Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Quotation
Delivery Location
1 Apollo road - Olifantsfontein - Olifantsfontein -
Organization Type
GOVERNMENT
Published
18 Nov 2026
OCDS Reference
ocds-9t57fa-178734
The south african bureau of standards requires one voltage breakdown tester for its materials and installations business unit, supplied with delivery, installation, commissioning, training for up to 10 people, a three-year maintenance plan and an ilac-traceable calibration certificate. The unit must deliver ac and dc output up to 100 kv at 10 kva, with programmable ramping, leakage detection and safety interlocks, and must be supported by a brochure, at least three client reference letters and a maintenance plan. Only bidders who meet every mandatory document and technical requirement proceed to the 80/20 preference point evaluation, where price carries 80 points and specific goals 20. Quotations close on 30 november 2026 at 11:00 and must be emailed to the designated procurement specialist; late or incomplete submissions are rejected.
Closing: 30 November 2026 at 11:00, submitted by email to [email protected] — late quotations are not accepted and receipt is the bidder's responsibility.
Mandatory documents: CSD registration report, valid B-BBEE certificate or sworn affidavit, SBD 4, SBD 6.1 and the signed Appendix A Non-Disclosure Agreement — any omission stops the bid before preference points are scored.
Technical proof: brochure and/or data sheet for the offered tester, plus at least three reference letters from previous or current clients confirming successful delivery of a voltage breakdown tester or equivalent.
After-sales: a three-year maintenance plan confirming both online and physical support, with the supplier responsible for delivery, installation, commissioning, training for up to 10 people, and an instruction manual and ILAC-traceable calibration certificate.
Specification floor: AC and DC output 0–100 kV, 10 kVA output power, measurement error ≤2%, leakage current 1–30 mA settable by software, 20 × 4 LCD, RS-232 and PC report generation, zero-start interlock, overcurrent/overvoltage shutdown and emergency stop.
Evaluation: 80/20 system with 80 points for price and 20 for specific goals (up to 10 for black ownership, 6 for black women ownership, 4 for ownership by persons living with disabilities); SABS also weighs ease of operation, flexibility, component quality and design soundness.
Pricing and payment: all-inclusive of VAT with a cost breakdown covering installation, commissioning, training, transport to SABS NETFA and disbursements; no advance payment is made, and the quotation must remain valid for 120 days, extendable by SABS by 60 days without consent.
Conduct: direct all enquiries to Lethabo Nedondwe on 012 428 6044; contacting other SABS personnel or canvassing leads to disqualification, as does failing to disclose all CSD-registered active companies linked to directors.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Date & Time
Monday, 30 November 2026 - 11:00
Venue
null
Categories
Request for Quotation
1 Apollo road - Olifantsfontein - Olifantsfontein -
Recommended Certifications
Having these can improve your winning chances: SABS Product Certification, NRCS Certification
AI Document Analysis Stages
Description
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf18 Nov
2026
Tender Published
Tender was published
30 Nov
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf
Supply and delivery of a voltage breakdown tester for the South African Bureau of Standards' Materials and Installations Business Unit, including installation, commissioning, training for up to 10 people, and a three-year maintenance plan. The tester must apply controlled high voltage to insulating materials to determine breakdown voltage across cables, transformers and oils.
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
SA Bureau of StandardsMatched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubMedian Estimate
R 92 736
Range
Based on 25 comparable awarded tenders. Companies with similar profiles typically bid near the median.
* Estimates are based on historical data and do not guarantee actual award values.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
The South African Bureau of Standards (SABS) invites quotations for the supply and delivery of a voltage breakdown tester for its Materials and Installations Business Unit.
Purpose:
Scope:
Reference standards:
OEM product specification manual should be referenced for technical requirements.
Important Dates
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf (RFQ)Closing date: 30 November 2026 at 11:00
No compulsory briefing or site visit is stated.
