Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Quotation
Delivery Location
AS PER SPECIFICATION - AS PER SPECIFICATION - AS PER SPECIFICATION - 3290
Organization Type
GOVERNMENT
Published
07 Sept 2026
OCDS Reference
ocds-9t57fa-169314
Date & Time
Wednesday, 30 September 2026 - 11:00
Venue
null
Categories
Request for Quotation
AS PER SPECIFICATION - AS PER SPECIFICATION - AS PER SPECIFICATION - 3290
Recommended Certifications
Having these can improve your winning chances: SABS Product Certification, NRCS Certification
AI Document Analysis Stages
Evaluation Criteria
Source: General Conditions of Contract- Inclusion of par 34 CIBD.pdf (TENDER)07 Sept
2026
Tender Published
Tender was published
30 Sept
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
guidelines for local content.pdf
Annexures Schedule C D E Local Products DTI 2013 (2).xls
General Conditions of Contract- Inclusion of par 34 CIBD.pdf
WTE-2628ES.pdf
Industrial Procurement – The Department of Trade Industry and Competition.pdf
To download these documents and access AI-powered analysis, visit the main tender page.
Secure DWS tenders with AI Matching & Recommendations, water‑resource compliance, and intelligence for bulk water and sanitation infrastructure.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubMedian Estimate
R 298 425
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
to purchase supplies of a similar quality and up to the same quantity in
Technical Specifications
Source: General Conditions of Contract- Inclusion of par 34 CIBD.pdf (TENDER)provisions
in the SCC shall prevail.
Table of clauses
Compliance Requirements
Source: General Conditions of Contract- Inclusion of par 34 CIBD.pdf (TENDER)No specific requirements found
Health & Safety
Source: General Conditions of Contract- Inclusion of par 34 CIBD.pdf1.1 “Closing time” means the date and hour specified in the bidding
documents for the receipt of bids.
1.2 “Contract” means the written agreement entered into between the
purchaser and the supplier, as recorded in the contract form signed by
the parties, including all attachments and appendices thereto and all
documents incorporated by reference therein.
1.3 “Contract price” means the price payable to the supplier under the
contract for the full and proper performance of his contractual
obligations.
1.4 “Corrupt practice” means the offering, giving, receiving, or soliciting
of any thing of value to influence the action of a public official in the
procurement process or in contract execution.
1.5 "Countervailing duties" are imposed in cases where an enterprise
abroad is subsidized by its government and encouraged to market its
products internationally.
1.6 “Country of origin” means the place where the goods were mined,
grown or produced or from which the services are supplied. Goods are
produced when, through manufacturing, processing or substantial and
major assembly of components, a commercially recognized new
product results that is substantially different in basic characteristics or
in purpose or utility from its components.
1.7 “Day” means calendar day.
1.8 “Delivery” means delivery in compliance of the conditions of the
contract or order.
1.9 “Delivery ex stock” means immediate delivery directly from stock
actually on hand.
1.10 “Delivery into consignees store or to his site” means delivered and
unloaded in the specified store or depot or on the specified site in
compliance with the conditions of the contract or order, the supplier
bearing all risks and charges involved until the supplies are so
delivered and a valid receipt is obtained.
1.11 "Dumping" occurs when a private enterprise abroad market its goods
on own initiative in the RSA at lower prices than that of the country of
origin and which have the potential to harm the local industries in the
in its sovereign capacity, wars or revolutions, fires, floods, epidemics,
quarantine restrictions and freight embargoes.
1.13 “Fraudulent practice” means a misrepresentation of facts in order to
influence a procurement process or the execution of a contract to the
detriment of any bidder, and includes collusive practice among bidders
(prior to or after bid submission) designed to establish bid prices at
artificial non-competitive levels and to deprive the bidder of the
benefits of free and open competition.
1.14 “GCC” means the General Conditions of Contract.
1.15 “Goods” means all of the equipment, machinery, and/or other materials
that the supplier is required to supply to the purchaser under the
contract.
