ESKOM requires the supply and delivery of piping to lethabo power station for stock replenishment over a five-year period, called off as and when required. Bidders must hold a valid csd number, submit a valid iso 9001 certificate at closing, and price in south african rand with all duties and VAT included. The most consequential consideration is that the tender closes on 11 december 2026 at 10:00 and must be finalised on the ESKOM etendering portal before that time; late or incomplete uploads are rejected.
Key Requirements
Closing: 11 December 2026 at 10:00 SAST; electronic submission only via the Eskom eTendering portal, finalised before the closing time, with no hard-copy or tender-box submissions accepted.
Clarification meeting: non-compulsory online session on 26 November 2026 at 09:00 via Microsoft Teams; attendance is not a condition of bidding.
Mandatory returnables: Schedule A and B completed by hand for each item tendered, a valid ISO 9001 certificate at closing, the Integrity Declaration (Annexure A), the Authorisation Form with certified resolution or power of attorney, and a certified JV agreement where applicable; any omission disqualifies.
Financial capacity: audited financial statements for the previous 18 months (or the last year if unavailable) must be submitted, with each JV or SPV participant providing its own; start-ups formed within the last 12 months are exempt but must furnish first-year statements if awarded.
B-BBEE and tax: a valid B-BBEE certificate or sworn affidavit and a valid tax compliance status PIN or SARS tax clearance are required; missing B-BBEE evidence scores zero preference points but does not disqualify.
Pricing and CPA: prices in Rand including all duties, taxes and VAT; for the five-year term, a CPA formula may apply from year two, must total 100% with at least 15% fixed, must use only published indices, and must separate local and foreign components; no CPA submitted means prices are fixed and firm.
Disqualifiers: 100% sub-contracting of the scope, late or unfinalised uploads, and failure to submit any mandatory returnable by the closing date and time.
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
DocumentQuality.zipReview complete
Description
Source: Quality.zip
Important Dates
18 Nov
2026
PUBLICATION
Tender Published
Tender was published
11 Dec
2026
DEADLINE
Closing Date
Tender closing date
Procurement Rules & Compliance ContextThis tender may be governed by South African public procurement rules covering fairness, transparency, preferential procurement, anti-corruption, administrative justice and access to information.
7 rules
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
Core procurement rules
These rules commonly apply to South African public-sector procurement.
7
Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
high
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Constitution of the Republic of South Africa, 1996 – Section 217
Act 108 of 1996 (s217)
high
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Supply and delivery of piping for stock replenishment over a 5-year period on an as-and-when-required basis, for Eskom in the Free State. Bidders must demonstrate a documented quality management system aligned to ISO 9001 and submit a draft contract quality plan and quality control plan.
Supply and delivery of piping to Lethabo Power Station for stock replenishment on an as and when required basis over a five-year period, under the NEC3 Supply Contract (SC3). The contract is awarded by Eskom Holdings SOC Ltd and delivery is to Lethabo Power Station in the Free State.
Supply and delivery of piping for stock replenishment over a five-year period on an as-and-when-required basis for Eskom in the Free State. Suppliers must operate a quality management system conforming to ISO 9001 and meet Eskom's Supplier Quality Management requirements, including contract quality plans and quality control/inspection and test plans.
Supply and delivery of piping for stock replenishment over a five-year period on an as-and-when-required basis, for Eskom in the Free State. The contract exceeds twelve months, so contract price adjustment (CPA) applies from year two onwards, with a minimum 15% fixed portion.
Win Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Similar Tenders
Matched by category & region
Supplier Readiness Hub
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open, inspect, issue inspection report, refurbish or replace non-return, Globe, Ball, AMOT, Butterfly, Wedge, Gate, Parallel Slide and Diaphragm valves of the boiler and turbine auxiliary systems at Kriel Power Station for a period of five
years
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
Supply and delivery of piping for stock replenishment over a 5-year period on an as and when required basis.
Quality requirements are Category 3 (pre-contract award).
Post-contract award, Eskom will monitor supplier quality performance, exercise rights of access and information, apply preservation requirements, conduct quality audits, manage nonconformities, and oversee special processes.
