Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Bid(Open-Tender)
Delivery Location
19 Voortrekker Road - Salt River - Cape Town - 7925
Organization Type
GOVERNMENT
Published
18 Nov 2026
OCDS Reference
ocds-9t57fa-178699
TRANSNET soc ltd requires the upgrade and retrofit of an existing wire brush booth into a shot blast booth at salt river in the western cape, on an as-and-when-required basis, under reference TE/2026/06/2250/6983/RFP. the scope covers professional design with ecsa engineer sign-off, structural and civil works, abrasive recovery, blasting equipment, extraction and dust control, compressed and breathing air, electrical and control systems, safety provisions, and testing, training and handover. Bids close on 14 december 2026 at 10:00. The decisive bidder consideration is that pricing must be submitted as a line-item schedule against specification references, with every line priced at unit and total level and VAT at 15% applied to reach the grand total.
Scope: conversion of the existing Salt River wire brush booth into a shot blast booth, executed on an as-and-when-required basis under reference TE/2026/06/2250/6983/RFP.
Professional sign-off: an ECSA-registered professional engineer must certify and sign off the detailed design, calculations and drawings; risk assessments, statutory submissions and approvals form part of the works.
Key equipment: two 200-litre blast pots with 20 m minimum blast hoses, nozzle assemblies with dead-man controls and certification data books; a 1,000-litre vertical air receiver with AIA inspection, certification and data book; two floor scraper recovery sections rated 10 t/h each; bucket elevator and air-wash separator each rated 10 t/h minimum; abrasive storage hopper of 2,000 kg minimum and reserve hopper of 2,500 kg minimum.
Safety and environment: protected internal lighting of 300 lux minimum supported by lighting calculations and lux testing; lifeline/rescue system with certified anchor points; access control, guarding, interlocks, emergency stops and safety PLC/control functions.
Pricing format: every line item carries a unit price and line total against the stated quantity and specification reference, rolling up to a sub-total excluding VAT, VAT at 15%, and a grand total including VAT; quantities are one per line except the blast pots, blast hoses, nozzle assemblies and blast pot certification, which are two each.
Testing and handover: Factory Acceptance Test, Site Acceptance Test, integrated commissioning and performance testing, operator and maintenance training, operating and maintenance manuals, as-built drawings and handover dossier, recommended spares and special tools.
Closing: bids must be submitted by 14 December 2026 at 10:00.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Return to this tenderβs issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Date & Time
Monday, 14 December 2026 - 12:00
Venue
Transnet Engineering, Salt River, Ground Floor, ME Building, 19 Voortrekker Rd, Western Cape, South
Important: Attendance at this briefing session is mandatory. Bids from suppliers who do not attend may be disqualified.
Categories
Request for Bid(Open-Tender)
19 Voortrekker Road - Salt River - Cape Town - 7925
Tenders in this industry often require registration with these bodies.
Construction Industry Development Board (CIDB) registration is mandatory for almost all public sector construction tenders. Ensure your grading matches the tender value.
Recommended Certifications
Having these can improve your winning chances: NHBRC Registration, ISO 9001:2015 (Quality Management), ISO 14001:2015 (Environmental Management), ISO 45001:2018 (Occupational Health & Safety), SACPCMP Registration, ECSA Registration
AI Document Analysis Stages
Description
Source: Annexure A - Technical Specification.pdf18 Nov
2026
Tender Published
Tender was published
14 Dec
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
RFP - Shotblast.pdf
Transnet Engineering requires the upgrade and retrofit of the existing wire brush booth at Salt River into a shot blast booth, delivered on an "as and when required" basis under an NEC3 Engineering and Construction Contract. The work covers design, manufacturing, civil and structural installation, mechanical, electrical and control systems, statutory inspection and commissioning, and training and handover.
Annexure C - Pricing Schedule.xlsx
The department requires the upgrade and retrofit of the existing wire brush booth to a shot blast booth at Salt River. The work is to be carried out on an asβandβwhenβrequired basis.
ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdf
Transnet requires the upgrade and retrofit of the existing wire brush booth to a shot blast booth at Salt River, delivered on an "as and when required" basis. The work is contracted through a period arrangement under which Transnet does not commit to a fixed quantity and orders only against operational need.
