Supply and delivery of electrical motors and pumps for water and wastewater treatment plants

Closing date and time: 11 September 2026 at 14:00 (compulsory).

No compulsory briefing session or site visit is mentioned in the document.

No clarification deadline is stated.

Closing date: Friday, 11 September 2026 at 14:00. Sealed bids marked TN042-2026 to be placed in the Municipal tender box. Bids will be opened directly thereafter in the Councillor Chambers at the Municipal Offices.

No named SCM or technical contact persons, email addresses, or telephone numbers are provided in the tender document. The submission address is the Municipal tender box at the Municipal Offices, Upington. The Municipal Manager's postal address is Private Bag X6003, Upington 8800.

Submission method: sealed bids clearly marked "TN042-2026: SUPPLY AND DELIVERY OF ELECTRICAL MOTORS AND PUMPS FOR DAWID KRUIPER MUNICIPALITY" must be placed in the Municipal tender box at the Municipal Offices, Upington, before or at 14:00 on 11 September 2026. Bids will be opened immediately thereafter in the Councillor Chambers.

Only the original signed document will be accepted; bids submitted by fax or email will not be considered. The complete bid document must be returned without any alteration, modification, deletion, editing or formatting — incomplete or altered documents will not be evaluated.

Returnable forms (all must be completed, signed and submitted):

• Summary of items and bid price (Section D)
• MBD 1 (Invitation to Bid)
• MBD 4 (Declaration of Interest)
• MBD 6.1 (Preference Points Claim)
• MBD 7.1 (Contract Form – Purchase of Goods)
• MBD 8 (Declaration of Past Supply Chain Management Practices)
• MBD 9 (Certificate of Independent Bid Determination)

Disqualification risks: any returnable form left unsigned or omitted; bid received after closing time; document altered, incomplete, or submitted via fax/email.

Bids will be evaluated in accordance with the applicable Preferential Point Scoring System as set out in the Council's Supply Chain Management Policy (80/20 or 90/10 split per PPPFA). No minimum functionality or technical qualifying score is stated in the document. The lowest or only bid will not necessarily be accepted. The Municipality reserves the right to award ad hoc per line item, as a whole, and/or reduce items based on the available budget.

Scope: Supply and delivery of electrical motors and pumps for municipal water and wastewater treatment plants.

Delivery addresses:

• AHS WTW Upington, Schroder/Steenbok Laan, Middelpos, Upington
• KWWTW Kameelmond, Upington

Quantities: 1 unit per item (36 line items).

Items 1–30: specific motor/pump models with detailed technical parameters (manufacturer, model, power, voltage, current, speed, frame size, protection class, insulation class, gear ratio where applicable). Brands include Amandla, CFW, Xylem/Flygt, Siemens, Motovario, Motoline, Hudaco, AMG Hanzel, FOROS, KSB, Wilo, Milton Roy, C.R.I, Ebara, BAUER, WEG, Actom.

Item 31: High-pressure cleaner (electric) — 3-phase 400V/50Hz, flow 520–900 l/h, working pressure 70–200 bar, max pressure 240 bar, connected load 6.9 kW, weight ≤56 kg, 25 m hose (ID 8, 315 bar), stainless steel lance 600 mm, power nozzle included.

Item 32: High-pressure cleaner (petrol) — flow 900 l/h, working pressure 250 bar, max pressure 300 bar, weight ≤56 kg, 25 m hose (ID 8, 315 bar), cage protective frame, crankshaft pump with ceramic pistons.

Item 33: WEG W22 motor, 0.55 kW, 230/400V, 1415 rpm, frame 80, IP55.

Item 34: Faggiolati FVT50T submersible pump, 5.5 kW, 400V, 10.4 A, 2900 rpm, IPX8, insulation class F.

Item 35: CEM Motoline MS80M4/B34 motor, 0.55 kW, 230/400V, 1390 rpm, frame 80, IP55.

Item 36: SEW-Eurodrive RF77 D26 DT90L4 gear motor, 1.5 kW, 230/400V, 1410 rpm, gear ratio 29:1.

Equivalent products are accepted; upon appointment the bidder must confirm which motors/pumps will be supplied and submit data/specification sheets for verification before order and delivery. Equivalent offers require data sheets to be supplied and approved prior to order issuance.

Goods must conform to standards mentioned in the bidding documents and specifications (GCC clause 4.1). Warranty: 12 months after delivery/acceptance or 18 months after shipment, whichever ends first (GCC clause 15.2).

Upon appointment, bidders must confirm which motors and pumps will be supplied and submit data sheets/specification sheets for verification prior to order and delivery. If equivalent product offered, data sheets must be supplied and verified for approval prior to order issuance.

Prices must be quoted according to the price schedules and specifications. Prices valid for 120 days. Prices firm and inclusive of VAT. Municipality reserves right to award ad hoc per line item, as a whole, and/or reduce items based on available budget. All prices quoted must be VAT and Delivery Cost inclusive.

Pricing format: firm prices quoted per line item on the Summary of Items and Bid Prices schedule (Section D). All prices must be inclusive of VAT and delivery costs.

Price validity: 120 days from closing date.

Payment terms: supplier must furnish an invoice accompanied by a copy of the delivery note; payment within 30 days of invoice submission (GCC clause 16.3). Payment in Rand.

Performance security: successful bidder must furnish performance security of the amount specified in the Special Conditions of Contract within 30 days of contract award notification (GCC clause 7.1). Acceptable forms: bank guarantee/irrevocable letter of credit from a reputable bank, or cashier's/certified cheque (GCC clause 7.3). Security returned within 30 days after completion of all obligations including warranty (GCC clause 7.4).

No advance payment, retention percentage, or liquidated damages rate is specified beyond the penalty clause (prime interest rate per day of delay, GCC clause 22.1).

No minimum financial capacity or turnover threshold is stated.

Mandatory compliance documents:

• Proof of registration on National Treasury's Central Supplier Database (CSD).
• Valid tax compliance status (SARS must certify tax matters are in order before award; GCC clause 32.3).
• Municipal account copy not older than 3 months and not in arrears for more than 90 days on date of award. If not liable for municipal services, a sworn affidavit explaining why and/or a valid lease agreement must be provided.
• Completed and signed returnable forms: Summary of items and bid price, MBD 1, MBD 4, MBD 6.1, MBD 7.1, MBD 8, MBD 9.

