ESKOM requires a specialist contractor to perform in-situ non-destructive testing (ndt) of 14 coil retaining rings (crrs) on seven generator rotors at acacia and port rex power stations, including detailed visual testing, mechanised ultrasonic testing of internal surfaces, and external-surface examination by eddy current or dye penetrant methods. The work is on an as-required basis, with inspections scheduled around outages from january 2027 to february 2028, and includes technical reporting and recommendations on crr serviceability. Bidders must submit electronically via eskom's etendering portal by 10:00 on 7 december 2026 and must include a fully completed e-tendering training acknowledgement form, without which the bid is disqualified.
Key Requirements
Closing: 7 December 2026 at 10:00 (SAST), submitted electronically through the Eskom eTendering portal (https://eTendering.eskom.co.za); a valid CSD number is required for portal access.
Mandatory returnable: E-Tendering Training Acknowledgement Form (Annexure M, template 240-9722574 Rev 1) must be fully completed and signed; failure renders the bid non-responsive and disqualified.
Technical qualification: the contractor's NDT inspection system must be qualified and approved by Eskom in accordance with Standard 240-87660096 before any inspection work may start.
Scope: inspection of 14 CRRs on 7 generator rotors (3 at Acacia, 3 at Port Rex, plus 1 spare rotor at Port Rex), using mechanised ultrasonic testing, detailed visual testing, and external-surface examination by eddy current or dye penetrant testing.
Subcontracting: no part of the service may be subcontracted.
PAYE Questionnaire (document 240-72909399): signed summary sheet and applicable affidavits must be returned to Eskom Group Tax at [email protected]; unsigned affidavits result in PAYE being withheld from payments.
B-BBEE: the contractor must notify the Employer within 7 days of any change affecting its B-BBEE status and provide an updated verification certificate within 30 days; a drop below the level held at Contract Date may lead to renegotiation or termination.
Provision of Services for the In-Situ Inspection and Non-Destructive Testing (NDT) of Generator Coil Retaining Rings, Including Technical Reporting, at Acacia and Port Rex Power Stations on an As-Required Basis
Tender context
Return to this tender’s issuing organisation, province, or category.
Provision of services for the in-situ inspection and non-destructive testing (ndt) of generator coil retaining rings, including technical reporting, at acacia and port rex power stations on an as-required basis
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
Procurement Rules & Compliance ContextThis tender may be governed by South African public procurement rules covering fairness, transparency, preferential procurement, anti-corruption, administrative justice and access to information.
10 rules
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
Core procurement rules
These rules commonly apply to South African public-sector procurement.
7
Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
high
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Constitution of the Republic of South Africa, 1996 – Section 217
Act 108 of 1996 (s217)
high
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Eskom Holdings SOC Ltd invites electronic tenders for the provision of in‑situ inspection and non‑destructive testing (NDT) of generator coil retaining rings, including technical reporting, at Acacia and Port Rex power stations on an as‑required basis. The tender is open to eligible suppliers who must submit a complete electronic package covering technical, commercial, financial, safety, quality and contractual requirements.
In-situ inspection and non-destructive testing (NDT) of generator coil retaining rings, including technical reporting, at Acacia and Port Rex Power Stations on an as-required basis. The service is procured by Eskom in the Western Cape.
Win Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Similar Tenders
Matched by category & region
Supplier Readiness Hub
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
cancellation: Stage 1: The manufacture, supply and delivery of various Kiosks on “an as and when required” basis for a period of three (3) years for Distribution
Clusters.
Based on Industry avg. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
Eskom requires in-situ inspection and non-destructive testing of generator coil retaining rings at Acacia and Port Rex power stations, together with technical reporting on the results. Work is released on an as-required basis rather than as a continuous service.
Important Dates
Source: E3804GXPOU Tender Documents.zip (unknown)
Closing
Date: 7 December 2026
Time: 10:00 (SAST)
Contact Information
Source: E3804GXPOU Tender Documents.zip (unknown)
eTendering and tender enquiries
Route: the buyer responsible for the published tender, via the eTendering portal
Electronic submission only, through Eskom's eTendering portal: https://eTendering.eskom.co.za
Tenders are advertised on the Eskom Tender Bulletin: https://tenderbulletin.eskom.co.za
A valid CSD number is required before the portal will grant access.
Portal registration requires email verification and a one-time PIN sent to the registered cellphone and email address.