Contact Information
Source: Quality.zip (TENDER)
Eskom quality representative:
Name: Mmaphuti Moloto
Role: QA Officer
Date issued: 12 November 2026
Submission Guidelines
Source: Quality.zip (TENDER)
Returnable quality documents (Category 3):
Section A: QMS Manual or quality method statement, Quality Policy, Quality Objectives, document and record control, control of nonconforming outputs, nonconformity and corrective action, internal audit records.
Section B: Organisation chart and responsibility matrix including the quality management function, external provider control criteria, proof of material and equipment compliance with Eskom and national/international standards, preservation of goods procedures, project risk register and action plan (not an OHS risk assessment).
Section C: Draft Contract Quality Plan specific to the scope (ISO 10005).
Section D: Draft or example Inspection and Test Plan (ITP) or Quality Control Plan (QCP) from similar or previous work (ISO 10005).
Section E: Form A (Tender & Contract Quality Requirements, Document 240-68099512 Rev 9) completed and signed by the tenderer's quality representative.
Form A must indicate Category 3 only and mark the applicable clauses and ISO 9001 principles.
Evaluation Criteria
Source: Quality.zip (TENDER)
Quality evaluation is scored per section:
Section A (QMS requirements): 7 points
Section B (evidence of QMS in operation): 5 points
Section C (draft Contract Quality Plan): 1 point
Section D (draft ITP/QCP): 1 point
Section E (Form A completed and signed): 1 point
Total quality score: 15 points.
Bidders must select Category 3 only for pre-contract award quality requirements; selecting more than one category is not permitted.
Technical Specifications
Source: Quality.zip (TENDER)
Scope: supply and delivery of piping for stock replenishment over a 5-year period on an as and when required basis.
Quality requirements apply under Category 3 (pre-contract award).
Post-contract award, Eskom will monitor supplier quality performance, exercise rights of access and information, apply preservation requirements, conduct quality audits, manage nonconformities, and oversee special processes.
Compliance Requirements
Source: Quality.zip (TENDER)
Quality management system:
A documented QMS complying with ISO 9001 is required even if not certified.
Evidence must cover all clauses listed in Sections A and B.
Returnable forms:
Form A (Tender & Contract Quality Requirements, Document 240-68099512 Rev 9): completed and signed by the tenderer's quality representative, selecting Category 3 only.
Section
Source: Quality.zip
Quality evaluation is scored per section:
Section A (QMS requirements): 7 points
Section B (evidence of QMS in operation): 5 points
Section C (draft Contract Quality Plan): 1 point
Section D (draft ITP/QCP): 1 point
Section E (Form A completed and signed): 1 point
Total quality score: 15 points.
Bidders must select Category 3 only for pre-contract award quality requirements; selecting more than one category is not permitted.
DocumentSafety.zipReview complete
Description
Source: Safety.zip
Eskom requires suppliers and sub-suppliers to operate a quality management system that meets ISO 9001 and Eskom's supplier quality specification 240-105658000 (QM 58). The specification sets the minimum quality criteria for supplier selection, evaluation, vendor registration, monitoring, assessment and auditing, and applies to all Eskom divisions, subsidiaries, suppliers and sub-suppliers. It forms part of every Eskom RFI, RFQ and RFP for products and services. The aim is to ensure suppliers continually improve their QMS and service delivery.
Submission Guidelines
Source: Safety.zip (unknown)
Returnable documents
Form A (240-68099512): completed and signed to acknowledge Eskom's supplier quality requirements and ISO 9001 obligations.
Quality documentation for the category Eskom selects (Category 1, 2, 3 or 4), as listed in 240-12248652 List of Tender Returnables.
ISO 9001 certificate from an accredited certification body, unless the category excludes it.
Internal and external QMS audit reports, including nonconformities and corrective actions.
Draft contract quality plan aligned to ISO 10005 and specific to the scope of work.
Example inspection and test plan (ITP) or quality control plan (QCP) from similar or previous work, where applicable.
Documented information for control of externally provided processes, products and services.
Documented roles, responsibilities and authorities (organograms, job descriptions, procedures).
Records of management review meetings (agenda, minutes, attendance registers).
Category 4 alternative: quality method statement based on ISO 9001, signed quality policy and quality objectives.
Submission method and address
Not stated in the available specification text; confirm the submission channel and address in the main bid document.
Disqualification risks
Omitting or leaving unsigned Form A.
