ESKOM requires the supply and delivery of ambient air quality monitoring equipment for the acacia power station monitoring station in the western cape. Bidders must comply with eskom's supplier quality management specification (qm 58), which mandates a valid iso 9001 certification (or equivalent qms standard) and submission of category-specific quality documentation (category 1–4) including a signed form a, contract quality plan, and quality control plan/inspection and test plan. Sub-suppliers performing design, manufacture, testing, installation or commissioning must meet the same qms requirements. The bid closes on 3 december 2026 at 08:00; submission details are in the main tender pack.
Key Requirements
ISO 9001 certification: valid certificate from an accredited body required unless the nominated quality category expressly excludes it; applies equally to manufacturing sub-suppliers.
Form A: must be completed, signed and returned with the bid to accept Eskom quality requirements and ISO 9001.
Quality category returnables: submit all documents for the single nominated category (1, 2, 3 or 4) as listed in Eskom's List of Tender Returnable (240-12248652).
Sub-supplier QMS: any sub-supplier involved in design, manufacture, maintenance, testing, storage, delivery, installation, commissioning or project management must meet the same ISO 9001-based QMS requirements.
Quality plans: a Contract Quality Plan (per ISO 10005) and a Quality Control Plan/Inspection and Test Plan covering contract review through handover are required.
Evaluation: quality assessed against the nominated category using Eskom's Tender Evaluation Scorecard (240-168873697) and CIDB Best Practice Guideline A4; no minimum qualifying score set in the quality specification.
Closing date: 3 December 2026 at 08:00; confirm submission method, address and number of copies in the main tender pack.
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
Document240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdfReview complete
Description
Important Dates
16 Nov
2026
PUBLICATION
Tender Published
Tender was published
03 Dec
2026
DEADLINE
Closing Date
Tender closing date
Procurement Rules & Compliance ContextThis tender may be governed by South African public procurement rules covering fairness, transparency, preferential procurement, anti-corruption, administrative justice and access to information.
7 rules
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
Core procurement rules
These rules commonly apply to South African public-sector procurement.
7
Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
high
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Constitution of the Republic of South Africa, 1996 – Section 217
Act 108 of 1996 (s217)
high
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
240-12248652_List of Tender Returnables_Cat 3_ Rev 7.xlsx
Supply and delivery of ambient air quality monitoring equipment for the ambient air quality monitoring station at Acacia Power Station, for Eskom in the Western Cape. Bids close on 3 December 2026 at 10:00. Quality documentation submitted with the bid is scored on a weighted five-section scorecard.
Eskom requires the supply and delivery of ambient air quality monitoring equipment and associated systems for its Acacia and Gourikwa Power Stations, including particulate monitors, gas analysers, meteorological sensors, data loggers, calibration equipment, power backup systems, and signal boosters. The contract is phased, with Acacia deliveries in the current financial year and Gourikwa in the subsequent year subject to funding approval. Installation and commissioning are excluded and will be undertaken by Eskom RT&D.
Supply and delivery of ambient air quality monitoring equipment for the ambient air quality monitoring station at Acacia Power Station, for Eskom in the Western Cape. The contract is placed on Eskom's General Conditions of Purchase, which govern price and payment, delivery, acceptance, risk, ownership, warranty and breach.
Supply and delivery of ambient air quality monitoring equipment for the ambient air quality monitoring station at Acacia Power Station, procured by Eskom Holdings SOC Ltd under tender number E3812GXPOU.
Supply and delivery of ambient air quality monitoring equipment for the ambient air quality monitoring station at Acacia Power Station in the Western Cape, for Eskom. Bidders must accept Eskom's supplier quality requirements under specification 240-105658000 and the ISO 9001 standard, with the Category 3 pre-contract quality regime applying to the contract.
240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf
Eskom requires supply and delivery of ambient air quality monitoring equipment for the Acacia Power Station. The attached Supplier Quality Management Specification (QM 58, document 240-105658000 Revision 4) sets mandatory quality management system requirements for bidders, including ISO 9001 certification, quality plans, inspection and test plans, sub-supplier controls, and Eskom audit rights.
Supply and delivery of 16 types of ambient air quality monitoring equipment for the Acacia Power Station monitoring station in the Western Cape, including a PM2.5 monitor, gas analyzers (SO2, chemiluminescence, ozone), signal booster, data logger, antenna, precipitation gauge, radiation sensor, altimeter, hygrothermometer, anemometer, instrument mast, zero air and dilution calibrators, and an uninterruptible power supply.
Win Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Similar Tenders
Matched by category & region
Supplier Readiness Hub
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
BIDDERS LIST - CALIBRATION, SERVICE AND AD HOC MAINTENANCE OF CHEMICAL SERVICES LABORATORY EQUIPMENT FOR A PERIOD OF FIVE (5) YEARS AT LETHABO POWER STATION
Supplies: GeneralFind supplies: general tenders and contract opportunities in South Africa. Browse active government procurement opportunities updated daily.
