The quality council for trades and occupations (qcto) invites bids for the supply, delivery and configuration of backup storage and a backup server blade. The contract is awarded on a 100-point system, with 80 points for price and 20 points for specific goals (black, youth and women ownership). Bidders must submit proof of claimed specific goals with their tender or forfeit those points.
Key Requirements
Closing date: 11 December 2026 at 09:00 (time zone not stated; confirm with QCTO).
Submission method and address: not stated in the available document.
Preference point system: 80/20 or 90/10; the applicable system for this tender is not specified.
Price points: 80; Specific goals points: 20 (total 100).
Specific goals: Black ownership ≥50% = 10 points; Youth ownership ≥50% = 5 points; Women ownership ≥50% = 5 points. Claims below 50% score 0.
Proof of specific goals must accompany the tender (e.g., B-BBEE certificate, affidavit, ID copy, share certificate, CSD report). Failure to submit proof means no preference points for those goals.
Fraudulent claims may lead to disqualification, recovery of costs, contract cancellation, restriction from state business for up to 10 years, and criminal prosecution.
Professional Services & Consulting Industry Profile
Regulatory Bodies
SAGCSAICA
Tenders in this industry often require registration with these bodies.
Typical Documents
5 items
Company Registration (CIPC)
Tax Clearance Certificate
B-BBEE Certificate
CSD Registration
Company Profile
Recommended Certifications
Having these can improve your winning chances: CA(SA) - Chartered Accountant, PMI-PMP (Project Management Professional), Prince2 Practitioner, Six Sigma Certification
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
DocumentToR BACKUP STORAGE SEVER BLADE 10-2026.pdfReview complete
Description
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf
Important Dates
20 Nov
2026
Tender published
Tender Published
Tender was published
11 Dec
2026
Submission deadline
Closing Date
Tender closing date
Procurement Rules & Compliance ContextThis tender may be governed by South African public procurement rules covering fairness, transparency, preferential procurement, anti-corruption, administrative justice and access to information.
7 rules
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
Core procurement rules
These rules commonly apply to South African public-sector procurement.
7
Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
high
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Constitution of the Republic of South Africa, 1996 – Section 217
Act 108 of 1996 (s217)
high
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Supply, delivery and configuration of backup storage and a backup server blade for the Quality Council for Trades and Occupations in Gauteng. The appointed service provider will be responsible for the full scope including configuration.
The Quality Council for Trades and Occupations (QCTO) requires the supply, delivery, installation and configuration of an enterprise-grade backup server blade and backup storage device, optimised for Veeam backup workloads, to replace its current backup server and achieve a 3-2-1 backup strategy. The solution must protect on-premises and cloud environments, and the contract runs for a maximum of two months.
The Quality Council for Trades and Occupations requires a service provider for the supply, delivery and configuration of backup storage and a backup server blade. The tender uses the 80/20 preference point system, with 80 points for price and 20 points for specific goals (Black, Youth, and Women ownership).
The Quality Council for Trades and Occupations requires a service provider for the supply, delivery and configuration of backup storage and a backup server blade. The bid is subject to the Preferential Procurement Policy Framework Act and the General Conditions of Contract.
Supply, delivery and configuration of backup storage and a backup server blade for the Quality Council for Trades and Occupations in Gauteng. Bidders must submit a priced proposal using the professional services pricing schedule, including ceiling price, rates, and phase costs.
The Quality Council for Trades and Occupations requires a service provider for the supply, delivery and configuration of backup storage and a backup server blade. The contract is governed by the General Conditions of Contract (GCC) for government procurement, which set out standard terms for delivery, warranty, payment, and termination.
Supply, delivery and configuration of backup storage and a backup server blade for the Quality Council for Trades and Occupations, based in Gauteng. Bidders must provide a team CV template for each role, with experience and references relevant to the role.
Supply, delivery and configuration of backup storage and a backup server blade for the Quality Council for Trades and Occupations (QCTO), under tender reference QCTO 10-2026. The contract includes hardware, software, licensing, installation and configuration, with pricing submitted on Annexure B1.
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Publication of Names of Bidders in Respect of Advertised Competitive for the Appointment of a Specialist Quality Control Inspectorate (QCI) Service Provider for a Period of six (06) years.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
QCTO requires a service provider to supply, deliver and configure an enterprise-grade backup server blade and backup storage for Veeam backup workloads.
The solution must provide data protection and recovery for both on-premises and cloud environments.
The existing Veeam backup server must be replaced and backup storage added so that a 3-2-1 backup strategy and full data archiving are achieved.
QCTO operates from Hatfield, Pretoria, with approximately 120 staff.
