LimLanga cluster- Mpumalanga - Mpumalanga areas Limpopo areas - Mpumalanga areas Limpopo areas - 0699
Organization Type
GOVERNMENT
Published
16 Nov 2026
OCDS Reference
ocds-9t57fa-178437
Summary
ESKOM requires mechanical building maintenance services on an as-and-when-required basis for its limlanga cluster in mpumalanga, under a 60-month contract. Bidders must submit the annexure c1 she tender returnable with proof of every listed OHS item, including a valid letter of good standing, a ceo-signed she policy, eight specified she competency training certificates, a scope-specific baseline risk assessment and three valid medical fitness certificates. The decisive risk is that the section a OHS legal requirements are assessed as responsive or non-responsive before contract award, so a missing or inadequate document can eliminate the bid regardless of price.
Key Requirements
Closing and submission: bids close on 15 December 2026 at 10:00; the submission method and address are not stated in the available text, so confirm them with Eskom SCM before bidding.
Section A OHS gate: the legal OHS requirements are assessed as responsive or non-responsive before contract award; any missing or non-compliant Section A document makes the bid non-responsive.
Letter of Good Standing: a valid COID, FEMA or RMA letter is required and must reflect the correct nature of business for mechanical building maintenance.
SHE competency certificates: submit certificates for first aid, fire fighting, risk assessment/HIRA, fall protection plan developer (US 229994), FAS and rescue (US 229995), working at heights (US 229998), SHE representative and incident management/investigation.
Risk assessment and organogram: provide a baseline risk assessment for the scope with consequence, likelihood and risk ratings plus mitigation measures, its procedure, and a CEO-dated and signed organogram naming key SHE personnel and general employees with references to OHSA sections and regulations.
Medical fitness and policies: submit three valid medical fitness certificates for the individuals whose training certificates are provided, a CEO/MD-signed SHE policy with a next review date and OHS Act Section 7 compliance, a substance abuse policy and a signed Annexure B acknowledgement of Eskom SHE rules.
Scoring and non-disqualifying items: each SHE document scores 0 if absent or below the minimum and 1 if it meets the minimum; safety, health and environmental management costing and the company incident management procedure are required but non-disqualifying, and the second evaluation is completed within 7 working days.
The provision of core technical services (mechanical building maintenance services) on as and when required basis) in limlanga cluster- mpumalanga for a period of 60 month
Briefing Session
Venue
Venue: Online – Microsoft Team LinkJoin: https://teams.microsoft.com/meet/3210409538683484?p=vrLIzZX
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
Document240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdfReview complete
Description
Important Dates
16 Nov
2026
PUBLICATION
Tender Published
Tender was published
15 Dec
2026
DEADLINE
Closing Date
Tender closing date
Procurement Rules & Compliance ContextThis tender may be governed by South African public procurement rules covering fairness, transparency, preferential procurement, anti-corruption, administrative justice and access to information.
7 rules
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
Core procurement rules
These rules commonly apply to South African public-sector procurement.
7
Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
high
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Constitution of the Republic of South Africa, 1996 – Section 217
Act 108 of 1996 (s217)
high
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Eskom requires mechanical building maintenance services, delivered on an as-and-when-required basis across the LimLanga cluster in Mpumalanga, under an NEC3 Term Service Contract for a period of 60 months. The scope is divided into two zones — Highveld and Lowveld — with two service providers to be appointed per zone.
Eskom requires the provision of core technical services — mechanical building maintenance services — on an as-and-when-required basis in the LimLanga cluster, Mpumalanga, for a period of 60 months. Bidders must submit a completed SHE tender returnable addressing Eskom's minimum occupational health and safety requirements.
240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdf
Eskom requires the provision of core technical services covering mechanical building maintenance on an as-and-when-required basis in the LimLanga cluster, Mpumalanga, over a 60-month period. The successful contractor must align its processes with Eskom's occupational health and safety requirements and manage its own contractors and suppliers to the same standard.
NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf
Eskom requires mechanical building maintenance services at its Property Management Mpumalanga Operating Unit, Lowveld Zone, delivered on an as-and-when-required basis over a 60-month period under an NEC3 Term Service Contract (TSC3) priced contract with price list.
NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf
Eskom requires a contractor to provide core technical services (mechanical building maintenance) at its Property Management Mpumalanga Operating Unit, Highveld Zone, on an as-and-when-required basis over a 60-month service period. The work is let under the NEC3 Term Service Contract (TSC3), main Option A (priced contract with price list), with task orders issued as work arises.
Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf
The provision of core technical services for mechanical building maintenance is being procured on an as and when required basis at the LimLanga cluster in Mpumalanga for a period of 60 months. The services are to be provided to Eskom Distribution Property Management facilities at the Lowveld and Highveld Zone in the Property Management Mpumalanga Operating Unit. The scope is supported by environmental requirements covering policy, waste management, emergency preparedness, induction and reporting.
Win Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Similar Tenders
Matched by category & region
Supplier Readiness Hub
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Supplies: GeneralFind supplies: general tenders and contract opportunities in South Africa. Browse active government procurement opportunities updated daily.
Based on 16 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
Source: 240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdf
Contractor or supplier appointments must be notified to Eskom before appointment and before work starts.
Submission Guidelines
Source: 240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdf (unknown)
Returnable: signed Eskom occupational health and safety (OHS) legal and other requirements acknowledgement.
Signatory: CEO, director or managing director.
Details required: company/supplier name, signature, date and witness name/signature.
Technical Specifications
Source: 240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdf (unknown)
Service scope: mechanical building maintenance services, supplied on an as-and-when-required basis.
Location: LimLanga cluster, Mpumalanga.
Contract period: 60 months.
Quality Management
Source: 240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdf
Contractor/supplier management:
Use a documented selection process that assesses competency, compliance and OHS performance.
Notify Eskom before appointing any contractor or supplier and before work starts.
Ensure contractors/suppliers have the resources and competencies needed for the work.
Remain accountable for managing and overseeing contractors/suppliers and for compliance with legal, regulatory, contractual and other requirements.
Run audits and assessments to verify OHS compliance throughout the work.
Manage non-conformances and non-compliances at all tiers using agreed performance and penalty mechanisms.
Eskom may verify any action taken against contractors/suppliers.
Compliance Requirements
Source: 240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdf (unknown)
OHS legislation: comply with the Occupational Health and Safety Act 1993 and its regulations, and the Compensation for Occupational Injuries and Diseases Act 1993 as amended.
Eskom OHS alignment: after award, align company processes to Eskom OHS policies, procedures and standards.
Induction: all contractor/supplier employees must complete Eskom induction and the bidder's own induction.
Contractor/supplier control: maintain a documented selection process covering competency, compliance and OHS performance; notify Eskom before appointment and before work starts; ensure resources and competencies; remain accountable for oversight; audit compliance; manage non-conformances under agreed performance and penalty mechanisms.
References: Eskom may require testimonials/references and client contact details for similar previous work.
Acknowledgement: sign the OHS acknowledgement confirming access to and understanding of the requirements and consequences of non-compliance.
Penalties: contractual penalties may apply for non-compliance by the main supplier or its contractors/suppliers.
Health & Safety
Source: 240-77471499 Annexure B Eskom Acknowledgement Form for OHS Legal and Other Requirements - Rev 4.pdf
OHS legal compliance:
Comply with the Occupational Health and Safety Act 1993 and its regulations.