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf
Eskom Supplier Quality Management Specification (identifier 240-105658000, reference QM 58), Revision 4, 30 pages, next review May 2030.
Sets the minimum quality requirements for all current and prospective Eskom suppliers and sub-suppliers.
Governs supplier evaluation, selection, registration, assessment, performance monitoring and auditing.
Applies across all Eskom Holdings divisions and subsidiaries and forms part of every Eskom RFI, RFQ and RFP for products and services.
Requires suppliers to establish, run, maintain and continually improve a QMS based on ISO 9001.
Document control:
Compiled by Sipho A Sambo (Middle Manager, Supplier Quality Management, acting).
Supported by Bathusi Montwedi (Senior Manager, Procurement and Supply Chain Management, acting).
Authorised by Gerhard Van Der Walt (General Manager, Procurement and Supply Chain Management) on 1 July 2026.
Submission Guidelines
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf (unknown)
Returnable quality documents (submit with the bid):
Form A (Tender and Contract Quality Requirements for QM 58 and ISO 9001): the supplier completes, signs and returns it to accept the Eskom quality requirements.
Quality evidence for the single category nominated in Form A (Category 1, 2, 3 or 4).
The exact returnables are drawn from Eskom's List of Tender Returnable (240-12248652); only one quality category applies per procurement.
Submission logistics:
Submission channel, address, number of copies and closing time are not set by the quality requirements — confirm them in the main tender pack.
Evaluation Criteria
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf (unknown)
Quality evaluation:
Bids are assessed on quality against the single category (1, 2, 3 or 4) nominated in Form A.
Quality is evaluated in line with CIDB Best Practice Guideline A4 (CIDB 1004).
A valid ISO 9001 certificate (or applicable QMS standard) from an accredited body is required unless the nominated category expressly excludes it.
No price/functionality split, 80/20 or 90/10 preference system, or minimum qualifying score is set by the quality requirements — confirm these in the main tender pack.
Technical Specifications
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf (unknown)
Scope:
The equipment scope, quantities and delivery point for the Acacia Power Station ambient air quality monitoring station are set in the main tender pack; the quality requirements govern how the supply is quality-managed.
The supplier and its sub-suppliers must operate a documented QMS conforming to ISO 9001 across all in-scope activities (design, manufacture, testing, storage, delivery, installation, commissioning, project management).
Applicable standards:
Normative: ISO 9001 (QMS requirements); ISO 10005 (guidelines for quality plans).
Informative: ISO 9000, ISO 10006, ISO 9004, SANS 10845-1 (construction procurement), CIDB 1004 (evaluating quality in tenders), Eskom SHEQ Policy 32-727.
Required quality plans:
Contract/project quality plan (CQP) to ISO 10005.
Quality control plan / inspection and test plan (QCP/ITP) spanning contract review through to handover.
Methodology
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf
Preservation programme methodology:
Develop a documented preservation work plan and evaluate the performance of all parties providing transport, handling or storage.
Oversee preservation plan preparation and execution at every work location.
Maintain a records process (generation, upkeep and Eskom access) in line with Eskom information-management requirements.
Identify all physical assets needing pre-operation preservation — bulk and consumable materials, equipment, systems, components and other procured goods not yet in service.
Communicate preservation requirements clearly to sub-suppliers where equipment or material management is delegated.
Monitor compliance from the engineering instruction through procurement until goods are incorporated into an operating system.
Address temporary, long-term and in-transit preservation, including protection from atmosphere, sunlight, temperature, dust, humidity, salt spray and corrosion, plus coating, covering and fastener maintenance.
Quality Management
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf
Quality management system:
The supplier and its sub-suppliers must develop, implement, maintain and improve a documented QMS conforming to ISO 9001 (latest revision), evidenced by a valid accredited certificate unless the category excludes it.
The QMS must cover documented information such as a quality manual, procedures, work instructions and method statements.
Any change to the QMS or to key staff that affects quality must be notified to Eskom before implementation.
Contract quality plan (CQP):
Required to ISO 10005 where the category or evaluation criteria call for it; submit before the work kick-off or pre-fabrication meeting, whichever is earlier.
Must define records management (material tests, positive material identification, certification), inspection access, the final manufacturing data book before shipment, and roles and communication channels.
Welding and other special processes require qualified welders (WQR/WPS/PQR) and certified personnel, with records maintained.
Quality control plan / inspection and test plan (QCP/ITP):
Must sequence every quality-control activity from contract review through materials verification, manufacture, testing, commissioning and handover.
Reviewed and accepted by Eskom or its inspection agency before work starts; later changes need Eskom agreement.
Once signed, ITPs and QCPs become contract addenda.
