Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Issuing Organization
Development Bank of Southern Africa (DBSA)Location
Gauteng
Closing Date
11 Dec 2026
Documents available on tender detail page
Tender Type
Request for Proposal
Delivery Location
1258 Lever Road - Headway Hill - Midrand - 1685
Organization Type
GOVERNMENT
Published
20 Nov 2026
OCDS Reference
ocds-9t57fa-179253
Supply, delivery and installation of furniture at three ndt programme tourism sites — tshathogwe lodge, mtititi lodge and mapate recreation tourism facility — procured by the development bank of southern africa under rfp198.2026. Bidders must be registered on the central supplier database, tax compliant, and able to evidence b-bbee status plus coida and uif registration. Attendance at the compulsory tender brief must be recorded, and every applicable returnable must be completed and signed in full. The single biggest risk is administrative: an unrecorded brief attendance, an unsigned returnable, or an unformalised joint venture can remove the bid from evaluation before IT is scored.
Closing: bids close on 11 December 2026 at 09:00; nothing received after that time can be considered.
Compulsory tender brief: attendance must be recorded — either by posting the company name, email address, contact number and attendee name in the Microsoft Teams chat for an online brief, or by signing the attendance register at the physical venue; failure to record attendance may disqualify the bid from further evaluation.
Returnables: every applicable form must be completed and signed in full, the tender document may not be taken apart or altered, and annexures must be filed separately and indexed to match the Returnables Checklist.
Registration and tax: proof of CSD registration, a valid SARS tax compliance status (the Tax Requirement form authorises DBSA to obtain the tax clearance certificate), and an SBD 6.1 B-BBEE status level certificate to claim preference points.
Statutory documents: COIDA (Workmen's Compensation) registration certificate, UIF registration certificate, CIPC registration documents and identity documents.
Past conduct and exclusions: all DBSA project defaults and terminations in the last 5 years must be declared on the Declaration of Default and Termination, which must be signed even when nothing is declared — a false declaration disqualifies the bid, and listing on the Register for Tender Defaulters or the List of Restricted Suppliers is an automatic disqualification.
Joint ventures and consortia: a formalised joint venture agreement signed by all parties and a completed JV/Consortium Disclosure Form are required — a letter of intention to formalise after award is not accepted and a non-compliant JV bid is treated as null and void and non-responsive.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Date & Time
Friday, 11 December 2026 - 11:00
Venue
Microsoft Teams - Refer to DBSA Website for the link to register be able to join
Important: Attendance at this briefing session is mandatory. Bids from suppliers who do not attend may be disqualified.
Categories
Request for Proposal
1258 Lever Road - Headway Hill - Midrand - 1685
Tenders in this industry often require registration with these bodies.
Recommended Certifications
Having these can improve your winning chances: Good Manufacturing Practice (GMP), SABS Product Certification, NRCS Certification
AI Document Analysis Stages
Description
Source: ANNEXURE A-SHEQ SPECIFICATION.pdf20 Nov
2026
Tender Published
Tender was published
11 Dec
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Annexure C - SHEQ Policy.pdf
RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdf
Supply, delivery and installation of furniture, fittings and equipment (FF&E) for three tourism facilities under the National Department of Tourism (NDT) programme: Mapate Recreation Facility, Mtititi Lodge and Tshathogwe Community Lodge. The scope covers guest units, restaurants and bars, laundries, staff quarters and back-up generators, with quantities specified in an unpriced bill of quantities.
ANNEXURE B- BASELINE RISK ASSESSMENT.pdf
Supply, delivery and installation of loose furniture, fittings and equipment (FF&E) at three tourism facilities under the NDT Programme: Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Facility. The works include bed linen, curtains and blinds, appliances, crockery, cutlery, glassware, industrial laundry equipment, and back-up diesel generators (80-100 kVA) for two of the sites. The contract is awarded to one contractor, priced as three sections in the Bills of Quantities.
RFP198.2026 Volume 3 of 3_The Contract.pdf
Supply, delivery and installation of furniture at Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, projects under the NDT Programme, for the Development Bank of Southern Africa. The contract is an NEC3 Supply Contract (April 2013 revision) with a performance bond, delay damages, and specific conditions including B-BBEE and health and safety requirements.