Current on-premises estate: 4 HPE ProLiant DL380 Gen 10 hosts (118 physical CPU cores) on Microsoft Hyper-V, 17 virtual machines (75 logical CPU cores), 2 NAS devices (50 TB and 24 TB) and 1 HP SAN (24 TB).
Cloud estate: Microsoft Office 365 Exchange Online and 7 Microsoft Azure virtual machines.
Detailed specifications and quantities are set out in Annexure B.
Important Dates
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf (TENDER)
Closing: 11 December 2026 at 11:00
Compulsory site briefing: 26 November 2026, 12:00 to 13:00, QCTO Offices, 256 Glyn Street, Hatfield, Pretoria — attendance is compulsory
Inception meeting, approval of project plan and signing of the SLA: January 2027
Final handover report: at the end of the project
Bid validity: 180 days
Contact Information
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf (TENDER)
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf (TENDER)
Submission method and address
Deliver by hand to the QCTO Tender Box at Reception, 256 Glyn Street, Hatfield, Pretoria, 0083.
Closing time: 11:00 on 11 December 2026. The bid box closes at exactly that time; late bids are returned unopened and are not considered.
Paginate and index the bid, and initial every page in black ink.
Copies and packaging
Four hard copies of the technical bid, including the completed terms of reference document, initialled by authorised signatories.
One USB containing the technical bid document.
Pricing submitted separately: one completed SBD 3.3 with Annexure B1, sealed in an envelope marked PRICING.
Returnable documents
SBD 1 (Invitation to Bid): bidder identification and contact details, signed as the offer.
SBD 3.3 (Pricing Schedule): priced offer, submitted with Annexure B1.
SBD 4 (Declaration of Interest): discloses state employment or connections of directors, shareholders or members.
SBD 6.1 (Preference Points Claim): claims points for the specific goals.
Annexure B: summary of experience, on the supplied template.
Annexure B1: costing and price schedule, on the supplied Excel template.
Proof of CSD registration with the MAAA number reflected on SBD 1, plus the CSD report; subcontractors must also provide CSD proof.
Tax compliance evidence.
The published terms of reference document, including its annexures.
Disqualification risks
Late delivery.
Any mandatory document missing or unsigned.
Pricing totals that differ between SBD 1, SBD 3.3 and Annexure B1.
Pricing bid omitted or containing calculation errors.
Failure to answer a written request for clarification within 48 hours.
Evaluation Criteria
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf (TENDER)
Evaluation stages
Mandatory compliance — documents must be signed by an authorised representative; any omission disqualifies the bid.
Functionality — scored out of 100; only bidders meeting the threshold proceed.
Price and specific goals — 80/20 preference point system under the PPPFA.
Minimum qualifying score: 80/100 on functionality. Bidders scoring below 80 are disqualified and are not evaluated on price or specific goals.
Functionality scoring (100 points)
Company experience: 25 points — 3 or more contactable references or completion certificates from the past 7 years = 25; 2 references = 20; fewer than 2 = 0. Letters must be dated, signed, on the client's letterhead, describe the service, carry a recommendation and give a contactable reference person.
Technical Project Manager qualification (Microsoft MCSE: Cloud Platform for Hyper-V and HPE ASE Server Solutions): 5 points for all certificates, 0 otherwise.
Technical Project Manager experience (7+ years deploying or supporting HPE ProLiant DL/ML Gen8–Gen12): 5 points for 7 years, 0 for less.
Server & Virtualization Specialist qualification (Microsoft MCSE: Cloud Platform for Hyper-V and HPE ASE Server Solutions): 10 points for certification, 0 otherwise.
Server & Virtualization Specialist experience (7+ years HPE ProLiant DL/ML Gen8–Gen10): 10 points for 7 years, 0 for less.
Storage Engineer qualification (HPE ASE Certification): 10 points, 0 without.
Storage Engineer experience (7+ years with HPE MSA/P2000 SANs, RAID, SSD, FC/iSCSI): 10 points for 7 years, 0 for less.
Proposed approach and methodology: 20 points — 20 if it addresses the brief and adds value beyond the stated objectives; 10 if aligned to the purpose and objectives; 5 if partially aligned; 0 if not aligned.
Detailed project plan with risk mitigation for critical outages: 5 points if it demonstrates understanding of scope and sound project and risk management; 3 if it does not fully; 0 if none submitted.
Price and specific goals (100 points)
Price: 80 points. The lowest acceptable bid scores 80; higher bids score pro rata under the prescribed formula for bids below R50 000 000 (all taxes included).
Specific goals: 20 points — women holding at least 50% directorship or control = 5; youth aged 16 to 35 holding at least 50% = 5; Black owners or directors holding at least 50% = 10. No certificate or affidavit means 0 points for that goal.
Where a B-BBEE certificate is used, the full verification report showing black ownership, women, youth and locality percentages must be submitted.
