full cost; Eskom makes no financial contribution.
SDL&I penalties and security:
Reporting and monitoring:
Special Conditions
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)SDL&I objectives (Section 3):
SDL&I penalties and security:
Reporting and monitoring:
Requirements
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdf (TENDER)Objective criteria (Section 2):
Section
Source: SDL & I UNDERTAKING For Supply and Delivery of Line Hardware.pdfEvaluation uses the 90/10 or 80/20 preference point system. Price points maximum 90 or 80; specific goals (B-BBEE) maximum 10 or 20. Total rounded to two decimals. Contract awarded to highest scoring tenderer. Objective criteria are a condition for award; failure may lead to second-ranked tenderer being recommended.
Technical Specifications
Source: Copy of Line Hardware SAP numbers.xlsx (unknown)Supply and delivery of various line hardware items on an as-and-when-required basis for a period of five years. The items are listed by SAP number and description, including glands, connectors, lugs, joints, armour rods, ties, grips, clamps, cable ties, earth wire, earth rods, brackets, bolts, nuts, rods, plates, anchors, and related hardware. Quantities are not specified in the available document.
Description
Source: Supplier Declaration of Interest Template.docxThe document is the Supplier Declaration of Interest template (form 240-59385360 Rev 3) used by Eskom. It requires the supplier to declare under oath that the information provided is true and correct, and to disclose any conflicts of interest involving Eskom employees or directors, including private work, close family or associate relationships, and business courtesies exchanged in the last 12 months. For consultants, it also requires disclosure of other services rendered to Eskom-related entities.
Submission Guidelines
Source: Supplier Declaration of Interest Template.docx (unknown)Returnable documents:
Evaluation Criteria
Source: Supplier Declaration of Interest Template.docx (unknown)The Supplier Declaration of Interest must be submitted as a returnable. Bidders must disclose:
A false declaration may result in Eskom recovering any gains from the supplier or the individual.
Compliance Requirements
Source: Supplier Declaration of Interest Template.docx (unknown)No specific compliance requirements beyond the Supplier Declaration of Interest are stated in the document.
Submission Guidelines
Source: Test Schedule Clamps IPC.pdf (unknown)Returnable documents: the completed and signed Test Report Schedule (D-DT 3039) for the selected SAP number. The schedule must be signed by the supplier, legally binding them to compliance with the stated SANS standards.
Evaluation Criteria
Source: Test Schedule Clamps IPC.pdf (unknown)The bidder must sign the test report schedule, legally binding themselves to compliance with the stated SANS standards. No other eligibility criteria are specified in the provided document.
Technical Specifications
Source: Test Schedule Clamps IPC.pdf (unknown)Test Report Schedule D-DT 3039 for Insulation Piercing Connector. Required tests per SAP number:
Quality Management
Source: Test Schedule Clamps IPC.pdf (unknown)The supplier must provide test reports for the selected SAP number, covering the specified SANS 50483 series tests. The supplier's signature on the schedule legally binds them to compliance with these standards.
Technical Specifications
Source: Test Schedule D3008.pdf (unknown)Test report schedule for the suspension cradle clamp (SAP No. 0168534). The following tests are required, each with the referenced standard clause:
Quality Management
Source: Test Schedule D3008.pdf (unknown)The supplier must provide test reports for the specified suspension cradle clamp (SAP No. 0168534) covering the listed tests: general dimensions, material type, sample and visual inspection, damage and failure load, tensile (SANS 61284), heat cycle (SANS 61284), short-circuit, corrosion (SANS 61284), drift (DSP 34-1659), torque (DSP 34-1659), and magnetic particle (ASTM E709). Each test must reference the corresponding standard clause.
Description
Source: TECHNICAL EVALUATION.pdfThis document sets out the standard technical evaluation criteria for Eskom distribution systems hardware and fittings used on overhead lines. It covers the evaluation strategy, method, and criteria, including desktop evaluation, product sample evaluation, and factory assessment. Specific item requirements are in the Technical Schedules attached to each commercial enquiry.
Submission Guidelines
Source: TECHNICAL EVALUATION.pdf (unknown)Returnable documents (all must be in the technical section of the submission; inclusion elsewhere is not considered):
Disqualification risks:
Evaluation Criteria
Source: TECHNICAL EVALUATION.pdf (unknown)Progressive evaluation levels, each must be passed to proceed:
Final results: Non-compliant, Compliant with qualifications, or Fully compliant.