Failing to submit the quality returnables required for the category Eskom selects.
No valid ISO 9001 certificate where the category requires one.
Evaluation Criteria
Source: Safety.zip (unknown)
Evaluation stages
Quality requirements: Eskom selects one category (1, 2, 3 or 4) per procurement using Form A and the List of Tender Returnables (240-12248652).
Returnable quality documentation: assessed against the selected category's minimum returnables.
Capability and capacity assessment: may be performed before contract award for suppliers providing high-risk products or services, working on critical plant and equipment, supplying critical plant items or components, or providing special processes.
Scoring
Preference point system, minimum qualifying score and price/functionality split: not stated in the available specification text.
Technical Specifications
Source: Safety.zip (unknown)
Scope
Supply and delivery of piping for stock replenishment over a five-year period, on an as-and-when-required basis.
The quality requirements apply to all products, services and processes delivered under the contract.
Quality management system
The supplier and any sub-suppliers must develop, implement, maintain and continually improve a formal QMS conforming to the latest ISO 9001 revision.
The QMS must be documented, with a quality manual, quality plans, work procedures, work instructions and method statements as applicable.
A valid ISO 9001 certificate from an accredited certification body is required unless the selected category excludes it.
The main supplier must inform Eskom before implementing any change to the QMS or quality staff that affects the quality system.
The main supplier must operate a performance management programme for sub-suppliers covering QMS verification, audits, surveillance, CQP and QCP review, nonconformity and defect management, inspection and test plans, and risk management.
Contract Quality Plan (CQP)
A documented CQP is required where specified in the evaluation criteria or the List of Tender Returnables.
The CQP must follow ISO 10005 and cover records management, material tests, positive material identification, material certification, inspection access, final documentation and data book submission before shipment.
Welding controls: welder qualification records, welding procedure specifications and procedure qualification records must be reviewed and accepted before manufacture; welders must be qualified to the applicable construction codes.
Special processes (non-destructive examination, welding, coating, heat treatment) must be performed by suitably qualified personnel, registered with statutory bodies where required.
Personnel training needs must be identified, documented and implemented; training certificates must meet SETA unit-standard and accreditation requirements.
Storage, preservation and maintenance instructions for equipment and materials must be provided before delivery.
The CQP must be submitted before the kick-off or pre-fabrication meeting and before manufacture starts, whichever is earlier.
Quality Control Plan / Inspection and Test Plan (QCP/ITP)
A QCP/ITP must control all manufacturing, fabrication, assembly and installation stages, identifying verification activities and critical controls.
Eskom or its inspection agency must review and accept the QCP/ITP, including hold and witness points, before work starts.
Changes to an accepted QCP/ITP require Eskom's agreement before the affected activity begins.
Each sub-supplier scope of work requires a separate QCP/ITP; the main supplier remains accountable for their development and implementation.
The QCP/ITP must record the Eskom contract number and title, supplier order number, area of works, work description, unique QCP/ITP number, sequence of operations, reference specifications and drawings, acceptance criteria, intervention points, inspection and test records, and sign-off by all parties.
Applicable codes, standards and acceptance criteria must be available at the work location in English and any workforce-appropriate language.
Meetings and oversight
A quality kick-off meeting is held at contract start and at the start of each subsequent phase if required.
Coordination meetings must be arranged with Eskom before orders are placed, with 14 days' advance notice.
Mandatory pre-inspection meetings may be convened by Eskom or its inspection agency.
Eskom may appoint resident quality inspectors at supplier or sub-supplier premises and on site; the supplier must provide workspace at no cost.
Eskom may appoint an approved inspection authority or inspection agency, and the supplier may not hinder their work.
Compliance Requirements
Source: Safety.zip (unknown)
Quality management system
Formal QMS conforming to the latest ISO 9001 revision, covering the supplier and all sub-suppliers.
Valid ISO 9001 certificate from an accredited certification body, unless the selected category excludes it.
Category returnables (Eskom selects one category per procurement)
Category 1: Form A; ISO 9001 certificate; latest internal and external audit reports with nonconformities and corrective actions; draft contract quality plan per ISO 10005; example ITP/QCP; documented control of externally provided processes; roles and responsibilities documentation; management review records.