Due diligence
QCTO may verify information, interview customer references and visit premises; bidders must cooperate and respond within the timeframes set.
Written requests for clarification must be answered within 48 hours or the bid is disqualified.
Technical Specifications
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf (TENDER)
Scope
Supply, deliver, install, configure and commission an enterprise-grade backup server blade and backup storage for Veeam workloads at QCTO premises.
The solution must protect and recover data across the on-premises and cloud environments and support a 3-2-1 backup strategy.
Scope covers hardware deployment, system configuration, integration, testing and handover of a fully operational Veeam backup environment.
Equipment
2 × HPE ProLiant Gen 12 servers.
1 × 150 TB backup storage system.
Server specification
2U rack server, latest generation.
2 × Intel Xeon 6 Scalable processors.
256 GB DDR5 ECC RAM minimum.
4 × SSD in RAID 10 with Smart Array / Gen5 RAID controller.
Dual-port 10/25GbE SFP+ networking minimum.
VMware ESXi (latest supported version).
VM 1: 12 vCPU, 132 GB RAM.
iLO 7 Silicon Root of Trust, secure firmware, zero-trust architecture.
Dual redundant hot-plug PSU (800W–1000W).
Storage specification
1 × 2U all-flash storage system with dual active-active controllers.
Inline deduplication and compression with at least 5:1 data reduction.
Backup performance of at least 70 TB/hour.
Fully redundant architecture.
Must support Veeam Backup & Replication.
Licences and configuration
Supply Windows Server 2025 Standard, Veeam backup, VMware ESXi and Veeam One licences.
Configure repositories, performance tiers and immutability where supported.
Apply best practice for backup performance, security and storage efficiency.
Implement backup immutability where supported and role-based access control.
Current environment
4 physical HPE ProLiant DL380 Gen 10 hosts, 118 physical CPU cores, running Microsoft Hyper-V.
17 virtual machines with 75 logical CPU cores.
2 NAS devices (50 TB and 24 TB) and 1 HP SAN (24 TB).
Microsoft Office 365 Exchange Online and 7 Microsoft Azure virtual machines.
Deliverables and timeframes
Inception meeting, approved project plan and SLA signing: January 2027.
Final handover report: at the end of the project.
Performance is reviewed weekly and QCTO may terminate the contract for non-performance.
Methodology
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf
Documents required with the bid
Proposed methodology and approach showing alignment to the purpose and objectives of the project.
Detailed project plan, including a risk mitigation plan for critical outages, demonstrating understanding of the scope and sound project and risk management.
CVs of proposed team members on the supplied template, with certified copies of qualifications.
Annexure B summary of experience on the supplied template.
Annexure B1 pricing schedule on the supplied Excel template.
Methodology scoring
20 points: methodology addresses the brief and adds value beyond the original purpose and objectives.
10 points: approach aligned to the purpose and objectives.
5 points: partially aligned to the purpose and key deliverables.
0 points: not aligned.
Project plan scoring
5 points: plan demonstrates understanding of scope and good project and risk management.
3 points: plan does not fully demonstrate this.
0 points: no plan submitted.
Experience & Qualifications
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf
Company experience
Minimum 7 years in server and storage support.
Contactable references or project completion certificates for 3 or more projects from the past 7 years (2019–2026).
Reference letters must be on the client's letterhead, dated and signed, state the service provided, include a recommendation or comment, and give the contact person's name, surname, position and contact number.
Experience is assessed on the number, type, scope and geographical spread of similar projects; QCTO may contact referees without notice.
Use Annexure B to summarise qualifications, skills and experience.
Team requirements
Technical Project Manager: Microsoft MCSE: Cloud Platform (Hyper-V) and HPE ASE (Server Solutions); 7+ years deploying and supporting HPE ProLiant DL/ML Gen8–Gen12.
Server & Virtualization Specialist: Microsoft MCSE: Cloud Platform (Hyper-V) and HPE ASE (Server Solutions); 7+ years HPE ProLiant DL/ML Gen8–Gen10.
Storage Engineer: HPE ASE Certification; 7+ years with HPE MSA/P2000 SANs (RAID, SSD, FC/iSCSI).
Each proposed team member must provide a detailed CV with qualifications, experience and contactable references, plus certified copies of all qualifications.
Team members must be available for the whole project and play a meaningful role; replacements require consultation with QCTO and equivalent qualifications and experience.
QCTO may verify qualifications with SAQA and experience with third parties.
Pricing Schedule
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf
Pricing submission
Complete SBD 3.3 and Annexure B1 using the supplied Excel template.
Submit the completed SBD 3.3 and Annexure B1 together in one envelope marked PRICING.
Rates must include all applicable taxes and VAT and cover delivery of every output in the terms of reference.
