Manufacture and supply ex-works of 6mm² concentric cable (tinned copper and coated steel) for ESKOM distribution, central east cluster (kwazulu-natal and free state) – 2-year as-and-when contract
KwaZulu Natal and Free State Operating Units - NEW GERMANY - KZN and FS OU - 3610
Organization Type
GOVERNMENT
Published
20 Nov 2026
OCDS Reference
ocds-9t57fa-179175
Summary
ESKOM requires the manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for its distribution, central east cluster, covering the kwazulu-natal and free state operating units. The contract runs for two years on an 'as and when' required basis. Bids must be submitted electronically via the ESKOM etendering system before the closing time; the most consequential consideration is that all mandatory returnables and compliance documents must be uploaded and finalised before 08:00 sast on 7 december 2026, as late or incomplete submissions are disqualified.
Key Requirements
Closing deadline: 7 December 2026 at 08:00 SAST – electronic submission only via https://eTendering.eskom.co.za; the system blocks any changes or finalisation after this time.
CSD registration is mandatory to access the eTendering portal and submit a bid.
B-BBEE: a valid certificate/affidavit or CSD report must be provided at closing to claim preference points; if absent, the bidder scores zero for B-BBEE but is not disqualified (unless fraudulent or expired, which causes disqualification).
CIDB: if CIDB grading is stipulated as a qualification criterion, the bidder must be registered at closing or capable of registration within 21 working days after closing; proof of registration is mandatory at closing (or proof of application plus actual printout by contract award).
SHEQ: proof of safety, health, environmental and quality systems, policies and capabilities must be provided to Eskom's satisfaction at closing and/or contract award; all SHEQ costs must be included in the tender.
Mandatory returnables: Acknowledgement Form, Supplier Integrity Pact Integrity Declaration Form, and any other forms listed in the Invitation to Tender must be completed, signed and submitted by closing time; the SDL&I Undertaking must be submitted by contract award.
Disqualification risks: submitting after closing, failing to finalise the electronic submission, missing mandatory returnables, misrepresentation/falsification, subcontracting 100% of the scope, or failing to attend a compulsory site visit/clarification meeting if one is stipulated.
The manufacture and supply ex-works of estimated quantities of 6mm2 (tinned cu and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu Natal and Free State Operating Units) on an “as and when” required basis for a period of two (2) years.
Tender context
Return to this tender’s issuing organisation, province, or category.
The manufacture and supply ex-works of estimated quantities of 6mm2 (tinned cu and coated steel) concentric cable for distribution, central east cluster (kwazulu natal and free state operating units) on an “as and when” required basis for a period of two (2) years.
Briefing Session
Date & Time
Monday, 07 December 2026 - 10:00
Venue
Microsoft Teams meeting - https://teams.microsoft.com/meet/3913345704702080?p=hyNqnxv9Fmow47BrVp
Document read. The full tender notice and its supporting documents are read end-to-end. Key sections, requirements, dates, and contact details are identified and pulled into a working summary you can act on.
Compliance review. The working summary is checked against South African procurement standards — PFMA, PPPFA, B-BBEE, CIDB, local content, and preferential procurement — so nothing critical is missed before you start your bid response.
DocumentSection 4 - Safety.zipReview complete
Description
Source: Section 4 - Safety.zip
Important Dates
20 Nov
2026
Tender published
Tender Published
Tender was published
07 Dec
2026
Submission deadline
Closing Date
Tender closing date
Procurement Rules & Compliance ContextThis tender may be governed by South African public procurement rules covering fairness, transparency, preferential procurement, anti-corruption, administrative justice and access to information.
10 rules
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
Core procurement rules
These rules commonly apply to South African public-sector procurement.
7
Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
high
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Constitution of the Republic of South Africa, 1996 – Section 217
Act 108 of 1996 (s217)
high
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
Eskom requires the manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for its Distribution Central East Cluster (KwaZulu-Natal and Free State Operating Units), on an 'as and when' required basis for a period of two years.
E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
Eskom requires the manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for its Distribution Central East Cluster (KwaZulu-Natal and Free State Operating Units) on an 'as and when' required basis for a period of two years. The tender is open to manufacturers, distributors, and resellers, with the possibility of multiple contracts being awarded.
Section 3 - Supplier Development, Localisation and Industrialization.zip
Eskom seeks a manufacturer to supply, ex-works, estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for its Distribution Central East Cluster (KwaZulu-Natal and Free State Operating Units) on an 'as and when' required basis for two years. The tender includes mandatory local content requirements, B-BBEE preference points, and socio-economic development obligations.
Eskom requires the manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for its Distribution Central East Cluster (KwaZulu-Natal and Free State Operating Units) on an 'as and when' required basis for a period of two years.
