Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Bid(Open-Tender)
Delivery Location
Corner Hunslet and Lower Germiston Road - ROSHERVILLE - Gauteng - 2022
Organization Type
GOVERNMENT
Published
12 Nov 2026
OCDS Reference
ocds-9t57fa-178016
Supply and delivery of tapchangers and associated parts to ESKOM rotek industries over a period of four (4) years, on an as-and-when-required basis rather than against guaranteed volumes. Bids are lodged electronically through the ESKOM etendering portal, and a valid csd number plus a verified portal registration are preconditions for uploading anything at all. Because call-offs are intermittent, bidders should price for as-required supply and be able to sustain availability across the full four years. The closing date is 3 december 2026 at 10:00.
Closing: 3 December 2026 at 10:00 — submissions cannot be lodged after this time.
Submission channel: electronic only through the Eskom eTendering portal at https://eTendering.eskom.co.za; tenders are advertised on https://tenderbulletin.eskom.co.za and physical delivery to Eskom tender offices is not used.
CSD registration: a valid Central Supplier Database number is mandatory to gain portal access and to submit a bid.
Portal registration: email address and cellphone number must be registered and verified, a one-time PIN is sent to both at every login, and telephone numbers must be captured with a country prefix such as +27.
Contract term: four (4) years on an as-and-when-required basis, so no minimum order quantity or guaranteed spend applies.
Upload limits: maximum 50MB per file and 900MB across all files, with each document filed under the correct category (technical, commercial or finance).
Submission ID: a confirmation email listing every submitted file and a submission ID is issued on finalisation — retain it for any later enquiry, and raise Tender Bulletin, eTendering or OpenText problems with the Eskom buyer responsible for the tender.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Categories
Request for Bid(Open-Tender)
Corner Hunslet and Lower Germiston Road - ROSHERVILLE - Gauteng - 2022
AI Document Analysis Stages
Description
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf12 Nov
2026
Tender Published
Tender was published
03 Dec
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
32-136 Contractor Health and Safety Requirements.pdf
Eskom requires the supply and delivery of tapchangers and parts to Rotek Industries on an as-and-when-required basis for a period of four years. The contract is re-issued and is governed by Eskom's Contractor Health and Safety Requirements standard, which mandates strict compliance with occupational health and safety legislation and Eskom's SHE policies.
Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years. The tapchangers must comply with Eskom's specification for power transformers rated 1.25 MVA and above, including requirements for on-load tap changers, off-circuit tapping switches, and associated control and indicating equipment.
240-12248652 (Rev 7) - List of Tender Returnables.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries (ERI) on an as-and-when-required basis for a period of four years. The tender is a re-issue and includes quality management system requirements and quality control plan deliverables.
E-tendering Help Manual for supplier -.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years.
BOQ to be completed by bidders.pdf
Supply and delivery of tapchanger spares for ATL, BRUSH, Ferranti, and Hawker Siddeley/Fuller tapchangers to Eskom Rotek Industries on an as-and-when-required basis for a period of four years.
Annexure K - Tapchanger Spares.pdf
Supply and delivery of Ferranti, ATL and English Electric tapchanger spares to Eskom Rotek Industries (ERI) on an as-and-when-required basis for a period of four years. The contract includes mandatory supplier development and localisation commitments covering local content, skills development, job creation and socio-economic development.
240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years. The contract requires the successful bidder to implement a Contract Quality Plan in accordance with the provided template, which outlines quality management, documentation, and inspection requirements.
Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years, under an NEC3 Term Supply Contract.
240-105658000 Supplier QM Spec Rev 3-QM 58.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years. The supplier must comply with Eskom's Supplier Quality Management specification, which requires a formal quality management system aligned to ISO 9001, with quality documentation submitted as part of the tender.
240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years.
240- 68099512 (Rev 9) - Form A Tender & Contract Quality Requirements for 240-105658000 and Quality Requirements for ISO 9001 Standard.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries (ERI) on an as-and-when-required basis for a period of four years. The tender includes quality requirements aligned with ISO 9001 and Eskom's specific quality clauses.
SOW.pdf
Supply and delivery of Hawker Siddely, Brush and Ferranti tap changer spares to Eskom Rotek Industries in Rosherville, Gauteng, on an as-and-when-required basis for a period of four years. The contract covers components fitted to power transformers and shunt reactors, including technical support for installation and use.
NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdf
Supply and delivery of Ferranti, ATL and English Electric tap changer spares for power transformers to Eskom Rotek Industries on an as-and-when-required basis for a period of four years, under an NEC3 Supply Contract (SC3).