Eskom may set hold and witness points, appoint resident inspectors or an inspection agency/AIA, and audit the work; the supplier must provide inspector workspace at no cost.
Category 1 returnables (example):
Form A; valid ISO 9001 certificate; latest internal and external audit reports with corrective actions; documented roles, responsibilities and authorities; a draft CQP to ISO 10005; a sample ITP/QCP; documented control of externally provided processes; and management review records.
Category 2 adds objective QMS evidence:
Quality manual, quality policy, quality objectives, control of documented information, internal audit procedure, control of nonconforming outputs, and a nonconformity and corrective-action procedure.
Compliance Requirements
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf (unknown)
Quality compliance:
Valid ISO 9001 certification (or an applicable QMS standard, latest revision) from an accredited certification body — mandatory unless the nominated category expressly excludes it, and applies equally to any manufacturing third party.
Form A completed and signed to commit to the Eskom quality requirements and ISO 9001.
Quality documentation for the nominated category (1 to 4) submitted as returnables.
Sub-suppliers performing design, manufacture, maintenance, testing, storage, delivery, installation, commissioning or project management must meet the same QMS requirements.
Not covered by the quality requirements:
CSD registration, SARS tax compliance status, B-BBEE level, CIPC registration and CIDB grading are not specified — confirm these in the main tender pack.
Health & Safety
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf
Cites Eskom's Safety, Health, Environment and Quality (SHEQ) Policy (32-727) and IAEA Safety Standard GS-R-3.1 among its informative references, but sets no occupational health and safety requirements of its own.
Contractual Terms
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf
The supplier must run a preservation management programme covering goods from transfer of responsibility, through storage and transit, to final delivery, installation or active use.
Storage and control must follow manufacturer recommendations, specifications and project-specific requirements.
Special precautions apply to valves, electrical motors and components, mechanical and rotating equipment, piping, fittings, instrumentation, flange faces, gaskets, coatings and insulation — including periodic shaft rotation, engine turnover and lubrication.
Preservation requirements must be documented in purchase orders, work authorisations and all supplier-to-sub-supplier communications.
Sub-supplier preservation responsibilities must be clearly assigned, with ready access to records, equipment, tools and services.
Eskom has free and unrestricted access to all preservation records for inspection and audit.
Section
Source: 240-105658000 SUPPLIER QUALITY MANAGEMENT SPEC REV4 FINAL 2026.pdf
Quality selection framework:
Eskom's quality representative selects the applicable category (1, 2, 3 or 4) using the QM 58 Selection Criteria guideline (240-125473040) and records it in Form A.
Only one category applies per procurement.
Quality is scored using the Tender Evaluation Scorecard (240-168873697), consistent with CIDB 1004 Guideline A4 for evaluating quality in tender submissions.
ISO 9001 conformity underpins the quality score; suppliers must show a developed, implemented and maintained QMS.
No numeric weighting or pass mark is set by the quality requirements.
Document240-68099512 Form A_Cat 3_ Rev 9.docxReview complete
Description
Source: 240-68099512 Form A_Cat 3_ Rev 9.docx
Bidder must sign the Eskom quality acknowledgement form, confirming acceptance of specification 240-105658000 and ISO 9001.
Submission Guidelines
Source: 240-68099512 Form A_Cat 3_ Rev 9.docx (unknown)
Returnable quality form
Completed and signed Eskom Supplier Quality Requirements acknowledgement form, confirming acceptance of specification 240-105658000 and ISO 9001.
The form must record the bidder's quality representative details.
Evaluation Criteria
Source: 240-68099512 Form A_Cat 3_ Rev 9.docx (unknown)
Quality compliance
Bidder must accept Eskom Supplier Quality Requirements specification 240-105658000 and ISO 9001.
Only pre-contract award quality Category 3 may be selected; no other category applies.
Bidder must provide a quality representative with name, designation, date and signature.
Post-award quality obligations
Contract execution and supplier quality performance monitoring apply.
Eskom rights of access, information, preservation, quality audits, nonconformity management and special processes apply.
All listed ISO 9001 clauses and quality principles are marked applicable.
Technical Specifications
Source: 240-68099512 Form A_Cat 3_ Rev 9.docx (unknown)
Procurement scope
Supply and delivery of ambient air quality monitoring equipment for the ambient air quality monitoring station at Acacia Power Station.
Applicable quality framework
Eskom Supplier Quality Requirements specification 240-105658000 and ISO 9001.
Pre-contract award quality Category 3.
Post-contract supplier quality performance monitoring, Eskom access and information rights, preservation, quality audits, nonconformity management and special processes.
Compliance Requirements
Source: 240-68099512 Form A_Cat 3_ Rev 9.docx (unknown)
Required quality form
Signed Eskom Supplier Quality Requirements acknowledgement form, accepting specification 240-105658000 and ISO 9001.
Only Category 3 pre-contract award quality requirements may be selected.
