City power johannesburg requires maintenance services for substations, switching yards and servitudes across its network. Bidders must hold a valid coida certificate and electrical contractor registration with the department of labour, and must price every item in the bill of quantities; any unpriced item makes the bid non-responsive. Bids are evaluated first on functionality, with a minimum score of 85%, then on price (90 points) and specific goals (10 points). A maximum of four bidders will be awarded.
Key Requirements
Closing and submission: 28 January 2027 at 11:00; sealed bids only in the tender box at 40 Heronmere Road, Reuven, Booysens (Tender Advice Centre); emailed or faxed bids are rejected; bid documents are available from www.etenders.gov.za and www.citypower.co.za.
Enquiries: Blessing Nemasiwane on 011 490 7669 or [email protected].
No briefing session: no compulsory briefing or site visit is scheduled.
Mandatory registrations: valid COIDA certificate and proof of Electrical Contractor Registration with the Department of Labour.
Bill of Quantities: a price must be entered against every item; any unpriced item disqualifies the bid as non-responsive.
Functionality threshold: bidders must score at least 85% out of 100% to proceed to price (90 points) and specific goals (10 points).
Specific goals: 4 points for at least 51% black ownership, 4 points for at least 30% black women ownership, and 2 points for a local supplier within the City of Johannesburg; evidence includes an original or certified B-BBEE certificate or affidavit not older than 3 months (consolidated verification-agency certificate for JV/consortium), certified owner IDs, and a municipal rates account or lease agreement.
Awards: a maximum of four bidders will be appointed.
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
DocumentBid Document 2670GS.pdfReview complete
Important Dates
Source: Bid Document 2670GS.pdf (TENDER)
Important Dates
18 Nov
2026
PUBLICATION
Tender Published
Tender was published
28 Jan
2027
DEADLINE
Closing Date
Tender closing date
Procurement Rules & Compliance ContextThis tender may be governed by South African public procurement rules covering fairness, transparency, preferential procurement, anti-corruption, administrative justice and access to information.
10 rules
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
Core procurement rules
These rules commonly apply to South African public-sector procurement.
7
Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
high
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Constitution of the Republic of South Africa, 1996 – Section 217
Act 108 of 1996 (s217)
high
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf
City Power Johannesburg requires maintenance services for substation yards, switching yards, and transmission servitudes covering horticulture, civil infrastructure, electrical equipment, and vegetation clearance on overhead lines. The work is priced through a bill of quantities with unit rates for materials and services.
City Power Johannesburg (SOC) Ltd invites bids for Substation, Switching Yards and Servitudes Maintenance (BID-2670GS). The tender closes on 28 January 2027 at 11:00 SAST and requires submission of all mandatory documents, pricing schedules, certifications and financial statements.
Maintenance of substations, switching yards and servitudes is required by City Power – Johannesburg. Bidders must submit a bid for the provision and execution of these maintenance services.
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Appointment of a service provider for the supply, delivery, installation, and commissioning of HF equipment at Bapsfontein and Delmas with associated maintenance and support.
Based on SITA benchmarks. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
Closing date and time: 28 January 2027 at 11:00.
Clarification meeting: not applicable.
Clarification requests: allowed up to five working days before closing, by email to the responsible buyer.
Physical delivery to the bid box at City Power Head Office Tender Advice Centre, 40 Heronmere Road, Reuven, Johannesburg.
Email, fax, telephonic, telegraphic and telex offers are not accepted.
Submit one original, two copies and a memory stick containing the full bid.
No two-envelope system applies.
Use the official forms provided and do not retype them.
Packages must show tender number 2670GS and the employer's address; original and copies should be sealed and marked accordingly.
Closing
Closing date and time: 28 January 2027 at 11:00.
Late bids will not be considered.
Returnable documents
MBD 1: invitation to bid and bidder details.
Form of offer/acceptance: signed offer to contract.
MBD 3.1: firm pricing schedule.
MBD 3.2: non-firm pricing schedule, where applicable.
MBD 4: declaration of interest.
MBD 5: declaration for procurement above R10 000 000.
MBD 6.1: preference points claim.