Comply with the Compensation for Occupational Injuries and Diseases Act 1993 as amended.
Follow Eskom OHS policies, procedures, standards and other relevant requirements.
After contract award, align company processes to Eskom OHS requirements.
Ensure all employees complete Eskom induction and the bidder's company induction.
DocumentQUALITY 2026.zipReview complete
Description
Source: QUALITY 2026.zip
Specification purpose
Sets minimum quality requirements for existing and potential suppliers and sub-suppliers.
Requires a quality management system based on ISO 9001.
Applies to requests for information, quotations, proposals and contracts for products and services.
Covers quality plans, control plans, capability and capacity assessments, contract execution, performance monitoring, audits, access, information rights, preservation, nonconformities and special processes.
Submission Guidelines
Source: QUALITY 2026.zip (unknown)
Returnable quality documents
Form A (240-68099512): must be completed and signed by the bidder to confirm acceptance of the supplier quality requirements in specification 240-105658000/QM 58 and ISO 9001.
Additional quality returnables: submit the documents listed in Eskom document 240-12248652 for the applicable quality category.
Category 4 quality requirements apply.
Evaluation Criteria
Source: QUALITY 2026.zip (unknown)
Quality evaluation basis
Bidders must comply with specification 240-105658000 and ISO 9001.
Category 4 quality requirements apply.
Form A must be signed to confirm acceptance of the quality requirements.
The specification sets quality criteria for supplier selection, evaluation, vendor registration, management, monitoring, assessment and auditing.
Technical Specifications
Source: QUALITY 2026.zip (unknown)
Procurement scope
Provision of core technical services for mechanical building maintenance on an as-and-when-required basis.
Location: LimLanga cluster.
Contract period: 60 months.
Quality management requirements
The supplier and sub-suppliers must establish, implement, maintain and continually improve a quality management system aligned with ISO 9001.
Where required by the applicable quality category, the supplier must prepare a Contract Quality Plan and a Quality Control Plan/Inspection and Test Plan.
A method statement must cover the scope, objectives, responsibilities, resources, PPE, tools and equipment, risks, nonconformances, improvement actions, data analysis and stakeholder management.
Inspection and test methods, acceptance criteria, records and intervention points must be documented.
The supplier must permit audits, surveillance, access and quality performance monitoring.
Compliance Requirements
Source: QUALITY 2026.zip (unknown)
Quality compliance
Form A (240-68099512): signed acceptance of the supplier quality requirements and ISO 9001.
Quality management system: the supplier and sub-suppliers must conform to ISO 9001 unless specifically excluded by the tender returnables.
Certification: a valid ISO 9001 certificate from an accredited certification body is required unless excluded.
Quality category: Category 4 applies.
Returnables: quality documents must follow Eskom document 240-12248652.
Section
Source: QUALITY 2026.zip
Quality criteria
Supplier quality is assessed against specification 240-105658000 and ISO 9001.
Category 4 requirements apply.
Form A must be signed.
The specification defines criteria for supplier selection, evaluation, registration, management, monitoring, assessment and auditing.
DocumentMechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdfReview complete
Important Dates
Source: Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf (unknown)
Requirements effective: 23 February 2026
Review due: February 2028
Signed: 24 August 2026
Verified: 31 August 2026
Contact Information
Source: Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf (unknown)
Contacts
Name: Tsakani Chuma
Role: Environmental Officer (signed the requirements)
Name: Adeline Manake
Role: Environmental Manager (verified the requirements)
Service area
Property Management Mpumalanga Operating Unit
Lowveld and Highveld zones
Limlanga Cluster
Evaluation Criteria
Source: Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf (unknown)
Environmental requirements scoring
Method
Each requirement is marked on actual status: YES = 1 point, NO = 0 points.
Total available: 5 points (5/5 = 100%).
Scored requirements (1 point each)
Environmental policy signed by top management, dated and version controlled.
Waste Management Plan covering the listed waste streams.
Environmental emergency preparedness procedure with control measures.
Signed commitment that site personnel will attend Eskom's environmental induction before work starts.
Signed commitment to provide the required environmental records.
Sign-off
Signed by the Environmental Officer and verified by the Environmental Manager.
Technical Specifications
Source: Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf (unknown)
Scope
Mechanical building maintenance services for Eskom Distribution Property Management facilities.
Lowveld and Highveld zones, Property Management Mpumalanga Operating Unit (Limlanga Cluster).
Period: 60 months.
Basis: as and when required.
Site requirement
Personnel must complete Eskom's environmental management induction before starting work on site, at times set by Eskom.
Waste streams to be managed
Used mechanical parts, used oil, oily rags, oil filters, electrical waste, contaminated rags and scrap metal.
Compliance Requirements
Source: Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf (unknown)
Supplier documentation (each scored 1 or 0)
Environmental policy: signed by the CEO or managing director, dated and version controlled, committing to legal compliance, pollution prevention and continual improvement.
Waste Management Plan: covers used mechanical parts, used oil, oily rags, oil filters, electrical waste, contaminated rags and scrap metal.
Emergency preparedness plan: documented procedure with control measures for chemical spills, snakes and other environmental incidents.
Signed induction commitment letter: all service personnel will attend Eskom's environmental management induction before work starts.
Signed reporting commitment letter: covers the records listed under environmental reporting.
Health & Safety
Source: Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf
Hazardous substances
Keep an inventory of hazardous chemicals brought onto Eskom sites, with Safety Data Sheets.
Incidents
Report environmental incidents such as oil spills, with an incident report where applicable.
Provide waste manifests where applicable.
Emergency preparedness
Documented procedure with control measures covering chemical spills and snakes.
Site access
Personnel must complete Eskom's environmental management induction before starting work.
Environmental
Source: Mechanical Building Maitenance Environmental Tender Requirements Aug 2026.pdf
Policy
Signed by the CEO or managing director, dated and version controlled.
Commits the supplier to legal compliance, pollution prevention and continual improvement.
Waste Management Plan
Covers used mechanical parts, used oil, oily rags, oil filters, electrical waste, contaminated rags and scrap metal.
Emergency preparedness
Documented procedure with control measures for chemical spills, snakes and other environmental incidents.
Environmental induction
Signed commitment letter confirming that all service personnel will attend Eskom's environmental management induction before work on site begins.
Eskom schedules the induction and communicates the arrangements.
Environmental reporting
Signed commitment letter to give Eskom:
reports on environmental incidents such as oil spills, where applicable
an inventory of hazardous chemicals brought to Eskom sites, with Safety Data Sheets
Annexure C1 sets out the minimum OHS-related returnables for the mechanical maintenance tender. Section A contains legal OHS requirements applied before contract award; Section B contains non-disqualifying OHS requirements.
Valid Letter of Good Standing or equivalent (COID, FEMA or RMA) reflecting the correct nature of business.
Signed acknowledgement of the applicable SHE rules and requirements (Annexure B).
SHE policy signed by the CEO/MD, showing the next review date and compliance with OHS Act Section 7.
SHE competency training certificates for: first aid; fire fighting; risk assessment/HIRA; fall protection plan developer (US 229994); FAS and rescue training (US 229995); working at heights (US 229998); SHE representative; incident management/investigation.