1.16 “Imported content” means that portion of the bidding price represented
by the cost of components, parts or materials which have been or are
still to be imported (whether by the supplier or his subcontractors) and
which costs are inclusive of the costs abroad, plus freight and other
direct importation costs such as landing costs, dock dues, import duty,
sales duty or other similar tax or duty at the South African place of
entry as well as transportation and handling charges to the factory in
the Republic where the supplies covered by the bid will be
manufactured.
1.17 “Local content” means that portion of the bidding price which is not
included in the imported content provided that local manufacture does
take place.
1.18 “Manufacture” means the production of products in a factory using
labour, materials, components and machinery and includes other
related value-adding activities.
1.19 “Order” means an official written order issued for the supply of goods
or works or the rendering of a service.
1.20 “Project site,” where applicable, means the place indicated in bidding
documents.
1.21 “Purchaser” means the organization purchasing the goods.
1.22 “Republic” means the Republic of South Africa.
1.23 “SCC” means the Special Conditions of Contract.
1.24 “Services” means those functional services ancillary to the supply of
the goods, such as transportation and any other incidental services,
such as installation, commissioning, provision of technical assistance,
training, catering, gardening, security, maintenance and other such
obligations of the supplier covered under the contract.
1.25 “Written” or “in writing” means handwritten in ink or any form of
electronic or mechanical writing.
including bids for functional and professional services, sales, hiring,
letting and the granting or acquiring of rights, but excluding
immovable property, unless otherwise indicated in the bidding
documents.
2.2 Where applicable, special conditions of contract are also laid down to
cover specific supplies, services or works.
2.3 Where such special conditions of contract are in conflict with these
general conditions, the special conditions shall apply.
shall not be liable for any expense incurred in the preparation and
submission of a bid. Where applicable a non-refundable fee for
documents may be charged.
3.2 With certain exceptions, invitations to bid are only published in the
also be applicable to any other enterprise or any partner, manager,
director or other person who wholly or partly exercises or exercised or
may exercise control over the enterprise of the first-mentioned person,
and with which enterprise or person the first-mentioned person, is or was
in the opinion of the Accounting Officer / Authority actively associated.
23.6 If a restriction is imposed, the purchaser must, within five (5) working
days of such imposition, furnish the National Treasury, with the
following information:
(i) the name and address of the supplier and / or person restricted by the
purchaser;
(ii) the date of commencement of the restriction
(iii) the period of restriction; and
(iv) the reasons for the restriction.
These details will be loaded in the National Treasury’s central database
of suppliers or persons prohibited from doing business with the public
sector.
23.7 If a court of law convicts a person of an offence as contemplated in
sections 12 or 13 of the Prevention and Combating of Corrupt Activities
Act, No. , the court may also rule that such person’s name be
endorsed on the Register for Tender Defaulters. When a person’s name
has been endorsed on the Register, the person will be prohibited from
doing business with the public sector for a period not less than five years
and not more than 10 years. The National Treasury is empowered to
determine the period of restriction and each case will be dealt with on its
own merits. According to section 32 of the Act the Register must be
open to the public. The Register can be perused on the National Treasury
website.