MBD 6.2: local production and content declaration.
MBD 7.1: declaration for purchase of goods.
MBD 8: declaration of past supply chain management practices.
MBD 9: certificate of independent bid determination.
Certified B-BBEE certificate or sworn affidavit signed by a Commissioner of Oaths; joint ventures must submit a consolidated certificate or sworn statement.
Valid tax clearance certificate or SARS PIN.
CSD registration report.
Financial statements for the past three years.
Proof that municipal rates, taxes or service charges are not in arrears for more than three months, or a lease agreement signed by both lessor and lessee.
SHERQ regulations.
Valid COIDA certificate from the Department of Labour or another authorised entity.
Proof of valid Electrical Contractor Registration with the Department of Labour.
Priced bill of quantities covering every item.
Disqualification risks
Missing or unsigned returnable documents.
Failure to submit mandatory COIDA or Electrical Contractor Registration proof.
Failure to price every bill of quantities item.
Late submission or submission by an unaccepted channel.
False declaration of interest or undisclosed conflict.
Evaluation Criteria
Source: Bid Document 2670GS.pdf (TENDER)
Evaluation method
Method 2: financial offer and preferences.
Bids are first checked for responsiveness and eligibility.
Price is scored out of 90 using the 90/10 preference point system.
The lowest acceptable comparative price receives the highest price score.
Preference points
Specific goals listed: enterprise owned by black people with at least 51% shareholding; enterprise owned by black women with at least 30% shareholding; local suppliers within the City of Johannesburg geographical area.
The tender allocates 4 points to black-owned enterprises with at least 51% shareholding and 2 points to local suppliers within the City of Johannesburg.
Bidders must indicate the points claimed for each preference goal.
Eligibility conditions for acceptance
Valid tax clearance certificate or SARS PIN.
Registration on the Central Supplier Database.
No arrears of more than three months for municipal rates, taxes or service charges.
Not listed on the Register of Tender Defaulters.
No abuse of the employer's supply chain management system.
No failed previous contract with written notice.
Declaration of interest completed with no conflict affecting performance.
No restriction preventing the bidder or its principals from doing business with the employer.
Award
City Power may appoint a maximum of four bidders.
The employer may reject any offer or cancel the process before contract formation.
Technical Specifications
Source: Bid Document 2670GS.pdf (TENDER)
Scope
Maintenance of substations, switching yards and servitudes for City Power Johannesburg (SOC) Ltd.
Pricing requirement
Bidders must price all items in the bill of quantities.
Failure to quote on all bill of quantities items makes the bid non-responsive.
Contract form
The successful bidder must complete and sign the written contract form MBD 7.
Experience & Qualifications
Source: Bid Document 2670GS.pdf
Bidders must demonstrate the professional and technical qualifications, competence, financial resources, equipment, managerial capability, reliability, experience, reputation, expertise and personnel needed to perform the contract. Proof of valid Electrical Contractor Registration with the Department of Labour is mandatory.
Pricing Schedule
Source: Bid Document 2670GS.pdf
Pricing is submitted on MBD 3.1 for firm prices and MBD 3.2 for non-firm prices, supported by a bill of quantities. Every bill of quantities item must be priced. Prices must be fixed, stated in Rand, and show VAT separately. Payment is 30 days from receipt of a valid invoice and statement of account.
Financial Requirements
Source: Bid Document 2670GS.pdf (TENDER)
Pricing format
Pricing is submitted on the bill of quantities using MBD 3.1 for firm prices and MBD 3.2 for non-firm prices.
Prices must be fixed for the contract duration.
Rates and prices must be in Rand.
VAT must be shown separately from the tendered total.
All duties, taxes and levies other than VAT must be included in the rates and prices.
Contract price
The purchase price is the amount set out in the purchase order.
Unless otherwise stipulated, no additional costs are payable.
Contract data treats VAT and other taxes as included in the purchase price unless otherwise stated.
Payment terms
Payment is 30 days from receipt of a valid invoice and statement of account.
The supplier must elect payment by cheque or electronic funds transfer within 14 days of a purchase order being awarded.