Baseline risk assessment relevant to the scope of work, including consequence rating, likelihood rating, risk rating and detailed mitigation measures.
Baseline risk assessment procedure describing the methodology used.
Company organogram showing key SHE personnel and general employees, dated and signed by the CEO, with references to applicable OHSA sections and regulations.
Three valid medical fitness certificates for the individuals whose training certificates are submitted.
Substance abuse policy.
Non-disqualifying OHS documents
Costing for safety, health and environmental management.
Provide a valid Letter of Good Standing or equivalent (COID, FEMA or RMA) for the correct business activity.
Submit a signed acknowledgement of the applicable SHE rules and requirements (Annexure B).
Provide a SHE policy signed by the CEO/MD, with a next review date and OHS Act Section 7 compliance.
Provide SHE competency training certificates: first aid; fire fighting; risk assessment/HIRA; fall protection plan developer (US 229994); FAS and rescue training (US 229995); working at heights (US 229998); SHE representative; incident management/investigation.
Provide a baseline risk assessment covering SHE hazards and risks for the scope, with consequence, likelihood and risk ratings plus mitigation measures.
Provide the baseline risk assessment procedure and methodology.
Provide a company organogram identifying key SHE personnel and general employees, dated and CEO-signed, referencing OHSA sections and regulations.
Provide three valid medical fitness certificates for the trained individuals.
Provide a substance abuse policy.
Submit costing for safety, health and environmental management.
Provide a company incident management procedure.
DocumentNEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdfReview complete
Description
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf
General scope
Mechanical building maintenance services for Eskom Distribution Property Management facilities in the Lowveld Zone, Mpumalanga.
Services are ad hoc and continue for 60 months.
Service delivery
Contractor provides all labour, supervision, tools, equipment, transport and consumables.
Normal working hours are Monday to Friday, 07:00 to 16:00.
Work outside normal hours requires written instruction and is paid under BCEA rules.
Task control
Work proceeds only after quotation and Task Order approval, except emergencies.
Prior written approval from the Eskom Dx Facilities Official is required.
Pricing items
Hourly rates are required for SHE Officer, Mechanical Supervisor, Diesel Mechanic, Fitter, Semi-Skilled Assistant and General Worker.
Separate rates apply for normal hours, Saturday/after-hours and Sunday.
Plant and materials carry a 10% mark-up; 20m boom lift and COC are priced items.
Travel
Kilometre charges are measured from Mbombela Brown Street; transport costs require approval.
Important Dates
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf (unknown)
Closing: 15 December 2026 at 08:00 UTC
Contract start: TBA
Service period: 60 months
Contractor's first plan: within one week of the Contract Date
Price adjustment base date: one month before the tender closing date
Prices fixed: first 16 months from contract start
Payment assessment: last day of each month
Payment period: four weeks
Tax invoice: within one week of payment certificate
B-BBEE status change notification: within 7 days; updated certificate within 30 days
Task Order programme: within 2 days of receiving Task Order
Compensation event notice: within 8 weeks of becoming aware
End of liability: one month after service period
Contact Information
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf (unknown)
Employer
Eskom Holdings SOC Ltd
Megawatt Park
Maxwell Drive
Sandton
Johannesburg
Telephone: 011 800 8111
Service Manager: TBC
Affected property: Mpumalanga Operating Unit, Lowveld Zone
Document source contact
Engineering Contract Strategies
Telephone: 011 803 3008
Fax: 086 539 1902
Website: www.ecs.co.za
Submission Guidelines
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf (unknown)
Returnable document
C1.1 Form of Offer and Acceptance: signed by a duly authorised representative; the tenderer's CIDB registration number must be inserted.
Alternative tenders
A separate Form of Offer and Acceptance must be used for each alternative tender.
Evaluation Criteria
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf (unknown)
Evaluation
No scoring split, minimum qualifying score or preference-point system is stated.
Mandatory status requirements
CIDB registration number must be provided on the Form of Offer.
B-BBEE minimum level: Level 2.
VAT registration and compliance with the Value Added Tax Act apply to South African companies.
Technical Specifications
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf (unknown)
Scope
Mechanical building maintenance services for Eskom Distribution Property Management facilities in the Mpumalanga Operating Unit, Lowveld Zone.
Services are provided on an as-and-when-required basis over 60 months.
Contractor supplies labour, supervision, tools, equipment, transport, consumables and other resources.
Normal working hours
Monday to Friday, 07:00 to 16:00, unless otherwise instructed.
Rates include overheads, profit, statutory obligations and labour-law compliance for normal hours.
After-hours work must be instructed or approved in writing and is paid under BCEA and applicable labour rules.
Task orders and approvals
Each task requires a quotation and Task Order approval by the Eskom Dx Facilities Official, except emergencies.
Prior written approval is required before work starts.
Labour and transport must be sourced closest to the affected site.
Call-out rules
Work started in normal hours and finishing after hours is paid at normal-hour rates.
Work started after normal hours is paid at after-hours rates.
Pricing resources
Rate items are required for Part-time Construction SHE Officer (SACPCMP), Mechanical Supervisor, Artisan Diesel Mechanic (trade test), Artisan Fitter (trade test), Semi-Skilled Assistant and General Worker/Labourer.
Separate rate schedules apply for Monday-Friday normal hours, Saturday/after-hours and Sunday.
Payment for after-hours or Sunday work requires a special site instruction.
Plant and materials
Equipment, materials and spares are priced on a defined cost-plus basis with a 10% mark-up.
Skyjack Mobile Boom Lift 20m is priced as a day rate.
Issuing of a Certificate of Compliance is priced as a unit item.
Travel
Travel is charged by kilometre from Mbombela Brown Street.
Transport/travelling costs require prior approval and may be paid from Middelburg offices, including toll fees.
Fall protection
A site-specific Fall Protection Plan is required for moderate-risk work at height.
It must cover risk assessments, method statements, anchor points, access systems, inspection registers, certification of fall-arrest equipment, a competent Working at Height Supervisor, and emergency/rescue procedures.
It is measured as one complete item per site and includes implementation and monitoring.
The rate includes preparation, supervision and documentation; no separate payment for audits, inspections or review comments.
SHEQ documents
Annual medical surveillance and fitness certification for personnel working at heights.
PPE and site documents must meet applicable SANS standards, including safety helmets, eyewear, first-aid boxes and overalls.
Experience & Qualifications
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf
Key personnel
Contract Data requires key people details: name, job, responsibilities, qualifications, experience and CVs.
No minimum years of experience are stated.
Electrical qualifications
Electrical contractors must be registered with the Labour Department in the tendering contractor's name.
An Installation Electrician or Master Electrician must be employed full-time.
Trade and supervisory roles
Artisan Diesel Mechanic and Artisan Fitter must have trade tests.
Part-time Construction SHE Officer must be SACPCMP.
Mechanical Supervisor and Semi-Skilled Assistant rates are required.
Pricing Schedule
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf
Pricing format
NEC3 TSC3 Option A price list.
Items may be lump sums, rate x quantity, or time-based.
Rates are deemed to include all costs for normal working hours.
Labour rates
Hourly rates for Part-time Construction SHE Officer (SACPCMP), Mechanical Supervisor, Artisan Diesel Mechanic, Artisan Fitter, Semi-Skilled Assistant and General Worker.