Contact Information
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf (RFQ)Enquiries:
Submission:
Service delivery address:
Sabs netfa
1 Dr Lategan Road
Groenkloof
Pretoria, 0001
Submission Guidelines
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf (RFQ)Submission method: email
Submission email: [email protected]
Closing time: 11:00
Returnable documents (all must be submitted with the quotation):
Disqualification risks:
Evaluation Criteria
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf (RFQ)Evaluation stages:
Specific goals points allocation (20 points):
Additional selection criteria (used by SABS to select the most suitable system):
Technical Specifications
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf (RFQ)Supply and delivery of one voltage breakdown tester for the SABS Materials and Installations Business Unit.
Functional requirements:
Technical specifications:
Scope of supply:
Reference standards:
Equipment to operate under room temperature conditions.
Quality Management
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdfQuality requirements:
Pricing Schedule
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdfQuotation must include:
No advance payment will be made; payment only against delivery.
Financial Requirements
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf (RFQ)Pricing:
Payment:
Bid validity:
No bid security, performance bond, guarantee or retention is stated.
Compliance Requirements
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdf (RFQ)Mandatory eligibility:
Mandatory technical requirements:
Disqualification:
Health & Safety
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdfSafety features required on the tester:
Contractual Terms
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdfContract terms:
Section
Source: RFQ 202118 SUPPLY AND DELIVERY OF A VOLTAGE BREAKDOWN TESTER.pdfEvaluation is in two stages:
Specific goals points:
SABS may also consider ease of operation, flexibility, additional features, mechanical soundness, component quality and overall design when selecting the most suitable system.
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
1 Dr Lategan Rd, Groenkloof, Pretoria, 0027, South Africa
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
1
Last checked
18 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Contact
012-428-6157[email protected]www.sabs.co.za1 Dr Lategan Rd, Groenkloof, Pretoria, 0027, South Africa
Key Personnel
Get deep intelligence on Supplies: General. Unlock full pricing strategies, bid frequency, and historical win rates.
Learn how to submit a winning bid with these related articles
Everything South African general contractors need to know about how to write a winning tender proposal without an in-house bid team in gauteng — covering CSD, BBBEE, step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
Your meticulously crafted General sector tender submission can be disqualified for a single, seemingly minor compliance oversight. The reality for South African contractors is that technical competence is no longer sufficient; it is underpinned by a non-negotiable framework of documentary compliance. This regulatory guide: mastering CSD and BBBEE compliance for general sector tenders in south africa provides a comprehensive, step-by-step breakdown of the mandatory registrations and certificates you must secure and present. We detail the precise requirements for CSD, BBBEE, SARS TCS, CIPC, and COIDA, explaining their function within the procurement ecosystem governed by the PFMA and PPPFA. Learn the actionable steps to prepare your business, avoid the most common disqualifying errors, and leverage technology to streamline your compliance process for successful bidding in 2026 and beyond.
For South African General contractors, the path to government procurement is paved with non-negotiable regulatory requirements. The most common barrier to entry is not a lack of capability, but a failure to master the foundational compliance frameworks that govern every bid. This complete regulatory guide to CSD and BBBEE compliance for General sector tender suppliers in South Africa demystifies the process. It provides a meticulous, step-by-step field manual for ensuring your company is fully compliant and audit-ready, enabling you to confidently access the R billions in opportunities across infrastructure maintenance, facilities management, and service delivery within the General sector.
This definitive guide provides General sector contractors with the precise, actionable steps required to achieve and maintain CSD and BBBEE compliance for South African public tenders in 2026. Authored by Dr. Sarah Mokwena, a Legal Compliance Specialist, it meticulously walks through the regulatory framework, mandatory registrations, and the critical documentation needed to avoid disqualification. We dissect the common, costly errors made during submission and provide a clear checklist to ensure your bid is responsive and competitive. Learn how to navigate the Central Supplier Database, validate your BBBEE status, and integrate compliance into your tender preparation process.
💡 Want more tendering tips and strategies?
Explore Our Blog