DTI designation requirements must be met before technical evaluation proceeds.
Technical Specifications
Source: TECHNICAL EVALUATION.pdf (unknown)Scope: Supply and delivery of various line hardware items for overhead lines within Eskom Distribution, on an as-and-when-required basis for 5 years.
Specific technical requirements per item are in the Technical Schedules attached to the enquiry, not in this evaluation document.
Compliance standards: Eskom standards, South African National Standards, or international standards where no SA standard exists.
Products are high-risk items; non-compliance can cause serious harm, injury or death, and affect network performance and continuity of supply.
Bidders who are not the OEM must source required technical returnables from the OEM. If production is outsourced, the tenderer retains full accountability.
Methodology
Source: TECHNICAL EVALUATION.pdfEvaluation is conducted per SAP number.
Level 1 and Level 2 are evaluated independently by at least two evaluators; disparities resolved by consensus.
Level 3 sample evaluation is also independently evaluated by at least two evaluators.
Level 4 Factory Assessment is conducted as a team with a single result.
If Level 2 score is below 100% but meets threshold, deviations are noted and not penalised again at Level 3.
Sample evaluation may be done at the manufacturing plant for unduly large samples; smaller samples must be delivered to the designated Eskom commercial office within 14 calendar days of request.
Experience & Qualifications
Source: TECHNICAL EVALUATION.pdfManufacturers with 5+ years of prior Eskom supply may be exempt from Factory Assessment at the team's discretion; new manufacturers are always assessed.
Factory Assessment reviews the manufacturer's structure, organisation, quality process and experience to confirm capability to produce quality products and operate efficiently.
Quality Management
Source: TECHNICAL EVALUATION.pdfISO 9001 is a normative reference.
Level 4 Factory Assessment verifies:
If deficiencies are found, the manufacturer must undertake corrective action and demonstrate it to Eskom before the product is acceptable for procurement.
Compliance Requirements
Source: TECHNICAL EVALUATION.pdf (unknown)DTI designation: Eskom distribution hardware items are allocated a DTI designation; technical evaluation proceeds only when designation requirements are met.
Quality management: ISO 9001 referenced as a normative standard.
Section
Source: TECHNICAL EVALUATION.pdfProgressive evaluation levels: Level 1 Gatekeeper (100% pass/fail), Level 2 Scoring (90% threshold, negative marking, may be reduced to 85%), Level 3 Sample (100% threshold), Level 4 Factory Assessment (80% threshold). Final result is Non-compliant, Compliant with qualifications, or Fully compliant.
Description
Source: Test Report Schedule D-DT 3065.pdfSupply and delivery of various line hardware items to Eskom on an "as and when required" basis for a period of five years. The Test Report Schedule (D-DT 3065) sets out the items to be tested, each referenced to test specification Type 240-75883388.
Submission Guidelines
Source: Test Report Schedule D-DT 3065.pdf (unknown)Returnable document
Technical Specifications
Source: Test Report Schedule D-DT 3065.pdf (unknown)Scope
Test report schedule (D-DT 3065)
Quality Management
Source: Test Report Schedule D-DT 3065.pdf (unknown)Test evidence required per item, all referenced to specification Type 240-75883388:
The test report number for each item must be recorded on the Test Report Schedule (D-DT 3065).
Technical Specifications
Source: 3102.pdf (unknown)Scope
Item range — SAP number, conductor size, fixing hole, dimensions (D1, D2, A, B, C, W in mm)
Material and finish
Quality Management
Source: 3102.pdfInspection and release
Identification
Compliance Requirements
Source: 3102.pdf (unknown)Product compliance
Section
Source: 3102.pdf (unknown)Marking
Submission Guidelines
Source: Test Report Schedule 3089pdf.pdf (unknown)Returnable documents: Test Report Schedule DDT-3089 must be completed with the SAP number and supplier signature. The schedule must be submitted with the bid.
Evaluation Criteria
Source: Test Report Schedule 3089pdf.pdf (unknown)No evaluation criteria specified in the document.