No specific B-BBEE level, CIDB grading, CIPC registration, professional body registration, or local content percentage is stipulated in the document. The MBD 6.1 form provides for preference points claim under the applicable PPPFA system.

No contract will be concluded with a bidder whose municipal rates, taxes or service charges are in arrears (GCC clause 32.4).

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

24. Antidumping 24.1 When, after the date of bid, provisional payments are required,

or anti-dumping or countervailing duties are imposed, or the

and amount of a provisional payment or anti-dumping or

countervailing right is increased in respect of any dumped or

countervailing subsidized import, the State is not liable for any amount so

required or imposed, or for the amount of any such increase.

duties and rights When, after the said date, such a provisional payment is no

longer required or any such anti-dumping or countervailing

right is abolished, or where the amount of such provisional

payment or any such right is reduced, any such favourable

difference shall on demand be paid forthwith by the supplier to

the purchaser or the purchaser may deduct such amounts from

moneys (if any) which may otherwise be due to the supplier in

regard to goods or services which he delivered or rendered, or

is to deliver or render in terms of the contract or any other

contract or any other amount which may be due to him.

25. Force 25.1 Notwithstanding the provisions of GCC Clauses 22 and 23, the

supplier shall not be liable for forfeiture of its performance

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

31. Notices 31.1 Every written acceptance of a bid shall be posted to the

supplier concerned by registered or certified mail and any other

notice to him shall be posted by ordinary mail to the address

furnished in his bid or to the address notified later by him in

writing and such posting shall be deemed to be proper service

of such notice.

31.2 The time mentioned in the contract documents for performing

any act after such aforesaid notice has been given, shall be

reckoned from the date of posting of such notice.

32. Taxes and duties 32.1 A foreign supplier shall be entirely responsible for all taxes,

stamp duties, license fees, and other such levies imposed

outside the purchaser’s country.

32.2 A local supplier shall be entirely responsible for all taxes,

duties, license fees, etc., incurred until delivery of the

contracted goods to the purchaser.

32.3 No contract shall be concluded with any bidder whose tax

matters are not in order. Prior to the award of a bid SARS must

have certified that the tax matters of the preferred bidder are in

order.

32.4 No contract shall be concluded with any bidder whose

municipal rates and taxes and municipal services charges are

in arrears.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

33. Transfer of 33.1 The contractor shall not abandon, transfer, cede assign or

contracts sublet a contract or part thereof without the written permission

of the purchaser

34. Amendment of 34.1 No agreement to amend or vary a contract or order or the

contracts conditions, stipulations or provisions thereof shall be valid and

of any force unless such agreement to amend or vary is

entered into in writing and signed by the contracting parties.

1 Amandla Varkie Pump Model: SVA40 4kW 380V 8Amps Sn: 3263 or exactly equivalent

2 CFW 01BFCT0007469 7.5 or exactly equivalent

3 Xylem – Flygt 3127060 4.7kW or exactly equivalent

4 Siemens JKH2203007710660 0.75kW or exactly equivalent

5 Motovario EN60034-1 1.5kW or exactly equivalent

6 Motoline 2113044335 1.5kW or exactly equivalent

7 Motovario W210713798 0.55kW or exactly equivalent

8 Xylem - Flygt 3085.60 -226055 2.4kW or exactly equivalent

9 Hudaco Power trans 100653/1-2 1.5kW or exactly equivalent

10 Hudaco Power trans 1006532-2 1.5kW or exactly equivalent

11 Motoline 22010657 1.5kW or exactly equivalent

12 AMG Hanzel 11016/17295 or exactly equivalent

13 Motoline 275918410 11kW or exactly equivalent

14 FOROS Pump :FV550T(20M) 23B81791598718500031 or exactly equivalent

15 Multi-stage KSB Pump WKLn 65/4 39974481336-25D or exactly equivalent

16 Wilo Pumps M-Typ S13.1-08/EAD1-2-M 650607928 or exactly equivalent

17 Milton Roy Pumps GA45P4T3 201409210133 or exactly equivalent

18 KSB ETA 250-29 99722551817/200 or exactly equivalent

19 KSB Pump (ETANORM 065-050-20 GG1A PO or exactly equivalent

20 KSB Pump (ETA 65-250) 45805-431 or exactly equivalent

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

21 KSB Pump (WKln 65/4) 39974481336-25D or exactly equivalent

22 C.R.I Pump 18124K10115 or exactly equivalent

23 KSB Pump (ETA 50-315) or exactly equivalent

24 Ebara Pump (3D/I 40-160/4.0) or exactly equivalent

25 110 kW, 4P, 380V, IE3, B3, IP55 BAUER Motor or exactly equivalent

26 45 kW,4P, 380v, B3, 225S/M, IP66 W22, IE3, WEG motor IP66 or exactly equivalent

27 37kW, 400V, IE3, IP66, WEG motor or exactly equivalent

28 Actom Motor SV872/32/03 15kW or exactly equivalent

29 Actom Motor SV/128/54/01/UE 75kW High speed 2970 RPM or exactly equivalent

30 Actom Motor LD6263/5 45kW or exactly equivalent

31 High Pressure Cleaner (Washer) electric on frame and wheels;

Supply voltage (Ph/V/Hz): 3 / 400 / 50

Flow rate (l/h):520 - 900

Working pressure (bar/MPa): 70 - 200 / 7 - 20

Max. pressure (bar): 240

Connected load (kW): 6.9

Weight (with accessories) (kg): 56 maximum

Spray gun: Standard

High-pressure hose length: 25 m

High-pressure hose specification: ID 8, 315 bar

Stainless steel spray lance: 600 mm

32 High Pressure Cleaner (Washer) petrol on frame and wheels;

Flow rate (l/h): 900

Working pressure (bar/MPa): 250 / 25

Max. pressure (bar/MPa): 300 / 30

Drive type: Petrol

Weight (with accessories) (kg): 56 maximum

Spray gun: Standard

High-pressure hose length: 25 m

High-pressure hose specification: ID 8, 315 bar

 Model: W22

 Power: 0.55 kW

 Voltage: 230/400 V

 Frequency: 50 Hz

 Speed: 1415 rpm

 Frame Size: 80

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

 Protection: IP55

34 Faggiolati Submersible FVT50T Pump 5,5kW or exactly equivalent

 Manufacturer: Faggiolati (Italy)