Eskom seeks a supplier to manufacture and supply, ex-works, estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for distribution networks in the Central East Cluster (KwaZulu-Natal and Free State Operating Units). The contract runs on an 'as and when' required basis for two years. The tender includes mandatory quality management requirements, including ISO 9001 certification, a Contract Quality Plan, and Quality Control Plans.
Win Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Similar Tenders
Matched by category & region
Supplier Readiness Hub
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
BIDDERS LIST - CALIBRATION, SERVICE AND AD HOC MAINTENANCE OF CHEMICAL SERVICES LABORATORY EQUIPMENT FOR A PERIOD OF FIVE (5) YEARS AT LETHABO POWER STATION
Supplies: GeneralFind supplies: general tenders and contract opportunities in South Africa. Browse active government procurement opportunities updated daily.
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
Bid-ready summary. The submission guidelines, evaluation criteria, technical, financial, and compliance sections are refined into professional, easy-to-scan prose. This is the final version you can rely on when preparing your bid or briefing your team.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Document read
Compliance review
Bid-ready summary
The tender is for the manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu-Natal and Free State Operating Units), on an as-and-when required basis for a period of two years.
Important Dates
Source: Section 4 - Safety.zip (unknown)
Closing date: 7 December 2026 at 08:00 (from tender record).
Submission Guidelines
Source: Section 4 - Safety.zip (unknown)
Returnable documents:
Annexure B (Acknowledgement Form for Eskom OHS legal and other requirements): signed by the CEO or a director and two witnesses, confirming understanding of and commitment to the listed OHS and related legislation.
Annexure C2 (SHE Tender Evaluation and Scoring Card – Concentric Cable): completed and submitted with the required SHE documents.
Required SHE documents (each must be submitted and satisfy minimum content requirements):
Health and Safety Plan covering incident management, SHE communication, emergency management and substance abuse management.
Baseline Risk Assessment covering risk factors and controls.
Valid Letter of Good Standing.
SHE policy, signed and with a review date.
Submission method and address: not stated in the provided document.
Disqualification risks:
Any required document not submitted, or submitted without meeting the minimum content requirements, scores 0 on the SHE evaluation card.
Evaluation Criteria
Source: Section 4 - Safety.zip (unknown)
SHE evaluation (Annexure C2) is for a low-risk category. Each of the five required SHE documents is scored 0 (not submitted) or 1 (submitted and satisfies minimum requirements). The sub-score is the actual score divided by 5. The overall result is marked compliant or non-compliant. Non-compliance with OHS requirements may result in penalties.
Technical Specifications
Source: Section 4 - Safety.zip (unknown)
Scope: manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu-Natal and Free State Operating Units), on an as-and-when required basis for a period of two years.
Contract period: two years.
Delivery: ex-works (buyer collects from supplier's premises).
Compliance Requirements
Source: Section 4 - Safety.zip (unknown)
The supplier must comply with the following when working at or rendering a service to Eskom:
Eskom Commercial Process 32-1034
Occupational Health and Safety Act
Compensation for Occupational Diseases and Illnesses Act
Employment Equity Act
Immigration Act No. 13 of 2002
Employment Service Act
National Environmental Management Waste Act
After contract award, the supplier must align its processes to Eskom's OHS policies, procedures and standards.
Penalties will be enforced on the main supplier for non-conformance with Eskom or statutory OHS requirements, including non-conformance by its contractors or suppliers.
All employees (contractors/suppliers) must undergo the relevant Eskom induction.
Management of contractors/suppliers:
The main supplier must demonstrate the process and selection criteria used when appointing contractors and suppliers.
The main supplier must notify Eskom before appointing contractors or suppliers for commencement of work.
The main supplier must ensure contractors/suppliers have adequate resources and competencies.
The main supplier is accountable for managing its contractors/suppliers to ensure compliance with applicable legal and Eskom requirements.
The main supplier must monitor contractors/suppliers through audits and assessments for OHS compliance during execution.
The main supplier must provide grounds for termination of work done by contractors/suppliers.
Non-conformances by contractors/suppliers (all tiers) are dealt with directly with the main supplier through performance and penalty processes.
Eskom may verify compliance and may require copies of testimonials/references and contact details of clients (including Eskom) for similar work.
DocumentSection 3 - Supplier Development, Localisation and Industrialization.zipReview complete
Contact Information
Source: Section 3 - Supplier Development, Localisation and Industrialization.zip (TENDER)
Business unit: Central East Cluster (KwaZulu-Natal and Free State Operating Units).
No named contacts, emails, telephone numbers, or submission addresses are stated in the provided document.
Submission Guidelines
Source: Section 3 - Supplier Development, Localisation and Industrialization.zip (TENDER)
Returnable documents (all must be completed, signed and submitted):
SDL&I Bidders Document (the supplier development, localisation and industrialisation commitments form).