Show the bid price including VAT for each year on Annexure B1.
The total bid price including VAT must match on SBD 1, SBD 3.3 and Annexure B1; mismatches disqualify the bid.
Missing pricing or calculation errors invalidate the bid and cause immediate disqualification.
QCTO provides no upfront payments.
Financial Requirements
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf (TENDER)
Pricing
Price the bid on SBD 3.3 and Annexure B1, using the supplied Excel template.
Rates must be inclusive of all applicable taxes and VAT, and fully inclusive of delivering every output in the terms of reference.
Show the bid price including VAT for each year on Annexure B1.
The total bid price including VAT must be identical on SBD 1, SBD 3.3 and Annexure B1; any difference disqualifies the bid.
Submit the completed SBD 3.3 and Annexure B1 together in one envelope marked PRICING.
Omitted pricing or calculation errors invalidate the bid and cause immediate disqualification.
Payment
QCTO makes no upfront payments.
Price scoring
Price carries 80 of the 100 preference points; the lowest acceptable bid scores 80 and higher bids score pro rata under the prescribed formula for bids below R50 000 000 (all taxes included).
Bid validity
180 days.
Contract
Maximum contract duration of two months, subject to annual appraisal and confirmation of compliance.
Financial penalties apply as determined in the Service Level Agreement.
Compliance Requirements
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf (TENDER)
Mandatory eligibility and registration
Registered on the National Treasury Central Supplier Database (CSD), with the MAAA number shown on SBD 1 and the CSD report attached; subcontractors must also provide CSD registration proof.
Valid tax compliance status (SARS tax compliance status or tax pin).
Valid Letter of Good Standing for COIDA.
Proof of company or close corporation registration, with CM/CK certificates.
Copies of identity documents of all equity holders or shareholders.
Original Equipment Manufacturer (OEM) certificate for the server and storage hardware offered.
Partnership, close corporation or company bidders must submit a certificate showing the names, identity numbers and addresses of partners, members or directors.
B-BBEE and specific goals
Points are claimed on SBD 6.1 for specific goals: women holding at least 50% directorship or control (5 points), youth aged 16 to 35 holding at least 50% (5 points), Black owners or directors holding at least 50% (10 points).
Claims must be supported by a certificate or affidavit; unsupported claims score zero.
Where a B-BBEE certificate is used, submit the full verification report showing black ownership, women, youth and locality percentages.
Experience and team
Minimum 7 years of company experience in server and storage support.
Contactable references or completion certificates for 3 or more projects delivered between 2019 and 2026, on client letterheads, signed and dated, describing the service and giving a contactable reference person.
CVs of proposed team members on the supplied template, with certified copies of all qualifications.
Technical Project Manager: Microsoft MCSE: Cloud Platform (Hyper-V) and HPE ASE (Server Solutions); 7+ years deploying or supporting HPE ProLiant DL/ML Gen8–Gen12.
Server & Virtualization Specialist: Microsoft MCSE: Cloud Platform (Hyper-V) and HPE ASE (Server Solutions); 7+ years HPE ProLiant DL/ML Gen8–Gen10.
Storage Engineer: HPE ASE Certification; 7+ years with HPE MSA/P2000 SANs (RAID, SSD, FC/iSCSI).
Team members must be available for the project duration and may only be replaced with QCTO's agreement and with equivalent qualifications and experience.
QCTO may verify qualifications with SAQA and experience with third parties.
Consortia and joint ventures
Each member entity must meet all mandatory requirements; failure disqualifies the bidding unit.
Submit a signed consortium agreement binding on all members, a bid document signed by all members, and written authorisation naming the lead member, who alone may communicate with and receive instructions from QCTO.
Other
The General Conditions of Contract must be accepted.
A proposed methodology and a detailed project plan with risk mitigation for critical outages must be submitted.
Contractual Terms
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf
Contract and SLA
The successful bidder must sign a Service Level Agreement with QCTO; the SLA is the sole document governing the relationship and no other agreement may override it.
Contract duration: maximum two months, subject to annual appraisal and confirmation of compliance.
The SLA covers the agreement period, pricing conditions, changes to the proposed team, communication and reporting, non-performance, financial penalties and termination, payment procedures, management reports, deliverables, reviews, uncompleted work, confidentiality and disputes.
The General Conditions of Contract must be accepted and QCTO may apply the remedies it provides.
Obligations and risk
QCTO will provide the data and information needed to perform the services.
All information, documents, programmes, advice and reports produced under the contract become QCTO's property; copyright vests in QCTO and nothing may be reproduced or distributed without written consent.
All such material is confidential and may not be shared with unauthorised parties without written consent.
On termination, all documents, programmes and reports must be handed to QCTO, with no right of retention.