Bidder's quality representative details must be provided.
Document240-12248652_List of Tender Returnables_Cat 3_ Rev 7.xlsxReview complete
Submission Guidelines
Source: 240-12248652_List of Tender Returnables_Cat 3_ Rev 7.xlsx (unknown)
Returnable documents
Form A, completed and signed.
Evidence of an implemented quality management system.
Internal management system audit report with nonconformity, correction and corrective action reports.
Draft Contract Quality Plan and Inspection and Test Plan for the scope of work.
Information defining roles, responsibilities and authorities.
Submission format
The completed Category 3 returnables schedule must be signed and provided as a PDF, or signed and locked before it is sent to the buyer.
Evaluation Criteria
Source: 240-12248652_List of Tender Returnables_Cat 3_ Rev 7.xlsx (unknown)
Quality documentation evaluation
Quality documentation is assessed before further scoring.
Weighting: Section A 25%; Section B 25%; Section C 20%; Section D 20%; Section E 10%.
Category 3 applies.
Section A: quality management system requirements under ISO 9001:2015. Category 3 uses the QMS-in-operation option. Evidence includes a QMS manual or method statement defining the QMS and its scope; quality policy approved by top management; quality objectives approved by top management; control of documented information; control of nonconforming outputs; nonconformity and corrective action records; and internal audit documented information.
Section B: evidence of QMS in operation. Required evidence includes documented roles, responsibilities and authorities, supported by an organisation chart and responsibility matrix covering the quality management function; documented control of externally provided processes, products and services, including evaluation, selection, monitoring and re-evaluation criteria; and an internal management system audit report with nonconformity, correction and corrective action records.
Section C: draft Contract Quality Plan specific to the scope of work, prepared with reference to ISO 10005 and supplier quality requirements 240-105658000 and 240-109253698.
Section D: Quality Control Plan, checklist or Inspection and Test Plan specific to the scope of work, prepared with reference to ISO 10005 and supplier quality requirement 240-105658000 or 240-109253302.
Section E: Form A completed and signed, plus any customer-specific requirements or other standards stated in the scope of work or specification.
Evaluation may include a first desktop evaluation and a second desktop evaluation for clarifications.
Technical Specifications
Source: 240-12248652_List of Tender Returnables_Cat 3_ Rev 7.xlsx (unknown)
Procurement scope
The work is to provide and deliver ambient air quality monitoring equipment to the monitoring station at Acacia Power Station.
Compliance Requirements
Source: 240-12248652_List of Tender Returnables_Cat 3_ Rev 7.xlsx (unknown)
Mandatory quality compliance
Form A must be completed and signed.
The quality management system must align with ISO 9001:2015 requirements and be implemented.
Documented roles, responsibilities and authorities must be provided.
Control of externally provided processes, products and services must be documented.
Nonconformity, correction and corrective action records must be available.
A draft Contract Quality Plan and a Quality Control Plan or Inspection and Test Plan specific to the scope must be submitted.
Goods must reach the delivery point named in the order on or before the agreed date; late delivery or late completion may attract the penalty set in the agreement.
Each consignment or package must be marked on the outside with the supplier's name and the full destination details, and must carry a packing note listing its contents.
An advice note must be sent to the delivery address stating the mode of transport, weight or volume as applicable, and the dispatch point and date.
A detailed tax invoice must be issued after delivery of the goods or completion of the works/services.
The agreement number must appear on all correspondence relating to the agreement.
The bid must state whether delivery cost is included in the price; if it is silent, delivery is treated as included.
Acceptance
Eskom may inspect and test the goods, works or services and the workmanship at any stage.
If Eskom raises no acceptance notice, the goods, works or services are deemed accepted.
Eskom may inspect and test the goods, works or services and the workmanship at any stage.
Acceptance is deemed where Eskom does not issue a notice of acceptance.
Rejection and rework
Eskom may reject any part of the goods by written notice stating the reason and whether replacement or rework is required.
Rejected goods may be returned at the supplier's risk and cost.
The supplier must refund money paid for goods not replaced in time, plus Eskom's costs of returning the rejected goods and sourcing replacements elsewhere.
For works or services, the supplier must correct non-conformances and defects flagged by Eskom; if it delays, Eskom may appoint a third party to correct them at the supplier's cost.
The agreement comprises the order documents, these general conditions, and any specifications, schedules and drawings Eskom approves.
The conditions bind the supplier unless the supplier expressly rejects them; no Eskom employee or agent may vary them orally.
Supplier terms do not override these conditions unless Eskom agrees in writing.
The agreement is the entire contract; any addition or change must be in writing and signed by both parties.
Risk and ownership
Risk passes to Eskom on proof of delivery to the correct destination and acceptance of the goods, works or services.
Ownership passes to Eskom on payment, or as otherwise stated in the agreement.