Separate schedules for Monday-Friday normal hours, Saturday/after-hours and Sunday.
After-hours/Sunday payment requires special site instruction.
Plant and materials
10% mark-up on defined cost-plus fee.
Skyjack Mobile Boom Lift 20m day rate.
COC unit price.
Travel and approvals
Travel charged by kilometre from Mbombela Brown Street.
Transport/travelling requires prior approval; may be paid from Middelburg offices including tolls.
Work requires quotation and Task Order approval; call-out rate rules apply.
Financial Requirements
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf (unknown)
Contract pricing
NEC3 Term Service Contract, Option A: priced contract with a price list.
Prices may be lump sums, rates multiplied by quantities, or time-based items.
The price list is a pricing document only; service requirements are in the Service Information.
Direct fee percentage: 0%; subcontracted fee percentage: 0%.
Payment
Currency: South African Rand.
Assessment interval: last day of each month.
Payment period: four weeks.
Interest on late payment: Standard Bank prime rate.
Tax invoice must be submitted within one week of the payment certificate and must show Eskom VAT number 4740101508.
Price adjustment
Prices are fixed for the first 16 months.
Base date for indices: one month before tender closing date.
Adjustment proportions: 75% labour (SEIFSA Table C-3a), 10% transport (SEIFSA Table L-2(B)), 15% fixed.
Plant and materials
Equipment, materials and spares: 10% mark-up on defined cost-plus fee.
Insurance and liability
Contractor must provide insurance in Insurance Table A, including cover for loss/damage to Employer property, Plant and Materials, Equipment, third-party property, bodily injury/death, and employee liability.
Employer provides Insurance Table B policies.
Contractor's liability for indirect or consequential loss is limited to replacement value per incident.
Contractor's total liability is limited to the total of the Prices, excluding additional excluded matters.
Employer's liability for the Contractor's indirect or consequential loss is R0.00.
Employee death/bodily injury indemnity limit must be at least R500,000.
Compliance Requirements
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf (unknown)
Mandatory registrations and status
CIDB registration number must be provided on the Form of Offer.
B-BBEE minimum level: Level 2.
VAT registration and compliance with the Value Added Tax Act apply to South African companies.
Electrical contractors must be registered with the Labour Department as an Electrical Contractor in the tendering contractor's name.
An Installation Electrician or Master Electrician must be employed full-time.
Electrical work must be supported by a COC where applicable under the Electrical Installation Regulations.
B-BBEE changes
Any change in B-BBEE status must be notified to Eskom within 7 days.
Updated verification certificate and supporting documents must be submitted within 30 days.
A decreased B-BBEE status may lead to renegotiation or termination.
Joint ventures and assignment
Joint ventures/consortia are jointly and severally liable.
They must notify the Service Manager of an authorised key person within two weeks of the Contract Date.
Composition cannot change without Eskom's written consent.
Cession, delegation or assignment requires Eskom's written consent.
Other compliance
Contractor must comply with confidentiality obligations; images of the Affected Property require prior written consent.
Prohibited actions such as corruption, fraud, collusion, coercion and obstruction may lead to termination.
Asbestos work must comply with the Asbestos Regulations and Eskom Asbestos Standard 32-303.
Returnable form
C1.1 Form of Offer and Acceptance.
Health & Safety
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf
Health and safety
Contractor must take reasonable precautions to protect health and safety.
Eskom may appoint Contractor as Principal Contractor under Construction Regulations 2014.
Prices must include compliance with OHS Act, Construction Regulations and contract H&S rules.
Asbestos
Employer ensures ambient air meets asbestos OELs: 0.2 fibres/ml 4-hour TWA and 0.6 fibres/ml 10-minute TWA.
If asbestos is identified, risk assessment and control measures are required; workers may stop work until area is declared safe.
PPE and site safety
Overalls compliant with SANS 434.
Safety helmets compliant with SANS 1397.
Impact-resistant eyewear compliant with SANS 50166.
First-aid box compliant with SANS 10199-3.
Working at height
Site-specific Fall Protection Plan, risk assessments, method statements, anchor points, inspection registers, competent supervisor and rescue procedures.
Electrical safety
Electrical contractors must be registered with the Labour Department.
COC required for electrical work where applicable.
Environmental
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf
Environmental compliance
Contractor must comply with applicable environmental laws, regulations and contract procedures.
Subcontractors and personnel must also comply.
Asbestos management
Eskom manages asbestos and asbestos-containing materials under Asbestos Standard 32-303.
Removal and disposal must be done by a registered asbestos contractor instructed by Eskom and in line with South African legislation.
Contractual Terms
Source: NEC Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Lowveld Zone(1).docx 2026.pdf
Contract form
NEC3 Term Service Contract (TSC3), Option A, with secondary options X1, X2, X17, X18, X19 and Z1-Z15.
Law: South African law; language: English.
Insurance
Contractor provides Insurance Table A cover; Employer provides Insurance Table B cover.
Contractor must provide certificates of insurance on request.
Liability
Contractor's indirect/consequential loss liability is limited to replacement value per incident.
Contractor's total liability is limited to the Prices, excluding additional excluded matters.
Employer's liability for Contractor's indirect/consequential loss is R0.00.
Termination
Eskom may terminate for B-BBEE status decrease, prohibited actions, or business rescue order.
Confidentiality and images
Contractor must keep contract information confidential; images of the Affected Property require prior written consent and vest in Eskom.
Nuclear liability
Eskom is responsible for nuclear damage liabilities, except where caused by Contractor's unlawful intent or unauthorised presence at Koeberg.
Asbestos
Eskom manages asbestos and ensures ambient air meets prescribed limits.
OEL: 0.2 fibres/ml over 4 hours; short-term limit: 0.6 fibres/ml over 10 minutes.
Contractor may stop work and leave contaminated areas until declared safe.
Asbestos removal is by a registered asbestos contractor at Eskom's expense.
DocumentInvitation to Tender (ITT) .pdfReview complete
Description
Source: Invitation to Tender (ITT) .pdf
Eskom Holdings SOC Ltd invites tenders for core technical services covering mechanical building maintenance, performed on an as-and-when-required basis in the LimLanga Cluster, Mpumalanga, over 60 months.
Structure of the requirement
Two separate NEC3 Term Service Contracts (TSC) set out the scope of services and the resource requirements for each zone.
A tenderer signs the contract for the zone it bids for.
Zones available: Highveld Zone and Lowveld Zone.
A tenderer may bid for one or both zones, but each zone bid must carry its own full complement of minimum resources; resources may not be duplicated across zones.
Two service providers will be appointed for each zone.
Tender pack contents
Annexure A: Authorisation Form.
Annexure B: Acknowledgement Form.
Annexure C: Tenderer's Particulars.
Annexure D: Integrity Declaration, read with the Eskom Supplier Integrity Pact.
Annexure E: CPA Requirements for Local Goods/Services.
Annexure H: SBD 1 Invitation to Bid.
Annexure I: SBD 6.1 Preference Points Claim.
Annexure J: SBD 4 Bidder's Disclosure.
Appendix A: Tax Evaluation Questionnaire.
Appendix B1 and B2: NEC Term Service Contract.
Appendix C: Non-Disclosure Agreement.
Appendix D: Supplier Development, Localisation and Industrialisation requirements.
Appendix E: Technical evaluation criteria.