Valid B-BBEE certificate issued by a SANAS accredited verification agency, or a valid sworn affidavit, or a CIPC-issued B-BBEE certificate for EMEs.
CIPC registration document.
Identity documents of owners/members/shareholders.
Share certificates where applicable.
Latest financial statements corresponding to the financial year end reflected on the sworn affidavit.
SBD 6.2 (Declaration for Local Production and Content).
Annexure C (Local Content Declaration – Summary Schedule).
Annexure D (Imported Content Declaration – Supporting Schedule to Annex C).
Annexure E (Local Content Declaration – Supporting Schedule to Annex C).
Proof of subcontracting agreement(s) and subcontractor B-BBEE certificates (only if subcontracting applies).
Submission method and address: not stated in the provided document.
Closing time: not stated in the provided document.
Evaluation Criteria
Source: Section 3 - Supplier Development, Localisation and Industrialization.zip (TENDER)
Evaluation is based on the 90/10 preference point system (price 90 points, specific goals 10 points).
Specific goals (maximum 10 points) are awarded according to B-BBEE status level:
Level 1: 10 points
Level 2: 9 points
Level 3: 6 points
Level 4: 5 points
Level 5: 4 points
Level 6: 3 points
Level 7: 2 points
Level 8: 1 point
Non-compliant: 0 points
Contract awarded to the tenderer scoring the highest total points (price + specific goals), rounded to two decimal places.
Failure to provide B-BBEE documentation does not disqualify the bid, but the bidder:
May score a maximum of 90 points for price.
Scores 0 points for specific goals.
Objective criteria (conditions for contract award):
Designated sector: This commodity (Electrical and Telecom Cables) is a designated sector with a mandatory local content threshold of 90%.
CIDB skills development: Not applicable.
National Industrial Participation Programme: Not applicable.
Mandatory subcontracting: Applies to contracts above R30 million. If applicable, a minimum of 20% of the contract value must be subcontracted to designated groups (EMEs/QSEs at least 51% black-owned, black youth, black women, black people with disabilities, black people in rural/underdeveloped areas or townships, cooperatives at least 51% black-owned, or black military veterans).
A supplier awarded a contract may not subcontract more than 25% of the contract value to any entity that does not have an equal or higher B-BBEE status level, unless the subcontractor is an EME with the capability to execute the work.
Technical Specifications
Source: Section 3 - Supplier Development, Localisation and Industrialization.zip (TENDER)
Scope: Manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu-Natal and Free State Operating Units).
Supply basis: "As and when" required basis for a period of two (2) years.
Designated sector: Electrical and Telecom Cables – local content threshold 90%.
Potential scope for subcontracting: Cable drums, packaging, transportation.
Financial Requirements
Source: Section 3 - Supplier Development, Localisation and Industrialization.zip (TENDER)
SDL&I penalty and performance security:
Eskom will apply a penalty of 2.5% of the Purchase Order Value for failure to meet SDL&I obligations.
Eskom will retain 2.5% of each invoice (excluding VAT) as security for the fulfilment of all SDL&I obligations.
Retained amounts are released only upon receipt of SDL&I progress reports, fulfilment of all SDL&I obligations, and submission of an approved compliance report by the SDL&I Department.
Skills development obligation: Successful supplier must deliver on 1 skill (from the listed N1–N6 Electrical Engineering qualifications) for every R3,000,000 invoiced to Eskom.
Compliance Requirements
Source: Section 3 - Supplier Development, Localisation and Industrialization.zip (TENDER)
B-BBEE requirements:
A valid B-BBEE certificate (SANAS accredited), a valid sworn affidavit, or a CIPC-issued B-BBEE certificate for EMEs is required to claim preference points and is a condition for contract award.
EMEs (annual total revenue ≤ R10 million) may submit a sworn affidavit.
QSEs (annual total revenue ≤ R50 million) must comply with all elements of the QSE scorecard relevant to their sector, unless at least 51% black-owned, in which case a sworn affidavit is acceptable.
Entities with annual total revenue above R50 million must submit a valid B-BBEE certificate.
B-BBEE improvement or retention plan:
Must be submitted within 30 days of signing the contract.
Bidders at Level 4 at award must achieve Level 3 by the end of the first year, then improve by one level each subsequent year.
Bidders at Level 5–8 or non-compliant must achieve Level 4 by the end of the first year, then improve by at least one level each year from the second year.
Local content:
Mandatory 90% local content for the designated product (Electrical and Telecom Cables).
SBD 6.2 and Annexure C are mandatory at contract award.
Sworn affidavit validity requirements:
Deponent name and ID number as per identity document.
Designation (director, owner, member) must be indicated.
Enterprise name as per CIPC registration and business address.
Percentage of black ownership, black female ownership, and designated group must be stated (no blank spaces).
Total revenue for the year under review and whether based on audited financial statements or management accounts.