Warranty
The supplier warrants the goods, works or services are fit for their intended purpose and free of defects for one year from acceptance, unless the agreement states otherwise.
Defects found within that period must be rectified within an agreed time at no cost to Eskom.
The supplier must apply reasonable skill and care in performing the agreement.
Indemnity
The supplier indemnifies Eskom against claims, costs and expenses arising from the supplier's negligence, infringement of intellectual or legal rights, breach of statutory duty, defective design, materials or workmanship, including acts of its subcontractors, agents or employees.
Assignment and subcontracting
Neither party may cede or delegate its rights and obligations, and the supplier may not subcontract, without the other party's written consent.
Eskom may transfer its rights and obligations on written notice to any subsidiary, division or operation that becomes a separate legal entity through restructuring.
Breach and termination
If a party breaches the agreement and does not remedy the default after written notice, the other party may terminate.
Eskom may terminate at any time if the supplier defaults in performance, becomes insolvent, or is in financial circumstances that Eskom considers prejudicial to proper performance.
Termination does not affect rights or remedies already accrued to Eskom.
DocumentInvitation to Tender (ITT) - Air Monitoring.pdfReview complete
Description
Source: Invitation to Tender (ITT) - Air Monitoring.pdf
Supply and delivery of ambient air quality monitoring equipment for the Ambient Air Quality Monitoring Station at Acacia Power Station.
Open tender open to all eligible bidders; results in a single contract for the full scope, though Eskom may split the award or increase quantities.
Full equipment specifications and quantities are in the Scope of Work (Attachment 3).
Important Dates
Source: Invitation to Tender (ITT) - Air Monitoring.pdf (TENDER)
Closing date and time: 03 December 2026 at 10:00 (South African Standard Time).
Issue date: 16 November 2026.
Clarification query deadline: at least 5 working days before closing.
Tender validity: 120 days from the closing date.
Briefing / site visit: none (no clarification meeting).
Late submissions: not accepted.
Contact Information
Source: Invitation to Tender (ITT) - Air Monitoring.pdf (TENDER)
Eskom Representative (all queries and clarifications, in writing only)
Note: queries may not be directed to any Eskom official other than the Eskom Representative.
Submission Guidelines
Source: Invitation to Tender (ITT) - Air Monitoring.pdf (TENDER)
Submission method: electronic only, via the Eskom E-tendering site (Eskom Tender Bulletin); no hard copies accepted.
Upload folders: Technical, Commercial, Financial and Other.
File format: all documents in PDF; pricing schedule in both PDF and Excel.
Size limits: 500 MB per document; 4 GB total submission.
Prohibited: zipped or condensed files.
Resubmission: only the latest uploaded version counts; earlier submissions are void.
Status: the bidder must ensure the submission status shows complete.
Late bids: not accepted.
Clarification queries: in writing to the Eskom Representative at least 5 working days before closing.
Alternative tenders: not allowed.
Opening: no public opening; prices are not read out.
Disqualifiable returnables (complete, signed where required, uploaded by closing):
Authorisation Form (Annexure A): names the signatory authorised to bind the bidder; attach the matching board, members', trustees' resolution or power of attorney.
Acknowledgement Form (Annexure B): confirms receipt and completeness of the pack.
Tenderer's Particulars (Annexure C): registration, VAT, tax and contact details, plus any sub-contractor details.
Integrity Pact Declaration (Annexure D): declares the bid free of fraud and corruption.
SBD 1 (Annexure H): offer cover page, signed by all bidders including foreign suppliers.
SBD 4 (Annexure J): declares any state employment or interest connections.
E-tendering Help Manual acknowledgement form.
General Conditions of Purchase (GCOP, Attachment 1): completed and signed.
Pricing schedule (Attachment 2): completed for each item.
Electronic tender copy in PDF with the price list in PDF and Excel.
JV bidders only: JV/consortium agreement stating joint and several liability, confirmation the JV operates as a single entity, and details of one designated JV bank account.
Score-zero returnables (submit at closing; missing items score zero but do not disqualify):
SBD 6.1 Preference Points Claim Form (Annexure I).
Specific Goals evidence.
Before-award returnables: CSD registration, tax compliance, COIDA, Employment Equity and quality documents (see compliance requirements).
Evaluation Criteria
Source: Invitation to Tender (ITT) - Air Monitoring.pdf (TENDER)
Evaluation stages, in order:
Eligibility and basic compliance check.
Functionality / technical evaluation.
Price and Specific Goals scoring (80/20).
Functionality:
Minimum technical score: 80% to advance.
Eskom may, at its sole discretion, lower the threshold to 70% if no bidder reaches 80%.
Detailed criteria and scoring are in the Scope of Work (Attachment 3).
Bidders below the threshold are disqualified from further evaluation.
Price and preference:
Price scored out of 80 points; Specific Goals out of 20 points (PPPFA 80/20 system).