duties and rights provisional payment or anti-dumping or countervailing right is
increased in respect of any dumped or subsidized import, the State is
not liable for any amount so required or imposed, or for the amount of
any such increase. When, after the said date, such a provisional
payment is no longer required or any such anti-dumping or
countervailing right is abolished, or where the amount of such
provisional payment or any such right is reduced, any such favourable
difference shall on demand be paid forthwith by the contractor to the
State or the State may deduct such amounts from moneys (if any)
which may otherwise be due to the contractor in regard to supplies or
services which he delivered or rendered, or is to deliver or render in
terms of the contract or any other contract or any other amount which
may be due to him
Important Dates
Source: Industrial Procurement – The Department of Trade Industry and Competition.pdf (unknown){"closingDate":"7 December 2011"}
Contact Information
Source: Industrial Procurement – The Department of Trade Industry and Competition.pdf (unknown){"name":"Ms Cathrine Matidza","email":"[email protected]","phone":"+27 (12) 394 1435","department":"of Trade,","address":"nical Barriers to Trade"}
Evaluation Criteria
Source: Industrial Procurement – The Department of Trade Industry and Competition.pdf (unknown)National Treasury Instruction on: Invitation and evaluation of bids based on a stipulated minimum threshold for local production and content for Valve Products
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you
The revised Preferential Procurement Policy Framework Act (PPPFA) regulations which came into effect on the 7 December 2011 empower the Department of Trade,
OSD Tender 70% (volumes)
Solar Water Heater Components 70%
Valves products and actuators 70%
Prepaid Electricity Meters 70%
Post Paid Electricity Meters 70%
Class 1 70%
Class 2 70%
Technical Specifications
Source: Industrial Procurement – The Department of Trade Industry and Competition.pdf (unknown)Construction
Steel Value-added Products 100%
100%
Fabricated Structural Steel 100%
Joining/Connecting Components 100%
Frames 100%
Roof and Cladding 100%
Fasteners 100%
Wire Products 100%
Ducting and Structural pipework
Experience & Qualifications
Source: Industrial Procurement – The Department of Trade Industry and Competition.pdfPrepaid Electricity Meters 70%
Post Paid Electricity Meters 70%
SMART Meters 50%
Working Vessels/Boats (All types): 60%
Components 10% – 100%
Conveyance Pipes 80% – 100%
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you
consentTransformersto the useandof cookies.Shunt InformationReactors:about the use of cookies on this website is available by clicking on Privacy Policy.
AcceptClass 0 90%
Class 1 70%
Class 2 70%
Class 3 45%
Class 4 10%
Components and conversion activities 50% – 100%
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you
We use cookies on our website to Privategive youBagtheX84,mostPretoria,relevantGauteng,experience0001 by remembering your preferences and repeat visits. By clicking “Accept”, you
consent to the use of cookies. InformationCourier about the use of cookies on this website is available by clicking on Privacy Policy.
12 Robert Sobukwe, Sunnyside, Pretoria, Gauteng, 0002
together, growing the economy
the dtic Customer Contact Centre: 0861 843 384
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you
consent to the use of cookies. Information about the use of cookies on this website is available by clicking on Privacy Policy.
Quality Management
Source: Industrial Procurement – The Department of Trade Industry and Competition.pdfPumps, Medium Voltage (MV) Motor and Associated Accessories 70%
Casting or Frame Fabrication 100%
Fabrication and winding of the Rotor Core 100%
Accessories 100%
Assembly and testing of the fully-built unit 100%
Rail Permanent Way 90%
Rails and rail joints 100%
Ballasts 100%
Ballastless 100%
Turnouts/switches and crossings 100%
Railway sleepers 100%
Rail fastening and accessories 100%
Railway maintenance of way plant & equipment 70%
Assembly and testing of fully build unitst 100%
Plastic Pipes 100%
Polyvinyl chloride (PVC) pipes 100%
High density polyethylene (HDPE) pipes 100%
Polypropylene (PP) pipes 100%
Glass reinforced plastic (GRP) pipes 100%
Air insulated MV Switchgear 50%
Instrument Transformers 15%
Busbars 5%
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you Housing 25%
consentSwitchingto the useDevicesof cookies. Information about the use of cookies on this website is available by clicking on5%Privacy Policy.
BulkAcceptMaterial Handling 85%
Conveyer Idlers 70%
Structural Steel 100%
100%
Rubber 100%
Conveyor Belt 60%
Compliance Requirements
Source: Industrial Procurement – The Department of Trade Industry and Competition.pdf (unknown)No specific requirements found
B-BBEE Details: Know the dtic Media Room Financial Assistance Sectors and Service Procurement and Tenders
Research and Statistics
IndustrialIndustrial ProcurementProcurement
Home / Sectors and Services / Industrial Development / Industrial Procurement
Industrial Procurement
The revised Preferential Procurement Policy Framework Act (PPPFA) regulations which came into effect on the 7 December 2011 empower the Department of Trade,
Industry and Competition (the dtic) to designate industries, sectors and sub-sectors for local production at a specified level of local content.