The service provider is liable for loss or damage to assets during the contract period.
The provider's officials must be available for court, internal disciplinary and arbitration proceedings when required.
Financial penalties apply as determined in the SLA.
The provider must be able to work alongside other service providers.
QCTO may accept the offer in whole or in part and is not bound to accept the lowest or any bid.
Section
Source: ToR BACKUP STORAGE SEVER BLADE 10-2026.pdf
Sequence
Mandatory compliance is checked first; only compliant bids move to functionality.
Functionality is scored out of 100 and the minimum qualifying score is 80.
Bids below 80 are disqualified and are not considered for price and specific goals.
Qualifying bids are then scored on the 80/20 preference point system under the PPPFA.
Functionality breakdown (100 points)
Company experience: 25 (3 or more references = 25; 2 references = 20; fewer than 2 = 0).
Technical Project Manager qualification: 5.
Technical Project Manager experience: 5.
Server & Virtualization Specialist qualification: 10.
Server & Virtualization Specialist experience: 10.
Storage Engineer qualification: 10.
Storage Engineer experience: 10.
Proposed approach and methodology: 20 (20 / 10 / 5 / 0 depending on alignment and added value).
Detailed project plan: 5 (5 / 3 / 0).
Price and specific goals (100 points)
Price: 80 points, lowest acceptable bid scoring 80 and others pro rata under the prescribed formula for bids below R50 000 000 (all taxes included).
Specific goals: 20 points — women at least 50% = 5; youth aged 16 to 35 at least 50% = 5; Black ownership or directorship at least 50% = 10.
Unsupported specific goal claims score zero; B-BBEE certificate claims require the full verification report showing black ownership, women, youth and locality percentages.
Verification
QCTO may request clarification or verification in writing; bidders must respond within 48 hours or be disqualified.
QCTO may conduct due diligence, including interviewing references and visiting premises.
Source: Standard Bidding Document (SDB) 4.pdf (TENDER)
Department: SUPPLY CHAIN MANAGEMENT
Submission Guidelines
Source: Standard Bidding Document (SDB) 4.pdf (TENDER)
Returnable documents:
SBD 4 (Bidder's Disclosure): declares whether the bidder or any director, trustee, shareholder, member, partner or controlling person is employed by the state, has a relationship with anyone employed by the procuring institution, or has an interest in any related enterprise. A false or incomplete declaration disqualifies the bid.
Evaluation Criteria
Source: Standard Bidding Document (SDB) 4.pdf (TENDER)
Bidders must not be listed on the Register for Tender Defaulters or the List of Restricted Suppliers. Bidders must declare any employment relationship with the state or any connection to employees of the procuring institution. Bidders must complete and submit SBD 4 (Bidder's Disclosure).
DocumentSBD 3.3.pdfReview complete
Important Dates
Source: SBD 3.3.pdf (TENDER)
Closing time: 11:00
Submission Guidelines
Source: SBD 3.3.pdf (TENDER)
Returnable documents:
SBD 3.3 (Pricing Schedule – Professional Services): completed, signed and submitted as the bid price offer.
Submission method and address are not stated in the document.
Evaluation Criteria
Source: SBD 3.3.pdf (TENDER)
No evaluation criteria are stated in the document. The bid is priced on the SBD 3.3 pricing schedule.
Technical Specifications
Source: SBD 3.3.pdf (TENDER)
The document is a pricing schedule only; no technical specifications are provided.
Pricing Schedule
Source: SBD 3.3.pdf
Pricing schedule requirements:
Quote a ceiling price covering all phases and all expenses, inclusive of all applicable taxes.
List each person involved, their position, hourly rate and daily rate.
Provide cost per phase and man-days per phase.
Itemise travel expenses (rate/km, total km, class of air travel) – only actual costs recoverable, proof required.
Itemise other expenses (accommodation, telephone, reproduction) – proof required.
State period required to commence after bid acceptance.
State estimated man-days for completion.
State whether rates are firm for the full contract period; if not, provide adjustment basis (e.g. CPI).
Financial Requirements
Source: SBD 3.3.pdf (TENDER)
Pricing format:
Ceiling price: bidders must quote a ceiling price covering all phases and all expenses, inclusive of all applicable taxes.
Rates: hourly and daily rates for each person involved in the project must be listed.
Phases: cost per phase and man-days per phase must be stated.
Travel expenses: only actual costs are recoverable; proof must accompany certified invoices.
Other expenses (e.g. accommodation, telephone, reproduction): must be itemised with rate, quantity and amount; proof must accompany certified invoices.
Rates firm: bidders must state whether rates are firm for the full contract period; if not, the adjustment basis (e.g. CPI) must be provided.
Commencement period: bidders must state the period required to start after bid acceptance.