Quality Requirements (004).pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years.
240-106084675 Annexure C 3.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years. The tender is a re-issue and is classified as low-risk work.
HFB Tap changers spares Tech Evalaution..pdf
Supply and delivery of ATL, BRUSH and Ferranti tap changer spares to Eskom Rotek Industries on an as-and-when-required basis for a period of four years. The contract is re-issued and requires bidders to meet a technical evaluation threshold of 80%.
240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years. The tender is a re-issue and is open to bidders who can meet Eskom's environmental and safety requirements.
Tapchanger & Parts CPA.pdf
Supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four years.
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
EskomWin Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubLearn how to submit a winning bid with these related articles
Median Estimate
R 1 437 500
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
This is Eskom's Supplier Quality Management Specification (240-105658000, Rev 3, QM 58). It sets out minimum quality requirements for all existing and potential Eskom suppliers, including sub-suppliers, across all divisions. It specifies the development, implementation, maintenance, and improvement of a QMS based on ISO 9001. It references ISO 10005 for quality plans, ISO 9000, ISO 9004, Eskom's SHEQ policy, procurement policies, PPPFA, and other standards.
Important Dates
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf (unknown)Closing date: 3 December 2026 at 10:00 (as per tender record).
Contact Information
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf (unknown)No named SCM or technical contacts provided in the specification.
Submission Guidelines
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf (unknown)Returnables - complete, sign and submit with the bid:
Evaluation Criteria
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf (unknown)Evaluation stages:
Technical Specifications
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf (unknown)This specification defines the minimum quality requirements for suppliers to Eskom across all divisions, subsidiaries, and sub-suppliers. It applies to all RFIs, RFQs, RFPs, and contracts. Suppliers must develop, implement, maintain, and continually improve a quality management system (QMS) based on ISO 9001, and conform to Eskom quality requirements throughout the contract. The specification covers quality criteria, selection, evaluation (vendor registration), management, monitoring, assessment, and auditing of suppliers. It references ISO 9001, ISO 10005 (quality plans), ISO 9000, ISO 9004, and other Eskom procurement and SHEQ policies.
Methodology
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdfMethod statements and execution plans:
Experience & Qualifications
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdfQuality audits and reviews must be performed by trained, accredited, and experienced personnel, in accordance with documented procedures.
Quality Management
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdfQuality management requirements (ISO 9001-based):
Pricing Schedule
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdfNo pricing schedule or financial details provided in this specification.
Financial Requirements
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf (unknown)No financial requirements stated.
Compliance Requirements
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdf (unknown)Supplier and sub-suppliers must maintain a formal QMS conforming to the latest ISO 9001 (or applicable QMS standard), with documented information including quality manual, plans, work instructions.
Health & Safety
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdfReferences to Eskom's SHEQ Policy (32-727) in the specification indicate health, safety, environment, and quality requirements apply. No specific OHS plans or HSE compliance measures detailed in this extract; refer to the SHEQ policy and tender documentation.
Contractual Terms
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdfPreservation programme requirements (standard conditions):
Section
Source: 240-105658000 Supplier QM Spec Rev 3-QM 58.pdfEvaluation is based on compliance with the quality requirements in this specification, including submission of the applicable quality documentation per the selected category, and successful completion of capability and capacity assessment if applicable.
Description
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdfThe tender scope is the supply and delivery of tapchangers and parts to Eskom RoteK Industries, on an as-and-when-required basis over four years.
The Contract Quality Plan must cover scope categories: design, manufacturing, supply and delivery/transportation, construction/installation/maintenance, commissioning, professional services, and other.
Communication channels for quality matters include emails, minutes, fixed contract meetings, and weekly progress meetings.
Organogram must show roles, responsibilities, QA/QC functions, and work verification.
Index of interfacing documents (processes, standards, codes, specifications) must be provided.
Suppliers and sub-suppliers must be listed, with outsourced activities and selection criteria.
Monitoring of suppliers and sub-contractors via inspection reports, audit schedules, inspection plans, and material verification.
Index of items manufactured, refurbished, or purchased, with serial numbers and production schedules.
Items requiring QCP/ITP (offsite and onsite) must be identified.
Special controls (welding, NDT/NDE) and associated QC activities must be described.
Documented information to be submitted to Eskom (technical records, inspection reports, signed QCPs, warranties, material certificates, method statements).
Important Dates
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdf (unknown)The document does not contain tender-specific closing dates beyond the official closing date in the tender record.