Appendix F1 and F2: Safety evaluation criteria.
Appendix G: Quality evaluation criteria.
Appendix H: Environmental evaluation criteria.
Pricing schedule or bill of quantities, in PDF and Excel.
Eskom Standard Conditions of Tender, for information only and not to be returned.
Not applicable to this tender: Annexure F (imported goods), Annexures G1 to G4 (SBD 6.2 local production and content), reverse e-auction documents, Contract Participation Goals, Contract Skills Development Goals.
Eskom Standard Conditions of Tender: www.eskom.co.za
Submission Guidelines
Source: Invitation to Tender (ITT) .pdf (RFP)
Submission method
Electronic only, via the Eskom e-tendering portal: https://etendering.eskom.co.za
No hard-copy submissions will be accepted.
Late tenders are rejected; the bidder carries the risk of uploading in time.
The portal submission status must show as complete.
If a tender is resubmitted, only the latest version is accepted and earlier versions become void.
File and packaging rules
All documents in PDF.
The price list must be supplied in PDF plus a duplicate in Excel.
Upload into the portal folders: Technical, Commercial, Financial and Other.
Maximum 500 MB per document; maximum 4 GB per total submission.
Zipped or compressed files are not accepted.
Returnables required at closing (a missing or unsigned item disqualifies)
Annexure A: Authorisation Form, with a certified board, members, partnership or trust resolution authorising the signatory.
Annexure B: Acknowledgement Form.
Annexure C: Tenderer's Particulars.
Annexure D: Integrity Pact Declaration, following the Eskom Supplier Integrity Pact.
Annexure E: CPA Requirements for Local Goods/Services, completed and signed.
Annexure H: SBD 1 Invitation to Bid, completed by all tenderers including foreign suppliers.
Annexure J: SBD 4 Bidder's Disclosure.
Tax Evaluation Questionnaire (Appendix A), confirming whether the entity is a personal service provider for PAYE.
Electronic PDF copy of the tender, with the price list in PDF and Excel.
E-tendering Help Manual acknowledgement form.
Joint ventures: JV or consortium agreement setting out rights, obligations and profit shares; confirmation the JV operates as a single business entity for the contract term; confirmation of one designated JV bank account independent of the individual partners.
Returnables scored but not disqualifying
Annexure I: SBD 6.1 Preference Points Claim. If omitted, the bid is not disqualified but scores zero on the 20 specific-goal points.
Not applicable to this tender
Annexure F (CPA for imported goods), Annexures G1 to G4 (SBD 6.2 local production and content), reverse e-auction forms.
Disqualification risks
Any disqualifiable returnable not completed, signed or uploaded by the closing time.
Failure to upload documents at all on the e-tendering system renders the tender non-responsive.
Tender signed by a person without authority.
Sharing of resources (tools, vehicles, certificates) with another contractor.
Evaluation Criteria
Source: Invitation to Tender (ITT) .pdf (RFP)
Evaluation runs in stages; a bid must clear each stage to reach the next.
Stage 1 — Basic compliance and mandatory requirements
Eligibility criteria met, electronic submission made, complete commercial, financial and technical information submitted, and all mandatory returnables lodged by the deadline.
Mandatory technical screening (pass/fail, no scoring): valid CEA (SA) registration as a Mechanical Contractor in the company name or a director's name; company organogram with names and ID numbers showing a Mechanical Supervisor, Boilermaker, Fitter and Diesel Mechanic (trade tested) and semi-skilled or assistant staff, supported by detailed CVs of key personnel.
Missing mandatory documentation results in disqualification without a request to remedy.
Stage 2 — Functionality (desktop evaluation)
Minimum qualifying score: 75% to proceed to Site Assessment and Verification.
Final functionality score rounded to the nearest whole number.
Weighting:
Training, accreditations and qualifications: 30%
Company relevant experience: 30%
Vehicles: 20%
Tools and equipment: 20%
Full technical criteria are set out in Appendix E. Bidders below the threshold are disqualified.
Stage 3 — Price and specific goals (80/20 preference point system)
Price: maximum 80 points, calculated on the evaluated price including VAT.
Specific goals (B-BBEE status level): maximum 20 points.
Price scoring formula: Ps = 80 x (1 - (Pt - Pmin)/Pmin), where Pt is the tender price and Pmin the lowest acceptable tender price.
Price adjustments applied before scoring: arithmetic errors corrected, contingencies excluded, acceptable variations and deviations adjusted, net present value comparison applied, unconditional discounts counted, conditional discounts disregarded for evaluation but applied at payment.
Total score rounded to two decimal places; the highest total wins.
Tie-breaking
Highest points for specific goals wins.
If still equal, the award is decided by drawing lots.
Appointment
Two service providers will be appointed for the Lowveld Zone and two for the Highveld Zone.
Post-evaluation contractual requirements
Assessed after ranking, not scored. The preferred bidder has 7 working days to remedy unmet contractual requirements.
If requirements cannot be met or mitigating factors are unacceptable, the award may pass to the second-ranked bidder.
Technical Specifications
Source: Invitation to Tender (ITT) .pdf (RFP)
Scope
Provision of core technical services covering mechanical building maintenance, delivered on an as-and-when-required basis.
Location: LimLanga Cluster, Mpumalanga.
Contract period: 60 months.
Contract form: NEC3 Term Service Contract (TSC). Two separate sets of TSC documents define the scope and resource requirements per zone.
Zones
Highveld Zone
Lowveld Zone
A tenderer may bid for either zone or both. A separate signed contract is required for each zone bid for.
Each zone bid must be supported by the full minimum resources for that zone. Resources may not be duplicated across zones.
Two service providers will be appointed per zone.
Personnel and resources
Organogram with names and ID numbers covering a Mechanical Supervisor, Boilermaker, Fitter and Diesel Mechanic (trade tested), plus semi-skilled or assistant staff.
Detailed CVs for key personnel showing skill level and related experience.
Vehicles and tools and equipment are evaluated as part of functionality.
Resources, including tools, vehicles and certificates, may not be shared between contractors.
Technical criteria
Detailed technical requirements are set out in Appendix E.
Safety requirements: Appendix F1 and F2.
Quality requirements: Appendix G.
Environmental requirements: Appendix H.
Supplier development, localisation and industrialisation requirements: Appendix D.
Scope of work is contained in the separately attached NEC Term Service Contract.
Experience & Qualifications
Source: Invitation to Tender (ITT) .pdf
Mandatory technical screening (pass/fail, no scoring)
Valid CEA (SA) registration as a Mechanical Contractor, by certificate or proof of application, in the company name or a director's name; the registration must be valid and not forged.
Company organogram with names and ID numbers showing the Mechanical Supervisor, Boilermaker, Fitter and Diesel Mechanic (trade tested), plus semi-skilled or assistant staff.
Detailed CVs for key personnel demonstrating skill level and related experience.
Failure to submit any mandatory item results in disqualification without a request to remedy.
Functionality scoring (minimum 75% to proceed)
Training, accreditations and qualifications: 30%
Company relevant experience: 30%
Vehicles: 20%
Tools and equipment: 20%
Full criteria are set out in Appendix E.
Resource rules
Each zone bid must be supported by the full minimum resources for that zone.
Resources may not be duplicated between zones.
Tools, vehicles and certificates may not be shared between contractors; doing so results in disqualification.