The election must be in writing to City Power's Financial Department; if no election is made, payment is by cheque.
Invoices must comply with the VAT Act and be sent to the Financial Department, P.O. Box 38766, Booysens, 2016.
Monthly statements must be submitted by the 10th day of the month following delivery.
Financial capacity
Financial statements for the past three years must be submitted.
Compliance Requirements
Source: Bid Document 2670GS.pdf (TENDER)
Registration and tax
CSD registration report required.
Valid tax clearance certificate or SARS PIN required.
If no tax compliance status is available but the bidder is registered on CSD, the CSD number must be provided.
Each consortium, joint venture or subcontractor party must provide its own tax clearance certificate, PIN or CSD number.
Foreign suppliers must complete the foreign supplier questionnaire unless they meet the stated RSA tax presence conditions.
B-bbee
Certified B-BBEE certificate or sworn affidavit signed by a Commissioner of Oaths.
Joint ventures must submit a consolidated certificate or sworn statement.
Failure to attach the B-BBEE certificate or affidavit results in no preference points.
Specific goals include black ownership of at least 51%, black women ownership of at least 30%, and local suppliers within the City of Johannesburg.
CIDB and construction compliance
CIDB Standard Conditions of Tender, August 2019, apply.
Statutory and safety
Valid COIDA certificate required.
Proof of valid Electrical Contractor Registration with the Department of Labour required.
Municipal rates, taxes or service charges must not be in arrears for more than three months, or a signed lease agreement must be provided.
Declarations
MBD 4 declaration of interest.
MBD 8 declaration of past supply chain management practices.
MBD 9 certificate of independent bid determination.
MBD 6.2 local content declaration.
No bids from persons in the service of the state.
Health & Safety
Source: Bid Document 2670GS.pdf
A valid COIDA certificate from the Department of Labour or another authorised entity is mandatory. SHERQ regulations must be submitted.
Contractual Terms
Source: Bid Document 2670GS.pdf
Contract formation
The successful bidder must sign the written contract form MBD 7.
The contract includes the bidding documents, pricing schedules, technical specifications, preference claims, declarations and special conditions.
Price and payment
The purchase price is the amount set out in the purchase order.
No additional costs are payable unless stipulated in the purchase order.
Contract data treats VAT and other taxes as included in the purchase price unless otherwise stated.
Payment is 30 days after receipt of a valid invoice and statement of account.
The supplier must elect cheque or electronic funds transfer in writing within 14 days of the purchase order.
Invoices and monthly statements must contain the required details and be sent to the Financial Department.
Other obligations
If an alternative offer is accepted, the bidder becomes fully responsible for meeting the employer's standards.
Securities, bonds, guarantees, policies and insurance certificates may be required before contract formation.
The employer may reject any offer or cancel the tender process before contract formation.
Section
Source: Bid Document 2670GS.pdf
Price and preference scoring
90/10 preference point system.
90 points are available for price.
Specific goals include black ownership of at least 51%, black women ownership of at least 30%, and local suppliers within the City of Johannesburg.
The tender allocates 4 points to black-owned enterprises with at least 51% shareholding and 2 points to local suppliers within the City of Johannesburg.
Responsiveness and correction
Bids must be complete, signed and free of material deviations.
Non-responsive bids cannot be made responsive later.
Arithmetical errors may be corrected according to the stated rules.
Clarification may be requested without changing the competitive position.
DocumentFINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdfReview complete
Description
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf
Purpose and scope
Sets minimum maintenance standards for City Power switching yards, substation yards and transmission servitudes.
Addresses poor network performance caused by foliage interference, vandalised earthing, faulty isolators and faulty surge arrestors.
Standardises contractor maintenance services to support contractor selection, performance appraisal and price-list normalisation.
Covers maintenance of switching yards, substation yards and transmission servitudes.
Normative references include CP_TSSTAN_033, Occupational Health and Safety Act, NEMA, National Forest Act, biodiversity and land standards, ISO 9001:2015, ISO 45001:2018, ISO 14001:2015 and the Electrical Machinery Regulations.
