Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Bid(Open-Tender)
Delivery Location
1 REFINERY ROAD - DURBAN - DURBAN - 4001
Organization Type
GOVERNMENT
Published
20 Nov 2026
OCDS Reference
ocds-9t57fa-179196
Cef (soc) ltd is appointing a service provider to deliver non-destructive testing (ndt) services at the sanpc refinery in durban over three years, covering maintenance, project and shutdown work. The contractor must supply all labour, equipment, consumables and transport, and work is paid per the schedule of rates. Bidders must meet strict mandatory requirements (including iso 9001, sahpra radiation officer appointment and certified ndt personnel), pass a 70% technical threshold, and compete on an 80/20 price and specific-goals evaluation. The most consequential consideration is the mandatory phase 1 compliance – failure on any item disqualifies the bid.
Closing: 10 December 2026 at 12:00 midday, emailed to [email protected]. Late emails, links in the submission, or copying any CEF SCM representative on the email cause disqualification.
Mandatory Phase 1 documents (any missing item disqualifies): valid Compensation Fund certificate; OHS-compliant safety policy; Radiation Emergency Plan under the Atomic Energy Act; ISO 9001:2015 certificate issued by SACAS; SAHPRA appointment of a Radiation Protection Officer; NDT equipment list with calibration certificates; and personnel certified per ANSI/ASNT CP-9712 or EN ISO 9712.
Technical evaluation requires a minimum 70% score. Weighted criteria: company experience (20%), client references (20%), project lead experience (30%), team experience (20%) and team structure (10%). Reference letters must be signed, dated and on client letterhead – otherwise they score zero.
Pricing is per the Schedule of Rates and bill of quantities; all NDT work is all-inclusive labour rates. Price scores 80 points using the formula PS = 80(1 − (Pt − Pmin)/Pmin); specific goals (B-BBEE and ownership categories) score up to 20 points via SBD 6.1.
Returnable documents (all must be submitted): Part 3 Proposal Form, Part 4 Board Resolution, Part 5 Certificate of Acquaintance with RFP Documents, Part 6 Certificate of Acquaintance with Scope of Work, Part 7 Breach of Law Form, SBD 1, SBD 4, SBD 6.1, valid SARS tax compliance status and Tax PIN, valid B-BBEE affidavit/certificate, and CSD Summary Report or supplier number.
Technicians must hold SAQCC Level II (or ASNT Level II) in UT, RT, MT and PT, have at least 3 years refinery experience, and be certified for the Microdur hardness tester. Two responsible persons for radiography must reside within 50 km of the refinery in Durban.
A standby crew must respond to after-hours and weekend emergencies within 4 hours. The contract period is 3 years; the tender offer must remain valid for 120 days from closing (until 09 April 2027).
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Date & Time
Thursday, 10 December 2026 - 12:00
Venue
null
Categories
Request for Bid(Open-Tender)
1 REFINERY ROAD - DURBAN - DURBAN - 4001
Tenders in this industry often require registration with these bodies.
Recommended Certifications
Having these can improve your winning chances: APSO Membership, Services SETA Accreditation
AI Document Analysis Stages
Description
Source: For Issue.zip20 Nov
2026
Tender Published
Tender was published
10 Dec
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
For Issue.zip
CEF (SOC) Ltd, on behalf of SANPC Refinery, requires a service provider for non-destructive testing (NDT) services over a three-year period. The scope covers radiography (digital and conventional), ultrasonic testing, magnetic particle testing, positive material identification, delta ferrite testing, liquid dye penetrant testing, and hardness testing, including all labour, equipment, consumables, and safety compliance. Bidders must meet mandatory requirements, pass a technical evaluation with a minimum threshold of 70%, and then be evaluated on price (80 points) and specific goals (20 points).