Pricing Schedule
Source: Invitation to Tender (ITT) .pdf
Pricing documents
Prices and rates are entered in the NEC3 Term Service Contract (TSC).
A separate pricing schedule or bill of quantities must be completed where it is not contained in the contract.
The price list must be uploaded in PDF with a duplicate in Excel.
Pricing basis
All prices inclusive of VAT.
Contingencies in any bill of quantities or activity schedule are excluded from evaluation.
Arithmetic errors are corrected before scoring.
Unconditional discounts are taken into account; conditional discounts are disregarded at evaluation and applied when payment is made.
Net present value comparison of adjusted tenders is applied where applicable.
Mandatory status
The NEC3 Term Service Contract with prices and rates, and the completed and signed CPA Requirements for Local Services form (Annexure E), are mandatory returnables; omission renders the tender non-responsive.
A completed pricing schedule is required if it is not already included in the NEC or other contract.
Financial Requirements
Source: Invitation to Tender (ITT) .pdf (RFP)
Pricing
Prices must be submitted inclusive of VAT.
Pricing is captured in the NEC3 Term Service Contract and in the pricing schedule or bill of quantities, which must be uploaded in PDF with an Excel duplicate.
Prices are corrected for arithmetic errors and evaluated excluding contingencies.
Unconditional discounts are taken into account for evaluation; conditional discounts are disregarded at evaluation but applied when payment is made.
Net present value comparison of adjusted tenders is applied where applicable.
Payment terms
Contracts below R50 000 000 including VAT: payment within 30 days of receipt of undisputed invoices.
Contracts above R50 000 000 including VAT: payment within 60 days of receipt of undisputed invoices.
Security
Provision of security for performance: not applicable.
Financial capacity
Audited financial statements for the previous 18 months, or for the last year where 18 months are not available, must be submitted as a contractual requirement.
Joint ventures and special purpose vehicles must submit audited statements for each participant.
Start-up enterprises formed within the last 12 months are exempt from submitting audited statements at bid stage but must provide first-year statements once available if awarded.
Financial analysis is compulsory as a contractual requirement for CIDB-related transactions from R30 000 excluding VAT.
Price negotiation
Eskom reserves the right to negotiate with preferred bidders where tendered prices are not market-related.
Compliance Requirements
Source: Invitation to Tender (ITT) .pdf (RFP)
Eligibility
The bidder, or any of its principals, must not be restricted from doing business with Eskom or any State-Owned Company.
No nationality of a country on an international sanctions list; this applies equally to proposed subcontractors and suppliers.
No conflict of interest, including common controlling partners or majority shareholders with another bidder.
Not restricted by National Treasury, not on the Tender Defaulters list, and not restricted by Eskom.
Only one tender per bidder, whether submitted alone or as a JV partner.
Joint ventures must state joint and several liability in the JV agreement.
A bidder may not subcontract 100% of the scope of work.
Subcontracting to a subsidiary must be declared in the tender.
Statutory and registration
Central Supplier Database registration with a tax-compliant CSD report.
Tax clearance certificate or SARS e-filing PIN where the bidder is not registered on CSD. Foreign suppliers with no South African footprint complete SBD 1 but need not prove tax compliance.
CEA (SA) registration as a Mechanical Contractor, by certificate or proof of application, in the company name or a director's name, valid and not forged.
CIDB contractor grading of 1ME or higher. Joint ventures: every member registered with the CIDB, the lead partner graded 1ME or higher, and the combined grading meeting the requirement.
COIDA: original certificate of good standing, or proof of application, from the Compensation Fund or a licensed compensation insurer (South African tenderers).
Designated employers must prove compliance with the Employment Equity Act, including proof of submission of the Employment Equity report to the Department of Labour (South African tenderers).
B-BBEE and preference points
Evidence to claim points: valid B-BBEE certificate from a SANAS-accredited verification agency, sworn affidavit, or CIPC B-BBEE certificate for EMEs.
Supporting documents: proof of ownership or shareholding, preferably CIPC documentation with the shareholding breakdown; certified ID copies of shareholders; proof of disability where claimed.
Trusts, consortia and joint ventures must submit a consolidated B-BBEE status level verification certificate.
Failure to submit B-BBEE evidence does not disqualify the bid but scores zero on the 20 specific-goal points.
Mandatory returnable forms
SBD 1 (Invitation to Bid): the bidder's offer and contact details, signed as the cover page.
SBD 4 (Bidder's Disclosure): discloses interests of directors and shareholders, including state employment and connections to the department.
SBD 6.1 (Preference Points Claim): claims B-BBEE points under the PPPFA.
Annexure A (Authorisation Form): confirms the named signatory is empowered to bind the bidder.
Annexure B (Acknowledgement Form), Annexure C (Tenderer's Particulars), Annexure D (Integrity Pact Declaration), Annexure E (CPA for Local Goods/Services).
Tax Evaluation Questionnaire: determines personal service provider status for PAYE.
Contractual requirements assessed before award
Safety requirements per Appendix F1 and F2, quality per Appendix G, environmental per Appendix H.
Audited financial statements as set out in the financial requirements.
Commercial statutory documents as stipulated.
The preferred bidder has 7 working days to remedy unmet contractual requirements.
Health & Safety
Source: Invitation to Tender (ITT) .pdf
Safety evaluation
Safety requirements are set out separately in Appendix F1 and F2 and form part of the contractual requirements assessed before award.
Coida
South African tenderers must submit an original certificate of good standing, or proof of application, issued by the Compensation Fund (COID) or a licensed compensation insurer.
Quality and environmental interfaces
Quality requirements: Appendix G.
Environmental requirements: Appendix H.
These are assessed alongside safety as contractual requirements, not as scored evaluation criteria.
Environmental
Source: Invitation to Tender (ITT) .pdf
Environmental requirements are set out separately in Appendix H and are assessed as a contractual requirement before contract award, alongside the safety and quality requirements. No environmental thresholds or standards are stated in the tender data itself.
Contractual Terms
Source: Invitation to Tender (ITT) .pdf
Contract form
NEC3 Term Service Contract (TSC), with two sets of contract documents covering the Highveld and Lowveld zones.
The tender is for the whole of the contract; Eskom reserves the right to accept or reject any tender.
Duration
60 months.
Payment
Contracts below R50 000 000 including VAT: payment within 30 days of receipt of undisputed invoices.
Contracts above R50 000 000 including VAT: payment within 60 days of receipt of undisputed invoices.
Performance security
Provision of security for performance is not applicable.
Subcontracting
Subcontracting 100% of the scope of work is not permitted.
Main contractors are discouraged from subcontracting to their own subsidiaries, which may be treated as self-subcontracting or fronting; any such subcontract must be declared in the tender.
Price negotiation
Eskom may negotiate with preferred bidders where tendered prices are not market-related.
Contractual requirements before award
Must be met after evaluation and ranking, not scored.
The preferred bidder has 7 working days to resubmit unmet contractual requirements.
Failure to meet them by the deadline may render the bid non-responsive and the award may pass to the second-ranked bidder.
Eligibility conditions with contractual effect
No restriction on doing business with Eskom or State-Owned Companies.
No nationality of a sanctioned country, applied also to subcontractors and suppliers.
No conflict of interest between bidders.