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf (unknown)
Technical contact for corrections
Contact: Technical Support - Chief Engineer
Organisation: City Power Johannesburg (Pty) Ltd
Postal address: P O Box 38766, Booysens, 2016
Technical Specifications
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf (unknown)
Scope
Maintenance of City Power switching yards, substation yards and transmission servitudes, including foliage control near overhead lines.
Planned preventative horticultural work: shrub and tree uprooting, hedge cutting, lawn mowing and edging, weeding, and use of biodegradable, environmentally friendly herbicides.
Substation and switching-yard upkeep: roads and pathways, boundary walls and fences, lawns and rough grass, tree protection orders where applicable, stone maintenance, weed removal from yards and paving, painting of steel structures, repair or maintenance of HV links and surge arrestors, and earthing maintenance with earth-integrity testing.
Contractor supplies materials and consumables.
Access and site conduct
Work only under an issued City Power permit.
Remain on existing roads and tracks and within the servitude area.
Provide before-and-after photographs.
Barricade and sign work areas inside yards.
Keep City Power gates locked and leave property owners' gates as found.
Do not interfere with property owners, make fires, litter, drop fences, collect firewood without consent, or remove stones/rock.
Provide appropriate mobile toilet facilities.
City Power official signs off completion.
Overhead line and clearance requirements
Inspect overhead lines according to the maintenance planning strategy; report required foliage clearance to the maintenance team leader for a work order.
Urgent foliage-clearing requests must include pole number or street address and be sent to the maintenance team leader or area depot.
Clearance dimensions depend on voltage, conductor construction, span length, sag, wind sway and expected tree movement.
Minimum foliage trimming clearances: >22 kV to 66 kV bare conductor: 2.0 m, 2.0 m, 3.0 m and 4.0 m across the stated pole/span and urban/bushfire-risk categories; >66 kV to 88 kV: 3.0 m, 3.0 m, 4.0 m and 5.0 m; >88 kV to 275 kV: 4.0 m, 4.0 m, 5.0 m and 5.0 m; around supports and stay wires: 2.0 m.
Tower line foliage safety clearances: feeder conductors and earth wires: 6.0 m at tower and 6.0 m along middle 2/3 of span for spans <200 m; 6.0 m and 7.0 m for 200-400 m; 6.0 m and 8.0 m for >400 m; steel towers: 11.0 m from tower centre line.
Trim foliage that encroaches or is likely to encroach within the one-year growing/inspection cycle; remove foliage where needed for access to structures.
All species under power lines must be cut.
Grass cutting and reed management may be required for tower line servitudes.
Equipment and tools
Machinery and equipment must be safe, maintained, operated by authorised trained workers, fitted with guards and safety devices, switched off when not in use, and isolated before adjustment, cleaning or maintenance.
Trailing cables and hoses must be kept short and must not create hazards.
Contractor must inspect and maintain its tools, equipment and PPE.
Bill of quantities
Supply and install items: gantry bracing members (kg), base plates (kg), switchyard/station stones (kg), biodegradable herbicide (kg), earthing conductor (m), surge arrestors from 6.6 kV to 275 kV (each), isolator male and female knife contacts and arcing horns (each), electrical and manual link boxes (each), HV bird spikes (each), concrete slabs (each).
Anti-vandalism break-away nuts and bolts: 16 mm, 20 mm and 24 mm (each).
Miscellaneous: uprooting trees under lines and inside switching yards (each), foliage removal (m2), greasing links and link boxes (each), galvanising structures (litre), phase colour coding (each).
Emergency call-out fee: per event during normal working hours and per event after normal working hours.
Prime cost sum for special material (each).
Estimated quantity is shown as 1 for each listed item.
Quality Management
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf
Quality management
Contractor must establish a quality management system covering installation, removal, transportation and disposal; ISO 9001:2015 may guide the system and details are agreed with the purchaser.
Monthly incident and accident statistical reports must be submitted to the City Power responsible official and copied to the relevant Risk Co-ordinator/Practitioner.
Reports must cover fatal incidents, diagnosed occupational diseases, disabling injuries, medical incidents, first-aid incidents, electrical contact incidents, public incidents, vehicle incidents, environmental incidents, damage incidents and near-miss incidents.