Contact Information
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdf (unknown)No contact information (names, emails, telephones, addresses) is provided in the document.
Evaluation Criteria
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdf (unknown)Tender submission must include a completed Contract Quality Plan (CQP) using the Eskom template identifier 240-109253698 Rev 3.
No other evaluation criteria (e.g., scoring split, minimum score, preference points) are stated in this document.
Technical Specifications
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdf (unknown)The tender is for the supply and delivery of tapchangers and parts to Eskom RoteK Industries, on an as-and-when-required basis for a period of four years.
The Contract Quality Plan template must be completed to describe:
Methodology
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdfMethod statements, safe working procedures, PQRs, and repair procedures must be kept current.
A register of non-conformances/defects/punch items with analysis must be maintained.
Databook status registers and monthly analysis reports must be produced.
Audit findings reports and action registers must be maintained and analysed.
Experience & Qualifications
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdfThe Contract Quality Plan must include an organogram showing team members' responsibilities and qualifications necessary to fulfil stated duties.
Work verification must be defined (who carries out tasks and who checks them).
An index of interfacing documents (processes, standards, codes, specifications) must be provided.
Quality Management
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdfThe Contract Quality Plan must be developed referencing guidelines for quality plans (SANS 466:2005 Edition 1 / ISO 10005:2005 Edition 2).
Key definitions: Quality Management System, Quality Plan, Quality Assurance (QA), Quality Control (QC), Supplier, Sub-supplier, Subcontractor, Quality objectives, Quality policy, Risk management, Documented information, Method statements.
Scope of work must be described as per NEC or FIDIC documents.
Index of interfacing documents and items requiring QCP/ITP must be included.
Special controls for processes like welding and NDT/NDE must be described with QC activities.
Documented information to be submitted to Eskom includes technical records, inspection reports, signed QCPs, warranties, material certificates.
Concession and non-conformance management processes must be described.
Customer property must be handled per ISO 9001 requirements.
Compliance Requirements
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdf (unknown)No specific compliance requirements (CSD, tax clearance, B-BBEE, CIDB, CIPC, etc.) are stated in the provided document.
Health & Safety
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdfMethod statements are required to describe in logical sequence how a job is carried out safely, including risk assessment and control measures.
Safe working procedures and repair procedures must be submitted to Eskom.
Contractual Terms
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdfPost-delivery activities must address warranty period and conditions, customer satisfaction measurement, technical support, defect correction period, and retention funds.
Consider statutory, regulatory, and scope-of-work requirements when determining post-delivery activities.
Section
Source: 240-109253698 (Rev 3) - Contract Quality Plan (QCP) - Template.pdfThe Contract Quality Plan is a required submission. It is compiled at Rev 0 during tender evaluation and must be updated to Rev 1 after contract signing. The plan must be reviewed and accepted by Eskom after award. No other evaluation criteria are stated in this document.
Description
Source: 32-136 Contractor Health and Safety Requirements.pdfEskom requires that all contractors adhere to its Contractor Health and Safety Requirements to achieve a common goal of Zero Harm.
The standard applies to all contractors, suppliers, vendors, service providers and consultants working for Eskom or its subsidiaries.
Contractors are responsible for developing their own SHE plans/procedures where specialised activities are not fully addressed by the standard.
Submission Guidelines
Source: 32-136 Contractor Health and Safety Requirements.pdf (unknown)Returnable documents:
Submission requirements:
Evaluation Criteria
Source: 32-136 Contractor Health and Safety Requirements.pdf (unknown)Bidders must be registered on the Central Supplier Database (CSD) and hold a valid SARS tax clearance (Tax Compliance Status).
Bidders must comply with Eskom's Contractor Health and Safety Requirements.
Where construction work is involved, the contractor must comply with the Construction Regulations of the OHS Act and relevant professional registration requirements (e.g., SACPCMP).
Technical Specifications
Source: 32-136 Contractor Health and Safety Requirements.pdf (unknown)The scope of work is the supply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis for a period of four (4) years.
Bidders must comply with Eskom's Contractor Health and Safety Requirements, including:
Experience & Qualifications
Source: 32-136 Contractor Health and Safety Requirements.pdfA competent person is one with the knowledge, training, experience and qualifications specific to the task, registered where required (e.g., SAQA).
Contractors must ensure that employees and appointed contractors comply with all applicable occupational health and safety legislation and Eskom procedures.