ANNEXURE A-SHEQ SPECIFICATION.pdf
Supply, delivery and installation of loose furniture, fittings and equipment (FF&E) to three tourism facilities under the NDT Programme: Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility. The works include off-loading, unpacking, assembly, placing in position, and fitting of curtains and blinds, plus supply of appliances, bed linen, crockery, cutlery, glassware, and industrial laundry equipment. The contract is awarded to one contractor, priced as one tender of three sections, one per site.
RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf
Supply, delivery and installation of hospitality furniture at three tourism facilities — Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility — under the National Department of Tourism (NDT) programme, procured by the Development Bank of Southern Africa (DBSA). The successful bidder will enter a written contract (SBD7) and must provide performance and transit insurance.
RFP198.2026_Volume 2 of 3_Returnables_v1.0.pdf
Supply, delivery and installation of furniture at Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, projects under the NDT Programme, for the Development Bank of Southern Africa (DBSA). The tender is issued under RFP198.2026 and requires completion of a comprehensive set of returnable documents.
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
Development Bank of Southern Africa (DBSA)Secure DBSA tenders with AI Matching Engine, development finance intelligence, compliance analysis, and bid support for infrastructure and consulting.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubMedian Estimate
R 1 725 000
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
The Development Bank of Southern Africa (DBSA) is the client for this project.
The works comprise the supply and delivery to site, including off-loading, unpacking, assembly and placing in position, of loose furniture, fittings and equipment (FF&E) to three tourism facilities, together with the fitting of curtains and blinds where so described.
The Works will be awarded to one Contractor and are priced in the Bills of Quantities as one tender of three sections, one section per site: Mapate Recreation Facility, Mtititi Lodge, and Tshathogwe Community Lodge.
Evaluation Criteria
Source: ANNEXURE A-SHEQ SPECIFICATION.pdf (unknown)Bidders must be registered and in good standing with the Compensation Fund or a licensed compensation insurer.
Bidders must have the necessary competencies and resources to perform the construction work safely.
Bidders must be a suitably qualified and experienced contractor, grade 7 GB or higher.
Bidders must comply with the Occupational Health and Safety Act and Construction Regulations 2014.
Bidders must provide a Health and Safety Plan and open a Health and Safety File.
Bidders must notify the Department of Labour of intended construction work (Construction Regulation 4).
Bidders must ensure all employees have valid medical certificates of fitness (Annexure 3).
Bidders must appoint a full-time Construction Manager and Construction Health and Safety Officer (SACPCMP registered).
Bidders must complete all required legal appointments as listed in the specification (e.g., fall protection planner, scaffold supervisor, etc.).
Technical Specifications
Source: ANNEXURE A-SHEQ SPECIFICATION.pdf (unknown)The works comprise the supply and delivery to site, including off-loading, unpacking, assembly and placing in position, of loose furniture, fittings and equipment (FF&E) to three tourism facilities, together with the fitting of curtains and blinds where so described.
The Works will be awarded to one Contractor and are priced in the Bills of Quantities as one tender of three sections, one section per site:
Section 1 - Mapate Recreation Facility
Section 2 - Mtititi Lodge
Section 3 - Tshathogwe Community Lodge
Methodology
Source: ANNEXURE A-SHEQ SPECIFICATION.pdfThe Health and Safety Plan must include documented Method Statements of Work detailing the key activities to be performed as per scope of works.
The Principal Contractor must set up a Risk Assessment Program to identify and determine the scope and details of any risk associated with any hazard related to the construction project.
Standard Working Procedures (SWP) and Method Statements must be developed as part of the Health and Safety Plan.
Health & Safety
Source: ANNEXURE A-SHEQ SPECIFICATION.pdfThe Health and Safety Specification is prepared in terms of Construction Regulation 5(1)(b) of the Occupational Health and Safety Act, 1993, to set out the health and safety requirements for the construction work.
The Principal Contractor must prepare a Health and Safety Policy in terms of Section 7 of the OHS Act and Construction Regulation 7, and a site-specific Health and Safety Plan.
The Principal Contractor must set up a Risk Assessment Program to identify hazards and determine steps to remove, reduce or control them.
The Health and Safety Plan must include documented Method Statements of Work detailing key activities.
The Principal Contractor must open and keep on site a Health and Safety File containing all required documentation.
The Principal Contractor must notify the Department of Labour of intended construction work in terms of Construction Regulation 4.
All employees must have a valid medical certificate of fitness specific to the construction work, issued by an occupational health practitioner (Annexure 3).
The Principal Contractor must appoint a full-time Construction Manager and Construction Health and Safety Officer (SACPCMP registered).