Financial year end must be stated.
B-BBEE status level (only one level).
Empowering supplier status must be indicated.
Deponent and Commissioner of Oaths must sign on the same date.
Commissioner of Oaths cannot be an employee or ex officio of the enterprise.
Affidavits attested with a "true copy" stamp will not be accepted.
Section
Source: Section 3 - Supplier Development, Localisation and Industrialization.zip
Specific goals (maximum 10 points) are awarded based on B-BBEE status level as per the 90/10 preference point system. The points for specific goals are added to the price points, and the contract is awarded to the tenderer with the highest total. Bidders who fail to provide B-BBEE documentation may score a maximum of 90 points for price and 0 points for specific goals.
DocumentE3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdfReview complete
Description
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
The tender is for the manufacture and supply ex-works of estimated quantities of 6mm2 (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu Natal and Free State Operating Units), on an "as and when" required basis for two years. Open to all tenderers including manufacturers, distributors, resellers.
Important Dates
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf (TENDER)
Closing date: 07 December 2026 at 10h00
Clarification meeting (non-compulsory): 26 November 2026 at 8h00, via Microsoft Teams (link provided in tender; Meeting ID: 391 334 570 470 208 0, Passcode: xJ9ub35k)
Tender validity: 120 days from closing date and time
Clarification queries deadline: 5 working days before tender submission deadline
Contact Information
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf (TENDER)
Tender documents also available on Eskom Tender Bulletin (https://tenderbulletin.eskom.co.za) and National Treasury e-Tender Portal (https://www.etenders.gov.za)
Submission Guidelines
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf (TENDER)
Submission method: electronic via Eskom E-tendering site (https://etendering.eskom.co.za).
Upload all documents in PDF format; per-document upload limit 500 MB, total submission limit 4 GB.
No zip or compressed files accepted.
If resubmitting, only the latest version is accepted; earlier submissions become void.
Ensure submission status is marked complete.
Late tenders are not accepted.
Returnable forms (must be completed, signed and submitted):
Annexure A (Authorisation Form): authorises the signatory to bind the bidder.
Annexure B (Acknowledgement Form): acknowledges receipt and acceptance of tender conditions.
Annexure C (Tenderer's Particulars): bidder identification and contact details.
Annexure D (Integrity Declaration Form): commits to ethical conduct and no collusion.
Annexure E (CPA for Local Goods/Services): confirms acceptance of Eskom's contract price adjustment proposal for local goods/services, or submit an alternative CPA proposal.
Annexure F (CPA(IG) for Foreign Goods/Services): required if foreign goods/services are offered.
Annexure G (SBD 1 Invitation to Bid): the offer cover page with bidder details.
Annexure H (SBD 6.1 Preference Points Claim): claims B-BBEE preference points under PPPFA 2022 regulations.
Annexure I (SBD 4 Bidders Disclosure): discloses any connection to state employees.
Annexure J (E-tendering Training Acknowledgement): confirms training on the e-tendering system.
Annexure K1 (SBD 6.2 Declaration for Local Production and Local Content): declares local content percentage.
Annexure K3 (Imports Declaration): supporting schedule for imported content.
Annexure K4 (Local Content Declaration - Supporting Schedule): supporting schedule for local content.
NEC3 Supply Contract, including pricing schedule and contract data: the contract form, must be completed and signed.
Disqualification risks:
Missing or unsigned mandatory returnables (marked with
in the tender) at closing time.
Submitting more than one tender (except as part of a JV/consortium).
Conflict of interest, being on any sanctions list, National Treasury restriction, Tender Defaulters list, or Eskom restriction.
Subcontracting 100% of the scope of work.
Tenders signed by non-authorised persons.
JV/consortium agreements that do not state joint and several liability.
Alternative tenders are not allowed.
Non-disqualifiable returnables (if not submitted at closing, Eskom will request them in writing; must be submitted within 5 working days of the request, otherwise disqualification):
Annexures A, B, C, D, F, G, I, J, K1, K2 as listed above.
Required prior to contract award:
Proof of valid and current CSD registration (CSD number/CSD report).
Tax clearance certificate (for local tenderers not on CSD or without SARS e-filing PIN; foreign suppliers with no SA footprint only need SBD 1).
Employment Equity compliance proof (for South African designated employers).
Evaluation Criteria
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf (TENDER)
Evaluation stages:
Basic compliance (Level 1): must meet all eligibility criteria and submit all mandatory returnables. Failure results in disqualification.
Technical evaluation (Level 2): scored out of 100%. Minimum threshold: 90%. Only bidders achieving 90% proceed to factory and sample verification.
Factory and sample verification: sample must achieve 80% to be considered compliant.
Price evaluation: scored out of 90 points.
Specific goals (B-BBEE): scored out of 10 points.