Quality Management
Source: 32-136 Contractor Health and Safety Requirements.pdfCompliance with ISO 9001 Quality Management Systems is referenced.
Material and equipment must conform to manufacturer and legislative health and safety requirements.
Regular audits and inspections are required to maintain efficiency and statutory observance.
Compliance Requirements
Source: 32-136 Contractor Health and Safety Requirements.pdf (unknown)Eligibility and compliance:
Health and safety compliance:
Health & Safety
Source: 32-136 Contractor Health and Safety Requirements.pdfContractors must comply with Eskom's Contractor Health and Safety Requirements, including:
Environmental
Source: 32-136 Contractor Health and Safety Requirements.pdfContractors must handle asbestos and asbestos-containing materials only in accordance with the Asbestos Regulations of the OHS Act.
A hearing conservation programme is required when the 8-hour noise rating level is 85 dBA or above.
Regular audits must be conducted to maintain environmental and statutory compliance.
Contractual Terms
Source: 32-136 Contractor Health and Safety Requirements.pdfEskom's Group Chief Executive has overall responsibility for health and safety; duties may be delegated to section 16(2) appointees and responsible managers.
The contractor remains accountable for its own and its appointed contractors' compliance with Eskom's SHE requirements and relevant legislation.
Section
Source: 32-136 Contractor Health and Safety Requirements.pdfBidders must have an appropriate SHE management system that demonstrates compliance with legal requirements.
Registration with CSD and valid tax clearance are required.
Compliance with Eskom's health and safety requirements is a condition of contract.
Description
Source: BOQ to be completed by bidders.pdfThe bill of quantities covers spares for three tapchanger types: AT/ATV 317, DS2/DS300/DS400/ES3, and F 317. Bidders must price each line item and provide totals for each section and grand totals for each of the four years.
Technical Specifications
Source: BOQ to be completed by bidders.pdf (unknown)The bill of quantities lists spares for three tapchanger types, with quantities, part numbers, and unit prices to be completed by bidders.
Description
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdfThe tender is for the supply and delivery of tapchangers and parts to Eskom Rotek Industries for a period of four years, on an as-and-when-required basis. The contract will be governed by the NEC3 Term Supply Contract. The tender documents are provided free of charge. The tender is an open invitation.
Important Dates
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf (RFP)Closing date: 01 December 2026 at 10h00
Clarification meeting (compulsory): 18 November 2026 at 11h00, via Microsoft Teams. Link: https://teams.microsoft.com/meet/3164264472028029?p=LyajNgbTuqbMT208v3
Clarification queries deadline: 5 working days before tender closing (i.e., approximately 24 November 2026).
Tender validity period: 120 days from closing date and time.
Contact Information
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf (RFP)Eskom Representative:
Fraud and corruption reporting:
Submission portal: https://tenderbulletin.eskom.co.za/
Submission Guidelines
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf (RFP)Submission method: electronic only via the Eskom E-tendering site at https://tenderbulletin.eskom.co.za/ by 01 December 2026 at 10h00. No hard copies accepted. Upload under folders: Technical, Commercial, Financial, and Other. All documents in PDF format; the price list must also be submitted in Excel format. No zip/condensed files. Maximum upload size per document is 500 MB; total submission limited to 4 GB. If resubmitting, only the latest version is considered; previous versions become null and void. Ensure the submission status is marked complete.
Returnable forms (must be completed, signed where required, and submitted at closing; failure to do so disqualifies the tender):
Non-disqualifiable returnables (if incomplete, bidder has 5 working days to rectify):
Disqualification risks:
Evaluation Criteria
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf (RFP)Evaluation stages:
Objective criteria (applicable):
Eskom may award to a tenderer other than the highest scorer if objective criteria justify it.
Contractual requirements (not evaluation criteria, assessed after ranking):
Reverse e-auction: not applicable.
Technical Specifications
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf (RFP)Scope: Supply and delivery of tapchangers and parts to Eskom Rotek Industries.
Contract period: 4 years, on an as-and-when-required basis.
The tender is for the whole contract; alternative tenders are not allowed.
Successful tenderer may be required to provide cataloguing information per item after award, and must label all materials per Eskom's labelling specifications. If cataloguing is required, a line item must be included in the pricing schedule; Eskom pays for cataloguing.
No CIDB grading required (not applicable for this goods/services contract).
No Contract Skills Development Goals (CSDG) or Contract Participation Goals (CPG) applicable.