All required legal appointments (e.g., fall protection planner, scaffold supervisor, excavation supervisor) must be made in writing and placed on the Health and Safety File.
The Principal Contractor must ensure all employees and visitors undergo health and safety induction training.
The Principal Contractor must conduct periodic site audits at least once every 30 days and submit a Corrective Action Plan to the Health and Safety Consultant within 7 days of receiving an audit.
The Principal Contractor must hand over a consolidated Health and Safety File to the client upon completion of the works.
Description
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdfThe tender is for the appointment of a supplier for the supply, delivery and installation of furniture at Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, projects under the NDT Programme. The works include supply, delivery, off-loading, unpacking, assembly and placing in position of loose furniture, fittings and equipment (FF&E) to three tourism facilities, including fitting of curtains and blinds.
Evaluation Criteria
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdf (unknown)Bidders must be registered with COIDA and provide a Letter of Good Standing. Proof of submission of Annexure 2 to the Department of Employment and Labour is required. A valid Health and Safety Plan and file approval per client requirements are mandatory. Valid competencies, medicals, and work permits for employees must be provided. Compliance with the Occupational Health and Safety Act and Construction Regulations 2014 is required.
Technical Specifications
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdf (unknown)The works comprise the supply, delivery, off-loading, unpacking, assembly and placing in position of loose furniture, fittings and equipment (FF&E) to three tourism facilities, including fitting of curtains and blinds where described. The contract is awarded to one contractor and priced in the Bills of Quantities as one tender of three sections, one per site:
Quantities and specifications are as stated in the Bills of Quantities. Items of similar specification and equal quality, as approved by the Principal Agent, will be accepted. Items stated as lump sums (curtains and blinds) carry a fixed amount and are not priced by the tenderer. Sub-totals of the three sections are carried to the Combined Summary of the Bills of Quantities, where VAT is added once and the grand total is carried to the Form of Offer.
Methodology
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdfThe contractor must follow the risk assessment process, including hazard identification, risk evaluation, and implementation of control measures. Method statements must be prepared for key activities and approved before work commences. The hierarchy of controls must be applied to eliminate or reduce risks.
Experience & Qualifications
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdfPersonnel must be competent, with knowledge, training, experience, and qualifications specific to the work. Operators must have valid competencies and medical fitness. Appointed persons must be competent for their roles.
Quality Management
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdfThe project requires a Health, Safety, Environmental and Quality Management system. The Baseline Risk Assessment identifies hazards and risks across the project lifecycle and informs the Health and Safety Specification. Quality requirements include adherence to specifications in the Bills of Quantities, with items of similar specification and equal quality accepted as approved by the Principal Agent.
Financial Requirements
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdf (unknown)Pricing is via the Bills of Quantities, structured as one tender of three sections (one per site). Curtains and blinds are lump-sum items with fixed amounts, not priced by the tenderer. VAT is added once to the combined subtotal. No other financial requirements (bonds, guarantees, retention, payment terms) are stated in this document.
Health & Safety
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdfThe project is subject to the Occupational Health and Safety Act and Construction Regulations 2014. A Baseline Risk Assessment is required under Construction Regulation 5(1)(a). Key requirements include:
Environmental
Source: ANNEXURE B- BASELINE RISK ASSESSMENT.pdfEnvironmental risks are assessed as part of the Baseline Risk Assessment. Control measures include dust suppression, preventing environmental contamination from services, and managing waste. The risk matrix considers environmental impact as a factor in risk evaluation.
Description
Source: RFP198.2026 Volume 3 of 3_The Contract.pdfThe contract is for the supply, delivery and installation of furniture at Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, projects under the NDT Programme.
Contract type: NEC3 Supply Contract (SC) April 2013 revision.
Language: English.
Law: Republic of South Africa.
Period for reply: 1 week.
Starting date: TBC.
Delivery date: TBC.
Defects date: 52 weeks after delivery.
Defect correction period: 1 week (2 weeks for major defects).
Defect access period: 2 days.
Payment: assessment interval 3 weeks; payment within 4 weeks; interest 0% above prime.
Liability: indirect/consequential loss R0.00; design defects and total liability limited to total prices plus 10%.
Insurance: employee injury/death minimum R500,000.
Delay damages: per Public Works QS 002 formula, max 10% of total prices.
Performance bond: 10% of contract price, reducing to 5% after last delivery, expiring 1 month after defects date.