Estimated man-days for completion must be stated.
Offer validity: the bid must state the number of days the offer remains valid from the closing date.
Compliance Requirements
Source: SBD 3.3.pdf (TENDER)
No specific compliance requirements are stated in the document.
DocumentSBD 1 - Invitation to Bid.pdfReview complete
Description
Source: SBD 1 - Invitation to Bid.pdf
The tender is for the appointment of a service provider for the supply, delivery and configuration of backup storage and a backup server blade. The bid response documents may be deposited in the bid box at the street address provided in the bid document. Bids must be submitted on the official forms provided. The bid is subject to the Preferential Procurement Policy Framework Act, 2000, the Preferential Procurement Regulations, the General Conditions of Contract (GCC), and any applicable special conditions. The successful bidder must complete and sign SBD 7 (Contract Form).
Submission Guidelines
Source: SBD 1 - Invitation to Bid.pdf (TENDER)
Submission method: bids must be deposited in the bid box at the street address specified in the bid document.
Bids must be submitted on the official forms provided, not retyped.
Late bids will not be accepted for consideration.
The successful bidder must complete and sign SBD 7 (Contract Form).
Returnable forms:
SBD 1 (Invitation to Bid): completed and signed as the offer cover page, including supplier information and declarations.
Proof of authority for the signatory (e.g. company resolution).
SARS Tax Compliance Status PIN or CSD number.
Foreign suppliers must complete the questionnaire in SBD 1 Part A.
Evaluation Criteria
Source: SBD 1 - Invitation to Bid.pdf (TENDER)
Evaluation is subject to the Preferential Procurement Policy Framework Act, 2000 and the Preferential Procurement Regulations.
Bids from persons in the service of the state, or companies/close corporations with directors/members in the service of the state, will not be considered.
Bidders must be tax compliant and submit a SARS Tax Compliance Status PIN or CSD number.
Technical Specifications
Source: SBD 1 - Invitation to Bid.pdf (TENDER)
The procurement is for the supply, delivery and configuration of backup storage and a backup server blade.
The bid response documents may be deposited in the bid box situated at the street address provided in the bid document.
Compliance Requirements
Source: SBD 1 - Invitation to Bid.pdf (TENDER)
Tax compliance:
Bidders must be tax compliant and submit a SARS Tax Compliance Status (TCS) PIN, or a CSD number if no TCS PIN is available.
TCS PIN applications are made via e-filing on the SARS website (www.sars.gov.za).
A printed TCS certificate may be submitted with the bid.
For consortia, joint ventures, or sub-contractors, each party must submit a separate TCS certificate, PIN, or CSD number.
Bidders must be registered on the Central Supplier Database (CSD) if no TCS PIN is available.
Disqualification:
Bids from persons in the service of the state, or companies/close corporations with directors/members in the service of the state, will not be considered.
Failure to provide or comply with any of the required particulars may render the bid invalid.
DocumentCompulsory CV template for Uniformity.docxReview complete
Description
Source: Compulsory CV template for Uniformity.docx
The bidder must submit a compulsory CV template for each individual proposed on the team, with the role clearly indicated on the template.
The template must be replicated for every individual on the team.
One person may cover more than one role, but the experience for each role must be defined on a separate compulsory CV template.
Each template records the individual's role, personal details, professional membership, present position and years with the bidder's organisation, their qualifications with copies attached, their professional experience relevant to the role, and references relevant to the practice area.
Submission Guidelines
Source: Compulsory CV template for Uniformity.docx (unknown)
Returnable document
A completed compulsory CV template for every individual proposed on the team.
Copies of each qualification listed in the CV pack must be attached.
Formatting rules
The role the individual is proposed for must be stated on the template.
One template per person; where a single individual covers more than one role, the experience for each role must be set out on its own separate template.
Technical Specifications
Source: Compulsory CV template for Uniformity.docx (unknown)
Personnel documentation
A compulsory CV template must be completed for each individual put forward on the team.
The role applied for must be indicated on the template.
One template per individual; where a person fulfils more than one role, the experience for each role must be defined on a separate template.
Copies of every qualification listed must be included in the CV pack.
Template fields per individual
Role; first name and surname; date of birth; nationality; professional membership; present position; years with the bidder's organisation.
Qualifications: institution, dates attended and qualification obtained, listed from the most recent.
Professional experience relevant to the role: dates, organisation, location, position and a listed description of duties.
References relevant to the practice area: name, organisation and contact details.
DocumentAnnexure B -Costing_QTCO 10-2025.xlsxReview complete
Description
Source: Annexure B -Costing_QTCO 10-2025.xlsx
The tender is for the appointment of a service provider to supply, deliver and configure backup storage and a backup server blade for the Quality Council for Trades and Occupations.