The following industries, sectors and sub-sectors have so far been designated for local production with minimum local content thresholds.
Industry/sector/sub-sector Minimum threshold for local content
Buses (Bus Body) 80%
Textile, Clothing, Leather and Footwear 100%
Steel Power Pylons, 100%
Monopole Pylons,
Steel Substation Structures,
Powerline Hardware,
Street Light Steel Poles,
Steel Lattice Towers
Canned / Processed Vegetables 80%
Pharmaceutical Products:
OSD Tender 70% (volumes)
Family Planning Tender 50% value
Rail Rolling Stock 65%
Set Top Boxes (STB) 30%
Furniture Products:
Office Furniture 85%
School Furniture 100%
Base and Mattress 90%
Solar Water Heater Components 70%
Electrical and telecom cables 90%
Valves products and actuators 70%
Residential Electricity Meter :
Prepaid Electricity Meters 70%
Post Paid Electricity Meters 70%
SMART Meters 50%
Working Vessels/Boats (All types): 60%
Components 10% – 100%
Conveyance Pipes 80% – 100%
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you
consentTransformersto the useandof cookies.Shunt Informat
Contact Information
Source: guidelines for local content.pdf (unknown){"name":null,"email":null,"phone":"+27 12 394 9500","department":"of Trade and Industry","address":"Private Bag X84, PRETORIA, 0001, the dti Campus, 77 Meintjies Street, Sunnyside, 0002, Tel: (012) 394 0000"}
Technical Specifications
Source: guidelines for local content.pdf (unknown)of how to
calculate local content of products (goods, services and works) by
components/material/services and enables them to keep an updated record
for verification requirements as per the SATS 1286:2011 Annexure A and B.
The guideline consists of two parts, namely:
a written guideline; and
three declarations that must be completed:
Declaration C: “Local Content Declaration – Summary Schedule” (see
Annexure C);
Declaration D: “Imported Content Declaration – Supporting Schedule
to Annex C” (see Annexure D); and
Declaration E: “Local Content Declaration – Supporting Schedule to
Annex C” (see Annexure E).
The guidelines and declarations should be used by tenderers when preparing
a tender. A tenderer must complete Declarations D and E, and consolidate
the information on Declaration C.
Annexure C must be submitted with the tender by the closing date and time
as determined by the Tender Authority. The Tender Authority reserves the
right to request that Declarations D and E also be submitted.
If the tender is successful, the tenderer must continuously update
Declarations C, D and E with actual values for the duration of the contract.
Note:
Annexure A is a
Quality Management
Source: guidelines for local content.pdfmanagement, design, testing, marketing, etc and makes royalty and lease
payments, such payments relating to the tender must be included when
calculating imported content.
2.3.1.2. Imported by a third party and supplied to the tenderer:
management, design, testing, marketing etc. and makes royalty and lease
payments, such payments relating to the tender must be included when
calculating imported content.
2.3.1.3. Exempt Imported Content:
Contractual Terms
Source: guidelines for local content.pdfmarketing, insurance, financing, interest and mark-up costs.
E13. Total local content:
The total local content is the sum of the values of E9, E10, E11 and
E12. This total must correspond with C24 of Annexure C.
Important Dates
Source: WTE-2628ES.pdf (TENDER){"closingDate":"30 SEPTEMBER 2026","closingTime":"11:00"}
Contact Information
Source: WTE-2628ES.pdf (TENDER){"name":"Mr Mvelo","email":"[email protected]","phone":"033 239 1212","department":"OF WATER AND SANITATION","address":null}
Submission Guidelines
Source: WTE-2628ES.pdf (TENDER)Returnable Documents: *Please do not address your parcel to an official if you are making use of a delivery company., C2.2 BILL OF QUANTITIES C2.2
Evaluation Criteria
Source: WTE-2628ES.pdf (TENDER)T1.2 Evaluation criteria t1.2
The evaluation committee will be following a phased approach during evaluation.