Annexure A - Technical Specification.pdf
Transnet Engineering requires the design, manufacture, supply, installation, testing, certification, commissioning and handover of a complete shot blast booth, created by upgrading and retrofitting the existing wire brush booth in Bay 4 at Salt River, Cape Town. The facility will support surface preparation of maritime and railway components, with simultaneous operation by two operators using two blast pots, on an as-and-when-required basis.
Annexure B - Technical Evaluation Criteria.pdf
Upgrade and retrofit of the existing wire brush booth to a shot blast booth at Salt River, on an 'as and when required' basis, for Transnet SOC Ltd in the Western Cape. Bids close on 14 December 2026 at 12:00 (South Africa Standard Time).
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
TransnetSecure Transnet tenders using AI Matching & Recommendations, logistics infrastructure intelligence, compliance analysis, and application support for rail, ports, and pipelines.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubMedian Estimate
RΒ 2Β 298Β 526
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically β no action required from you.
The work is to upgrade and retrofit an existing wire brush booth at Transnet Engineering, Salt River, into a shot blast booth for surface preparation of maritime and railway-related components during refurbishment and maintenance. The contractor must deliver a complete operational facility, including design, manufacture, supply, installation, testing, certification, training, commissioning and handover. The requirement is on an as-and-when-required basis.
Important Dates
Source: Annexure A - Technical Specification.pdf (unknown)Compulsory site inspection
Technical Specifications
Source: Annexure A - Technical Specification.pdf (unknown)Scope and site
Booth and layout
Structural and civil works
Floor, grating and rail system
Abrasive recovery system
Blast pots and pressure equipment
Dust extraction and ventilation
Compressed air and breathing air
Electrical, controls, lighting and safety
Design submissions and approvals
Testing, commissioning and handover
Contractual interface
Quality Management
Source: Annexure A - Technical Specification.pdfQuality management
Compliance Requirements
Source: Annexure A - Technical Specification.pdf (unknown)Statutory and standards compliance
Health & Safety
Source: Annexure A - Technical Specification.pdfHealth and safety
Environmental
Source: Annexure A - Technical Specification.pdfEnvironmental
Contractual Terms
Source: Annexure A - Technical Specification.pdfAll contractual conditions, commercial arrangements, payment mechanisms, risk and liability allocations, warranties beyond technical deliverables, dispute resolution, contract data and CIDB allocations are governed solely by the applicable NEC procurement and contract documents. The technical specification does not duplicate these terms.
Section
Source: Annexure A - Technical Specification.pdfCompliance with the National Environmental Management: Air Quality Act for dust and emissions.
Evaluation Criteria
Source: Annexure B - Technical Evaluation Criteria.pdf (unknown)Technical evaluation is scored out of 100 points.
Minimum qualifying score: 80/100. Bidders scoring below 80 do not proceed to the next evaluation stage.
Criterion 1 - Bidder experience and installed base of industrial shot blast booths: 50 points.
Evidence for each claimed installation: signed completion or commissioning certificate, or client reference letter; client name; installation location; brief scope confirming a comparable industrial shot blast booth; completion date.
Only installations completed within the last 15 years are scored. Each project may be counted once. Transnet may verify claims.
For the one-installation score, a previous pressure equipment certificate, AIA certificate or SANS 347 compliance certificate from a similar project is also listed as evidence.
Criterion 2 - Engineering resources and statutory compliance capability: 25 points.
Required ECSA registrations: mechanical engineering, electrical engineering, and civil or structural engineering. The bidder must identify each person, discipline, registration category and intended project role. Equivalent registrations recognised for work in South Africa may be accepted with proof of recognition.
Criterion 3 - Methodology and project programme: 25 points.
The methodology and programme must cover design, site verification and engineering approvals; manufacturing and procurement; civil, structural, rail and installation work; mechanical, electrical, control, ventilation and safety-system installation; testing, statutory inspection, certification and commissioning; and training, handover documents, warranties and support. The programme must show durations, dependencies, key milestones and the path from contract award to final acceptance.