Pricing Schedule
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdfThe pricing schedule/BOQ is attached as part of the tender pack. It must be submitted in PDF and Excel format. The completed pricing schedule is a returnable. Prices are evaluated inclusive of VAT, corrected for arithmetical errors, and compared on Net Present Value basis. Cataloguing may be a line item if required; Eskom pays for cataloguing.
Financial Requirements
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf (RFP)Pricing schedule: must be submitted in PDF and Excel format. Completed pricing schedule is a returnable.
Payment terms:
Security: If a performance bond or demand guarantee is required, the tenderer must select at least two financial institutions from Eskom's approved list.
Financial viability: audited financial statements for the past 3 years are required as part of objective criteria evaluation. The statements must be of the tendering company (not parent), including background, signed director's report, signed auditor's/reviewer's/compiler's report, statement of financial position, comprehensive income, changes in equity, cash flows, and notes. For unincorporated JV/SPV, each partner must submit its own statements.
Public interest score and ITA34C required for South African entities that are not audited.
Compliance Requirements
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdf (RFP)Eligibility:
Mandatory contractual requirement:
Tax compliance:
B-bbee:
Employment Equity:
Safety:
Quality and environmental:
CIDB: Not applicable.
Health & Safety
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdfSHE tenders returnable are evaluated as per Annexure B, C3, and C5. COIDA certificate of good standing or proof of application is required from South African tenderers. Other safety/quality documents as required per scope of work must be submitted. Contract Skills Development Goals (CSDG) and Contract Participation Goals (CPG) are not applicable to this tender.
Contractual Terms
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdfThe conditions of contract will be the NEC3 Term Supply Contract. The contract period is four years. Payment terms: Eskom pays within 30 days for contracts below R50 million (incl. VAT) and within 60 days for contracts above R50 million (incl. VAT), from receipt of undisputed invoices. Eskom reserves the right to negotiate with preferred bidders if tendered prices are not market-related. Main contractors are discouraged from subcontracting with subsidiaries; if they do, it must be declared. Tender validity period is 120 days from closing. Performance security may be required; if so, the bidder must select at least two financial institutions from Eskom's approved list.
Section
Source: Invitation to Tender (ITT) or Request for Proposal (RFP) - Re-issue Tapchangers Parts approved.pdfFunctionality requirements are applicable. The minimum qualifying score for functionality is 80%. Prices are scored out of 80 points. Specific Goals are scored out of 20 points under the PPPFA 80/20 system. If a tenderer fails to submit evidence for a Specific Goal, it scores 0 for that goal but is not disqualified. Ranking is by total score (price + specific goals) from highest to lowest. Objective criteria include SHE, quality, and financial evaluation. Contractual requirements are assessed after ranking and are not evaluation criteria.
Description
Source: Annexure K - Tapchanger Spares.pdfSupply and delivery of Ferranti, ATL and English Electric tapchanger spares to ERI over four (4) years on an as-and-when-required basis. The procurement is used to promote socio-economic transformation, empowerment of small, rural and township enterprises and designated groups, and local industrial development. ERI reserves the right to award to a supplier that commits to transformation through a B-BBEE improvement or retention plan, skills development, job creation and socio-economic development for beneficiaries in the local municipalities where the service is consumed.
Submission Guidelines
Source: Annexure K - Tapchanger Spares.pdf (unknown)Returnable documents
Evaluation Criteria
Source: Annexure K - Tapchanger Spares.pdf (unknown)Preference points
Technical Specifications
Source: Annexure K - Tapchanger Spares.pdf (unknown)Scope
Financial Requirements
Source: Annexure K - Tapchanger Spares.pdf (unknown)Skills development
Socio-economic development
Penalty
Compliance Requirements
Source: Annexure K - Tapchanger Spares.pdf (unknown)B-bbee
Job creation
Local content
Reporting
Section
Source: Annexure K - Tapchanger Spares.pdfPreference points are allocated under a preference point system based on specific goals. The SDL&I Matrix is not an evaluation criterion, but the successful supplier must submit its SDL&I proposals before it is eligible for award under section 2(1)(f) of the PPPFA. Matrix weighting: Local Content to South Africa 50% (proposed target 100%) and Skills Development 50%, totalling 100%.
Description
Source: Quality Requirements (004).pdfSupply and delivery of tapchangers and parts to ESKOM Rotek Industries over four (4) years, on an as and when required basis.
Quality framework applying to the supply:
Submission Guidelines
Source: Quality Requirements (004).pdf (unknown)Returnable documents
Submission channel, address, copy count and closing time are not stated in the available source text.