Technical functionality criteria (weights):
Routine testing and type testing: 40%
Technical schedules for concentric cable: 30%
Drawings: 12%
Packaging: 18%
Total: 100%, threshold: 90%
Price evaluation:
Prices evaluated inclusive of VAT, corrected for arithmetical errors, excluding contingencies.
Unconditional discounts considered; conditional discounts applied at payment.
Prices scored out of 90 points.
Specific goals (B-BBEE) points (90/10 system):
Level 1: 10 points
Level 2: 9
Level 3: 6
Level 4: 5
Level 5: 4
Level 6: 3
Level 7: 2
Level 8: 1
Non-compliant: 0
Preference point system: 90/10 (tender value above R50 million).
Contract award: to the tenderer with the highest combined price + specific goals score. If more than one supplier is acceptable for a line item, two may be appointed with allocation based on price variance: 0% variance 50/50, 1-5% variance 60/40, 6-10% variance 70/30. Higher variance negotiated; if not reduced, Eskom may re-issue.
Contractual requirements (CSD, safety, quality, SDL&I, financial) are assessed after ranking; recommended supplier must provide proof before award. If shortcomings, 7 working days to correct.
Technical Specifications
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf (TENDER)
Scope: Manufacture and supply ex-works of estimated quantities of 6mm2 (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu Natal and Free State Operating Units).
Basis: "as and when" required, for a period of two (2) years.
Open to all tenderers including manufacturers, distributors, resellers.
Technical standard: 240-61704085 - Standard for concentric service cable with tinned copper and coated steel.
The tender may result in single or multiple contracts; if two suppliers appointed, allocation based on price variance as described in evaluation.
Local content requirements apply (National Treasury Designated Sectors Circular No -2020-Electrical Cable Products).
Methodology
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
Skills development commitment (SDL&I):
The supplier must deliver one skill for every R3 million invoiced to Eskom.
Skills must be selected consecutively from a list: N1, N2, N3 Electrical Engineering; N4, N5, N6 Industrial/Mechanical Engineering (FET/TVET College).
Development involves the tenderer directly and through its supply network; SETA-accredited training providers may be approached for critical and scarce skills.
Quality Management
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
Quality requirements (contractual, assessed before award):
Option 1: Valid ISO 9001 certification by an accredited body, with scope relevant to the product.
Option 2: Evidence of QMS in operation, including documented roles/responsibilities, control of external providers, internal audit reports, certification audit report (not older than 12 months), management review records.
Draft Contract Quality Plan specific to scope (ref ISO 10005).
Quality Control Plan / Inspection and Test Plan (QCP/ITP) for similar work.
Form A completed and signed.
Refer to tender quality requirements documents 240-105658000 and 240-109253698.
Pricing Schedule
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
Pricing schedule: part of the NEC3 Supply Contract, must be completed and signed.
Prices evaluated inclusive of VAT, corrected for arithmetical errors, excluding contingencies.
Unconditional discounts considered; conditional discounts applied at payment.
For tenders combining local and imported goods/services, the response must be separated into components as per the Price Schedule. Local procurement content is total spending minus imported component.
Contract Price Adjustment (CPA) applies: accept Eskom's proposal (Annexure E) or submit an alternative CPA proposal.
Financial Requirements
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf (TENDER)
Payment terms:
Contracts below R50 million (incl. VAT): payment within 30 days of receipt of undisputed invoices.
Contracts above R50 million (incl. VAT): payment within 60 days.
Financial evaluation requirements (mandatory for contract award):
Public Interest Score (PIS) and calculations.
Latest approved financial statements (within 18 months of year-end), including balance sheet, income statement, statement of changes in equity, cash flow statement, and notes.
Signed director's/member's report and signed compiler/accounting officer/independent reviewer/audit report as applicable.
ITA 34C Income Tax Assessment for companies not audited (current and previous financial years).
Notes to AFS must break down accounts receivable/payable, interest-bearing liabilities, and director/member loans.
Draft, bi-annual, management accounts and unsigned financial statements not accepted.
If requested financial information not received within 5 working days, financial evaluation is closed.
No bid security or performance guarantee required (not applicable).
Compliance Requirements
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf (TENDER)
Eligibility:
Must not be under any restriction to do business with Eskom or State-Owned Companies.
Must not be on any international sanctions list.
Must not have a conflict of interest.
Must not be restricted by National Treasury or on the Tender Defaulters list.
Must not submit more than one tender (except as part of JV/consortium).
JV/consortium must have agreement stating joint and several liability.
Mandatory for contract award:
CSD registration (CSD number/CSD report).
Tax clearance: certified copy of tax clearance certificate for local tenderers not on CSD or without SARS e-filing PIN; foreign suppliers with no SA footprint only need SBD 1.
Employment Equity compliance proof (for South African designated employers).