Technical Specifications
Source: Annexure B - Technical Evaluation Criteria.pdf (unknown)The technical submission must address the full project execution scope:
The project programme must show durations, dependencies, key milestones and the route from contract award to final acceptance and commissioning.
Quality Management
Source: Annexure B - Technical Evaluation Criteria.pdfThe bidder must provide a project execution methodology and programme covering:
The programme must include durations, dependencies, key milestones and the path from contract award to final acceptance and commissioning.
Compliance Requirements
Source: Annexure B - Technical Evaluation Criteria.pdf (unknown)Proposed personnel must hold valid current ECSA registration in mechanical engineering, electrical engineering, and civil or structural engineering. The submission must identify each person, discipline, registration category and intended project role. Equivalent registrations recognised for work in South Africa may be submitted with proof of recognition.
Section
Source: Annexure B - Technical Evaluation Criteria.pdfTechnical scoring is out of 100 points, with a minimum qualifying score of 80/100.
Experience score: 50 points for four or more completed shot blast booth installations; 35 points for two or three; 25 points for one; 0 points for none. Only projects completed in the last 15 years count, each project counts once, and Transnet may verify claims. Evidence must include a completion or commissioning certificate or client reference, client name, location, comparable scope and completion date. A previous pressure equipment certificate, AIA certificate or SANS 347 compliance certificate may support a single qualifying installation.
Engineering resources score: 25 points for three acceptable ECSA registration documents; 20 points for two; 15 points for one; 0 points for none. Required disciplines are mechanical, electrical, and civil or structural engineering. Each person's discipline, registration category and project role must be identified. Recognised equivalent registrations may be accepted with proof.
Methodology and programme score: 25 points for all six required areas; 20 for five; 15 for four; 10 for three; 5 for one or two; 0 for none. Required areas are design and approvals; manufacturing and procurement; civil, structural, rail and installation; mechanical, electrical, control, ventilation and safety systems; testing, statutory inspection, certification and commissioning; and training, handover, warranties and support. The programme must show durations, dependencies, milestones and the path from award to final acceptance.
Description
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdfGeneral bid conditions for Transnet RFQ/RFP processes, covering submission, validity, clarifications, returnables, pricing, delivery, securities, contract formation and restricted suppliers.
Contact Information
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdf (TENDER)Submission address
Enquiries
Submission Guidelines
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdf (TENDER)Submission method
Validity and clarifications
Briefings and site visits
Returnables and disqualification risks
Evaluation Criteria
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdf (TENDER)Evaluation basis
Disqualification and exclusion grounds
Technical Specifications
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdf (TENDER)Goods and works requirements
Pricing Schedule
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdfBid prices must be submitted in the RFX price schedule. Local supplies are priced Delivered RSA named destination; imported supplies are priced Delivered Duty Paid to the South African end destination unless the schedule states otherwise. Prices must be in Rand, firm and not subject to confirmation. Any price alterations must be corrected and initialled by the bid signatory.
Financial Requirements
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdf (TENDER)Currency and pricing
Price basis
Taxes and payment
Security
Compliance Requirements
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdf (TENDER)Eligibility and restrictions
Bidder identification
Foreign bidders
Returnables, samples and forms
Contract compliance
Contractual Terms
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdfContract documents comprise the General Bid Conditions, Terms and Conditions of Contract, Special Conditions, the bid response and the acceptance letter. An acceptance email is treated as delivered one day after it is sent. The successful bidder must sign and return a Deed of Suretyship within 30 calendar days of acceptance; no payment is made until the security is delivered, and failure may lead to cancellation. If the successful bidder fails to sign the contract, accept an order, provide security or meet a Transnet condition, Transnet may award to another bidder and recover extra costs. Transnet does not guarantee any minimum quantity; the supplier must fulfil orders placed during the contract. Estimated annual quantities are indicative only. Transnet may make emergency purchases elsewhere if the supplier cannot meet urgent delivery. Intellectual property in supplier-prepared documents is governed by the contract's IPR provisions.
Section
Source: ANNEXURE D - TRANSNET GENERAL BID CONDITIONS.pdfDuring the evaluation period, bidders may communicate only with the contact person listed in the RFX; unauthorised contact with Transnet officials may lead to disqualification.