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
CEF (Pty) LtdMatched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubWe refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
The tender covers the appointment of a service provider for non-destructive testing (NDT) services at the SANPC Refinery over three years. The scope includes maintenance, project and shutdown work, with all inspection requirements. The contractor must supply all labour, supervision, consumables, materials, equipment, instruments, tools, services and transport. Materials must conform to SANPC Refinery standards. Work is measured and paid per the Schedule of Rates. All work must comply with SANPC Refinery rules and regulations, including the Hazardous Substances Act.
Important Dates
Source: For Issue.zip (RFP)Closing date: 10 December 2026 at 12:00 (midday)
Tender validity: 120 days from closing date (until 09 April 2027)
Briefing session: none
Contact Information
Source: For Issue.zip (RFP)Procurement submissions email: [email protected]
Technical and procurement queries:
After the closing date, bidders may only communicate with the Procurement Department on matters relating to this RFP.
Submission Guidelines
Source: For Issue.zip (RFP)Submission method: email only, to [email protected]. Late emails are disqualified. Links in the submission are not accepted and will lead to disqualification. Bidders must not copy or blind copy any CEF SCM representative on the submission email; doing so disqualifies the bid.
Returnable documents — all must be completed, signed and submitted with the proposal:
Disqualification risks:
Evaluation Criteria
Source: For Issue.zip (RFP)Evaluation is in three phases:
Phase 1 – Mandatory requirements (pass/fail). Failure on any item disqualifies the bid:
Phase 2 – Technical evaluation (minimum threshold 70%). Weighted criteria:
Phase 3 – Commercial evaluation (80/20 split):
CEF reserves the right to undertake post-tender negotiations with short-listed bidders and to award to the highest scoring bidder unless objective criteria justify otherwise.
Technical Specifications
Source: For Issue.zip (RFP)Scope: Provision of non-destructive testing (NDT) services at the SANPC Refinery, covering maintenance, project and shutdown work. Work is measured and paid per the Schedule of Rates.
NDT methods required:
Contractor obligations:
Work prioritisation:
Administration:
Division of responsibilities (contractor vs SANPC):
Drawings/sketches may be issued by SANPC as required.
Financial Requirements
Source: For Issue.zip (RFP)Pricing: Work is measured and remunerated based on the Schedule of Rates. All NDT work is all-inclusive labour rates. The contractor must price per the Schedule of Rates and bill of quantities. Price is scored out of 80 points using the formula PS = 80 (1 − (Pt − Pmin)/Pmin). No bid security, bond, guarantee or retention amounts are stated.
Compliance Requirements
Source: For Issue.zip (RFP)Mandatory compliance documents (Phase 1, failure disqualifies):
Other compliance:
Section
Source: For Issue.zipEvaluation is in three phases: Phase 1 mandatory requirements (pass/fail), Phase 2 technical evaluation (minimum threshold 70%), Phase 3 commercial evaluation on price (80 points) and specific goals (20 points). Technical criteria cover company experience (20%), client references (20%), project lead experience (30%), proposed team experience (20%), and team structure (10%).
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
152 Ann Cres, Strathavon, Sandton, 2031, South Africa
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
1
Last checked
20 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Contact
010-201-4793[email protected]www.cefgroup.co.za/contact-us152 Ann Cres, Strathavon, Sandton, 2031, South Africa
Key Personnel
Median Estimate
R 998 000
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Get deep intelligence on Administrative and support activities. Unlock full pricing strategies, bid frequency, and historical win rates.
Learn how to submit a winning bid with these related articles
Limpopo is a mining powerhouse in South Africa. Learn how to identify and bid for mining support services tenders, understanding the role of major players like Anglo American, Exxaro, and the provincial government in creating supply chain opportunities.
A logistical guide to winning and managing multi-year contracts for laptop supply and ICT maintenance in Gauteng public schools.
Most South African tender disqualifications are administrative, not technical. Learn the three evaluation gates, the returnables that fail most often, and a pre-submission audit that catches errors before the buyer does.
Inside the North West's February 2026 procurement cycle. Analysis of the surge in institutional security contracts, administrative supply chain consolidation, and the province's strategic investment in community healthcare support.
💡 Want more tendering tips and strategies?
Explore Our Blog