Category 2: Form A; objective evidence of an implemented ISO 9001 QMS (QMS manual, quality policy, quality objectives, document control, internal audit procedure, control of nonconforming outputs, corrective action procedure); latest internal audit reports; draft contract quality plan; example ITP/QCP; control of externally provided processes; roles and responsibilities documentation; management review records.
Category 3: Form A; objective evidence of a developed ISO 9001 QMS (QMS manual, quality policy, quality objectives, document control, internal audit procedure, control of nonconforming outputs, corrective action procedure); draft contract quality plan; example ITP/QCP; control of externally provided processes; roles and responsibilities documentation.
Category 4: Form A; quality method statement based on ISO 9001 and specific to the scope; signed quality policy; quality objectives; control of externally provided processes; roles and responsibilities documentation specific to the project.
Capability and capacity assessment
May be conducted before contract award for suppliers providing high-risk products or services, working on critical plant and equipment, supplying critical plant items or components, or providing special processes.
Section
Source: Safety.zip
Quality requirements are selected per procurement by an Eskom quality representative using Form A and the List of Tender Returnables (240-12248652). Bidders must submit the returnables for the category Eskom selects (Category 1, 2, 3 or 4). Capability and capacity assessments may be performed before contract award for high-risk or critical supplies and special processes. The specification does not state a preference point system, minimum qualifying score or price/functionality split.
DocumentTechnical.zipReview complete
Description
Source: Technical.zip
Supply and delivery of piping to Lethabo Power Station for stock replenishment over a five-year period, on an as-and-when-required basis.
Lethabo Power Station is a coal-fired station in the Free State with six 618 MW units (installed capacity 3 708 MW).
The contract is based on the NEC3 Supply Contract (SC3).
The technical evaluation strategy (unique identifier 375-172649) sets out the mandatory and qualitative criteria.
Schedules A and B list the piping items and are used to confirm the scope tendered.
Important Dates
Source: Technical.zip (unknown)
Closing date: 11 December 2026 at 08:00.
Delivery date: as stipulated on each purchase order.
First programme submission: within one week after the kick-off meeting.
Revised programmes: at intervals no longer than one week.
Defects date: 52 weeks after delivery of each purchase order.
Defect correction period: two weeks.
Defect access period: five working days after notification.
Payment assessment: five days after each delivery.
Payment period: four weeks after assessment and receipt of an undisputed tax invoice.
End of liability date: one year after delivery of the whole of the goods and services per purchase order.
B-BBEE change notification: within seven days of the change; updated verification certificate within 30 days.
Joint venture key person notification: within two weeks of the Contract Date.
Contact Information
Source: Technical.zip (unknown)
Purchaser
Name: Eskom Holdings SOC Ltd
Registration number: 2002/015527/30
Address: Megawatt Park, Maxwell Drive, Sandton, Johannesburg, 2199
Supply Manager
Address: Lethabo Power Station, Private Bag X 415, Vereeniging, 1930
Telephone: not stated
Email: not stated
Adjudicator nominating body
Chairman of ICE-SA, a Division of the South African Institution of Civil Engineering
Website: www.ice-sa.org.za
Arbitration body
Association of Arbitrators (Southern Africa)
Delivery place
Lethabo Power Station, Deneysville Vaaldam Road, Vereeniging, 1930
Submission Guidelines
Source: Technical.zip (unknown)
Returnable documents
Schedule A and B: complete Schedule B by hand for each piping item tendered.
ISO 9001 certificate: valid at the time of tender.
Form of Offer and Acceptance (C1.1): signed offer stating the total price exclusive of VAT, VAT at 15%, and the total inclusive of VAT.
Contract Data Part 2 (C1.2b): supplier details, tendered total of the Prices, programme, and percentage for overheads and profit.
Pricing Data (Part C2): completed pricing schedule.
Parent company guarantee (Option X4) and performance bond (Option X13): only if required following financial analysis.
Tax invoice: must quote Eskom's VAT number 4740101508.
Submission method and address: not stated in the available document text.
Evaluation Criteria
Source: Technical.zip (unknown)
Technical evaluation
Minimum weighted final technical score: 70%.
Evaluation by a Technical Evaluation Team (TET); at least two members from each section evaluate, and additional members may be included.