 Model: FVT50T

 Power Output (P2): 5.5 kW

 Voltage: 400 V

 Current: 10.4 A

 Speed: 2900 rpm

 Protection: IPX8

 Insulation Class: F

35 CEM Motoline Electric Motor 0,55kW, MS80M4/B34 or exactly equivalent

 Model: MS80M4/B34

 Power: 0.55 kW

 Voltage: 230/400 V

 Frequency: 50 Hz

 Speed: 1390 rpm

 Frame Size: 80

 Protection: IP55

36 SEW-Eurodrive Gear Motor RF77 D26 DT90L4 1,5kW or exactly equivalent

 Type: RF77 D26 DT90L4

 Power: 1.5 kW

 Voltage: 230/400 V

 Speed: 1410 rpm

 Gear Ratio: 29:1

NB: Upon appointment, bidders will be requested to confirm which motors and pumps

will be supplied and data sheets/specification sheets must be submitted for verification

prior to order and delivery. If an equivalent product offer is applicable, data sheets must

be supplied and verified for approval prior to an order being issued.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

(Washer) electric on frame 1

and wheels

(Washer) petrol on frame 1

and wheels, technical

specification/ features:

33 WEG electrical motor W22

0,55kW, 230/400V,1415rpm, 1

Frame size 80, IP55 or

exactly equivalent

16. Payment
17. Prices
18. Variation orders
19. Assignment
20. Subcontracts
21. Delays in the supplier’s performance
22. Penalties
23. Termination for default
24. Anti-dumping and countervailing duties and rights
25. Force Majeure
26. Termination for insolvency
27. Settlement of Disputes
28. Limitation of Liability
29. Governing language
30. Applicable law
31. Notices
32. Taxes and duties
33. Transfer of contracts
34. Amendments of contracts

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

General Conditions of Contract

1. Definitions 1. The following terms shall be interpreted as indicated:

1.1 “Closing time” means the date and hour specified in the bidding

documents for the receipt of bids.

1.2 “Contract” means the written agreement entered into between

the purchaser and the supplier, as recorded in the contract

form signed by the parties, including all attachments and

appendices thereto and all documents incorporated by

reference therein.

1.3 “Contract price” means the price payable to the supplier under

the contract for the full and proper performance of his

contractual obligations.

1.4 “Corrupt practice” means the offering, giving, receiving, or

soliciting of anything of value to influence the action of a public

official in the procurement process or in contract execution.

1.5 "Countervailing duties" are imposed in cases where an

enterprise abroad is subsidized by its government and

encouraged to market its products internationally.

1.6 “Country of origin” means the place where the goods were

mined, grown or produced or from which the services are

supplied. Goods are produced when, through manufacturing,

processing or substantial and major assembly of components,

a commercially recognized new product results that is

substantially different in basic characteristics or in purpose or

utility from its components.

1.7 “Day” means calendar day.

1.8 “Delivery” means delivery in compliance of the conditions of the

contract or order.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

1.9 “Delivery ex stock” means immediate delivery directly from

stock actually on hand.

1.10 “Delivery into consignees store or to his site” means delivered

and unloaded in the specified store or depot or on the specified

site in compliance with the conditions of the contract or order,

the supplier bearing all risks and charges involved until the

goods are so delivered and a valid receipt is obtained.

1.11 "Dumping" occurs when a private enterprise abroad market its

goods on own initiative in the RSA at lower prices than that of

the country of origin and which have the potential to harm the

local industries in the RSA.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

1.12 ”Force majeure” means an event beyond the control of the

supplier and not involving the supplier’s fault or negligence and

not foreseeable. Such events may include, but is not restricted

to, acts of the purchaser in its sovereign capacity, wars or

revolutions, fires, floods, epidemics, quarantine restrictions and

freight embargoes.

1.13 “Fraudulent practice” means a misrepresentation of facts in

order to influence a procurement process or the execution of a

contract to the detriment of any bidder, and includes collusive

practice among bidders (prior to or after bid submission)

designed to establish bid prices at artificial non-competitive

levels and to deprive the bidder of the benefits of free and open

competition.

1.14 “GCC” means the General Conditions of Contract.

1.15 “Goods” means all of the equipment, machinery, and/or other

materials that the supplier is required to supply to the purchaser

under the contract.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

1.16 “Imported content” means that portion of the bidding price

represented by the cost of components, parts or materials

which have been or are still to be imported (whether by the

supplier or his subcontractors) and which costs are inclusive of

the costs abroad, plus freight and other direct importation costs

such as landing costs, dock dues, import duty, sales duty or

other similar tax or duty at the South African place of entry as

well as transportation and handling charges to the factory in the

Republic where the goods covered by the bid will be

manufactured.

1.17 “Local content” means that portion of the bidding price, which

is not included in the imported content provided that local

manufacture does take place.

1.18 “Manufacture” means the production of products in a factory

using labour, materials, components and machinery and

includes other related value-adding activities.

1.19 “Order” means an official written order issued for the supply of

goods or works or the rendering of a service.

1.20 “Project site,” where applicable, means the place indicated in

bidding documents.

1.21 “Purchaser” means the organization purchasing the goods.

1.22 “Republic” means the Republic of South Africa.

1.23 “SCC” means the Special Conditions of Contract.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

GOVERNMENT PROCUREMENT: GENERAL CONDITIONS OF CONTRACTDawid Kruiper:

Republic of South Africa

1.24 “Services” means those functional services ancillary to the

supply of the goods, such as transportation and any other

incidental services, such as installation, commissioning,

provision of technical assistance, training, catering, gardening,

security, maintenance and other such obligations of the

supplier covered under the contract.

1.25 “Supplier” means the successful bidder who is awarded the

contract to maintain and administer the required and specified

service(s) to the State.

1.26 “Tort” means in breach of contract.

1.27 “Turnkey” means a procurement process where one service

provider assumes total responsibility for all aspects of the

project and delivers the full end product / service required by

the contract.

1.28 “Written” or “in writing” means hand-written in ink or any form

of electronic or mechanical writing.