Corrective actions and recommendations must be followed up to assess effectiveness.
Damage to City Power or contractor buildings, structures, vehicles, equipment or the environment must be reported and investigated promptly.
Foliage clearance must meet the stated clearance dimensions and the one-year inspection cycle.
Financial Requirements
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf (unknown)
Pricing basis
Rates are required for each bill-of-quantities item, with estimated quantities shown as 1.
Pricing covers supply and installation items, miscellaneous maintenance items, emergency call-out fees and a prime cost sum for special material.
Emergency call-out fees must be priced per event for normal working hours and per event after normal working hours.
Compliance Requirements
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf (unknown)
Compliance obligations
Work must be performed under an issued City Power permit and within the servitude or existing road/track limits.
Tree cutting and foliage clearance may only be done by personnel with relevant accredited training.
Commercial herbicide application must be supervised by a registered pest control operator; a daily herbicide-use register must be kept and a copy given to City Power.
Work within safety clearance of MV/HV overhead lines requires isolation, testing and earthing in line with CP_TSSTAN_033; pylons must not be climbed to clear foliage.
Risk assessments, health and safety records, first-aid provision, safety induction, warning signage and incident reporting are mandatory.
Environmental controls include no burning, protection of sensitive areas, appropriate disposal of cut foliage and use of biodegradable herbicides.
Quality, health and safety, and environmental management plans aligned to ISO 9001:2015, ISO 45001:2018 and ISO 14001:2015 are required, with details agreed with City Power.
Health & Safety
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf
Health and safety
Contractor must implement a health and safety plan aligned with ISO 45001:2018 and City Power requirements.
Full PPE is required: safety boots, hard hat, overalls, full-length leather gloves/gauntlets, eye/face protection, leg protection, safety harness and earmuffs.
No work may start without a prior risk assessment; the record must be kept in the health and safety file or project file.
Only personnel with relevant accredited training may perform tree cutting and foliage clearance.
Transmission and foliage management must be notified and approval obtained before foliage control work.
Work near MV/HV overhead lines requires isolation, testing and earthing per CP_TSSTAN_033; pylons must not be climbed to clear foliage.
Certified first aider(s) must be on site; first-aid boxes must meet General Safety Regulations and contain only first-aid material.
Hazardous chemical substances require exposure assessment, employee training and PPE; herbicide application must be supervised by a registered pest control operator and recorded in a daily register.
Employees must receive OHS Act, regulatory and environmental-legislation information, hazard awareness, safe-work instruction and training in a language they understand.
Compulsory site safety induction is required before work; safety signs must be displayed; new legislation/standards must be communicated.
Incidents, accidents and diseases must be reported to authorities and to the City Power responsible official within 24 hours; monthly statistics and investigations are required.
Site inspections, toolbox talks and task risk assessments are required before work; the public and surrounding community must be made aware of hazards and signage must be posted.
Environmental
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf
Environmental management
Contractor must implement an environmental management plan aligned with ISO 14001:2015 and City Power SHERQ Policy.
Work must comply with NEMA, the National Forest Act and relevant biodiversity/land standards.
Herbicides must be biodegradable and environmentally friendly; use must be controlled and recorded.
Burning of cut foliage is prohibited.
Deep valleys, environmentally sensitive areas and legally protected areas must not be cleared if the foliage does not threaten safe and reliable substation operation.
Retained vegetation, natural features and topsoil must be protected.
Cut foliage must be removed or disposed of as agreed with property owners/City Power.
Environmental incidents must be reported and investigated.
Contractual Terms
Source: FINAL DRAFT 001 CP_NISSP_002 Standard for Mainatenance of Switching yards Substation yards and Transmission Servitudes.pdf
Contractor obligations
Provide comprehensive maintenance across substations and switching yards, including roads and pathways, boundary walls and fences, lawns and open areas, tree protection orders, stone maintenance, weed removal, painting of steel structures, HV link and surge arrestor repair, and earthing/earth-integrity testing.
Supply materials and consumables.