B-bbee:
To claim preference points, submit a valid B-BBEE certificate from SANAS accredited agency, or a valid sworn affidavit (EME/QSE), or CIPC-issued certificate for EMEs. For JVs, a certificate in the name of the JV.
Supporting documents may be requested: proof of ownership/shareholding (CIPC), ID copies of shareholders, proof of disability where applicable.
Sworn affidavits must meet specific validity requirements (deponent details, ownership percentages, revenue, financial year end, status level, empowering supplier status, same signing date for deponent and Commissioner of Oaths, Commissioner cannot be employee of the enterprise, no true-copy stamps).
B-BBEE improvement or retention plan must be submitted within 30 days of contract signature.
Level 4 bidders must achieve Level 3 by end of first year; Level 5-8 or non-compliant must improve by one level per year.
Safety (contractual requirement):
Acknowledgement form for Eskom SHE rules signed by CEO and two witnesses.
Health and Safety Plan (incident management, SHE communication, emergency management, substance abuse management).
Baseline risk assessment.
Valid Letter of Good Standing.
SHE policy signed and reviewed.
Quality (contractual requirement):
ISO 9001 certification (valid, by accredited body) OR evidence of QMS in operation (documented information, audit reports, management review records).
Draft Contract Quality Plan specific to scope.
Quality Control Plan / Inspection and Test Plan (QCP/ITP) for similar work.
Skills development: deliver one skill for every R3 million invoiced, selected consecutively from a list (N1-N6 Electrical/Industrial/Mechanical Engineering).
Health & Safety
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
Safety requirements (contractual, assessed before award):
Acknowledgement form for Eskom SHE rules and other requirements, signed by CEO and two witnesses.
Health and Safety Plan covering incident management, SHE communication, emergency management, substance abuse management.
Baseline risk assessment with risk factors and controls.
Valid Letter of Good Standing applicable to the scope of work.
SHE policy signed and with review date.
Refer to Safety folder in tender portal.
Contractual Terms
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
Contract type: NEC3 Supply Contract, including pricing schedule and contract data.
Tender validity: 120 days from closing date and time.
Payment terms: 30 days for contracts below R50 million (incl. VAT); 60 days for contracts above R50 million.
Eskom reserves the right to negotiate with preferred bidders if prices are not market-related.
Main contractors discouraged from subcontracting with subsidiaries; if they do, must declare it.
No performance security required.
Alternative tenders not allowed.
Contract may be awarded to one or multiple suppliers; if two, allocation based on price variance (50/50, 60/40, 70/30).
Section
Source: E3868DXKZNOU_Invitation to Tender (ITT) - Concentric cable_.pdf
Additional evaluation details:
Technical evaluation has two parts: documentation evaluation (Level 1 basic compliance, Level 2 scoring) and factory evaluation.
Level 2 threshold: 90% to proceed to factory and sample verification.
Factory sample verification threshold: 80%.
If a bidder achieves 90% but has 10% outstanding aspects, they must address them as part of possible contract award.
Eskom may place technically compliant products on its product database; products already on the database may not be re-evaluated.
Price scored out of 90 points; specific goals (B-BBEE) scored out of 10 points.
Contract awarded to highest combined score.
If more than one supplier acceptable for a line item, two may be appointed with allocation based on price variance (0%: 50/50, 1-5%: 60/40, 6-10%: 70/30).
DocumentSection 5 - Quality.zipReview complete
Important Dates
Source: Section 5 - Quality.zip (unknown)
Closing date: 07 December 2026 at 08:00 (from tender record).
No other dates (briefings, site visits, clarification deadlines) are stated in the provided document.
Contact Information
Source: Section 5 - Quality.zip (unknown)
Eskom Quality Representative:
Name: Vuyelwa Mayo
Role: Officer Quality Control
Date: 22/10/2026
No email, telephone, or submission address provided in the document.
Submission Guidelines
Source: Section 5 - Quality.zip (unknown)
Returnable documents — all must be completed, signed and submitted with the bid:
Form A (Tender and Contract Quality Requirements for Supplier Quality Management Specification 240-105658000/QM 58 and Quality Requirements for ISO 9001): acknowledges and accepts Eskom's supplier quality requirements.
Valid ISO 9001 certificate from an accredited certification body, with scope covering the product/service.
Documented information for roles, responsibilities and authorities (organisation chart and responsibility matrix).
Documented information for control of externally provided processes, products and services, including criteria for evaluation, selection, monitoring and re-evaluation of external providers.
Latest certification management system audit report not older than 12 months.
Records of management review meetings (minutes, attendance registers).
Draft Contract Quality Plan specific to the scope of work.
Draft/example of an Inspection and Test Plan (ITP) or Quality Control Plan (QCP) on similar or previous work.
All documents must be submitted as per the List of Tender Returnables (240-12248652).