2. Application 2.1 These general conditions are applicable to all bids, contracts

and orders including bids for functional and professional

services (excluding professional services related to the

building and construction industry), sales, hiring, letting and the

granting or acquiring of rights, but excluding immovable

property, unless otherwise indicated in the bidding documents.

2.2 Where applicable, special conditions of contract are also laid

down to cover specific goods, services or works.

2.3 Where such special conditions of contract are in conflict with

these general conditions, the special conditions shall apply.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

3. General 3.1 Unless otherwise indicated in the bidding documents, the

purchaser shall not be liable for any expense incurred in the

preparation and submission of a bid. Where applicable a non-

refundable fee for documents may be charged.

3.2 Invitations to bid are usually published in locally distributed

news media and on Dawid Kruiper municipality's website.

4. Standards 4.1 The goods supplied shall conform to the standards mentioned

in the bidding documents and specifications.

5.1 The supplier shall not, without the purchaser’s prior written

5. Use of contract consent, disclose the contract, or any provision thereof, or any

documents and specification, plan, drawing, pattern, sample, or information

information furnished by or on behalf of the purchaser in connection

inspection therewith, to any person other than a person employed by the

supplier in the performance of the contract. Disclosure to any

such employed person shall be made in confidence and shall

extend only so far as may be necessary for purposes of such

performance.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

5.2 The supplier shall not, without the purchaser’s prior written

consent, make use of any document or information mentioned

in GCC clause 5.1 except for purposes of performing the

contract.

5.3 Any document, other than the contract itself mentioned in GCC

clause 5.1 shall remain the property of the purchaser and shall

be returned (all copies) to the purchaser on completion of the

supplier’s performance under the contract if so required by the

purchaser.

5.4 The supplier shall permit the purchaser to inspect the supplier’s

records relating to the performance of the supplier and to have

them audited by auditors appointed by the purchaser, if so

required by the purchaser.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

6. Patent Rights 6.1 The supplier shall indemnify the purchaser against all third-

party claims of infringement of patent, trademark, or industrial

design rights arising from use of the goods or any part thereof

by the purchaser.

6.2 When a supplier developed documentation / projects for Dawid

Kruiper municipality, the intellectual, copy and patent rights or

ownership of such documents or projects will vest in Dawid

Kruiper municipality.

7. Performance 7.1 Within thirty (30) days of receipt of the notification of contract

award, the successful bidder shall furnish to the purchaser the

security performance security of the amount specified in SCC.

7.2 The proceeds of the performance security shall be payable to

the purchaser as compensation for any loss resulting from the

supplier’s failure to complete his obligations under the contract.

7.3 The performance security shall be denominated in the

currency of the contract, or in a freely convertible currency

acceptable to the purchaser and shall be in one of the following

forms:

(a) a bank guarantee or an irrevocable letter of credit

issued by a reputable bank located in the purchaser’s

country or abroad, acceptable to the purchaser, in the

form provided in the bidding documents or another

form acceptable to the purchaser; or

(b) a cashier’s or certified cheque.

7.4 The performance security will be discharged by the purchaser

and returned to the supplier not later than thirty (30) days

following the date of completion of the supplier’s performance

obligations under the contract, including any warranty

obligations, unless otherwise specified.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

8. Inspections, 8.1 All pre-bidding testing will be for the account of the bidder.

tests and

analyses 8.2 If it is a bid condition that goods to be produced or services to

be rendered should at any stage be subject to inspections,

tests and analyses, the bidder or contractor’s premises shall

be open, at all reasonable hours, for inspection by a

representative of the purchaser or organization acting on

behalf of the purchaser.

8.3 If there are no inspection requirements indicated in the bidding

documents and no mention is made in the contract, but during

the contract period it is decided that inspections shall be

carried out, the purchaser shall itself make the necessary

arrangements, including payment arrangements with the

testing authority concerned.

8.4 If the inspections, tests and analyses referred to in clauses 8.2

and 8.3 show the goods to be in accordance with the contract

requirements, the cost of the inspections, tests and analyses

shall be defrayed by the purchaser.

8.5 Where the goods or services referred to in clauses 8.2 and 8.3

do not comply with the contract requirements, irrespective of

whether such goods or services are accepted or not, the cost

in connection with these inspections, tests or analyses shall be

defrayed by the supplier.

8.6 Goods and services which are referred to in clauses 8.2 and

8.3 and which do not comply with the contract requirements

may be rejected.

8.7 Any contract goods may on or after delivery be inspected,

tested or analysed and may be rejected if found not to comply

with the requirements of the contract. Such rejected goods

shall be held at the cost and risk of the supplier who shall, when

called upon, remove them immediately at his own cost and

forthwith substitute them with goods, which do comply with the

requirements of the contract. Failing such removal the rejected

goods shall be returned at the suppliers cost and risk. Should

the supplier fail to provide the substitute goods forthwith, the

purchaser may, without giving the supplier further opportunity

to substitute the rejected goods, purchase such goods as may

be necessary at the expense of the supplier.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

8.8 The provisions of clauses 8.4 to 8.7 shall not prejudice the right

of the purchaser to cancel the contract on account of a breach

of the conditions thereof, or to act in terms of Clause 22 of

Gcc.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

9. Packing 9.1 The supplier shall provide such packing of the goods as is

required to prevent their damage or deterioration during transit

to their final destination, as indicated in the contract. The

packing shall be sufficient to withstand, without limitation,

rough handling during transit and exposure to extreme

temperatures, salt and precipitation during transit, and open

storage. Packing, case size weights shall take into

consideration, where appropriate, the remoteness of the

goods’ final destination and the absence of heavy handling

facilities at all points in transit.

9.2 The packing, marking, and documentation within and outside

the packages shall comply strictly with such special

requirements as shall be expressly provided for in the contract,

including additional requirements, if any, and in any

subsequent instructions ordered by the purchaser.

10. Delivery and 10.1 Delivery of the goods and arrangements for shipping and

clearance obligations, shall be made by the supplier in

Documents accordance with the terms specified in the contract.

11. Insurance 11.1 The goods supplied under the contract shall be fully insured in

a freely convertible currency against loss or damage incidental

to manufacture or acquisition, transportation, storage and

delivery in the manner specified.