Evaluation Criteria
Source: Quality Requirements (004).pdf (unknown)Quality compliance gate
No points split, preference point system or minimum qualifying score is stated in the available source text.
Technical Specifications
Source: Quality Requirements (004).pdf (unknown)Scope
Quality standards to be applied
Quantities, delivery points and item-level specifications are not stated in the available source text.
Compliance Requirements
Source: Quality Requirements (004).pdf (unknown)Quality compliance
Returnable documents
CSD registration, tax status, B-BBEE level and CIDB grading are not stated in the available source text.
Section
Source: Quality Requirements (004).pdfBidders are assessed on compliance with the stated quality requirements:
No scoring formula, preference point system or minimum threshold is stated in the available source text.
Description
Source: 240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdfSupply and delivery of tapchangers and parts to Eskom Rotek Industries on an as-and-when-required basis over four years, with the appointed main supplier responsible for selecting, notifying and managing any contractors or suppliers it uses to execute the work.
Submission Guidelines
Source: 240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdf (unknown)Returnable document
Disqualification risk
Technical Specifications
Source: 240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdf (unknown)Scope
Subcontracting and supplier management
Quality Management
Source: 240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdfCompliance Requirements
Source: 240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdf (unknown)SHE compliance — mandatory for the bidder and its supply chain
Post-award obligations
Health & Safety
Source: 240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdfApplicable SHE framework
Bidder obligations
Contractual Terms
Source: 240-77471499 (2) Annexure B - Acknowledgement Form for Eskom SHE Rules and other Requirements (2).pdfSupply chain accountability
Consequences
Description
Source: SOW.pdfSupply and delivery of Hawker Siddely, Brush and Ferranti tap changer spares for power transformers and shunt reactors, delivered to the purchaser's Rosherville premises over a four-year period on an as-and-when-required basis.
Technical Specifications
Source: SOW.pdf (unknown)Scope
Standards
Delivery
Inspection
Quality Management
Source: SOW.pdfInspection
Delivery documentation
Handling
Financial Requirements
Source: SOW.pdf (unknown)Pricing
Compliance Requirements
Source: SOW.pdf (unknown)Technical compliance
Contractual Terms
Source: SOW.pdfContract period
Description
Source: 240- 68099512 (Rev 9) - Form A Tender & Contract Quality Requirements for 240-105658000 and Quality Requirements for ISO 9001 Standard.pdfSupply and delivery of tapchangers and parts to Eskom Rotek Industries (ERI) over a four (4) year period, on an as-and-when-required basis.
Quality obligations are set by Eskom specification 240-105658000 and Form A (240-68099512 Rev 9). Pre-contract award, Category 3 applies (clause 3.5); only one category may be selected and Categories 1, 2 and 4 do not apply. The main supplier and sub-supplier capability and capacity assessment does not apply.
Post-contract award, contract execution and supplier quality performance monitoring apply (clause 3.7).
Contact Information
Source: 240- 68099512 (Rev 9) - Form A Tender & Contract Quality Requirements for 240-105658000 and Quality Requirements for ISO 9001 Standard.pdf (unknown)Eskom quality representative
Submission Guidelines
Source: 240- 68099512 (Rev 9) - Form A Tender & Contract Quality Requirements for 240-105658000 and Quality Requirements for ISO 9001 Standard.pdf (unknown)Returnable document
Technical Specifications
Source: 240- 68099512 (Rev 9) - Form A Tender & Contract Quality Requirements for 240-105658000 and Quality Requirements for ISO 9001 Standard.pdf (unknown)Scope
Quality requirements
Quality Management
Source: 240- 68099512 (Rev 9) - Form A Tender & Contract Quality Requirements for 240-105658000 and Quality Requirements for ISO 9001 Standard.pdfGoverning documents
Pre-contract award
Post-contract award
Standard conditions
ISO 9001 coverage
Compliance Requirements
Source: 240- 68099512 (Rev 9) - Form A Tender & Contract Quality Requirements for 240-105658000 and Quality Requirements for ISO 9001 Standard.pdf (unknown)Quality system
Returnable form
Description
Source: 240-12248652 (Rev 7) - List of Tender Returnables.pdfSupply and delivery of tapchangers and parts to ESKOM Rotek Industries (ERI) over four (4) years, on an as-and-when-required basis. The tender pack includes a list of tender returnables under Category 3: Quality Requirements, setting out the quality management deliverables bidders must submit and the evidence that will be evaluated. Reference specifications: 240-105658000, 240-109253698 and 240-109253302. Returnables list issued 18 May 2026 under unique identifier 240-12248652, revision 7.