Final ranking = price score + specific goals score, highest to lowest.
Award to the highest scorer unless objective criteria justify otherwise.
Price evaluation basis:
Inclusive of VAT, corrected for arithmetic errors, excluding contingencies.
Adjusted for acceptable variations, deviations or alternatives.
Unconditional discounts counted; conditional discounts applied only at payment.
Specific Goals:
Failure to submit evidence does not disqualify but scores zero for that goal.
Technical Specifications
Source: Invitation to Tender (ITT) - Air Monitoring.pdf (TENDER)
Scope: supply and delivery of ambient air quality monitoring equipment for the Ambient Air Quality Monitoring Station at Acacia Power Station.
Contract structure: single contract to a single supplier for the whole scope; Eskom may award to multiple suppliers if one cannot cover the full scope.
Quantities: Eskom reserves the right to increase the specified quantities.
Detailed specifications: equipment requirements, quantities and technical evaluation criteria are set out in the Scope of Work (Attachment 3).
Pricing Schedule
Source: Invitation to Tender (ITT) - Air Monitoring.pdf
Pricing Schedule / Bill of Quantities: Attachment 2, completed for each item.
Format: submit in PDF and a copy in Excel.
Basis: prices inclusive of VAT for evaluation; arithmetic errors corrected; contingencies excluded.
Financial Requirements
Source: Invitation to Tender (ITT) - Air Monitoring.pdf (TENDER)
Pricing: completed pricing schedule required for each item (Attachment 2), submitted in PDF and Excel; prices inclusive of VAT for evaluation.
Payment terms:
Contracts up to R50,000,000 (incl VAT): payment within 30 days of undisputed invoices.
Contracts above R50,000,000 (incl VAT): payment within 60 days of undisputed invoices.
Performance security: not required.
Financial due diligence: financial analysis / due diligence required; financial viability may be assessed as a contractual requirement.
Price negotiation: Eskom may negotiate with preferred bidders if tendered prices are not market-related.
Compliance Requirements
Source: Invitation to Tender (ITT) - Air Monitoring.pdf (TENDER)
Mandatory registration and statutory documents (valid before award):
CSD registration: CSD number or CSD report; no award without it, except foreign suppliers with no CIPC-registered local entity.
Tax compliance: valid SARS tax clearance PIN or, where applicable, a certified tax clearance certificate; foreign suppliers with no South African footprint are exempt.
B-BBEE: proof of status level via a SANAS-accredited certificate, sworn affidavit, or other B-BBEE Act evidence, claimed on SBD 6.1.
COIDA: certificate of good standing or proof of application from the Compensation Fund (South African bidders).
Employment Equity: proof of compliance and EE report submission for designated employers (South African bidders).
Quality: Form A Category 3, List of Tender Returnables Category 3 and Supplier Quality Management Specification.
CIPC registration details via Tenderer's Particulars.
Not applicable: CIDB grading, local production/content (SBD 6.2), Contract Participation Goals.
Eligibility (any of these disqualifies):
Restricted from doing business with Eskom, the state or state-owned companies, or restricted by National Treasury or Eskom.
National of a sanctioned country.
On the National Treasury Tender Defaulters list.
Submitting more than one tender.
JV/consortium without joint and several liability.
Conflict of interest.
Bid signed by an unauthorised person.
Subcontracting 100% of the scope.
Health & Safety
Source: Invitation to Tender (ITT) - Air Monitoring.pdf
SHEQ requirements may apply as a contractual requirement.
COIDA: original certificate of good standing or proof of application from the Compensation Fund (South African bidders).
Further safety and quality documents may be required per the scope of work.
Contractual Terms
Source: Invitation to Tender (ITT) - Air Monitoring.pdf
Contract form: Eskom General Conditions of Purchase (GCOP).
Award: single contract to a single supplier for the whole scope; Eskom may award to multiple suppliers or increase quantities.
Validity: tender valid for 120 days from closing.
Payment: within 30 days (contracts up to R50m incl VAT) or 60 days (above R50m) of undisputed invoices.
Price negotiation: Eskom may negotiate with preferred bidders where prices are not market-related.
Subcontracting: subcontracting with subsidiary companies is discouraged (may be treated as fronting) and must be declared; 100% subcontracting of the scope disqualifies.
Section
Source: Invitation to Tender (ITT) - Air Monitoring.pdf
Price scoring (out of 80):
Assessed inclusive of VAT and corrected for arithmetic errors.
Contingencies excluded from any bill of quantities or activity schedule.
Adjusted for acceptable variations, deviations or alternative tenders.
Compared on net present value where a programme is provided, accounting for price adjustment factors and exchange-rate movements where applicable.
Unconditional discounts included in evaluation; conditional discounts applied only at payment.
Specific Goals (out of 20): scored under the PPPFA; missing evidence scores zero without disqualification.