12. Transportation 12.1 Should a price other than an all-inclusive delivered price be

required, this shall be specified

13. Incidental 13.1 The supplier may be required to provide any or all of the

following services, including additional services, if any:

Services

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

(a) performance or supervision of on-site assembly and/or

commissioning of the supplied goods;

(b) furnishing of tools required for assembly and/or

maintenance of the supplied goods;

(c) furnishing of a detailed operations and maintenance

manual for each appropriate unit of the supplied goods;

(d) performance or supervision or maintenance and/or

repair of the supplied goods, for a period of time

agreed by the parties, provided that this service shall

not relieve the supplier of any warranty obligations

under this contract; and

(e) training of the purchaser’s personnel, at the supplier’s

plant and/or on-site, in assembly, start-up, operation,

maintenance, and/or repair of the supplied goods.

13.2 Prices charged by the supplier for incidental services, if not

included in the contract price for the goods, shall be agreed

upon in advance by the parties and shall not exceed the

prevailing rates charged to other parties by the supplier for

similar services

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

14. Spare parts 14.1 As specified, the supplier may be required to provide any or all

of the following materials, notifications, and information

pertaining to spare parts manufactured or distributed by the

supplier:

(a) such spare parts as the purchaser may elect to

purchase from the supplier, provided that this election

shall not relieve the supplier of any warranty obligations

under the contract; and;

(b) in the event of termination of production of the spare

parts:

(i) advance notification to the purchaser of the

pending termination, in sufficient time to permit

the purchaser to procure needed requirements;

and

(ii) following such termination, furnishing at no cost

to the purchaser, the blueprints, drawings, and

specifications of the spare parts, if requested

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

15. Warranty 15.1 The supplier warrants that the goods supplied under the

contract are new, unused, of the most recent or current models,

and that they incorporate all recent improvements in design

and materials unless provided otherwise in the contract. The

supplier further warrants that all goods supplied under this

contract shall have no defect, arising from design, materials, or

workmanship (except when the design and/or material is

required by the purchaser’s specifications) or from any act or

omission of the supplier, that may develop under normal use of

the supplied goods in the conditions prevailing in the country of

final destination.

15.2 This warranty shall remain valid for twelve (12) months after

the goods, or any portion thereof as the case may be, have

been delivered to and accepted at the final destination

indicated in the contract, or for eighteen (18) months after the

date of shipment from the port or place of loading in the source

country, whichever period concludes earlier, unless specified

otherwise.

15.3 The purchaser shall promptly notify the supplier in writing of

any claims arising under this warranty.

15.4 Upon receipt of such notice, the supplier shall, within the period

specified and with all reasonable speed, repair or replace the

defective goods or parts thereof, without costs to the

purchaser.

15.5 If the supplier, having been notified, fails to remedy the

defect(s) within the period specified, the purchaser may

proceed to take such remedial action as may be necessary, at

the supplier’s risk and expense and without prejudice to any

other rights which the purchaser may have against the supplier

under the contract.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

Government procurement: general conditions of contrac

Dawid Kruiper: Republic of South Africa

16. Payment 16.1 The method and conditions of payment to be made to the

supplier under this contract shall be specified.

16.2 The supplier shall furnish the purchaser with an invoice

accompanied by a copy of the delivery note and upon

fulfillment of other obligations stipulated in the contract.

16.3 Payments shall be made promptly by the purchaser, but in no

case later than thirty (30) days after submission of an invoice

or claim by the supplier.

16.4 Payment will be made in Rand unless otherwise stipulated.

17. Prices 17.1 Prices charged by the supplier for goods delivered and

services performed under the contract shall not vary from the

prices quoted by the supplier in his bid, with the exception of

any price adjustments authorized or in the purchaser’s request

for bid validity extension, as the case may be.

18. Variation 18.1 In cases where the estimated value of the envisaged changes

in purchase does not vary more than 15% of the total value of

Orders the original contract, the contractor may be instructed to deliver

the goods or render the services as such. In cases of

measurable quantities, the contractor may be approached to

reduce the unit price, and such offers may be accepted

provided that there is no escalation in price.

19. Assignment 19.1 The supplier shall not assign, in whole or in part, its obligations

to perform under the contract, except with the purchaser’s prior

written consent.

20. Subcontracts 20.1 The supplier shall notify the purchaser in writing of all

subcontracts awarded under this contracts if not already

specified in the bid. Such notification, in the original bid or later,

shall not relieve the supplier from any liability or obligation

under the contract.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

21. Delays in the 21.1 Delivery of the goods and performance of services shall be

made by the supplier in accordance with the time schedule

supplier’s prescribed by the purchaser in the contract.

performance

21.2 If at any time during performance of the contract, the supplier

or its subcontractor(s) should encounter conditions impeding

timely delivery of the goods and performance of services, the

supplier shall promptly notify the purchaser in writing of the fact

of the delay, its likely duration and its cause(s). As soon as

practicable after receipt of the supplier’s notice, the purchaser

shall evaluate the situation and may at his discretion extend

the supplier’s time for performance, with or without the

imposition of penalties, in which case the extension shall be

ratified by the parties by amendment of contract.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

21.3 The right is reserved to procure outside of the contract small

quantities or to have minor essential services executed if an

emergency arises, the supplier’s point of supply is not situated

at or near the place where the goods are required, or the

supplier’s services are not readily available.

21.4 Except as provided under GCC Clause 25, a delay by the

supplier in the performance of its delivery obligations shall

render the supplier liable to the imposition of penalties,

pursuant to GCC Clause 22, unless an extension of time is

agreed upon pursuant to GCC Clause 22.2 without the

application of penalties.