Contact Information
Source: 240-12248652 (Rev 7) - List of Tender Returnables.pdf (TENDER)ESKOM representative
Submission Guidelines
Source: 240-12248652 (Rev 7) - List of Tender Returnables.pdf (TENDER)Returnable documents for this bid
Scoring of these deliverables is set out under Category 3: Quality Requirements.
Evaluation Criteria
Source: 240-12248652 (Rev 7) - List of Tender Returnables.pdf (TENDER)Quality evaluation — Category 3: Quality Requirements
Deliverables are scored; each item marked "Apply = 1" is a required deliverable.
Section A — Quality Management System (one of two options)
Section B — Evidence of QMS in operation (Ref 240-105658000)
Section C — Contract Quality Plan (Ref 240-105658000 and 240-109253698)
Section D — Quality Control Plan (Ref 240-105658000 or 240-109253302)
Section E — Additional user-defined requirements (Ref 240-105658000)
Recorded scores: Section A Option 1 = 0; Section A Option 2 = 7; Section B = 2; Section C = 1; Section D = 1; Section E = 1.
Technical Specifications
Source: 240-12248652 (Rev 7) - List of Tender Returnables.pdf (TENDER)Scope
Quality deliverables required with the bid
Reference specifications: 240-105658000; 240-109253698; 240-109253302.
Compliance Requirements
Source: 240-12248652 (Rev 7) - List of Tender Returnables.pdf (TENDER)Quality management system
Returnable forms
Section
Source: 240-12248652 (Rev 7) - List of Tender Returnables.pdfCategory 3: Quality Requirements — scored deliverables
Section A — Quality Management System
Section B — Evidence of QMS in operation (Ref 240-105658000)
Section C — Draft Contract Quality Plan specific to the scope of work, to ISO 10005 (Ref 240-105658000 and 240-109253698). Recorded score: 1.
Section D — Quality Control Plan, checklist or ITP for the scope of works, to ISO 10005; a draft or example from similar or previous work is accepted (Ref 240-105658000 or 240-109253302). Recorded score: 1.
Section E — E.1 Form A completed and signed: 1; E.2 other requirements per the scope of work or specification: 0. Recorded Section E score: 1.
Submission Guidelines
Source: 240-106084675 Annexure C 3.pdf (unknown)OHS returnable documents to accompany the bid (Part A)
Alternative route for certified bidders (Part B)
Outcome
Evaluation Criteria
Source: 240-106084675 Annexure C 3.pdf (unknown)OHS assessment
Technical Specifications
Source: 240-106084675 Annexure C 3.pdf (unknown)Scope
OHS deliverables
Methodology
Source: 240-106084675 Annexure C 3.pdfCompliance Requirements
Source: 240-106084675 Annexure C 3.pdf (unknown)Mandatory compliance
Health & Safety
Source: 240-106084675 Annexure C 3.pdfPart A — bidders without a certified auditable OHS system
Part B — bidders certified for an auditable OHS system
Outcome
Description
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdfPurpose
Objectives
Background
Submission Guidelines
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdf (unknown)Tender deliverables required with the bid
Evaluation Criteria
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdf (unknown)Adjudication of tenders
Technical Specifications
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdf (unknown)Scope of supply
Design review
Technical requirements
Methodology
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdfDesign review process
Clearances and layout
Design basis
Quality Management
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdfQuality system
Verification
Financial Requirements
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdf (unknown)Loss evaluation
Compliance Requirements
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdf (unknown)Standards and certification
Tender deliverables
Health & Safety
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdfApplicable requirements
Safety in design and service
Environmental
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdfEnvironmental objectives
Geomagnetically induced currents
Materials
Contractual Terms
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdfDeviations
Precedence and obligations
Section
Source: Specifications for Power transformers ST_240-68973110 specification Rev 3 TC signed.pdfAdjudication factors
Description
Source: HFB Tap changers spares Tech Evalaution..pdfSupply and delivery of ATL, BRUSH and Ferranti tap changer spares to Eskom Rotek Industries, on an as-and-when-required basis over a four-year period.
Submission Guidelines
Source: HFB Tap changers spares Tech Evalaution..pdf (unknown)Returnable documents
Evaluation Criteria
Source: HFB Tap changers spares Tech Evalaution..pdf (unknown)Technical evaluation — 100 points total
Minimum qualifying score: 80% weighted technical score.