Upload rules
Files must be loaded under the correct category (technical, commercial, financial).
Maximum size per file: 50 MB.
Maximum combined size of all uploaded files: 900 MB.
The bid is only lodged once "Finalise and Close Submission" is clicked; the portal then issues a submission timestamp.
System problems on Tender Bulletin, eTendering or OpenText must be raised with the buyer responsible for the tender.
Mandatory returnables
E-Tendering Training Acknowledgement Form (Annexure M, template 240-9722574 Rev 1): confirms the bidder has completed self-training on the eTendering solution and can operate it. Incomplete or missing form makes the bid non-responsive and disqualifies it.
C1.1 Form of Offer and Acceptance: signed by a representative holding authority to bind the tenderer.
PAYE Questionnaire pack (document 240-72909399): signed summary sheet plus the applicable signed affidavits, returned to Eskom Group Tax at [email protected].
Evaluation Criteria
Source: E3804GXPOU Tender Documents.zip (unknown)
Expected quantities listed in the price list are stated for tender pricing and evaluation purposes.
Responsiveness gate
A bid that does not carry a fully completed E-Tendering Training Acknowledgement Form is treated as non-responsive and disqualified before evaluation.
Technical Specifications
Source: E3804GXPOU Tender Documents.zip (unknown)
Scope
In-situ inspection of generator coil retaining rings.
Non-destructive testing (NDT) of generator coil retaining rings.
Technical reporting on the inspection and test results.
Sites
Acacia Power Station
Port Rex Power Station
Contract basis
Services are called off as required, not on a continuous basis.
Financial Requirements
Source: E3804GXPOU Tender Documents.zip (unknown)
Payment
The Service Manager issues a payment certificate under core clause 51.1.
The contractor then submits a tax invoice following the Employer's procedures set out in the Service Information.
The invoiced amount must equal the amount certified for payment.
Pricing
Quantities shown in the price list are provided for pricing and evaluation purposes.
Compliance Requirements
Source: E3804GXPOU Tender Documents.zip (unknown)
Registration
CSD registration number: required to access the eTendering portal.
Returnable forms
E-Tendering Training Acknowledgement Form (Annexure M): confirms the bidder can operate the eTendering system; omission or incomplete completion is fatal to the bid.
C1.1 Form of Offer and Acceptance: binds the tenderer to the offer on signature by an authorised representative.
PAYE Questionnaire pack (240-72909399): classifies the contractor as independent contractor, personal service provider, labour broker or dependent contractor. Unsigned affidavits result in PAYE being withheld from payments.
B-bbee
The contractor must notify the Employer within 7 days of any change to legal status, ownership or business composition that alters its B-BBEE status.
An updated verification certificate and supporting documents must reach the Service Manager within 30 days of that notification, or as the Service Manager directs.
If the B-BBEE status drops below the level held at the Contract Date, the Employer may renegotiate or terminate the contractor's obligation to provide the service.
Failure to report a change in B-BBEE status is itself grounds for termination.
Joint ventures and consortia
Members are jointly and severally liable to the Employer for contract performance.
The contractor must tell the Service Manager, within two weeks of the Contract Date, which key person is authorised to bind it.
The composition of a joint venture, consortium or other grouping may not change without the Employer's written consent.
Confidentiality
Information arising from or in connection with the contract may not be disclosed.
Section
Source: E3804GXPOU Tender Documents.zip
Quantities set out in the price list are supplied for tender pricing and evaluation purposes.
Document1. Invitation to Tender (ITT) E3804GXPOU.pdfReview complete
Description
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf
Eskom Holdings SOC Ltd invites open tenders for the in-situ inspection and non-destructive testing of generator coil retaining rings, with technical reporting, at Acacia and Port Rex Power Stations.
Work is called off as required under a term service arrangement.
The contract form is the NEC3 Term Service Contract (TSC).
Supporting documents issued with the invitation include the scope of work (Annexure N), the technical evaluation strategy (Annexure P), quality returnables (Annexure R) and OHS returnables (Annexure S).
Important Dates
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf (RFP)
Closing
Date and time: 7 December 2026 at 10:00.
Late submissions are not accepted.
Clarification meeting (non-compulsory)
Date and time: 23 November 2026 at 14:00.
Platform: Microsoft Teams.
Meeting ID: 347 680 144 579 733 2.
Passcode: tL6AV2Xm.