21.5 Upon any delay beyond the delivery period in the case of a

goods contract, the purchaser shall, without cancelling the

contract, be entitled to purchase goods of a similar quality and

up to the same quantity in substitution of the goods not

supplied in conformity with the contract and to return any goods

delivered later at the supplier’s expense and risk, or to cancel

the contract and buy such goods as may be required to

complete the contract and without prejudice to his other rights,

be entitled to claim damages from the supplier.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

22. Penalties 22.1 Subject to GCC Clause 25, if the supplier fails to deliver any or

all of the goods or to perform the services within the period(s)

specified in the contract, the purchaser shall, without prejudice

to its other remedies under the contract, deduct from the

contract price, as a penalty, a sum calculated on the delivered

price of the delayed goods or unperformed services using the

current prime interest rate calculated for each day of the delay

until actual delivery or performance. The purchaser may also

consider termination of the contract pursuant to GCC Clause

24. Termination 23.1 The purchaser, without prejudice to any other remedy for

breach of contract, by written notice of default sent to the

for default supplier, may terminate this contract in whole or in part:

(a) if the supplier fails to deliver any or all of the goods

within the period(s) specified in the contract, or within

any extension thereof granted by the purchaser

pursuant to GCC Clause 21.2;

(b) if the supplier fails to perform any other obligation(s)

under the contract; or

(c) if the supplier, in the judgment of the purchaser, has

engaged in corrupt or fraudulent practices in

competing for or in executing the contract.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

23.2 In the event the purchaser terminates the contract in whole or

in part, the purchaser may procure, upon such terms and in

such manner, as it deems appropriate, goods, works or

services similar to those undelivered, and the supplier shall be

liable to the purchaser for any excess costs for such similar

goods, works or services. However, the supplier shall continue

performance of the contract to the extent not terminated.

23.3 Where the purchaser terminates the contract in whole or in part,

the purchaser may decide to impose a restriction penalty on the

supplier by prohibiting such supplier from doing business with

the public sector for a period not exceeding 10 years.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

23.4 If a purchaser intends imposing a restriction on a supplier or

any person associated with the supplier, the supplier will be

allowed a time period of not more than fourteen (14) days to

provide reasons why the envisaged restriction should not be

imposed. Should the supplier fail to respond within the

stipulated fourteen (14) days the purchaser may regard the

supplier as having no objection and proceed with the

restriction.

23.5. Any restriction imposed on any person by the purchaser will, at

the discretion of the purchaser, also be applicable to any other

enterprise or any partner, manager, director or other person

who wholly or partly exercises or exercised or may exercise

control over the enterprise of the first-mentioned person, and

with which enterprise or person the first-mentioned person, is

or was in the opinion of the purchaser actively associated.

23.6 If a restriction is imposed, the purchaser must, within five (5)

working days of such imposition, furnish the National Treasury,

with the following information:

(i) the name and address of the supplier and / or person.

restricted by the purchaser;

(ii) the date of commencement of the restriction

(iii) the period of restriction; and

(iv) the reasons for the restriction.

These details will be loaded in the National Treasury’s central

database of suppliers or persons prohibited from doing

business with the public sector.

23.7. If a court of law convicts a person of an offence as

contemplated in sections 12 or 13 of the Prevention and

Combating of Corrupt Activities Act, No. , the court

may also rule that such person’s name be endorsed on the

Register for Tender Daulters. When a person’s name has been

endorsed on the Register, the person will be prohibited from

doing business with the public sector for a period not less than

five years and not more than 10 years. The National Treasury

is empowered to determine the period of restriction and each

case will be dealt with on its own merits. According to section

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

32 of the Act the Register must be open to the public. The

Register can be perused on the National Treasury website

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

24. Antidumping 24.1 When, after the date of bid, provisional payments are required,

or anti-dumping or countervailing duties are imposed, or the

and amount of a provisional payment or anti-dumping or

countervailing right is increased in respect of any dumped or

countervailing subsidized import, the State is not liable for any amount so

required or imposed, or for the amount of any such increase.

duties and rights When, after the said date, such a provisional payment is no

longer required or any such anti-dumping or countervailing

right is abolished, or where the amount of such provisional

payment or any such right is reduced, any such favourable

difference shall on demand be paid forthwith by the supplier to

the purchaser or the purchaser may deduct such amounts from

moneys (if any) which may otherwise be due to the supplier in

regard to goods or services which he delivered or rendered, or

is to deliver or render in terms of the contract or any other

contract or any other amount which may be due to him.

25. Force 25.1 Notwithstanding the provisions of GCC Clauses 22 and 23, the

supplier shall not be liable for forfeiture of its performance

Majeure security, damages, or termination for default if and to the extent

that his delay in performance or other failure to perform his

obligations under the contract is the result of an event of force

majeure.

25.2 If a force majeure situation arises, the supplier shall promptly

notify the purchaser in writing of such condition and the cause

thereof. Unless otherwise directed by the purchaser in writing,

the supplier shall continue to perform its obligations under the

contract as far as is reasonably practical, and shall seek all

reasonable alternative means for performance not prevented

by the force majeure event.

26. Termination 26.1 The purchaser may at any time terminate the contract by giving

written notice to the supplier if the supplier becomes bankrupt

for insolvency or otherwise insolvent. In this event, termination will be without

compensation to the supplier, provided that such termination

will not prejudice or affect any right of action or remedy, which

has accrued or will accrue thereafter to the purchaser.

27. Settlement of 27.1 If any dispute or difference of any kind whatsoever arises

between the purchaser and the supplier in connection with or

Disputes arising out of the contract, the parties shall make every effort

to resolve amicably such dispute or difference by mutual

consultation.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

27.2 If, after thirty (30) days, the parties have failed to resolve their

dispute or difference by such mutual consultation, then either

the purchaser or the supplier may give notice to the other

party of his intention to commence with mediation. No

mediation in respect of this matter may be commenced

unless such notice is given to the other party.

27.3 Should it not be possible to settle a dispute by means of

mediation, it may be settled in a South African court of law.

27.4 Notwithstanding any reference to mediation and/or court

proceedings herein,

(a) the parties shall continue to perform their respective

obligations under the contract unless they otherwise

agree; and

(b) the purchaser shall pay the supplier any monies due

the supplier for goods delivered and / or services

rendered according to the prescripts of the contract.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

28. Limitation of 28.1 Except in cases of criminal negligence or willful misconduct,

and in the case of infringement pursuant to Clause 6;

Liability

(a) the supplier shall not be liable to the purchaser,

whether in contract, tort, or otherwise, for any indirect

or consequential loss or damage, loss of use, loss of

production, or loss of profits or interest costs, provided

that this exclusion shall not apply to any obligation of

the supplier to pay penalties and/or damages to the

purchaser; and

(b) the aggregate liability of the supplier to the purchaser,

whether under the contract, in tort or otherwise, shall

not exceed the total contract price, provided that this

limitation shall not apply to the cost of repairing or

replacing defective equipment.