Ranking: price and specific goals scores are combined under the 80/20 system; the highest total ranks first, subject to objective criteria.
DocumentAttachment 3 - Scope Of Work (1).pdfReview complete
Description
Source: Attachment 3 - Scope Of Work (1).pdf
General description
The procurement covers supply and delivery of ambient air quality monitoring equipment and ancillary systems.
It supports replacement or renewal of monitoring infrastructure and compliance with atmospheric emission licence conditions at Acacia and Gourikwa.
Equipment will monitor SO2, NOx, O3, PM2.5, PM10 and meteorological parameters.
The contract aims to standardise equipment across both stations and support long-term operation by the purchaser's RT&D function.
Installation, commissioning and operation are excluded.
Implementation is phased, with Acacia first and Gourikwa subject to funding.
Contact Information
Source: Attachment 3 - Scope Of Work (1).pdf (unknown)
Delivery addresses
Acacia Ambient Air Quality Monitoring Station, Settlers Road, Edgemead, Western Cape.
Gourikwa Ambient Air Quality Monitoring Station, Garden Route District Municipality Offices, c/o Sampson and Marlin Streets, Extension 23, Mossel Bay, 6506.
Delivery points
Acacia Power Station.
Gourikwa Power Station.
Submission Guidelines
Source: Attachment 3 - Scope Of Work (1).pdf (unknown)
Required supporting documents
Technical datasheets or brochures for the offered equipment.
Documented guarantee or warranty evidence.
References for previous similar work or supplies.
OEM letters of support where specified.
Power backup: organogram, CVs and qualifications for project supervisor, UPS installer and quality controller, OEM availability proof and UPS installation references.
Evaluation Criteria
Source: Attachment 3 - Scope Of Work (1).pdf (unknown)
Technical scoring is item-specific; no minimum score or price/functionality split is stated.
Common criteria
Specification compliance, warranty/guarantee, brochure/datasheet, references and, where required, OEM support.
Warranty and references as for signal booster/dilution calibrator.
Power backup systems
Resources/competencies 50%: organogram plus 3 CVs/qualifications for project supervisor, UPS installer and quality controller.
Company experience up to 50%: 4 years with 3 CVs/qualifications 50%; 3 years with 2 CVs/qualifications 30%; 2 years with 1 CV/qualification 20%; 1 year with none 0%.
Availability within 3 weeks if not in stock 20%: 3 weeks 20%, 4 weeks 15%, 5 weeks 10%, >5 weeks 5%, with OEM proof.
Warranty 15%: 5 years 15%, 3-4 years 10%, 1-2 years 5%, <1 year 0%.
UPS installation experience 15% for 5 years, with references.
Technical Specifications
Source: Attachment 3 - Scope Of Work (1).pdf (unknown)
Scope
Supply and delivery of ambient air quality monitoring equipment and ancillary systems for Acacia and Gourikwa stations.
Monitored parameters: SO2, NOx, O3, PM2.5, PM10 and meteorological parameters.
Contractor handles manufacture where applicable, supply, testing, certification, packaging and delivery.
Installation, commissioning, operation and maintenance are excluded.
Equipment must be new, unused, fit for purpose, defect-free and compliant with specifications, international standards and manufacturer requirements.
Phasing and delivery
Phase 1: Acacia, current financial year.
Phase 2: Gourikwa, subsequent financial year, subject to capital funding approval.
Single contract may cover both stations; orders may be placed separately.
Acacia delivery: Acacia Power Station / Acacia Ambient Air Quality Monitoring Station, Settlers Road, Edgemead.
Gourikwa delivery: Gourikwa Power Station / Gourikwa Ambient Air Quality Monitoring Station, Garden Route District Municipality Offices, corner Sampson and Marlin Streets, Extension 23, Mossel Bay, 6506.
Equipment and quantities
Signal booster kit: 1 Acacia, 1 Gourikwa; material 0770049; ICASA approved, 4G LTE, all-network compatible, complete kit.
Dilution calibrator: 1 Acacia, 1 Gourikwa; material 0728475; flow accuracy ±1% full scale, repeatability ±0.2%, linearity ±0.5%, dilution air 0-10 SLPM, cylinder gas 0-100 cc/min, zero air 10 SLPM at 30 psi, input 20-40 psig, 85-264V 47-63Hz, selectable analogue outputs, UV photometer 0-100 ppb to 0-10 ppm, ozone generator up to 5.5 ppm LPM.
Fine particulate monitors: material 0687991; line item shows 1 for Acacia; narrative states 7 units; USEPA approved for PM2.5 and PM10, 0-1V analogue outputs, continuous ambient monitoring, range at least 0-1000 μg/m3.