Submission Guidelines
Source: Annexure B -Costing_QTCO 10-2025.xlsx (unknown)
Returnable documents:
Annexure B: Summary of past experience, with reference letters on client letterhead, covering up to 10 projects (project description, client name, contact details, contract start/end dates, contract value).
Annexure B1: Pricing information, itemised as overheads, server hardware, storage hardware, cables and accessories, installation and configuration, software and licensing.
SBD 3.3: Pricing schedule; the total bid price must match the total on Annexure B1.
The total bid price must be VAT inclusive and cover all expenses.
The bidder must sign Annexure B1.
Evaluation Criteria
Source: Annexure B -Costing_QTCO 10-2025.xlsx (unknown)
The bid price will be used for comparison. Bidders must complete Annexure B (past experience) and Annexure B1 (pricing). No other evaluation criteria are stated in the provided document.
Technical Specifications
Source: Annexure B -Costing_QTCO 10-2025.xlsx (unknown)
Supply, delivery and configuration of backup storage and a backup server blade for the Quality Council for Trades and Occupations. The scope includes server hardware, storage hardware, cables and related accessories, installation and configuration, and software and licensing.
Financial Requirements
Source: Annexure B -Costing_QTCO 10-2025.xlsx (unknown)
Pricing must be provided in Annexure B1, itemised by cost category, with a total bid price including VAT and all expenses. The total must match the price on SBD 3.3.
Compliance Requirements
Source: Annexure B -Costing_QTCO 10-2025.xlsx (unknown)
No specific compliance requirements are stated in the provided document.
DocumentGeneral Conditions of Contract.pdfReview complete
Description
Source: General Conditions of Contract.pdf
The procurement is for the supply, delivery and configuration of backup storage and a backup server blade for the Quality Council for Trades and Occupations. No further scope details are provided in the available document.
Submission Guidelines
Source: General Conditions of Contract.pdf (TENDER)
Returnable documents: none specified in the available document. The bid must be submitted by the closing time; late bids are disqualified.
Evaluation Criteria
Source: General Conditions of Contract.pdf (TENDER)
Bidders must hold a valid SARS tax clearance certificate. The contract is subject to the General Conditions of Contract, including provisions on corrupt and fraudulent practices, restrictive practices, and the National Industrial Participation Programme. Bidders must not engage in collusive bidding. The successful bidder may be required to furnish a performance security within 30 days of contract award. Bidders must comply with any Special Conditions of Contract (SCC) that supplement the GCC.
Technical Specifications
Source: General Conditions of Contract.pdf (TENDER)
The scope of work is the supply, delivery and configuration of backup storage and a backup server blade for the Quality Council for Trades and Occupations. No further technical details are provided in the available document.
Quality Management
Source: General Conditions of Contract.pdf
Goods supplied must conform to the standards mentioned in the bidding documents and specifications. The purchaser may inspect, test, or analyse supplies at any stage; if they do not comply, they may be rejected, and the supplier must replace them at its own cost. Pre-bidding testing is for the bidder's account.
Financial Requirements
Source: General Conditions of Contract.pdf (TENDER)
Performance security: the successful bidder must furnish a performance security within 30 days of notification of contract award, in the amount specified in the Special Conditions of Contract. Acceptable forms: bank guarantee, irrevocable letter of credit, or cashier's/certified cheque. The security is returned within 30 days after completion of all obligations, including warranty. Payment: invoices paid within 30 days of submission, in Rand unless otherwise specified.
Compliance Requirements
Source: General Conditions of Contract.pdf (TENDER)
Tax clearance: a valid SARS tax clearance certificate is required before award; no contract is concluded with a bidder whose tax matters are not in order. The certificate must be an original issued by SARS.
Health & Safety
Source: General Conditions of Contract.pdf
No specific health and safety requirements are stated in the available document.
Contractual Terms
Source: General Conditions of Contract.pdf
The contract is governed by the General Conditions of Contract (GCC) and any Special Conditions of Contract (SCC) that supplement it; in a conflict, the SCC prevails. Key terms:
The supplier must not disclose contract documents or information without prior written consent, and must return all documents to the purchaser on completion.
The supplier must indemnify the purchaser against third-party claims of patent, trademark, or industrial design infringement.
The supplier must provide packing sufficient to prevent damage during transit, and comply with any special packing requirements.
Delivery must be made according to the contract terms; the supplier bears all risks until delivery and receipt.
Goods must be insured in a freely convertible currency against loss or damage during manufacture, transport, storage, and delivery.
The supplier may be required to provide incidental services such as on-site assembly, commissioning, tools, manuals, maintenance, and training.
Spare parts may be required; the supplier must notify the purchaser of termination of spare parts production and provide blueprints if requested.