Bidders intending to attend must confirm with the Eskom Representative, giving the name, position and contact details of each attendee.
Enquiries
Clarification questions must reach Eskom by 3 working days before the tender closing deadline.
Validity
Tender validity: 120 days from the closing date and time.
Issue
Tender issued: 17 November 2026.
Contact Information
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf (RFP)
Eskom Representative (all queries and clarifications)
Method: Eskom Tender Bulletin e-tendering site (electronic upload only)
Query rules
All questions must be submitted in writing to the Eskom Representative.
No other Eskom official may be approached for clarification.
Submission Guidelines
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf (RFP)
Submission channel
Method: electronic upload only, via the Eskom Tender Bulletin e-tendering site.
No hard copy submissions will be accepted.
No zipped or compressed files may be uploaded.
All documents must be in PDF; the pricing schedule must be supplied in PDF and an additional copy in Excel.
Upload limits: 500 MB per document, 4 GB total per submission.
Documents must be placed in the correct folders: Technical, Commercial, Financial and Other.
Confirm the submission status shows as complete before the deadline.
If a bidder resubmits, only the latest version is considered; earlier submissions become void.
Late submissions are rejected.
Returnable documents — disqualifiable if not completed, signed and uploaded by the closing time
Annexure A (Authorisation Form): confirms the named signatory may bind the bidder, supported by a certified board, members', trustees' or JV resolution.
Annexure B (Acknowledgement Form): confirms acceptance of Eskom's tender terms.
Annexure C (Tenderer's Particulars): records the bidder's company and contact details.
Annexure D (Integrity Pact Declaration): commits the bidder to Eskom's Supplier Integrity Pact.
Annexure E (CPA for local goods/services) and Annexure F (CPA(IG) for imported goods/services), where applicable.
Annexures G1 to G4 (SBD 6.2 local production and content declarations), only where designated materials apply.
Annexure H (SBD 1 Invitation to Bid): the signed offer cover page.
Annexure J (SBD 4 Bidder's Disclosure): discloses interests held by state employees or persons connected to the evaluation.
Completed NEC3 Term Service Contract (Annexure O).
Completed pricing schedule in PDF plus Excel.
Proof of CSD registration (CSD number or CSD report).
Returnables scored but not disqualifying
Annexure I (SBD 6.1 Preference Points Claim): a missing or unsupported claim scores zero for specific goals rather than disqualifying the bid.
Annexure L (E-tendering Help Manual acknowledgement) and Annexure M (E-tendering Help Manual).
Returnables that may be requested after closing
Items marked non-disqualifiable may be called for in writing within 5 working days; failure to deliver them within that period results in disqualification.
Other required documents
Annexure K (Tax Evaluation Questionnaire): establishes whether the entity is a personal service provider for PAYE purposes.
Tax clearance: a certified copy is required from local bidders who have not supplied a SARS e-filing PIN or CSD profile, and from foreign bidders with a South African footprint that are not CSD-registered.
Employment Equity: designated employers must show proof of compliance and of submission of the EE report to the Department of Labour (South African bidders only).
Annexure N (Scope of Work), Annexure P (Technical Evaluation Strategy), Annexure Q (SDL&I Strategy Setting Template), Annexure R (Quality Tender Returnables) and Annexure S (OHS Tender Returnables).
Joint ventures must add a JV or consortium agreement showing each party's rights, obligations and profit share, confirmation that the JV operates as a single entity for the contract, and details of a single JV bank account independent of the individual partners.
Evaluation Criteria
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf (RFP)
Evaluation order
Stage 1: eligibility and basic compliance screening.
Stage 2: functionality, scored against Annexure P (Technical Evaluation Strategy).
Stage 3: price and specific goals, combined and ranked on the 80/20 preference system.
Stage 4: contractual requirements verified after ranking, before award.
Functionality
Minimum qualifying score: 70%.
Bidders below the threshold are not evaluated further.
Price and preference
Price: 80 points.
Specific goals: 20 points, claimed on SBD 6.1 under the PPPFA.
Price is evaluated inclusive of VAT, corrected for arithmetic errors, and excluding contingencies in any bill of quantities or activity schedule.
Adjusted for acceptable variations and deviations, and compared on net present value using the tendered programme, price adjustment factors and exchange-rate movement where relevant.
Unconditional discounts are taken into account; conditional discounts are applied only at payment stage.