29. Governing 29.1 The contract shall be written in English. All correspondence

and other documents pertaining to the contract that is

Language exchanged by the parties shall also be written in English.

30. Applicable law 30.1 The contract shall be interpreted in accordance with South

African laws, unless otherwise specified.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

31. Notices 31.1 Every written acceptance of a bid shall be posted to the

supplier concerned by registered or certified mail and any other

notice to him shall be posted by ordinary mail to the address

furnished in his bid or to the address notified later by him in

writing and such posting shall be deemed to be proper service

of such notice.

31.2 The time mentioned in the contract documents for performing

any act after such aforesaid notice has been given, shall be

reckoned from the date of posting of such notice.

32. Taxes and duties 32.1 A foreign supplier shall be entirely responsible for all taxes,

stamp duties, license fees, and other such levies imposed

outside the purchaser’s country.

32.2 A local supplier shall be entirely responsible for all taxes,

duties, license fees, etc., incurred until delivery of the

contracted goods to the purchaser.

32.3 No contract shall be concluded with any bidder whose tax

matters are not in order. Prior to the award of a bid SARS must

have certified that the tax matters of the preferred bidder are in

order.

32.4 No contract shall be concluded with any bidder whose

municipal rates and taxes and municipal services charges are

in arrears.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

33. Transfer of 33.1 The contractor shall not abandon, transfer, cede assign or

contracts sublet a contract or part thereof without the written permission

of the purchaser

34. Amendment of 34.1 No agreement to amend or vary a contract or order or the

contracts conditions, stipulations or provisions thereof shall be valid and

of any force unless such agreement to amend or vary is

entered into in writing and signed by the contracting parties.

Any waiver of the requirement that the agreement to amend or

vary shall be in writing, shall also be in writing.

35. Prohibition of 35.1 In terms of section 4 (1) (b) (iii) of the Competition Act No. 89

restrictive practices of 1998, as amended, an agreement between, or concerted

practice by, firms, or a decision by an association of firms, is

prohibited if it is between parties in a horizontal relationship

and if a bidder(s) is / are or a contractor(s) was / were involved

in collusive bidding.

35.2 If a bidder(s) or contractor(s) based on reasonable grounds or

evidence obtained by the purchaser has / have engaged in the

restrictive practice referred to above, the purchaser may refer

the matter to the Competition Commission for investigation and

possible imposition of administrative penalties as

contemplated in section 59 of the Competition Act No 89 0f

35.3 If a bidder(s) or contractor(s) has / have been found guilty by

the Competition Commission of the restrictive practice referred

to above, the purchaser may, in addition and without prejudice

to any other remedy provided for, invalidate the bid(s) for such

item(s) offered, and / or terminate the contract in whole or part,

and / or restrict the bidder(s) or contractor(s) from conducting

business with the public sector for a period not exceeding ten

(10) years and / or claim damages from the bidder(s) or

contractor(s) concerned.

Government procurement: general conditions of contract

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

Dawid kruiper municipality

1. Definitions 1. The following terms shall be interpreted as indicated:

1.1 “Closing time” means the date and hour specified in the bidding

documents for the receipt of bids.

1.2 “Contract” means the written agreement entered into between

the purchaser and the supplier, as recorded in the contract

form signed by the parties, including all attachments and

appendices thereto and all documents incorporated by

reference therein.

1.3 “Contract price” means the price payable to the supplier under

the contract for the full and proper performance of his

contractual obligations.

1.4 “Corrupt practice” means the offering, giving, receiving, or

soliciting of anything of value to influence the action of a public

official in the procurement process or in contract execution.

1.5 "Countervailing duties" are imposed in cases where an

enterprise abroad is subsidized by its government and

encouraged to market its products internationally.

1.6 “Country of origin” means the place where the goods were

mined, grown or produced or from which the services are

supplied. Goods are produced when, through manufacturing,

processing or substantial and major assembly of components,

a commercially recognized new product results that is

substantially different in basic characteristics or in purpose or

utility from its components.

1.7 “Day” means calendar day.

1.8 “Delivery” means delivery in compliance of the conditions of the

contract or order.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

1.9 “Delivery ex stock” means immediate delivery directly from

stock actually on hand.

1.10 “Delivery into consignees store or to his site” means delivered

and unloaded in the specified store or depot or on the specified

site in compliance with the conditions of the contract or order,

the supplier bearing all risks and charges involved until the

goods are so delivered and a valid receipt is obtained.

1.11 "Dumping" occurs when a private enterprise abroad market its

goods on own initiative in the RSA at lower prices than that of

the country of origin and which have the potential to harm the

local industries in the RSA.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

1.12 ”Force majeure” means an event beyond the control of the

supplier and not involving the supplier’s fault or negligence and

not foreseeable. Such events may include, but is not restricted

to, acts of the purchaser in its sovereign capacity, wars or

revolutions, fires, floods, epidemics, quarantine restrictions and

freight embargoes.

1.13 “Fraudulent practice” means a misrepresentation of facts in

order to influence a procurement process or the execution of a

contract to the detriment of any bidder, and includes collusive

practice among bidders (prior to or after bid submission)

designed to establish bid prices at artificial non-competitive

levels and to deprive the bidder of the benefits of free and open

competition.

1.14 “GCC” means the General Conditions of Contract.

1.15 “Goods” means all of the equipment, machinery, and/or other

materials that the supplier is required to supply to the purchaser

under the contract.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

1.16 “Imported content” means that portion of the bidding price

represented by the cost of components, parts or materials

which have been or are still to be imported (whether by the

supplier or his subcontractors) and which costs are inclusive of

the costs abroad, plus freight and other direct importation costs

such as landing costs, dock dues, import duty, sales duty or

other similar tax or duty at the South African place of entry as

well as transportation and handling charges to the factory in the

1.24 “Services” means those functional services ancillary to the

supply of the goods, such as transportation and any other

incidental services, such as installation, commissioning,

provision of technical assistance, training, catering, gardening,

security, maintenance and other such obligations of the

supplier covered under the contract.

1.25 “Supplier” means the successful bidder who is awarded the

contract to maintain and administer the required and specified

service(s) to the State.