Mandatory technical criteria and qualitative criteria are set out in the Tender Technical Evaluation Strategy (unique identifier 375-172649).
Schedule A and B are used to confirm the scope of piping items tendered.
Preference points: not stated in the available document text.
Technical Specifications
Source: Technical.zip (unknown)
Scope
Supply and delivery of piping to Lethabo Power Station for stock replenishment over a five-year period, on an as-and-when-required basis.
Lethabo Power Station is a coal-fired station in the Free State with six 618 MW units (installed capacity 3 708 MW).
The contract is based on the NEC3 Supply Contract (SC3).
Deliverables
Piping items as listed in Schedules A and B.
Consignment stock: the supplier must hold minimum spares for items not kept at its warehouse and for items with long lead times; quantities to be agreed by both parties.
Packing lists for cases and their contents.
Copy of invoice for the goods.
Delivery note.
Test results and maintenance manuals.
Delivery and transport
Delivery place: Lethabo Power Station, Deneysville Vaaldam Road, Vereeniging, 1930.
Incoterms 2010 apply; the applicable term is to be selected in Annexure A.
The supplier gives notice of delivery, checks packing and marking before dispatch, contracts and pays for transport, arranges access to the delivery place, and loads the goods.
Eskom unloads the goods.
The supplier must not deliver more than one week before the delivery date.
Goods must be packaged and transported safely, well stacked and preserved.
The supplier must undertake import requirements where applicable.
Standards and references
Eskom Standard for Low Pressure Pipelines (240-123801640).
Eskom Strategic and Critical Spares Policy (240-70240749).
Eskom Procurement and Supply Chain Management Policy (32-1033) and Procedure (32-1034).
Procedure for the Identification and Planning of Plant Asset Obsolescence (240-48197042).
Risk register matters
Access to site due to road closure.
Material preservation.
Financial Requirements
Source: Technical.zip (unknown)
Pricing
Prices are fixed and firm for the first year; contract price adjustment applies in subsequent years.
Price adjustment weights: 15% transport (SEIFSA Table L-1), 70% material (SEIFSA Table D-3), 15% fixed.
Base date for indices: one month before the tender closing date.
Currency: South African Rand.
VAT at 15% applies; Eskom's VAT number 4740101508 must appear on invoices.
Payment
Assessment interval: five days after each delivery.
Payment period: four weeks after assessment and receipt of an undisputed tax invoice.
Interest on late payment: publicly quoted prime rate of Standard Bank of South Africa, calculated on a 365-day year.
Tax invoice must be submitted within one week of receiving a payment certificate; late submission extends the payment date by the same period.
Securities
Parent company guarantee (Option X4): applies only if recommended by financial analysis.
Performance bond (Option X13): applies only if recommended by financial analysis.
Insurance: as set out in Insurance Table A (supplier) and Insurance Table B (purchaser).
Delay damages
1.25% of the line-item value per day until delivery, capped at 10% of the line-item value of the purchase order.
Low performance damages
1.5% per day for delivery of wrong specification (material).
2.5% per day for not meeting quality standards, including documents.
1.5% per day for not keeping minimum consignment stock.
Total low performance damages limited to 5% of each line item per purchase order.
Liability
Supplier's liability for indirect or consequential loss: R0.00.
Supplier's total liability: total of the Prices.
Purchaser's liability for indirect or consequential loss: R0.00.
Compliance Requirements
Source: Technical.zip (unknown)
B-bbee
The supplier must notify Eskom within seven days of any change to its B-BBEE status.
An updated verification certificate and supporting documentation must be submitted within 30 days of notification.
A decrease in B-BBEE status may lead to renegotiation or termination.
Failure to notify may constitute grounds for termination.
Joint ventures
Members of a joint venture, consortium or unincorporated grouping are jointly and severally liable.
The key person authorised to bind the supplier must be notified within two weeks of the Contract Date.
Changes to the composition require Eskom's written consent.
Cession and assignment
No cession, delegation or assignment without Eskom's written consent.
Ethics
Prohibited actions (coercive, collusive, corrupt, fraudulent, obstructive) are not permitted during procurement or execution.
Eskom may terminate for prohibited action without a court finding.
Confidentiality
Information arising from the contract must not be disclosed; images of the goods require prior written consent.