Joint ventures must accept joint and several liability.
Only one tender per bidder.
Section
Source: Invitation to Tender (ITT) .pdf
Preference point system: 80/20.
Price (80 points)
Scored on the evaluated price including VAT.
Formula: Ps = 80 x (1 - (Pt - Pmin)/Pmin), where Pt is the price under consideration and Pmin the lowest acceptable price.
Arithmetic errors corrected, contingencies excluded, acceptable variations and deviations adjusted, net present value comparison applied where relevant.
Unconditional discounts count towards evaluation; conditional discounts do not, but are applied at payment.
Specific goals (20 points)
Awarded against B-BBEE status level of contributor.
SDL&I default penalty: 2.5% of the invoice amount for failure to meet SDL&I obligations.
SDL&I contract-value penalty: 2.5% of contract value for failure to meet SDL&I obligations.
Retention: Eskom retains 2.5% of every invoice, excluding VAT, as security for SDL&I obligations.
Release of retention: only after Eskom receives SDL&I progress reports, the contractor fulfils all SDL&I obligations, and the SDL&I Department approves a compliance report.
B-BBEE evidence: valid SANAS-accredited certificate, sworn affidavit or CIPC affidavit.
Supporting documents: CIPC ownership/shareholding breakdown, certified shareholder IDs, disability proof where applicable, consolidated certificate for trusts/consortia/JVs.
Revenue bands: up to R10 million EME may use sworn affidavit; up to R50 million QSE must meet applicable QSE scorecard unless at least 51% black-owned, then sworn affidavit may be used; above R50 million requires valid B-BBEE certificate.
Award condition: valid B-BBEE certificate or sworn affidavit is required for contract award.
Improvement plan: submit B-BBEE improvement or retention plan within 30 days of contract signature.
Level 1: show how status will be maintained; Level 2 or 3: show improvement or maintenance over contract.
Level 4 at award: reach Level 3 by end of year 1 and improve thereafter.
Level 5 to 8 or non-compliant at award: reach Level 4 by end of year 1 and improve at least one level each year from year 2.
Affidavit validity: include deponent identity, designation, enterprise details, ownership percentages, revenue, financial year-end, B-BBEE level and empowering supplier status; deponent and Commissioner of Oaths sign same date; Commissioner must be independent.
Local content: 100% local procurement content.
SDL&I reporting: quarterly reports using Eskom template; corrective measures required if obligations are not met.
Section
Source: SDL&I Strategy Setting Bidders 2026.pdf
Preference scoring
80/20 preference points system applies.
Maximum 20 points for specific goal/B-BBEE status.
Specific goal points are added to price points; total is rounded to two decimals.
Highest scoring bid wins, subject to PPPFA section 2(1)(f).
Failure to submit preference documents does not disqualify the bid, but limits scoring to 80 price points and 0 specific goal points.
DocumentNEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdfReview complete
Description
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf
General scope
Mechanical building maintenance services for Property Management, Mpumalanga Operating Unit, Highveld Zone, required when needed over 60 months.
Contractor provides all labour, supervision, tools, equipment, transport, consumables and other resources for ad hoc work.
Normal working hours are Monday to Friday, 07:00 to 16:00; after-hours work requires written instruction or approval.
Priced team includes a part-time Construction SHE Officer (SACPCMP), Mechanical Supervisor, Artisan Diesel Mechanic, Artisan Fitter, semi-skilled assistant and general worker.
Plant and materials are charged cost-plus with a 10% mark-up; a 20 m Skyjack boom lift and COC issuing are priced.
A site-specific fall protection plan, annual medical surveillance, travel from Middelburg, PPE and SHEQ documentation are required.
Electrical work requires a registered electrical contractor and COC.
Contact Information
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf (unknown)
Employer
Name: Eskom Holdings SOC Ltd
Address: Megawatt Park, Maxwell Drive, Sandton, Johannesburg
Telephone: 011 800 8111
Service Manager: To be confirmed
Document source
Name: Engineering Contract Strategies
Telephone: 011 803 3008
Fax: 086 539 1902
Website: www.ecs.co.za
Service area
Property Management, Mpumalanga Operating Unit, Highveld Zone
Travel origin: 2 Meter Street, Middelburg Industrial, 1050
Submission Guidelines
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf (unknown)
Returnable documents
C1.1 Form of Offer and Acceptance: signed by a duly authorised representative; the tenderer's CIDB registration number must be inserted.
C1.2b Contractor data: contractor details, key people, price list location and tendered total.
Priced Price List: Option A rates, lump sums and expected quantities.
Schedule of Deviations: required only where the tenderer proposes deviations.
Submission notes
Alternative tenders must be submitted on a separate Form of Offer and Acceptance.
Technical Specifications
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf (unknown)
Service
Mechanical building maintenance services for Property Management, Mpumalanga Operating Unit, Highveld Zone.
Services are required when needed over a 60-month period.
Contractor must supply labour, supervision, tools, equipment, transport, consumables and other resources.
Working hours
Normal working hours are Monday to Friday, 07:00 to 16:00.
Saturday, Sunday and public holiday work requires written instruction or approval and is paid under BCEA and applicable labour rules.
Call-out work started during normal hours and completed after hours is paid at normal-hour rates.
Call-out work started after normal hours is paid at after-hours rates.
Priced team
Part-time Construction SHE Officer (SACPCMP).
Mechanical Supervisor.
Artisan Diesel Mechanic with trade test.
Artisan Fitter with trade test.
Semi-skilled assistant.
General worker or labourer.
Separate hourly rates apply for weekday normal hours, Saturday or after-hours work, and Sunday work.
Plant and materials
Equipment, material and spares are charged on a defined cost-plus basis with a 10% mark-up.
Skyjack mobile boom lift, 20 m, is priced as a day rate.
Issuing a certificate of compliance is priced as a unit item.
Working at height
A site-specific fall protection plan is required for moderate-risk environments.
The fall protection plan is measured as one complete item per site.
The plan must cover working-at-height risk assessments, task-based method statements, anchor points, access systems, inspection registers, fall arrest equipment certification, a competent Working at Height Supervisor, and emergency/rescue procedures.
Fall arrest equipment includes high-quality fall protection safety harnesses with multiple attachment points and double lanyard harnesses.
Annual medical surveillance and fitness certification are required for personnel working at heights.
No separate payment is allowed for audits, inspections or employer review comments.
Travel
Travel is charged from 2 Meter Street, Middelburg Industrial, 1050.
Toll fees require prior approval.
Labour and transport must be sourced as close as possible to the affected site.
PPE and site documents
Overalls must comply with SANS 434.
Safety helmets must comply with SANS 1397.
Impact-resistant eyewear must comply with SANS 50166.
A fully equipped first aid box must comply with SANS 10199-3.
A SHEQ file is required per site and per task order in accordance with Eskom Distribution SHEQ requirements.
Electrical work
Electrical contractors must be registered with the Labour Department as electrical contractors.
An Installation Electrician or Master Electrician must be employed full time.
Electrical work must be supported by a COC under the OHS Act Electrical Installation Regulations and approved by the Eskom Dx Facilities Official.
Prior written approval from the Eskom Dx Facilities Official is required before work starts.
Experience & Qualifications
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf
Experience and key personnel
Contractor data must identify key people, their roles, responsibilities, qualifications and experience.