Risk Register items: late delivery, defective goods, non-compliance with health and safety regulations including COVID-19 directives.
Important Dates
Source: RFP198.2026 Volume 3 of 3_The Contract.pdf (TENDER)Closing date: 11 December 2026 at 09:00 (from tender record).
No other dates (briefings, site visits, clarification deadlines) are stated in this volume.
Contact Information
Source: RFP198.2026 Volume 3 of 3_The Contract.pdf (TENDER)Contact: Development Bank of Southern Africa Limited
Address: 1258 Lever Road, Headway Hill, Midrand, Gauteng, 1685
Telephone: 011 313 3911
Supply Manager: TBC
Supply Manager telephone: 011 313 5082
Supply Manager email: TBC
Submission Guidelines
Source: RFP198.2026 Volume 3 of 3_The Contract.pdf (TENDER)Returnable documents (all must be completed and signed):
Evaluation Criteria
Source: RFP198.2026 Volume 3 of 3_The Contract.pdf (TENDER)The Pricing Schedule is used for evaluation purposes. The evaluation criteria and scoring split are not stated in this volume.
Technical Specifications
Source: RFP198.2026 Volume 3 of 3_The Contract.pdf (TENDER)Scope: Supply, delivery and installation of furniture at Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, projects under the NDT Programme.
Contract type: NEC3 Supply Contract (SC) April 2013 revision.
Language of contract: English.
Law of contract: Republic of South Africa.
Starting date: TBC.
Delivery date: TBC.
The supplier must not bring goods to the delivery place more than one week before the delivery date.
First programme for acceptance: within 2 days after order placement.
Revised programmes: at intervals no longer than 2 weeks.
Defects date: 52 weeks after delivery.
Defect correction period: 1 week; 2 weeks for major defects.
Defect access period: 2 days.
Risk Register items: late delivery affecting the purchaser's delivery obligation, defective equipment or goods, non-compliance with health and safety regulations including COVID-19 directives.
Experience & Qualifications
Source: RFP198.2026 Volume 3 of 3_The Contract.pdfNo specific experience or qualification requirements are stated in this volume.
Quality Management
Source: RFP198.2026 Volume 3 of 3_The Contract.pdfQuality management: supplier must allow the supply manager or purchaser access to the manufacturing facility, plant, or place to inspect accounts and records, including verification of forecasts.
Goods must conform to applicable environmental legislation and the purchaser's environmental specifications.
Spare and replacement parts must be made available for the designed working life of the goods.
Pricing Schedule
Source: RFP198.2026 Volume 3 of 3_The Contract.pdfPricing instructions:
Financial Requirements
Source: RFP198.2026 Volume 3 of 3_The Contract.pdf (TENDER)Performance bond (Option X13): on-demand guarantee issued by an entity registered under the Short Term Insurance Act or the Banks Act, approved by the purchaser, fixed at 10% of the contract price at contract date, reducing to 5% when the supplier achieves the last delivery date, expiring 1 month after the defects date.
Payment: assessment interval 3 weeks; payment within 4 weeks of the payment certificate.
Interest rate: 0% above the prime rate of the average of the four main banks (Standard Bank as purchaser's bank).
Supplier's liability for indirect/consequential loss: R0.00.
Supplier's liability for defects due to design not notified before last defects date: total of prices plus 10%.
Supplier's total liability: total of prices plus 10%.
Insurance: minimum limit for employee injury/death per event: R500,000 (as prescribed by COIDA and common law).
Delay damages: per calendar day per the Public Works QS 002 formula, up to a maximum of 10% of total prices; purchaser may terminate if penalties reach the maximum.
Payment terms: tax invoice must be provided within 1 week of payment certificate; payment delayed if invoice not correct.
VAT: supplier must include the purchaser's VAT number 4740101508 on each invoice.
Compliance Requirements
Source: RFP198.2026 Volume 3 of 3_The Contract.pdf (TENDER)B-BBEE: supplier must notify the purchaser within 7 days of any change in B-BBEE status; updated verification certificate must be submitted within 30 days; if status decreases to Level 4 or lower, the purchaser may renegotiate or terminate.
Health and safety: supplier must comply with the Occupational Health and Safety Act 1993, Construction Regulations 2014, and the Code of Practice for managing exposure to SARS-CoV-2 in the workplace.
Ethics: any corrupt or illegal practice is grounds for termination.
Confidentiality: supplier must not disclose contract information without consent.