A specific goals claim that is not supported by evidence scores zero points but does not disqualify the bid.
Not applied
Objective criteria: not applicable.
Reverse e-auction: not applicable.
Alternative tenders: not permitted.
The tender is for the whole contract; partial offers are not accepted.
Technical Specifications
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf (RFP)
Scope
In-situ inspection and non-destructive testing (NDT) of generator coil retaining rings.
Includes technical reporting on the inspection findings.
Sites: Acacia Power Station and Port Rex Power Station.
Contract basis: as-required, under an NEC3 Term Service Contract (TSC).
Technical submission
Detailed functionality and technical requirements are set out in Annexure P (Technical Evaluation Strategy).
Scope of work is set out in Annexure N.
Quality
Category 3 quality criteria listing all returnables must be submitted.
Category 3 Form A for Section C of the criteria must be submitted.
The successful bidder may be required to supply cataloguing information per item after award and to label all materials to Eskom's labelling specification.
Where cataloguing applies, the pricing schedule must carry a priced line item for it; Eskom pays for cataloguing.
Subcontracting
Subcontracting 100% of the scope is not permitted.
Subcontracting to a subsidiary is discouraged and must be declared in the tender.
Experience & Qualifications
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf
Personnel competency
OHS competency must be demonstrated through CVs and qualification certificates for the personnel proposed.
Technical capability
Functionality and technical capability are assessed against Annexure P (Technical Evaluation Strategy), with a minimum qualifying score of 70%.
Transformation
Bidders must complete the SDL&I Strategy Setting Template (Annexure Q) setting out their supplier development, localisation and industrialisation commitments.
Quality Management
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf
Quality returnables (Annexure R)
Category 3 quality criteria listing all returnables.
Category 3 Form A for Section C of the criteria.
Compliance with quality management specification 240-105658000 (previously QM58).
Assessment
Quality requirements form part of the SHEQ contractual requirements verified after evaluation and before award.
Failure to meet them by the stipulated deadline may render the bid non-responsive.
Pricing Schedule
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf
Pricing submission
Completed pricing schedule or bill of quantities (Annexure O), where not already contained in the NEC3 Term Service Contract.
Submit in PDF and an additional copy in Excel.
Upload limits: 500 MB per document, 4 GB total.
Evaluation of prices
Evaluated inclusive of VAT and corrected for arithmetic errors.
Contingencies in any bill of quantities or activity schedule are excluded.
Adjusted for acceptable variations and deviations and compared on net present value using the tendered programme, price adjustment factors and exchange-rate movement where relevant.
Unconditional discounts count for evaluation; conditional discounts are applied only at payment.
Price carries 80 of the 100 points.
Cataloguing
Where cataloguing is required, a priced line item for cataloguing must be included in the pricing schedule.
Financial Requirements
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf (RFP)
Pricing
Pricing schedule (Annexure O) must be completed and submitted in PDF with an additional Excel copy.
Prices are evaluated inclusive of VAT.
Contingencies in any bill of quantities or activity schedule are excluded from evaluation.
Unconditional discounts count for evaluation; conditional discounts are applied only when payment is made.
Payment terms
Contracts below R50 000 000 including VAT: payment within 30 days of receipt of undisputed invoices.
Contracts above R50 000 000 including VAT: payment within 60 days of receipt of undisputed invoices.
Security
Provision of security for performance: not applicable.
Financial capacity evidence (due diligence, before award)
Latest approved annual financial statements of the tendering company itself, not of a parent or ultimate holding company; drafts and management accounts are not accepted.
Statements must include company background, a signed directors' report, a signed auditor's, reviewer's, compiler's or accounting officer's report, the statement of financial position, statement of comprehensive income, statement of changes in equity, statement of cash flows and the notes.
South African entities that are not audited must also submit a signed public interest score showing the actual score, whether the company is owner-managed, and whether the statements were externally prepared, plus ITA34C copies for the current and previous years of assessment.
Each partner in an unincorporated joint venture or special purpose vehicle must submit its own annual financial statements covering the same items.
Price negotiation
Eskom reserves the right to negotiate with preferred bidders where tendered prices are not market-related.
Compliance Requirements
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf (RFP)
Eligibility
The bidder, its principals and proposed subcontractors must not be nationals of, or constituted under the laws of, a country on an international sanctions list.
No bidder may submit more than one tender, whether alone or as a JV partner.