T1.2 Evaluation criteria
DWS will evaluate all proposals according to the Preferential Procurement Regulations, 2022, using 80/20
preference points system as prescribed in the Preferential Procurement Policy Framework Act (PPPFA,
Act . The lowest acceptable bid will score 80 points for price and a maximum of 20 points will be
awarded for the specific goals. Maximum of 100 points will be scored for functionality (quality).
(2) Functionality Requirements
Phase 2: functionality compliance
be disqualified from further evaluation.
states that, if it is unclear whether the 80/20 preference point system applies, an organ
(a) an invitation for tender for income-generating contracts, that either the 80/20
preference point system will apply and that the highest acceptable tender will be
used to determine the applicable preference point system; or
(b) any other invitation for tender, that either the 80/20 or 90/10 preference point
the applicable preference point system, then the organ of state must indicate the
points allocated for specific goals for both the 90/10 and 80/20 preference point
Table 1: Specific goals for the tender and points claimed are indicated per the table
(Note to organs of state: Where either the 90/10 or 80/20 preference point system is
applicable, corresponding points must also be indicated as such.
Note to tenderers: The tenderer must indicate how they claim points for each
preference point system.)
Number of points Number of points
The specific goals allocated points in
(80/20 system) (80/20 system) terms of this tender
Technical Specifications
Source: WTE-2628ES.pdf (TENDER)construction programme-
Provides a detailed list of tasks necessary to complete the works
Experience & Qualifications
Source: WTE-2628ES.pdfthe Project Manager or Site agent. capability
Attach 1 page resume of Project Manager or Site Agent indicating, amongst Team
relevant), etc. Artisan/Site Agent with 2 or more years’ experience.
to the project and encompass milestones Proposed construction programme Appropriate timeline and time estimates
Past relevant work Experience - One (1) award letters, completion certificates and
verifiable completion certificates of which the scope of work is relevant to the
project scope as prescribed in the project specification. relevant experience
Compliance Requirements
Source: WTE-2628ES.pdf (TENDER)valid Tax Clearance Certificate issued by the South African
Tax Compliance status PIN Active registration with Company Intellectual Property Commission (to be verified
Tax compliance status
Tax compliance requirements
Tax compliance status (tcs) pin may be made via e-filing through the SARS website
Tcs pin is available but the bidder is registered on the central supplier database (csd), a csd
CSD report
CSD Reports (comprehensive)
Csd number
Csd number must be provided
Central Supplier Database
Central supplier database (csd), a csd
completion certificates and
completion certificates of which the scope of work is relevant to the
C2.2 Bill of quantities c2.2
Should you require any further information in this regard, please do not hesitate to contact
SBD3.1 Pricing Schedule – Firm Prices
SBD4 Declaration of Interest
A: Bill of Quantities (BOQ)
2: An original valid Tax Clearance Certificate issued by the South African
3: Certified copies of Identity Documents of shareholders
7: CSD Reports (comprehensive)
VAT registration
If the answer is “NO” to all of the above, then IT is not a requirement to register for a tax compliance status
B-BBEE Minimum Level: 1
Points Allocation: 80 points
B-BBEE Details: e scope of work with full understanding
and a logical structure.
Phase 3: administrative compliance
Bidders are required to comply with the following listed below:
No Criteria Yes No
1 Companies must be registered with National Treasury’s Central Supplier Database
must submit CSD report. Provide MAAA number on SBD1
2 Tax compliant with SARS (to be verified through CSD and SARS). Attach Tax
Compliance status PIN Active registration with Company Intellectual Property Commission (to be verified
through CSD and CIPC).
Attach copy of Bidder’s CIPC / CIPRO certificate.