Cession and delegation: not allowed without written consent.
Joint ventures: jointly and severally liable; must notify the supply manager of the key person within 2 weeks of contract date.
Access to records: supplier must allow access to manufacturing plant and records during working hours.
Environmental: goods and services must conform to applicable environmental legislation and the purchaser's environmental specifications.
Spare parts: supplier must make spares available for the designed working life of the goods.
Health & Safety
Source: RFP198.2026 Volume 3 of 3_The Contract.pdfHealth and safety obligations:
Contractual Terms
Source: RFP198.2026 Volume 3 of 3_The Contract.pdfContract: NEC3 Supply Contract (SC) April 2013 revision.
Contract data: includes conditions of contract, contract specific data, and performance guarantee.
Security: performance bond per Option X13 must be delivered within the period stated in contract data or the conditional letter of acceptance, whichever is earlier; other bonds, guarantees, and insurance documents must be delivered within 14 days of the agreement coming into effect.
Failure to provide security constitutes repudiation.
Agreement comes into effect when the supplier receives a fully completed original copy; supplier has 5 days to notify of any reason for non-acceptance.
Schedule of Deviations: only deviations recorded here are valid; cover letters not referenced here are not part of the contract.
Termination: purchaser may terminate if delay damages reach the maximum (10% of total prices) or for illegal/corrupt practices.
Dispute resolution: adjudicator mutually agreed; if not agreed, appointed by the Association of Arbitrators of Southern Africa; tribunal is arbitration.
Confidentiality: supplier must not disclose information; images of the works require prior written consent.
Recovery plan: if progress is not in accordance with the accepted programme, supplier must prepare a recovery plan within 14 days of instruction.
Supply Manager's authority limited; changes above 20% require National Treasury approval; increases 0-9.99% require IDD Group Executive approval, 10-19.99% require DBSA CEO approval.
Supplier must not cede or delegate rights without written consent.
Joint ventures: jointly and severally liable; must notify key person within 2 weeks.
B-BBEE status changes: notify within 7 days; submit updated certificate within 30 days; decrease to Level 4 may lead to renegotiation or termination.
Ethics: corrupt practices are grounds for termination.
Health, safety and environment: supplier must comply with OHS Act, Construction Regulations 2014, and COVID-19 code of practice; supplier is liable as mandatory; must notify purchaser of incidents.
Access to records: supplier must allow inspection of accounts and records.
Environmental: goods must conform to environmental legislation and purchaser's specifications.
Spare parts: must be available for designed working life.
Payment: tax invoice required within 1 week of payment certificate; VAT number 4740101508 must appear on invoices.
Section
Source: RFP198.2026 Volume 3 of 3_The Contract.pdfThe Pricing Schedule is used for evaluation purposes. No further evaluation criteria are stated in this volume.
Description
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdfThe procurement covers the supply, delivery and installation of furniture, fittings and equipment (FF&E) at three tourism facilities under the National Department of Tourism (NDT) programme: Mapate Recreation Facility, Mtititi Lodge, and Tshathogwe Community Lodge. The scope includes restaurant and bar equipment, bedroom and bathroom furnishings, laundry equipment, and back-up generators.
Contact Information
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdf (unknown)No contact details are provided in the document.
Submission Guidelines
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdf (unknown)Returnable documents: the Form of Offer must be completed and signed, and the priced Bill of Quantities must be submitted. Standard National Treasury forms (SBD 1, SBD 4, SBD 6.1, SBD 8, SBD 9) are typically required but are not detailed in the provided document.
Submission method: not stated in the document.
Closing time: 11 December 2026 at 09:00 (from tender record).
Evaluation Criteria
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdf (unknown)No eligibility or evaluation criteria are stated in the provided document. The Bill of Quantities is unpriced, so bidders must price all items. Items of similar specification and equal quality, as approved by the Principal Agent, will be accepted.
Technical Specifications
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdf (unknown)Scope: supply, delivery and installation of furniture, fittings and equipment (FF&E) at three tourism facilities under the National Department of Tourism (NDT) programme.
Sites and sections:
Key items per site (quantities vary by site):
Quality note: items of similar specification and equal quality, as approved by the Principal Agent, will be accepted.
Pricing Schedule
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdfPricing is via an unpriced Bill of Quantities (BOQ). Each site has its own section with sub-totals, and a combined summary across all three sites. Add 15% VAT to the sub-total. The grand total is carried to the Form of Offer. Contingencies of 10% are included in each site's summary. Lump-sum items for blinds and curtains are provisional and to be remeasured or confirmed on site.