Criteria and weighting
Scoring detail
Technical Specifications
Source: HFB Tap changers spares Tech Evalaution..pdf (unknown)Scope
Method statement requirements
Methodology
Source: HFB Tap changers spares Tech Evalaution..pdfMethod statement (20 points)
Experience & Qualifications
Source: HFB Tap changers spares Tech Evalaution..pdfCompany profile (20 points)
Related experience
Compliance Requirements
Source: HFB Tap changers spares Tech Evalaution..pdf (unknown)Compulsory returnable
Section
Source: HFB Tap changers spares Tech Evalaution..pdfTechnical evaluation — 100 points, minimum qualifying score 80%.
Description
Source: 240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdfSupply and delivery of tapchangers and parts to Eskom Rotek Industries over a four-year term, on an as-and-when-required basis. The environmental evaluation card applies according to whether the work is classified as low, medium or high environmental risk.
Submission Guidelines
Source: 240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdf (unknown)Returnable environmental documents (submitted with the bid):
Note: the submission channel, address, number of copies and closing time are not set out in this evaluation card.
Evaluation Criteria
Source: 240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdf (unknown)Evaluation is a pass/fail compliance check against the environmental scoring card, scored per item:
Part A items
Part B items
Which items apply depends on the risk classification of the work (low, medium or high).
Technical Specifications
Source: 240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdf (unknown)Scope: supply and delivery of tapchangers and parts to Eskom Rotek Industries over a four-year period, on an as-and-when-required basis.
Environmental deliverables by risk category
Low risk
Medium risk
High risk (all of the above, plus)
Compliance Requirements
Source: 240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdf (unknown)Environmental compliance evidence required with the bid:
CSD registration, tax status, B-BBEE and CIDB requirements are not addressed in this evaluation card.
Health & Safety
Source: 240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdfSHE requirements
Incident and emergency arrangements
Environmental
Source: 240-108987034 Environmental Tender Evaluation and Scoring Card (High Medium and Low risk work) - Copy.pdfEnvironmental Management Plan — minimum content by risk level
Low risk
Medium risk
High risk
Company policy
Certification
Description
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdfThe contract covers the supply and delivery of Ferranti, ATL and English Electric tap changer spares for power transformers, on an as-and-when-required basis over a period of 4 years. It is an NEC3 Supply Contract (SC3) between Eskom Rotek Industries SOC Ltd and the supplier, comprising Part C1 (Agreements and Contract Data), Part C2 (Pricing Data) and Part C3 (Scope of Work).
Contact Information
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdf (unknown)Supply Manager
Purchaser
Delivery address
Submission Guidelines
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdf (unknown)Returnable documents
Technical Specifications
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdf (unknown)Scope
Delivery
Supplier obligations
Defects
Pricing Schedule
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdfPrice Schedule
Amount due
Tax invoice
Financial Requirements
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdf (unknown)Pricing
Payment
Delay damages
Liability
Guarantees and insurance
Compliance Requirements
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdf (unknown)B-bbee
Ethics
Joint ventures
Other
Health & Safety
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdfOHS compliance
Asbestos
Site access
Environmental
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdfEnvironmental compliance
Contractual Terms
Source: NEC SUPPLY CONTRACT OF Ferranti ATL and English Electric draft 1 (003).pdfContract form
Key dates and periods
Liability
Delay damages
Dispute resolution
Additional conditions (Z1 to Z15)
Description
Source: Tapchanger & Parts CPA.pdfContract price adjustment (proposed CPA)
Technical Specifications
Source: Tapchanger & Parts CPA.pdf (unknown)Scope of supply
Financial Requirements
Source: Tapchanger & Parts CPA.pdf (unknown)Contract price adjustment
Description
Source: E-tendering Help Manual for supplier -.pdfEskom operates a web-based eTendering system that replaces the physical delivery of bid documents to Eskom tender offices. Suppliers register once, then upload their bid against the advertised tender reference.
Access points
Registration and access
Closed tenders
Support
Submission Guidelines
Source: E-tendering Help Manual for supplier -.pdf (TENDER)Submission channel
Uploading the bid
Support
Compliance Requirements
Source: E-tendering Help Manual for supplier -.pdf (TENDER)CSD registration
Portal registration
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
Corner Hunslet and Lower Germiston Road - ROSHERVILLE - Gauteng - 2022
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
18
Last checked
15 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Key Personnel
Provinces Active
Industries
💡 Want more tendering tips and strategies?
Explore Our BlogGet deep intelligence on Services: General. Unlock full pricing strategies, bid frequency, and historical win rates.