Health, safety and environment
The supplier must comply with all applicable health, safety and environmental laws and ensure subcontractors do the same.
The contract price is deemed to include the cost of health and safety compliance.
Asbestos
Work must comply with Eskom's Asbestos Standard 32-303 and the Asbestos Regulations.
Occupational exposure limit: 0.2 regulated asbestos fibres per millilitre of air as a 4-hour TWA; short-term limit 0.6 fibres per millilitre over 10 minutes.
Asbestos removal and disposal by a registered asbestos contractor at Eskom's expense.
Nuclear liability
Eskom indemnifies the supplier against nuclear damage, subject to exceptions for unlawful intent or unauthorised presence at Koeberg.
Returnable forms
Schedule A and B: scope confirmation.
ISO 9001 certificate: quality management system evidence.
Form of Offer and Acceptance (C1.1): binding offer.
Contract Data Part 2 (C1.2b): supplier data and pricing.
Pricing Data (Part C2): pricing schedule.
DocumentCommercial.zipReview complete
Description
Source: Commercial.zip
Supply and delivery of piping for stock replenishment over a five-year period, on an as-and-when-required basis, for Eskom.
The scope covers piping items listed in the pricing schedules; bidders must complete Schedule A and B by hand for each item tendered.
The contract price adjustment (CPA) mechanism applies as set out in Annexure E: a minimum 15% fixed portion, separate local and foreign formulae, official published indices only, and a base date of the month before the tender closes.
The Eskom eTendering system is the only submission channel; suppliers must register with a CSD number and upload documents under the correct categories (Technical, Commercial, Financial).
Important Dates
Source: Commercial.zip (TENDER)
Closing date: 11 December 2026
Closing time: 08:00 (SAST)
Briefing session: 26 November 2026 at 09:00
Briefing venue: online clarification meeting via Microsoft Teams
Briefing attendance: compulsory; failure to attend disqualifies the bidder.
Contact Information
Source: Commercial.zip (TENDER)
Enquiries:
Channel: written communication to the Eskom Representative only
Submission method: electronic only via the Eskom eTendering portal (https://eTendering.eskom.co.za), accessed through the Eskom Tender Bulletin.
CSD registration: a valid CSD number is required to access the eTendering system.
Upload limits: each file may not exceed 50MB; total upload may not exceed 900MB.
Finalisation: the submission must be finalised on the portal before the closing date and time; the system locks after closing.
Hard-copy submission: not accepted for e-tendering; tenders deposited in the Eskom tender box will not be considered.
Language: English.
Returnable documents (mandatory):
Schedule A and B: completed by hand for each item tendered, confirming understanding of the scope.
ISO 9001 certificate: valid at the closing date.
Annexure A (Integrity Declaration Form): declares any interest or relationship with Eskom or state employees and confirms fair tendering practices.
Authorisation Form: completed for the bidder's organisation type (company, close corporation, partnership, joint venture, sole proprietor or trust), with a certified copy of the authorising resolution or power of attorney attached.
Joint Venture Agreement (if applicable): certified copy confirming joint and several liability, the lead member and work/payment ratios.
B-BBEE certificate or sworn affidavit: required to claim preference points.
Audited financial statements: for the previous 18 months, or the last year if 18 months are unavailable; each JV or SPV participant must submit its own statements; start-ups formed within the last 12 months are exempt but must furnish first-year statements if awarded.
Tax compliance status: valid tax compliance status PIN or SARS tax clearance.
Safety file: to be evaluated and approved after award, before work commences.
Disqualification risks:
Late submission or failure to finalise the upload before the closing time.
Omission of any mandatory returnable document.
Submission by any channel other than the eTendering portal.
100% sub-contracting of the scope of work.
Evaluation Criteria
Source: Commercial.zip (TENDER)
Evaluation stages:
Mandatory compliance check: CSD registration, tax compliance, mandatory returnables, ISO 9001 certificate, Schedule A and B, Integrity Declaration, Authorisation Form.
Functionality/technical evaluation: scored against the technical criteria in the tender; bidders must meet the minimum threshold to proceed.
Price and preference points evaluation: 80/20 or 90/10 preference point system as specified in the tender data.
A bidder that fails to submit evidence of its specific-goal claim is not disqualified but scores 0 for that goal.