Financial Requirements
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdf (unknown)Pricing format: unpriced Bill of Quantities (BOQ) with rates and amounts to be completed by the bidder.
Structure:
Lump-sum items with stated amounts (to be priced as given):
Compliance Requirements
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdf (unknown)No specific compliance requirements (CSD, tax, B-BBEE, CIDB, etc.) are stated in the provided document.
Section
Source: RFP198-2026 MAPATE, MTITITI AND TSHATHOGWE - FURNITURE - UNPRICED BOQ-.pdfThe document states that items of similar specification and equal quality, as approved by the Principal Agent, will be accepted. No other evaluation criteria are provided.
Description
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdfThe tender is for the appointment of a supplier to supply, deliver and install furniture at three tourism facilities: Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, under the NDT Programme. The employer is the Development Bank of Southern Africa Limited, acting as implementing agent. The contract will be a NEC3 Supply Contract.
Important Dates
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf (RFP)Compulsory tender briefing:
Cut-off for tender queries: 1 December 2026 at 12h00.
Response to queries: 2 December 2026 at 16h30.
Deadline to request tender submission link: 11 December 2026 at 16h30.
Closing date and time: 11 December 2026 at 23h55.
Contact Information
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf (RFP)Bidding procedure enquiries:
Technical information: Refer to T1.1 (not specified in the provided text).
Employer address:
Development Bank of Southern Africa Limited
1258 Lever Road, Headway Hill
Midrand, Gauteng, 1685
Telephone: (011) 313 3911
Submission Guidelines
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf (RFP)Submission method: online via Microsoft OneDrive tender submission link.
Evaluation Criteria
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf (RFP)Evaluation method: CIDB Method 1, three-stage evaluation.
Stage 1 – Responsiveness (pre-qualifiers):
Stage 2 – Financial Offer and Preference:
Stage 3 – Objective Criteria and Risk Analysis:
Technical Specifications
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf (RFP)Scope: Appointment of a supplier for the supply, delivery and installation of furniture at Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, projects under the NDT Programme.
Financial Requirements
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf (RFP)Pricing:
Performance Bond:
Goods in Transit Insurance:
Public Liability Insurance:
Other:
Compliance Requirements
Source: RFP198.2023_Volume 1 of 3_Procedures_v1.0.pdf (RFP)CSD registration:
Tax compliance:
B-bbee:
CIDB:
Local content:
Other registrations:
Submission Guidelines
Source: RFP198.2026_Volume 2 of 3_Returnables_v1.0.pdf (RFP)Returnable documents — each must be completed and signed in full:
Compilation rules
Disqualification risks
Technical Specifications
Source: RFP198.2026_Volume 2 of 3_Returnables_v1.0.pdf (RFP)Scope: supply, delivery and installation of furniture at Tshathogwe Lodge, Mtititi Lodge and Mapate Recreation Tourism Facility, under the NDT Programme.
Compliance Requirements
Source: RFP198.2026_Volume 2 of 3_Returnables_v1.0.pdf (RFP)CSD registration
Tax
B-bbee
Local content
Statutory registrations
Exclusion
Past conduct
Joint ventures
Conflict of interest
Contractual Terms
Source: RFP198.2026_Volume 2 of 3_Returnables_v1.0.pdfDBSA Service Provider Code of Conduct
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
1258 Lever Rd, Headway Hill, Midrand, 1685, South Africa
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
7
Last checked
20 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Contact
011-313-3827[email protected]www.dbsa.org1258 Lever Rd, Headway Hill, Midrand, 1685, South Africa
Key Personnel
Learn how to submit a winning bid with these related articles
A technical guide for manufacturers and suppliers to provide bulk school furniture—from desks to science labs—to Gauteng's growing school network.
Provincial procurement is not national procurement with a different address. Learn how provincial departments, entities, metros and districts buy, when they buy, and how to choose the province where your business can actually win.
Everything South African general contractors need to know about how to write a winning tender proposal without an in-house bid team in gauteng — covering CSD, BBBEE, step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
Local content is no longer optional in government manufacturing tenders. Learn how to master the SATS 1286 declaration and Annexures C, D, and E.
💡 Want more tendering tips and strategies?
Explore Our BlogGet deep intelligence on Manufacture of furniture. Unlock full pricing strategies, bid frequency, and historical win rates.