Joint ventures must state in the JV agreement that the parties are jointly and severally liable for the contract.
A conflict of interest disqualifies the bid; common controlling shareholders or relationships giving access to another bidder's information are prima facie evidence of conflict.
Tenders signed by unauthorised persons are rejected.
Bidders restricted by National Treasury, on the Tender Defaulters list, or restricted by Eskom are excluded.
Subcontracting 100% of the scope of work is not permitted.
Registration and tax
Proof of CSD registration (CSD number or CSD report) is a mandatory contractual requirement.
A certified tax clearance certificate is required where a SARS e-filing PIN or CSD profile has not been supplied, and from foreign bidders with a South African footprint that are not CSD-registered.
Foreign suppliers with no South African footprint complete SBD 1 only and need not prove tax compliance.
B-BBEE and specific goals
B-BBEE status is evidenced by a certificate from an authorised body or person, a sworn affidavit under the B-BBEE Codes of Good Practice, or another prescribed instrument.
Specific goals carry 20 of the 100 evaluation points and are claimed on SBD 6.1 (Annexure I).
Failure to submit supporting evidence for a claim scores zero for that goal but does not disqualify the bid.
Construction and transformation
CIDB grading: not applicable.
Contract Skills Development Goals: not applicable.
Contract Participation Goals: not applicable.
Occupational health and safety
Signed acknowledgement of Eskom's OHS legal and other requirements (Annexure B of the OHS returnables).
OHS plan addressing the specific risks of the scope of work.
Detailed, itemised costing for OHS management; a lump sum is not accepted.
Baseline OHS Risk Assessment covering identification, assessment and management of risks, including the assessment methodology used.
Valid Letter of Good Standing (COIDA or equivalent).
OHS policy signed by the CEO, compliant with Section 7 of the OHS Act.
OHS competency evidence: CVs and qualification certificates.
Employment equity
Designated employers must provide proof of compliance with the Employment Equity Act, including proof of submission of the EE report to the Department of Labour (South African bidders only).
Contractual requirements verified before award
CSD registration, SHEQ requirements and financial viability are assessed after evaluation and ranking; failure to meet them by the stipulated deadline may render the bid non-responsive.
Health & Safety
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf
OHS returnables (Annexure S)
Signed acknowledgement of Eskom's OHS legal and other requirements (Annexure B of the OHS pack).
Occupational health and safety plan addressing the specific risks of the scope of work and aligned to Eskom's health and safety requirements.
Detailed OHS costing, broken down by item; a lump sum is not accepted.
Baseline OHS Risk Assessment identifying, assessing and managing the risks of the scope, submitted with the assessment methodology used.
Valid Letter of Good Standing (COIDA or equivalent).
OHS policy signed by the CEO and compliant with Section 7 of the OHS Act.
OHS competency evidence in the form of CVs and qualification certificates.
Status
SHEQ requirements are contractual requirements assessed after evaluation and ranking, before award.
Contractual Terms
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf
Contract form
NEC3 Term Service Contract (TSC), completed and submitted with the tender.
Eskom's Standard Conditions of Tender apply and are deemed accepted by submitting a tender; the Tender Data takes precedence where the two conflict.
Duration and validity
Tender validity is 120 days from the closing date and time.
Services are rendered on an as-required basis at Acacia and Port Rex Power Stations.
Payment
Below R50 000 000 including VAT: payment within 30 days of receipt of undisputed invoices.
Above R50 000 000 including VAT: payment within 60 days of receipt of undisputed invoices.
Other conditions
Performance security: not applicable.
Alternative tenders are not permitted.
The tender is for the whole contract.
Eskom may negotiate with preferred bidders where prices are not market-related.
Subcontracting to a subsidiary must be declared; subcontracting the entire scope is prohibited.
Section
Source: 1. Invitation to Tender (ITT) E3804GXPOU.pdf
Functionality
Assessed against Annexure P (Technical Evaluation Strategy).
Minimum qualifying score: 70%; bidders below it are excluded from further evaluation.
Price and specific goals
Price: 80 points.
Specific goals: 20 points under the PPPFA.
Combined score determines ranking, highest to lowest, on the 80/20 system.
An unsupported specific goals claim scores zero for that goal without disqualifying the bid.
Contractual requirements
CSD registration, SHEQ and financial viability are not scored; they are verified after ranking and before award.
Failure to meet them by the stipulated deadline may make the bid non-responsive.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.