CVs and further key-person data must be provided.
Priced roles include part-time Construction SHE Officer (SACPCMP), Mechanical Supervisor, Artisan Diesel Mechanic with trade test, Artisan Fitter with trade test, semi-skilled assistant and general worker.
Electrical contractors must be registered with the Labour Department.
An Installation Electrician or Master Electrician must be employed full time.
Pricing Schedule
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf
Pricing schedule
Option A price list may contain lump sums, rates and expected quantities.
Rates must include all costs for normal working hours, overheads, profit, statutory obligations and labour compliance.
Separate hourly rates are required for weekday normal hours, Saturday or after-hours work, and Sunday work.
Each listed labour role has an expected quantity of 1.
Plant and materials are charged with a 10% mark-up on defined cost-plus.
Skyjack 20 m boom lift is priced as a day rate.
COC issuing is priced as a unit item.
Travel is charged from Middelburg; toll fees require prior approval.
Rate approvals must be authorised by the Eskom Dx Facilities Official before work is carried out.
Work must proceed only after quotation, task order approval and written instruction, except in emergencies.
Payment is assessed monthly and paid within four weeks against a correct tax invoice.
Financial Requirements
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf (unknown)
Pricing basis
NEC3 TSC3 Option A priced contract with a price list.
Rates are deemed to include overheads, profit, statutory obligations and compliance with labour legislation.
Supplier rate includes contract management and SHEQ compliance.
Certain labour items are based on gazetted labour rates.
Prices are fixed for the first 16 months from the contract start date and may escalate thereafter.
Base date for indices: one month before tender closing date.
Price adjustment proportions: 75% labour linked to SEIFSA Table C-3a, 10% transport linked to SEIFSA Table L-2(B), and 15% fixed.
Payment
Assessment interval: last day of each month.
Payment period: four weeks.
Currency: South African Rand.
Interest on late payment: Standard Bank prime rate.
Tax invoice must be submitted within one week of the payment certificate and must show the employer's VAT number 4740101508.
Plant, materials and travel
Equipment, material and spares: 10% mark-up on defined cost-plus.
Travel is charged from Middelburg; toll fees require prior approval.
Insurance and guarantees
Contractor insurance under Table A must remain in force from the starting date until completion or termination.
Minimum common-law indemnity for death of or bodily injury to employees: R500,000.
Other contractor insurance covers replacement cost or the amount required by applicable law.
Contractor must cover applicable policy deductibles where required.
Employer provides insurances listed in Insurance Table B.
After the agreement comes into effect, the contractor must deliver securities, bonds, guarantees and proof of insurance.
Compliance Requirements
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf (unknown)
Registration and status
CIDB registration number must be entered on the Form of Offer and Acceptance.
Minimum B-BBEE level: Level 2.
Any change in B-BBEE status must be notified within 7 days.
Updated B-BBEE verification certificate and supporting documents must be submitted within 30 days of notification.
A decrease in B-BBEE status may lead to renegotiation or termination.
Tax and statutory compliance
Contractor must comply with the VAT Act and include the employer's VAT number on invoices.
Contractor must comply with the OHS Act, Construction Regulations 2014, Compensation for Occupational Injuries and Diseases Act, and applicable labour legislation.
Electrical contractors must be registered with the Labour Department.
Electrical work requires a COC approved by the Eskom Dx Facilities Official.
Personnel
The priced team includes a part-time Construction SHE Officer (SACPCMP).
Artisan roles require trade tests for diesel mechanic and fitter.
Key people details, qualifications, experience and CVs must be provided.
Conduct and contract obligations
Prohibited actions include coercive, collusive, corrupt, fraudulent and obstructive conduct.
Confidentiality obligations apply, and taking images of the affected property requires prior written consent.
Joint venture or consortium members are jointly and severally liable; changes to composition require employer consent.
Cession, delegation or assignment requires written employer consent.
If asbestos is encountered, personnel may stop work and leave the area until it is declared safe.
Health & Safety
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf
Health and safety
Contractor must take reasonable precautions to maintain health and safety during the service.
The employer may appoint the contractor as Principal Contractor under the Construction Regulations 2014.
Prices must include sufficient allowance for Construction Regulations, health and safety laws, and contract safety procedures.
Contractor must ensure subcontractors, employees and others under its control comply.
A site-specific fall protection plan is required, including risk assessments, method statements, anchor point management, equipment inspection and certification, a competent Working at Height Supervisor, and emergency/rescue procedures.
Annual medical surveillance and fitness certification are required for personnel working at heights.
PPE must comply with SANS 434, SANS 1397, SANS 50166 and SANS 10199-3.
A SHEQ file is required per site and per task order.
Electrical work requires a registered electrical contractor and COC.
If asbestos is identified, personnel may stop work and leave the contaminated area until it is declared safe; removal and disposal must be by a registered asbestos contractor instructed by the employer.
Environmental
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf
Environmental
Contractor must comply with applicable environmental laws, regulations, rules, guidelines and procedures.
Subcontractors, employees and others under the contractor's control must also comply.
Asbestos and asbestos-containing material must be managed under the employer's asbestos standard and the Asbestos Regulations.
If asbestos is encountered, a risk assessment, control measures and air monitoring may be required before work continues.
Removal and disposal of asbestos, asbestos-containing materials and waste must be performed by a registered asbestos contractor instructed by the employer.
Contractual Terms
Source: NEC-Mechanical building maintenance services to Eskom Distribution Property Management facilities at MOU Highveld Zone(1).docx 2026.pdf
Contract form
NEC3 Term Service Contract (TSC3), Option A priced contract with price list.
Main options include W1 dispute resolution, X1 price adjustment for inflation, X2 changes in law, X17 low service damages, X18 limitation of liability, X19 task order, and Z additional conditions.
Dispute resolution uses an ICE-SA adjudicator, with arbitration under Association of Arbitrators (Southern Africa) rules if needed.
Low service damages apply according to the service level table in the Service Information.
Service period: 60 months; starting date to be advised.
Governing law: South African law; contract language: English; reply period: one week.
Contractor's first plan is due within one week of the Contract Date.
Task Order programme is due within two days of receiving a Task Order.
Compensation events must be notified within eight weeks of becoming aware.
Contractor must prepare monthly forecasts of the final total of the Prices.
Payment, tax invoicing and interest follow the contract data.
Insurance, liability caps, exclusions and indemnities apply as set out in the contract data and insurance tables.
Employer liability for indirect or consequential loss is limited to R0.00.
End of liability date: one month after the end of the service period.
Termination may follow B-BBEE status decrease, prohibited action, business rescue, or other specified events.
Confidentiality, ethics, asbestos, nuclear liability and health/safety obligations apply.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Prevention and Combating of Corrupt Activities Act (PRECCA)
Act 12 of 2004
high
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Public Procurement Act, 2024 (PPA)
Act 28 of 2024
high
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Promotion of Access to Information Act (PAIA)
Act 2 of 2000
medium
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Promotion of Administrative Justice Act (PAJA)
Act 3 of 2000
medium
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
LimLanga cluster- Mpumalanga - Mpumalanga areas Limpopo areas - Mpumalanga areas Limpopo areas - 0699
Document-Backed
Recently Synced
Source Snapshot Available
AI Enhanced
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
9
Last checked
16 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.