Disqualification risks:
Failure to submit any required returnable document.
Incomplete or unsigned Form A.
Evaluation Criteria
Source: Section 5 - Quality.zip (unknown)
Quality requirements are evaluated as part of the tender. The bidder must meet the following quality criteria:
Valid ISO 9001 certificate from an accredited certification body, with scope covering the product/service.
Certification authority must have recognised international accreditation.
Certificate must be valid at the time of tender.
Documented QMS in operation, including documented information for roles, control of externally provided processes, internal audit reports, management review records, and a draft Contract Quality Plan.
Form A completed and signed.
Failure to meet these may result in disqualification.
Preference point system: Not stated in the provided document.
Technical Specifications
Source: Section 5 - Quality.zip (unknown)
Scope: Manufacture and supply ex-works of estimated quantities of 6mm2 (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu-Natal and Free State Operating Units) on an 'as and when' required basis for a period of two (2) years.
Quality requirements:
The supplier must develop, implement, maintain and improve a Quality Management System (QMS) conforming to ISO 9001.
The supplier must prepare a Contract Quality Plan (CQP) specific to the scope of work, following ISO 10005 guidelines.
The supplier must prepare Quality Control Plans (QCP) / Inspection and Test Plans (ITP) covering all stages of manufacturing, fabrication, assembly and installation.
QCP/ITP must be reviewed and accepted by Eskom before work commences.
Hold points and witness points must be included in the QCP/ITP.
The supplier must manage sub-suppliers' quality, including their QMS, CQPs and QCPs.
Special processes (e.g., welding, NDT) must be performed by qualified personnel.
Records must be controlled and retained as per the contract.
The supplier must provide access to Eskom for inspections and audits.
The supplier must submit a final data book before shipment, if applicable.
Compliance Requirements
Source: Section 5 - Quality.zip (unknown)
Quality management system:
Valid ISO 9001 certificate from an accredited certification body, with scope covering the product/service.
Certification authority must have recognised international accreditation.
Certificate must be valid at the time of tender.
B-BBEE: Not stated in the provided document.
CSD registration: Not stated in the provided document.
Tax compliance: Not stated in the provided document.
CIDB grading: Not applicable (not construction).
Local content: Not stated in the provided document.
DocumentSection 1 - Commercial and Finance.zipReview complete
Description
Source: Section 1 - Commercial and Finance.zip
The tender is for the manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu-Natal and Free State Operating Units), on an 'as and when' required basis for two years. The document provided is largely the Eskom eTendering user manual and standard conditions of tender, not the specific tender specification.
Important Dates
Source: Section 1 - Commercial and Finance.zip (TENDER)
Closing date: 7 December 2026 at 08:00 (SAST).
No briefing or site visit details are stated in the provided document. If a compulsory briefing is stipulated in the Tender Data, attendance is mandatory and failure to attend disqualifies the bid.
Contact Information
Source: Section 1 - Commercial and Finance.zip (TENDER)
No named contacts are provided in the extracted text.
For system problems with Tender Bulletin, eTendering or OpenText, contact the buyer responsible for the published tender.
Source: Section 1 - Commercial and Finance.zip (TENDER)
Submission method: electronic only via the Eskom eTendering system at https://eTendering.eskom.co.za. Paper submissions are not accepted for e-tenders.
Register on the eTendering portal (requires a CSD number). An OTP is sent to the registered cellphone and email.
Upload documents under the correct category (Technical, Commercial, Finance) and finalise the submission before the closing time. The system blocks changes or finalisation after closing.
File size per upload: maximum 50MB; total of all files: maximum 900MB.
Keep the confirmation email with the submission ID for future reference.
Tenders must be submitted in English. Written tenders must be completed in ink, not pencil.
The original tender must be signed by a person duly authorised to bind the bidder.
Returnable forms (all must be completed, signed and submitted by closing time unless stated otherwise):
Acknowledgement Form: confirms receipt of tender documents and states whether the bid is for the whole or part of the scope.
SDL&I Undertaking: to be submitted by contract award; failure to do so means the tender is not considered for award.
Supplier Integrity Pact Integrity Declaration Form: commits the bidder to ethical conduct and no collusion.
Proof of authority to act as agent, if an agent submits on behalf of the principal.
Disqualification risks:
Submission after the closing time, for any reason.
Failure to finalise the electronic submission before closing.
Missing mandatory returnables by closing time.
Misrepresentation or falsification of any information, certificate, affidavit or document.
Subcontracting 100% of the scope of work.
Failure to attend a compulsory site visit or clarification meeting, if one is stipulated.
Evaluation Criteria
Source: Section 1 - Commercial and Finance.zip (TENDER)
Evaluation stages:
Basic compliance: the tender must meet all basic compliance requirements stated in the Invitation to Tender; failure renders the tender non-responsive.