Meteorological equipment/data loggers: 1 each for Acacia; material numbers: data logger 0770050, antenna 0770046, rain gauge 0770058, radiation sensor 0770047, pressure sensor 0770048, temp/humidity sensor 0770056, anemometer 0770977, mast 0770873; key specs: wind 0-100 m/s and 0-360°, pressure 500-1100 hPa, radiation 400-1100 nm, rain gauge 18 cm dia x 30 cm high with 200 cm2 catchment, temperature -50 to +50°C, humidity 0-100% RH, collapsible 10 m masts with photos, CR1000 data loggers and GSM/LTE modems.
Gas analysers: materials SO2 0728681, NOx 0713067, O3 0700870; 1 each for Acacia and 1 each for Gourikwa; 220-240VAC, manuals, pump, Teflon inlet filter holder, ranges 0-0.5 ppm and 0-1.0 ppm, US EPA or TUV approved, one-year consumable kit, 0-1VDC analogue output.
Power backup: 1 Acacia, 1 Gourikwa; material 0720806; one 48V 5kW inverter, two 48V 4.8kWh lithium-ion batteries, cables, fuses, steel rack, parallel battery cables, inverter communication modem.
Zero air generator is listed in scope; no separate specification is provided.
Documentation and acceptance
Required documents: datasheets, calibration certificates, factory test certificates, conformity certificates, warranty certificates, operating/maintenance manuals and Safety Data Sheets for hazardous materials/calibration gases.
Non-compliant, damaged, defective or incomplete equipment must be replaced or rectified at no extra cost.
Standards
ISO 9001, ISO 14001, ISO 7996, ISO 6767, NEM:AQA, Minimum Emission Standards, National Ambient Air Quality Standards, DFFE standards, Acacia AEL WCCT 023 and Gourikwa AEL WCED013.
Experience & Qualifications
Source: Attachment 3 - Scope Of Work (1).pdf
Experience and personnel
For power backup systems, bidders must provide an organogram and three CVs with qualifications for a project supervisor, UPS installer and quality controller.
Company experience is scored by years and supporting CVs/qualifications.
UPS installation experience must be supported by references.
For other equipment, experience is demonstrated through references, brochures/datasheets and OEM letters of support where required.
Quality Management
Source: Attachment 3 - Scope Of Work (1).pdf
Quality assurance
Pre-delivery verification must confirm compliance with technical requirements and manufacturer standards.
Required quality documents include factory test certificates, calibration certificates, certificates of conformity, datasheets, warranty certificates, operating and maintenance manuals and Safety Data Sheets.
The purchaser may review and verify documentation before acceptance.
Delivered equipment will be inspected for specification compliance, quantity, completeness, condition, documentation and accessories.
Non-conformances require investigation, corrective action plan, replacement or rectification at no extra cost and implementation within agreed timeframes.
ISO 9001 and ISO 14001 are referenced as normative standards.
Compliance Requirements
Source: Attachment 3 - Scope Of Work (1).pdf (unknown)
Product and regulatory compliance
Signal booster kit: ICASA approval.
Particulate monitors: USEPA approval for PM2.5 and PM10.
Gas analysers: US EPA or TUV approval.
Environmental compliance references: National Environmental Management: Air Quality Act, Minimum Emission Standards, National Ambient Air Quality Standards, Acacia AEL WCCT 023 and Gourikwa AEL WCED013.
Health & Safety
Source: Attachment 3 - Scope Of Work (1).pdf
Safety documentation
Safety Data Sheets are required for hazardous materials and calibration gases.
Environmental
Source: Attachment 3 - Scope Of Work (1).pdf
Environmental compliance
The equipment supports compliance with Atmospheric Emission Licences for Acacia and Gourikwa.
Applicable environmental instruments include the National Environmental Management: Air Quality Act, Minimum Emission Standards, National Ambient Air Quality Standards and DFFE pollutant standards.
ISO 14001 is referenced.
Monitoring covers SO2, NOx, O3, PM2.5, PM10 and meteorological parameters.
Contractual Terms
Source: Attachment 3 - Scope Of Work (1).pdf
Contract scope and obligations
Contractor must supply, deliver, test, certify, package and transport all specified equipment.
Equipment must be new, unused, fit for purpose and free from defects.
Contractor must provide technical documentation, calibration certificates, manuals, test certificates and warranty documentation.
Contractor must replace damaged, defective or non-compliant equipment at no additional cost.
Warranty obligations must be honoured for the stated warranty period.
Contractor must provide technical support and respond to non-conformance issues.
Separate orders may be placed for each phase, and Gourikwa quantities may be released only after funding approval.
Section
Source: Attachment 3 - Scope Of Work (1).pdf
Additional evaluation guidance
Technical criteria are listed separately for each supply item.
Common factors are specification compliance, warranty/guarantee, brochures/datasheets, references, OEM support and experience.
Power backup evaluation also requires key personnel CVs, organogram, OEM-confirmed availability and UPS installation references.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.