4 A valid copy of B-BBEE Status Level Verification Certificate or a valid original sworn
affidavit (failure to submit, the Bidder will forfeit the relevant points allocated for B-
BBEE under specific goals)
Page | 6
No Criteria Yes No
5 A valid letter of Good Standing with the Compensation Commissioner in terms of the
Compensation for Occupational Injuries and Diseases Act No and or third
parties’ insurance registered with Financial Service Board (COIDA).
6 Initial and sign Tender data section (T1 & T2) and all required documents to be
submitted with tender.
Initial each page of section C1, C2 and C3 and sign where required.
7 Letter of appointment of duly authorized person to sign bid. Proof of such authority must
be submitted with the bid.
If by an individual, must be signed by that individual or by someone on his behalf duly
authorised thereto and proof of such authority must be produced.
If the bid is by a Company, it must be signed by a person duly authorised thereto by
a Resolution of a Board of Directors a copy of which Resolution, duly certified by the
Chairman of the Company is to be submitted with the bid.
8 Complete, sign, submit SBD1, SBD4, SBD6.1 and Annexures C (Loca
Health & Safety
Source: WTE-2628ES.pdf(a) The bid must be signed on the Invitation to Bid form (SBD 1) annexed hereto with all blanks in the
bid and the appendix filled in.
(b) All spaces in the bid forms and other annexures shall be completed in full.
(c) SBD 3.1 in the bid document and the Pricing Schedule must be fully completed and priced
out by the bidder. Failure to do so will deem your bid invalid.
(d) The bid documents shall not be separated in any way nor must any pages be detached from the
original documents.
Methodology- Items (a-g) must be clearly outlined in the detailed method
statement.
a) Work Sequence
b) Time
c) Resources
d) Associated Health, Safety and Environmental Assessments
e) Control Measures
f) Welfare Facilities Methodology
I certify that the information furnished in paragraphs 1, 2
and 3 ABOVE IS CORRECT.
safety friction clamps hold the extensions firmly in place.
Specifications Teeth Configuration: 6.5 teeth per 30mmMetal:
Special alloy steel Length: 16.5 inches, 20 feet, 7.9 feet
Material: Aluminium and Rubber Colour: Silver and Yellow UPS
Oversize: Yes UPS Overweight: Yes Quantity per Box/Carton:
3Blade Thickness: 1.8mmKerf: 1.8mm
4 Portable Diesel 03 Portable diesel pumps generally fall into two categories: fuel transfer
Pump pumps (12V/240V electric or battery-powered) and diesel engine-
driven water/fire pumps. Typical specifications range from 40 to 85
L/min for fuel transfer units, and up to 500+ L/min for engine-driven
water pumps. Portable Diesel Fuel Transfer Pumps (12V / 24V DC)
Contractual Terms
Source: WTE-2628ES.pdf1 Companies must be registered with National Treasury’s Central Supplier Database
must submit CSD report. Provide MAAA number on SBD1
2 Tax compliant with SARS (to be verified through CSD and SARS). Attach Tax
Compliance status PIN Active registration with Company Intellectual Property Commission (to be verified
through CSD and CIPC).
Attach copy of Bidder’s CIPC / CIPRO certificate.
parties’ insurance registered with Financial Service Board (COIDA).
6 Initial and sign Tender data section (T1 & T2) and all required documents to be
submitted with tender.
Initial each page of section C1, C2 and C3 and sign where required.
Required by: OPERATIONS EASTERN
Att: SUPPLY CHAIN MANAGEMENT
Brand and model ........................................
Country of origin ........................................
Does the offer comply with the specification(s)? *YES/NO
If not to specification, indicate deviation(s) .........................................
Period required for delivery ........................................
*Delivery: Firm/not firm
Note: All delivery costs must be included in the bid price, for delivery at the prescribed
destination.
** “all applicable taxes” includes value- added tax, pay as you earn, income tax,
unemployment insurance fund contributions and skills development levies.