Warranty: goods must be new, unused, and free from defects; warranty valid for 12 months after delivery/acceptance or 18 months after shipment, whichever ends earlier.
Prices must not vary from the bid, except as authorised in the SCC.
No contract amendments except by written agreement.
No assignment of obligations without prior written consent.
Subcontracts must be notified in writing.
Delays: the supplier must notify the purchaser of any conditions impeding timely delivery; penalties may be imposed.
Penalties: for late delivery, a sum calculated on the delayed price using the current prime interest rate per day of delay.
Termination for default: the purchaser may terminate if the supplier fails to deliver or perform, or engages in corrupt/fraudulent practices; the supplier may be restricted from doing business with the public sector for up to 10 years.
Force majeure: the supplier is not liable for delays caused by force majeure, but must notify the purchaser in writing.
Termination for insolvency: the purchaser may terminate if the supplier becomes bankrupt or insolvent.
Disputes: parties must first attempt amicable resolution; if not resolved within 30 days, mediation may be commenced; if mediation fails, the dispute may be settled in a South African court.
Limitation of liability: the supplier is not liable for indirect or consequential loss, except for penalties/damages; aggregate liability limited to the total contract price, except for repair/replacement of defective equipment.
Governing language: English.
Applicable law: South African law.
Notices: sent by registered or certified mail to the address in the bid.
Taxes: local supplier responsible for all taxes, duties, and license fees until delivery; foreign supplier responsible for taxes outside the purchaser's country.
The National Industrial Participation Programme (NIPP) applies to contracts subject to NIP obligations.
Prohibition of restrictive practices: collusive bidding is prohibited; the purchaser may refer matters to the Competition Commission and may invalidate bids, terminate contracts, or restrict bidders from doing business with the public sector for up to 10 years.
Section
Source: General Conditions of Contract.pdf
No additional evaluation criteria are stated in the available document.
DocumentSBD 6.1.pdfReview complete
Submission Guidelines
Source: SBD 6.1.pdf (TENDER)
Returnable forms — all must be completed, signed and submitted with the tender:
SBD 6.1 (Preference Points Claim Form): claims preference points for specific goals and certifies the accuracy of the claims. Proof of claimed goals must accompany the tender.
Disqualification risks:
Failure to submit proof or documentation required to claim specific goals means no preference points are claimed for those goals.
The organ of state may require substantiation of any preference claim at any time.
Evaluation Criteria
Source: SBD 6.1.pdf (TENDER)
Evaluation split:
Price: 80 points
Specific goals: 20 points
Total: 100 points
Preference point system: 80/20 (for requirements up to R50 000 000 including taxes) or 90/10 (for requirements above R50 000 000). The applicable system for this tender is not specified in the document.
Specific goals and points (claimed by the bidder, verified by the organ of state):
Black ownership with at least 50%: 10 points (more than 50% = 10 points; less than 50% = 0 points)
Youth ownership with at least 50%: 5 points (more than 50% = 5 points; less than 50% = 0 points)
Women ownership with at least 50%: 5 points (more than 50% = 5 points; less than 50% = 0 points)
Means of verification: B-BBEE certificate, affidavit, ID copy, share certificate, CSD report.
If the bidder does not claim specific goals, no preference points are awarded for them.
Compliance Requirements
Source: SBD 6.1.pdf (TENDER)
B-BBEE and specific goals:
Bidders must submit proof of claimed specific goals (e.g., B-BBEE certificate, affidavit, ID copy, share certificate, CSD report) with the tender.
The organ of state may require substantiation of any preference claim at any time.
Fraudulent claims may lead to disqualification, recovery of costs, contract cancellation, restriction from doing business with the state for up to 10 years, and criminal prosecution.
Contractual Terms
Source: SBD 6.1.pdf
The bidder must complete the company/firm declaration in SBD 6.1, including company name, registration number, and type of company. The authorised signatory certifies that the information is true and correct, and that preference points claimed are in accordance with the general conditions. The organ of state may require documentary proof of claims. Fraudulent claims may result in disqualification, recovery of costs, contract cancellation, restriction from state business for up to 10 years, and criminal prosecution.
Section
Source: SBD 6.1.pdf
The tender uses the 80/20 or 90/10 preference point system. Price is allocated 80 or 90 points, and specific goals 20 or 10 points respectively. The specific goals for this tender are:
Black ownership at least 50%: 10 points
Youth ownership at least 50%: 5 points
Women ownership at least 50%: 5 points
Proof of these goals must be submitted with the tender.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
256 Glyn Ln, Hatfield, Pretoria, 0002, South Africa
Document-Backed
Recently Synced
Source Snapshot Available
AI Enhanced
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
8
Last checked
20 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.