The contract is awarded to the bidder scoring the highest total points.
Minimum qualifying score: not stated in the available text.
Technical Specifications
Source: Commercial.zip (TENDER)
Scope: supply and delivery of piping for stock replenishment over a five-year period, on an as-and-when-required basis.
Items: each item tendered must be listed and confirmed on Schedule A and B, completed by hand.
Quality system: an ISO 9001 quality management system must be in place, evidenced by a certificate valid at the closing date.
Contract price adjustment (CPA):
Contracts longer than 12 months may apply CPA from year two onwards; the first year is fixed.
A minimum of 15% of the total agreement value must be fixed when a CPA formula is applied.
Each CPA formula must total 100%.
Separate formulae are required for local and foreign components; they may not be combined.
Only official published indices in the public domain may be used; no in-house indices.
Rate of exchange adjustment is not accepted in any CPA formula.
Local indices may not be used for imported components.
Base date: the month before the month in which the tender closes; for daily or more frequent indices, the average of that month.
Failure to submit a CPA formula means pricing is treated as fixed and firm.
Professional services, if applicable, use the country-specific CPI headline index, adjusted on each contract anniversary using the average of the preceding 12 months.
Safety, health, environment and quality (SHEQ):
A SHEQ system, policies and capabilities must be in place at the closing date and/or contract award.
All SHEQ costs and personnel must be reflected in the tender.
A contractor safety file must be submitted and approved after award before work starts; safety plans must be signed by responsible managers and safety practitioners.
Employees must be trained and competent for the activities.
Environmental: no EIA required, but ISO 14001 environmental requirements and Lethabo environmental procedures apply.
Financial Requirements
Source: Commercial.zip (TENDER)
Pricing:
Prices must be in South African Rand and include all duties, taxes (including VAT) and levies applicable 14 days before the closing date.
Prices are fixed for the contract duration unless a CPA is provided and accepted.
Unconditional discounts are taken into account for evaluation but applied at payment.
Payment terms:
Contracts below R50 000 000 including VAT: payment within 30 days of receipt of undisputed invoices.
Contracts above R50 000 000 including VAT: payment terms as stipulated in the contract.
Performance security:
Where a performance bond or demand guarantee is required, the tenderer must select a minimum of two financial institutions.
Financial capacity:
Audited financial statements for the previous 18 months, or the last year if unavailable, must be submitted.
JV or SPV participants must each submit audited financial statements.
Start-ups formed within the last 12 months are exempt but must provide first-year statements if awarded.
Compliance Requirements
Source: Commercial.zip (TENDER)
CSD registration: a valid CSD number is required to access eTendering and to submit.
Tax compliance: a valid tax compliance status PIN or SARS tax clearance is required.
B-bbee:
A valid B-BBEE certificate issued by a SANAS-accredited verification agency, a sworn affidavit, or a CIPC affidavit is required to claim preference points.
Minimum B-BBEE level: 0 (no minimum level stated; points are scored per the table).
Failure to submit B-BBEE evidence results in 0 preference points but does not disqualify.
ISO 9001: a certificate valid at the closing date must be submitted.
SHEQ: proof of SHEQ systems, policies and capabilities must be in place at the closing date and/or contract award.
CIDB: not applicable unless stated in the tender data.
Local content: materials designated for local content and/or production by the dtic must comply.
Legislation: compliance with National Treasury instruction notes, PPPFA regulations, amended B-BBEE Codes, COIDA, OHS Act and Eskom SHEQ requirements.
Returnable forms:
Annexure A (Integrity Declaration Form): declares interests and confirms fair tendering practices.
Authorisation Form: confirms the signatory is authorised to bind the bidder.
Joint Venture Agreement: required for JVs, confirming joint and several liability.
Schedule A and B: confirms scope understanding per item.
SBD 6.1 Preference Points Claim Form: claims B-BBEE preference points under the PPPFA 2022 regulations.
Section
Source: Commercial.zip
Evaluation is in stages:
Mandatory compliance: CSD, tax compliance, ISO 9001 certificate, Schedule A and B, Integrity Declaration, Authorisation Form, B-BBEE evidence.
Functionality/technical: scored against the technical criteria; bidders must meet the minimum threshold to proceed.
Price and preference points: 80/20 or 90/10 system.
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.