Do not clear foliage in deep valleys, environmentally sensitive areas or legally protected areas where the foliage does not threaten safe and reliable substation operation.
Protect retained trees, shrubs, grass, natural features and topsoil.
Confirm with property owners whether cut foliage is to be retained; if not, remove or dispose of it appropriately.
Burning is prohibited.
DocumentBid Advert (009).pdfReview complete
Description
Source: Bid Advert (009).pdf
Scope: maintenance of substations, switching yards and servitudes for City Power Johannesburg (Pty) Ltd.
Bid documents: available from www.etenders.gov.za and www.citypower.co.za.
Key dates: advertised 18 November 2026; closes 28 January 2027 at 11:00.
Submission method: sealed bid lodged in the tender box at 40 Heronmere Road, Reuven, Booysens (Tender Advice Centre).
E-mailed or faxed bids are not accepted.
Closing: 28 January 2027 at 11:00.
Bid documents: available from www.etenders.gov.za and www.citypower.co.za.
Returnables:
Valid COIDA certificate from the Department of Labour or another authorised entity.
Proof of valid Electrical Contractor Registration with the Department of Labour.
Completed Bill of Quantities with a price against every listed item.
Disqualification risks:
Any BOQ item left unpriced renders the bid non-responsive and it will be disqualified.
Evaluation Criteria
Source: Bid Advert (009).pdf (TENDER)
Evaluation stages:
Functionality: total score 100%; minimum qualifying score 85%.
Price: 90 points.
Specific goals (B-BBEE): 10 points.
Specific goals points:
Enterprise at least 51% black-owned: 4 points; below 51%: 0 points.
Enterprise at least 30% black women-owned: 4 points; below 30%: 0 points.
Local supplier within the City of Johannesburg geographical area: 2 points; outside: 0 points.
Awards: a maximum of 4 bidders will be appointed.
Technical Specifications
Source: Bid Advert (009).pdf (TENDER)
Scope: maintenance of substations, switching yards and servitudes for City Power Johannesburg.
Pricing basis: every item on the Bill of Quantities must be priced.
The full scope is set out in the bid documents available from the websites listed above.
Pricing Schedule
Source: Bid Advert (009).pdf
No separate priced schedule appears in this section; it carries the specific-goals evidence requirements:
Black-owned enterprise (at least 51% shareholding): original or certified copy, not older than 3 months, of the BBBEE certificate, affidavit or consolidated B-BBEE certificate from the verification agency where the bidder is a JV/consortium, plus certified ID copies of the owners not older than 3 months.
Black women-owned enterprise (at least 30% shareholding): the same certified copies.
Local supplier within the City of Johannesburg geographical area: municipal rates account or lease agreement.
Financial Requirements
Source: Bid Advert (009).pdf (TENDER)
Pricing format: prices must be provided for all items specified on the Bill of Quantities; failure to quote on every item makes the bid non-responsive and it will be disqualified.
Compliance Requirements
Source: Bid Advert (009).pdf (TENDER)
Mandatory:
Valid COIDA certificate from the Department of Labour or another authorised entity.
Proof of valid Electrical Contractor Registration with the Department of Labour.
B-BBEE evidence for specific goals:
Original or certified copy, not older than 3 months, of the BBBEE certificate, affidavit or consolidated B-BBEE certificate; JV/consortium bidders must provide the certificate from the verification agency.
Certified copies of the owners' IDs, not older than 3 months.
Ownership thresholds for points: at least 51% black ownership, or at least 30% black women ownership.
Local supplier evidence:
Municipal rates account or lease agreement confirming the supplier falls within the City of Johannesburg geographical area.
Section
Source: Bid Advert (009).pdf
Functionality stage: scored out of 100%; minimum threshold 85%.
Price stage: 90 points.
Specific goals (B-BBEE) stage: 10 points, allocated as follows:
At least 51% black ownership: 4 points; below 51%: 0 points.
At least 30% black women ownership: 4 points; below 30%: 0 points.
Supplier within the City of Johannesburg geographical area: 2 points; outside: 0 points.
Number of awards: a maximum of 4 bidders.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.