Supply and delivery of valves

{"name":"Ms Dineo","email":"[email protected]","phone":"001 688 1400","department":"ies by organ of state (Johannesburg","address":"ation relating to an identifiable living, natural"}

Returnable Documents: PLEASE SUPPLY THE FOLLOWING DOCUMENTS TO ENABLE US TO EVALUATE YOUR, 1 Original Valid Tax Clearance COMPULSORY, (Please note that the Sworn, 4 Signed Declaration of Interest COMPULSORY, form (MBD 4), 5 Declaration of Bidders past COMPULSORY, practices (MBD 8), Proposal Determination (MBD 9), 7 Proof of CSD registration /MAAA COMPULSORY, 9 Company registration COMPULSORY, DECLARATION OF INTEREST

All QUOTATIONS MUST BE ON COMPANY LETTERHEADS.

Brand name offered uom qty requried price quoted excl. Of VAT dis

1145 valve gate copper alloy 050mm non rising ea 50

Spindle female to female threaded SANS 776

Approved

5377 valve air release 150mm double acting pn16 ea 20

2801 valve air release 100mm double acting pn16 ea 20

1143 valve gate copper alloy 025mm non rising ea 100

Spindle female to female threaded SANS 776

Approved

1611 TEE 90o STEEL EQUAL 80MM SHOULDERED. TO BE EA 20

Fusion bonded powdered epoxy coated to jhb

Water specifications. Complying with SANS 815

Specific Goals: SMME (An EME or QSE) 51% or more black owned by Black People.

The Valves Must Be Manufactured Locally

Johannesburg Water Technical Team Will Need To Inspect The Valves During The Manufacturing Stage, To Ensure They Comply With The Specifications,

Standards and Requirements of Johanneburg Water. The Technical Teams Needs To Be Notified 48 Hours Prior To Inspection.

Please Attach Manufacturer Datasheet 6000080632

Supplier details 1. Quotations received after closing date and time will not be accepted.

2. Quotations without brand names where required will not be accepted.

Offical stamp

3. Total quotation must be inclusive of all appl

the word “competitor” shall include any individual or organization, other than the

bidder, whether or not affiliated with the bidder, who:

(a) has been requested to submit a bid in response to this bid invitation.

(b) could potentially submit a bid in response to this bid invitation,

based on their qualifications, abilities or experience; and

(c) provides the same goods and services as the bidder and/or is in

the same line of business as the bidder

per B- BBEE Practice Guide

, Non-compliant affidavit

Will be scored zero)

3 Municipal rates and taxes (Must COMPULSORY

not be older than 90 days in

arrears in line with regulation 38.

Johannesburg 2107

www.johannesburgwater.co.za

4.4 Does the bidder or any of its directors owe any municipal rates and taxes or municipal charges Yes No

to the municipality / municipal entity, or to any other municipality / municipal entity, that is in

arrears for more than three months?

4.4.1 If so, furnish particulars:

4.5 Was any contract between the bidder and the municipality / municipal entity or any other Yes No

organ of state terminated during the past five years on account of failure to perform on or

comply with the contract?

4.7.1 If so, furnish particulars:

1145 valve gate copper alloy 050mm non rising ea 50

Spindle female to female threaded SANS 776

5377 valve air release 150mm double acting pn16 ea 20

2801 valve air release 100mm double acting pn16 ea 20

1143 valve gate copper alloy 025mm non rising ea 100

Spindle female to female threaded SANS 776

1.1 Full Completion of the Bill of Quantities (BOQ)/ Specification (where applicable)

1.2 Attendance of compulsory site briefing (where applicable)

1.3 Attachment of datasheet, reference letter, proof of certification, proof of accreditation,

functionality requirements (where applicable)

1.4 No RFQ will be considered from persons in the service of the state

1.5 No Bidder who is blacklisted by National Treasury or any National Authority due to non-

performance will be considered

1.6 All Quotes should be on PDF (MS WORD, MS EXCEL, PICTURES ARE NOT ALLOWED) and

Company [TICK

Applicable box]

3.6. I, the undersigned, who is duly authorised to do so on behalf of the company/firm,

certify that the points claimed, based on the specific goals as advised in the tender,

qualifies the company/ firm for the preference(s) shown and I acknowledge that:

i) The information furnished is true and correct.

ii) The preference points claimed are in accordance with the General Conditions

as indicated in paragraph 1 of this form.

iii) In the event of a contract being awarded as a result of points claimed as

shown in paragraphs 1.4 and 4.2, the contractor may be required to furnish

documentary proof to the satisfaction of the organ of state that the claims

are correct.

iv) If the specific goals have been claimed or obtained on a fraudulent basis or

any of the conditions of contract have not been fulfilled, the organ of state

may, in addition to any other remedy it may have –

Proposal Determination (MBD 9)

3.3. Name of company/firm......................................................

3.4. Company registration number...................................................

3.5. Type of company/ firm

 Partnership/Joint Venture / Consortium

 One-person business/sole propriety

 Close corporation

 Public Company

 Personal Liability Company

 (Pty) Limited

 Non-Profit Company

 State

that, when bids are considered, reasonable steps are taken to prevent any form of bid-

rigging.

5 In order to give effect to the above, the attached Certificate of Bid Determination (MBD 9)

must be completed and submitted with the bid:

Johannesburg Water Technical Team Will Need To Inspect The Valves During The Manufacturing Stage, To Ensure They Comply With The Specifications, Standards and Requirements of Johannesburg Water. The Technical Teams Needs To Be Notified 48 Hours Prior To Inspection. Please Attach Manufacturer Datasheet

The Valves Must Be Manufactured Locally

you. For example: to gather contact information, to confirm and verify your identity, for the evaluation and

functionality requirements (where applicable)

Quotations will be evaluated on the 80/20 point scoring

System. 80 points will be allocated to price and the

Remaining 20 points will be allocated for specific goals as

Per PPPFA 2022

and serves as a claim form for preference points for specific goals.

1.1 The following preference point systems are applicable to invitations to tender

the 80/20 system for requirements with a Rand value of up to R50 000 000

the 90/10 system for requirements with a Rand value above R50 000 000

a) The applicable preference point system for this tender is the 90/10 preference point

b) The applicable preference point system for this tender is the 80/20 preference point

c) Either the 90/10 or 80/20 preference point system will be applicable in this tender.

1.3 Points for this tender (even in the case of a tender for income-generating

(b) Specific Goals

The maximum points for this tender are allocated as follows

Specific goals: 20

Total points for Price and SPECIFIC GOALS 100

of this tender to claim points for specific goals with the tender, will be interpreted to

mean that preference points for specific goals are not claimed.

preferences, in any manner required by the organ of state.

to raise prices or lower the quality of goods and / or services for purchasers who wish to acquire goods and / or services

Specific Goals: SMME (An EME or QSE) 51% or more black owned by Black People.

Johannesburg Water Technical Team Will Need To Inspect The Valves During The Manufacturing Stage, To Ensure They Comply With The Specifications,