Description
Source: Annexure C - Pricing Schedule.xlsxThe works cover the upgrade and retrofit of the existing wire brush booth at Salt River so that it operates as a shot blast booth, delivered on an as-and-when-required basis.
Technical Specifications
Source: Annexure C - Pricing Schedule.xlsx (unknown)Scope of works
Professional services
Booth structure and civil works
Floor and rail system
Abrasive recovery
Blasting equipment
Extraction and dust control
Compressed and breathing air
Electrical and control
Safety and access
Testing, training and handover
Financial Requirements
Source: Annexure C - Pricing Schedule.xlsx (unknown)Pricing schedule
Important Dates
Source: RFP - Shotblast.pdf (RFP)Issue date: 18 November 2026
Compulsory clarification meeting and site walk: 01 December 2026 at 11:00
Closing date and time: 14 December 2026 at 12:00
Tender validity: 12 weeks from closing date
Contact Information
Source: RFP - Shotblast.pdf (RFP)Employer's agent
Submission address
Compulsory meeting and site address
Transnet Engineering
Salt River
Ground Floor, ME Building
19 Voortrekker Rd
Western Cape
South Africa
Submission Guidelines
Source: RFP - Shotblast.pdf (RFP)Submission method
Closing
Compulsory attendance
Returnable documents
Disqualification risks
Evaluation Criteria
Source: RFP - Shotblast.pdf (RFP)Evaluation sequence
Functionality scoring
T2.2-03 Project organogram, management and CVs: 25 points
T2.2-04 Previous experience: 50 points
T2.2-05 Method statement: 25 points
Price and preference
Disqualification
Technical Specifications
Source: RFP - Shotblast.pdf (RFP)Scope
Required execution coverage
Programme
Key personnel
Site conditions
Financial Requirements
Source: RFP - Shotblast.pdf (RFP)Pricing
Financial documents
Due diligence
Tender validity
Compliance Requirements
Source: RFP - Shotblast.pdf (RFP)Eligibility
Professional registrations
Preference
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
These rules are linked to the work category, industry, or regulated service area.
Act 38 of 2000
Important for public-sector construction and infrastructure tenders that require contractor grading or construction procurement standards.
Relevant because this tender appears to involve construction, building work, infrastructure, or site-based delivery.
Act 107 of 1998
Relevant where environmental authorisations, EIAs or environmental compliance may apply.
Relevant because this tender appears to involve construction, building work, infrastructure, or site-based delivery.
Act 85 of 1993
Sets health and safety duties for contractors, employers and service providers working on public-sector sites.
Relevant because this tender appears to involve construction, building work, infrastructure, or site-based delivery.
Act 103 of 1977
Relevant where building standards, renovations, maintenance or construction compliance may apply.
Relevant because this tender appears to involve construction, building work, infrastructure, or site-based delivery.
Address
Level 200, Carlton Centre, 150 Commissioner St, Cbd, Johannesburg, 2001, South Africa
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
5
Last checked
18 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
subsidiary of Transnet
Contact
011-544-9469[email protected]www.transnet.netLevel 200, Carlton Centre, 150 Commissioner St, Cbd, Johannesburg, 2001, South Africa
Key Personnel
Provinces Active
Industries
Learn how to submit a winning bid with these related articles
Everything South African construction contractors need to know about how procurement officers verify cidb grades: what gauteng contractors must ensure is correct β april 2026 update β covering CIDB grading certificate, NHBRC registration (residential), step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
How established construction firms use Joint Ventures with EMEs and QSEs to meet B-BBEE preferential procurement targets and access set-aside contracts.
Everything South African construction contractors need to know about cidb grading system explained: what every gauteng contractor must know in 2026 β april 2026 update β covering CIDB grading certificate, NHBRC registration (residential), step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
Everything South African construction contractors need to know about cidb vs nhbrc: understanding dual registration requirements for residential projects in gauteng β april 2026 update β covering CIDB grading certificate, NHBRC registration (residential), step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
π‘ Want more tendering tips and strategies?
Explore Our BlogGet deep intelligence on Construction. Unlock full pricing strategies, bid frequency, and historical win rates.