Mandatory returnables: tenders missing mandatory documents or information by closing time are disqualified.
Pre-qualification criteria: if stipulated, bidders must meet these; Eskom will not measure the same criterion twice (no double dipping).
Functionality: if functionality is a criterion, bidders must meet the minimum threshold stated in the Tender Data to proceed.
Financial analysis: Eskom assesses the financial risk of doing business with the bidder; if the risk is too high and no mitigating factors exist, the bidder is not considered for award.
Price evaluation: price is evaluated per the Tender Data, considering factors such as CPA, FOREX, commodity exposure, discounts, technical adjustments, PV and forecasted invoicing rates.
B-BBEE and Specific Goals: scored under the PPPFA 90/10 or 80/20 system. If no B-BBEE certificate/affidavit is provided at closing, the bidder scores zero for B-BBEE but is not disqualified (if otherwise responsive). Specific Goals: failure to meet or provide proof results in zero points for that element, not disqualification.
Ranking: price and Specific Goals scores are added; the highest-ranked bidder is awarded, unless objective criteria under section 2(1)(f) of the PPPFA apply (as stipulated in the Invitation to Tender).
Arithmetical errors: Eskom checks the highest-ranked tenders for errors (decimal misplacement, omissions, incorrect multiplication/addition, incorrect exchange rate). The amount in words prevails over figures. If the bidder does not accept corrections, the tender is rejected.
Reverse e-auction: if used, bidders submit a complete tender without prices; any included prices are ignored.
Technical Specifications
Source: Section 1 - Commercial and Finance.zip (TENDER)
Scope: manufacture and supply ex-works of estimated quantities of 6mm² (tinned copper and coated steel) concentric cable for Distribution, Central East Cluster (KwaZulu-Natal and Free State Operating Units).
Basis: 'as and when' required for a period of two (2) years.
Delivery: ex-works (buyer collects from supplier's premises).
The tender is for the supply of goods; no detailed technical specification (e.g., standards, quantities, delivery locations) is provided in the extracted text.
Financial Requirements
Source: Section 1 - Commercial and Finance.zip (TENDER)
Pricing:
Rates and prices must be in South African Rand unless otherwise instructed.
Prices must be fixed for the contract duration, with no price adjustment except as provided in the Invitation to Tender.
Include all duties, taxes (including VAT) and levies applicable 14 days before closing.
If security for performance is required, the bidder must name at least two financial institutions it intends to approach; Eskom may reject unsuitable institutions.
No specific amounts, bonds, guarantees, retention or payment terms are stated in the extracted text.
Compliance Requirements
Source: Section 1 - Commercial and Finance.zip (TENDER)
CSD registration: mandatory to access the eTendering system and to submit a bid.
B-BBEE: a valid B-BBEE certificate/affidavit or CSD report is required at closing to claim preference points; if not provided, the bidder scores zero for B-BBEE (but is not disqualified). Fraudulent or expired certificates lead to disqualification.
CIDB: if CIDB grading is stipulated as a qualification criterion, the bidder must be registered with the CIDB at closing, or be capable of being registered within 21 working days after closing. Proof of registration is mandatory at closing; if only an application is available, that must be submitted by closing and the actual registration printout by contract award.
SHEQ: proof of safety, health, environmental and quality systems, policies and capabilities must be provided to Eskom's satisfaction at closing and/or contract award. All SHEQ costs and personnel must be reflected in the tender.
Legislation: comply with PPPFA, B-BBEE Act, COIDA, OHS Act, National Treasury instructions, CIDB regulations (for construction), and any other applicable regulations.
No restriction to do business with Eskom or State-Owned Companies.
No 100% subcontracting of the scope of work.
SDL&I Undertaking: must be completed and submitted by contract award.
Designated materials and thresholds: information must be submitted no later than contract award.
Section
Source: Section 1 - Commercial and Finance.zip
Additional evaluation criteria: Eskom will not measure a criterion twice (no double dipping). Functionality, if used, has a minimum threshold stated in the Tender Data. Financial analysis assesses the risk of doing business with the bidder; if the risk is too high and no mitigating factors exist, the bidder is not considered for award. Price evaluation considers factors such as CPA, FOREX, commodity exposure, discounts, technical adjustments, PV and forecasted invoicing rates. B-BBEE and Specific Goals are scored under the PPPFA 90/10 or 80/20 system. Ranking is by total of price and Specific Goals scores. Objective criteria under section 2(1)(f) of the PPPFA may be used if stipulated; functionality and B-BBEE elements cannot be used as objective criteria. Reverse e-auction may be used; if so, prices must not be included in the tender.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
KwaZulu Natal and Free State Operating Units - NEW GERMANY - KZN and FS OU - 3610
Document-Backed
Recently Synced
Source Snapshot Available
AI Enhanced
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
5
Last checked
20 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.