*Delete if not applicable
Page | 13
Sbd4
Bidder’s disclosure
1 Brush cutters with 05 Cylinder displacement: 41.5 cm3
harness or Power output: 1.5 kW
full kit Fuel capacity (litres): 0.94 litre
(Comprehensive Fuel consumption: 653 g/kWh
brochure must be provided) Maximum power speed: 7 500rpm
Idling speed: 2 500rpm
Clutch engagement speed (±120): 3 300rpm
Weight (excl. cutting equipment):
7.6 kg
Overall length (m): 1.483 m
Sound pressure level dBa: 99 dB(A) to 113 dB(A)
2 Chainsaw 05 Cylinder displacement: 70.7 cm3
(Comprehensive Power output: 3.9 kW
brochure must be provided) Recommended bar length, max: 28 in
Weight (excl. cutting equipment): 6.3 kg
Page | 24
3 Pole saw 05 Silky Hayate 6.1m 3 Extension Pole Saw or similar pole saw. Heavy
(Comprehensive duty aluminium telescoping pole saw.
brochure must
provided) Technical Features
✓ Retracted length: 2440 mm (incl. blade)
✓ Extended length: 6300 mm (incl. blade)
✓ Blade length: 390 mm
✓ Teeth: extra-large (6.5 teeth per 30 mm)
✓ Limited lifetime warranty Fileable FPA Confirmed Limited
✓ 4- Retsume
✓ Nickle Coating
✓ Fileable
✓ FPA Confirmed
✓ Limited Lifetime Warranty
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
AS PER SPECIFICATION - AS PER SPECIFICATION - AS PER SPECIFICATION - 3290
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
5
Last checked
11 Sept 2026
AI status
Not enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Key Personnel
Learn how to submit a winning bid with these related articles
Your meticulously crafted General sector tender submission can be disqualified for a single, seemingly minor compliance oversight. The reality for South African contractors is that technical competence is no longer sufficient; it is underpinned by a non-negotiable framework of documentary compliance. This regulatory guide: mastering CSD and BBBEE compliance for general sector tenders in south africa provides a comprehensive, step-by-step breakdown of the mandatory registrations and certificates you must secure and present. We detail the precise requirements for CSD, BBBEE, SARS TCS, CIPC, and COIDA, explaining their function within the procurement ecosystem governed by the PFMA and PPPFA. Learn the actionable steps to prepare your business, avoid the most common disqualifying errors, and leverage technology to streamline your compliance process for successful bidding in 2026 and beyond.
Everything South African general contractors need to know about how to write a winning tender proposal without an in-house bid team in gauteng — covering CSD, BBBEE, step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
This definitive guide provides General sector contractors with the precise, actionable steps required to achieve and maintain CSD and BBBEE compliance for South African public tenders in 2026. Authored by Dr. Sarah Mokwena, a Legal Compliance Specialist, it meticulously walks through the regulatory framework, mandatory registrations, and the critical documentation needed to avoid disqualification. We dissect the common, costly errors made during submission and provide a clear checklist to ensure your bid is responsive and competitive. Learn how to navigate the Central Supplier Database, validate your BBBEE status, and integrate compliance into your tender preparation process.
A meticulous legal compliance guide for South African SMEs and General contractors navigating the 2026 procurement landscape. This case study-driven analysis provides a regulatory intelligence deep dive into the mandatory frameworks of CSD (Central Supplier Database), BBBEE (Broad-Based Black Economic Empowerment), SARS Tax Compliance, CIPC registration, and COIDA. It outlines the precise, actionable steps contractors must take to achieve compliance, highlights common disqualification pitfalls in tender submissions, and explains how integrated tools like Tenders-SA.org can streamline the process. The guide serves as an essential evergreen resource for any business seeking to compete effectively for public sector contracts in the General sector.
💡 Want more tendering tips and strategies?
Explore Our BlogGet deep intelligence on Supplies: General. Unlock full pricing strategies, bid frequency, and historical win rates.