Technical Specifications
Source: Test Report Schedule 3089pdf.pdf (unknown)Test reports are required for DDT-3089 - MISPAN FULL TENSION JOINT SET, for the selected SAP number. The following tests must be performed per SANS 50483:
Quality Management
Source: Test Report Schedule 3089pdf.pdf (unknown)Test reports must be provided for DDT-3089 - MISPAN FULL TENSION JOINT SET, per SAP number. The tests must be conducted in accordance with SANS 50483 and include: tensile load for phase & neutral, dielectrical voltage, water tightening, low temperature assembly, corrosion ageing, climatic ageing, electrical ageing, and endurance.
Description
Source: E-tendering Help Manual for supplier - 27 January 2025 (1).docxThe eTendering system replaces physical submission of tender documents at Eskom offices. Suppliers upload bid documents electronically via the web portal. Registration on the system is required before access is granted.
Submission Guidelines
Source: E-tendering Help Manual for supplier - 27 January 2025 (1).docx (unknown)Submission method: Register on the Eskom eTendering system and upload documents electronically.
Evaluation Criteria
Source: E-tendering Help Manual for supplier - 27 January 2025 (1).docx (unknown)No evaluation criteria are stated in the provided document. The document is a user manual for the eTendering system, not the tender specification.
Technical Specifications
Source: E-tendering Help Manual for supplier - 27 January 2025 (1).docx (unknown)The tender is for the supply and delivery of various line hardware items, on an 'as and when required' basis, for a period of five years.
The document provided is an Eskom eTendering system user manual, not the technical specification. No quantities, locations, or standards are stated.
Compliance Requirements
Source: E-tendering Help Manual for supplier - 27 January 2025 (1).docx (unknown)Bidders must have a Central Supplier Database (CSD) number to access the eTendering system.
Description
Source: STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdfThis specification applies to steel grades and welding requirements for overhead powerline structures and hardware components manufactured for Eskom Distribution. It covers LV, MV and HV distribution electrical networks. It replaces the previous standard DSP-34-2051.
Submission Guidelines
Source: STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdf (unknown)Returnable documents: all required SBD forms must be completed, signed and submitted with the bid, including SBD 1 (Invitation to Bid), SBD 4 (Declaration of Interest), SBD 6.1 (Preference Points Claim), SBD 8 (Declaration of Bidder's Past Supply Chain Management Practices) and SBD 9 (Certificate of Independent Bid Determination).
Disqualification risks:
Evaluation Criteria
Source: STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdf (unknown)Bidders must be registered on the CSD (Central Supplier Database) and have a valid tax clearance (SARS TCS).
Bidders must comply with the technical standard 240-75883830, including material and welding requirements.
Suppliers must be able to provide material grade certificates / mill test certificates.
Testing facilities must be SANAS-approved.
South African steel grades (300W, 350WA) are not permitted.
Bidders must complete all required SBD forms as per the tender pack (e.g., SBD 1, SBD 4, SBD 6.1, SBD 8, SBD 9).
Technical Specifications
Source: STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdf (unknown)Scope: Supply and delivery of various line hardware items for Eskom Distribution, on an "as and when required" basis for a period of five years.
Material specification:
Sections and dimensions (Table 1):
Material properties:
Limit state design:
Welding requirements:
Compliance with requirements:
Heat treatments:
Galvanizing:
Repairing damaged galvanizing coat areas:
Test facility:
Quality Management
Source: STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdfMaterial specification: Steel used in fabrication of structural steelwork shall comply with SANS 50025-2. Imported steel shall undergo landing tests including mechanical (tensile, impact, bending) and chemical composition testing. All material grades shall be supplied with a material grade certificate/mill test certificate. Chemical composition shall comply with SANS 50025-2. Tensile properties, impact resistance (Charpy V-notch, minimum 27 J at 20°C), bending properties, and hardness values (per Table 2) are specified. Hardness values are used as a non-destructive method to verify heat treatment control.
Welding requirements: Welding procedures shall comply with SANS 15614-1. Electrodes shall comply with SANS 50025-2. Minimum fillet weld sizes per AWS D1.1 (Table 3). General inspection: at least 2 sample products per batch checked for dimensional accuracy. Welders shall be qualified per AWS D1.1/D1.1M. Examination and testing of welds per Table 4, including non-destructive testing (visual, magnetic particle, dye penetrant, ultrasonic, radiographic) and destructive testing (transverse tensile, bend, macroscopic, impact, hardness). Records of test results shall be kept. Tests must be performed by accredited institutions.
Heat treatments: Unless otherwise requested by Eskom, supplier/manufacturer shall heat treat materials not complying with test requirements or that underwent extensive welding. Maximum two heat treatment cycles. Precautions to avoid decarburization.
Galvanizing: All welding procedures shall be performed prior to hot dip galvanizing, sherardizing or thermal spraying. Welding residues must be removed before coating. Low silicone, water-soluble anti-spatter sprays recommended. Surface preparation per standard. In high corrosive environments, a high quality epoxy such as polyurethane shall be used to top up galvanising coat. All galvanising procedures and tests shall be conducted by a SANAS approved laboratory in accordance with SANS 121. Certificates shall indicate at least five coating thicknesses and the average value.
Repairing damaged galvanizing coat areas: Total uncoated areas for renovation shall not exceed 0.5% of total surface area; each uncoated area shall not exceed 10 cm². Larger areas require re-galvanizing unless agreed by Eskom. Repairs by zinc-containing paint, zinc paste, or thermal zinc spraying. Repair coating shall provide sacrificial protection, minimum average thickness 105 μm unless otherwise agreed.
Test facility: Supplier/manufacturer shall ensure tests conducted outside Eskom are SANAS approved. Eskom shall not accept test certificates from unapproved testing facilities.
Compliance Requirements
Source: STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdf (unknown)CSD registration: Bidders must be registered on the Central Supplier Database (CSD).
Tax clearance: Bidders must have a valid tax clearance (SARS TCS).
Technical compliance: Bidders must comply with the technical standard 240-75883830, including material and welding requirements.
Material certificates: Suppliers must be able to provide material grade certificates / mill test certificates.
Testing facilities: Must be SANAS-approved.
Steel grades: South African steel grades (300W, 350WA) are not permitted.
SBD forms: Bidders must complete all required SBD forms as per the tender pack (e.g., SBD 1, SBD 4, SBD 6.1, SBD 8, SBD 9).
Health & Safety
Source: STEEL GRADES AND WELDING REQUIREMENTS FOR STEELWORK.pdfNo specific health and safety requirements are stated in the document.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
Various Places in the Northwest OU - - Various Places in the Northwest OU -
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
168
Last checked
09 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Key Personnel
Provinces Active
Industries
Get deep intelligence on Supplies: General. Unlock full pricing strategies, bid frequency, and historical win rates.
Learn how to submit a winning bid with these related articles
Everything South African general contractors need to know about how to write a winning tender proposal without an in-house bid team in gauteng — covering CSD, BBBEE, step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
Your meticulously crafted General sector tender submission can be disqualified for a single, seemingly minor compliance oversight. The reality for South African contractors is that technical competence is no longer sufficient; it is underpinned by a non-negotiable framework of documentary compliance. This regulatory guide: mastering CSD and BBBEE compliance for general sector tenders in south africa provides a comprehensive, step-by-step breakdown of the mandatory registrations and certificates you must secure and present. We detail the precise requirements for CSD, BBBEE, SARS TCS, CIPC, and COIDA, explaining their function within the procurement ecosystem governed by the PFMA and PPPFA. Learn the actionable steps to prepare your business, avoid the most common disqualifying errors, and leverage technology to streamline your compliance process for successful bidding in 2026 and beyond.
For South African General contractors, the path to government procurement is paved with non-negotiable regulatory requirements. The most common barrier to entry is not a lack of capability, but a failure to master the foundational compliance frameworks that govern every bid. This complete regulatory guide to CSD and BBBEE compliance for General sector tender suppliers in South Africa demystifies the process. It provides a meticulous, step-by-step field manual for ensuring your company is fully compliant and audit-ready, enabling you to confidently access the R billions in opportunities across infrastructure maintenance, facilities management, and service delivery within the General sector.
This definitive guide provides General sector contractors with the precise, actionable steps required to achieve and maintain CSD and BBBEE compliance for South African public tenders in 2026. Authored by Dr. Sarah Mokwena, a Legal Compliance Specialist, it meticulously walks through the regulatory framework, mandatory registrations, and the critical documentation needed to avoid disqualification. We dissect the common, costly errors made during submission and provide a clear checklist to ensure your bid is responsive and competitive. Learn how to navigate the Central Supplier Database, validate your BBBEE status, and integrate compliance into your tender preparation process.
💡 Want more tendering tips and strategies?
Explore Our Blog