1.26 “Tort” means in breach of contract.

1.27 “Turnkey” means a procurement process where one service

provider assumes total responsibility for all aspects of the

project and delivers the full end product / service required by

the contract.

1.28 “Written” or “in writing” means hand-written in ink or any form

of electronic or mechanical writing.

2. Application 2.1 These general conditions are applicable to all bids, contracts

and orders including bids for functional and professional

services (excluding professional services related to the

building and construction industry), sales, hiring, letting and the

granting or acquiring of rights, but excluding immovable

property, unless otherwise indicated in the bidding documents.

2.2 Where applicable, special conditions of contract are also laid

down to cover specific goods, services or works.

2.3 Where such special conditions of contract are in conflict with

these general conditions, the special conditions shall apply.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

3. General 3.1 Unless otherwise indicated in the bidding documents, the

purchaser shall not be liable for any expense incurred in the

preparation and submission of a bid. Where applicable a non-

refundable fee for documents may be charged.

3.2 Invitations to bid are usually published in locally distributed

news media and on Dawid Kruiper municipality's website.

4. Standards 4.1 The goods supplied shall conform to the standards mentioned

in the bidding documents and specifications.

5.1 The supplier shall not, without the purchaser’s prior written

documents and specification, plan, drawing, pattern, sample, or information

information furnished by or on behalf of the purchaser in connection

inspection therewith, to any person other than a person employed by the

supplier in the performance of the contract. Disclosure to any

such employed person shall be made in confidence and shall

extend only so far as may be necessary for purposes of such

performance.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

5.2 The supplier shall not, without the purchaser’s prior written

consent, make use of any document or information mentioned

in GCC clause 5.1 except for purposes of performing the

contract.

5.3 Any document, other than the contract itself mentioned in GCC

clause 5.1 shall remain the property of the purchaser and shall

be returned (all copies) to the purchaser on completion of the

supplier’s performance under the contract if so required by the

purchaser.

5.4 The supplier shall permit the purchaser to inspect the supplier’s

records relating to the performance of the supplier and to have

them audited by auditors appointed by the purchaser, if so

required by the purchaser.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

6. Patent Rights 6.1 The supplier shall indemnify the purchaser against all third-

party claims of infringement of patent, trademark, or industrial

design rights arising from use of the goods or any part thereof

by the purchaser.

6.2 When a supplier developed documentation / projects for Dawid

7. Performance 7.1 Within thirty (30) days of receipt of the notification of contract

award, the successful bidder shall furnish to the purchaser the

security performance security of the amount specified in SCC.

7.2 The proceeds of the performance security shall be payable to

the purchaser as compensation for any loss resulting from the

supplier’s failure to complete his obligations under the contract.

7.3 The performance security shall be denominated in the

currency of the contract, or in a freely convertible currency

acceptable to the purchaser and shall be in one of the following

forms:

(a) a bank guarantee or an irrevocable letter of credit

issued by a reputable bank located in the purchaser’s

country or abroad, acceptable to the purchaser, in the

form provided in the bidding documents or another

form acceptable to the purchaser; or

(b) a cashier’s or certified cheque.

7.4 The performance security will be discharged by the purchaser

and returned to the supplier not later than thirty (30) days

following the date of completion of the supplier’s performance

obligations under the contract, including any warranty

obligations, unless otherwise specified.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

8. Inspections, 8.1 All pre-bidding testing will be for the account of the bidder.

tests and

analyses 8.2 If it is a bid condition that goods to be produced or services to

be rendered should at any stage be subject to inspections,

tests and analyses, the bidder or contractor’s premises shall

be open, at all reasonable hours, for inspection by a

representative of the purchaser or organization acting on

behalf of the purchaser.

8.3 If there are no inspection requirements indicated in the bidding

documents and no mention is made in the contract, but during

the contract period it is decided that inspections shall be

carried out, the purchaser shall itself make the necessary

arrangements, including payment arrangements with the

testing authority concerned.

8.4 If the inspections, tests and analyses referred to in clauses 8.2

and 8.3 show the goods to be in accordance with the contract

requirements, the cost of the inspections, tests and analyses

shall be defrayed by the purchaser.

8.5 Where the goods or services referred to in clauses 8.2 and 8.3

do not comply with the contract requirements, irrespective of

whether such goods or services are accepted or not, the cost

in connection with these inspections, tests or analyses shall be

defrayed by the supplier.

8.6 Goods and services which are referred to in clauses 8.2 and

8.3 and which do not comply with the contract requirements

may be rejected.

8.7 Any contract goods may on or after delivery be inspected,

tested or analysed and may be rejected if found not to comply

with the requirements of the contract. Such rejected goods

shall be held at the cost and risk of the supplier who shall, when

called upon, remove them immediately at his own cost and

forthwith substitute them with goods, which do comply with the

requirements of the contract. Failing such removal the rejected

goods shall be returned at the suppliers cost and risk. Should

the supplier fail to provide the substitute goods forthwith, the

purchaser may, without giving the supplier further opportunity

to substitute the rejected goods, purchase such goods as may

be necessary at the expense of the supplier.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

8.8 The provisions of clauses 8.4 to 8.7 shall not prejudice the right

of the purchaser to cancel the contract on account of a breach

of the conditions thereof, or to act in terms of Clause 22 of

11. Insurance 11.1 The goods supplied under the contract shall be fully insured in

a freely convertible currency against loss or damage incidental

to manufacture or acquisition, transportation, storage and

delivery in the manner specified.

12. Transportation 12.1 Should a price other than an all-inclusive delivered price be

required, this shall be specified

13. Incidental 13.1 The supplier may be required to provide any or all of the

following services, including additional services, if any:

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

(a) performance or supervision of on-site assembly and/or

commissioning of the supplied goods;

(b) furnishing of tools required for assembly and/or

maintenance of the supplied goods;

(c) furnishing of a detailed operations and maintenance

manual for each appropriate unit of the supplied goods;

(d) performance or supervision or maintenance and/or

repair of the supplied goods, for a period of time

agreed by the parties, provided that this service shall

not relieve the supplier of any warranty obligations

under this contract; and

(e) training of the purchaser’s personnel, at the supplier’s

plant and/or on-site, in assembly, start-up, operation,

maintenance, and/or repair of the supplied goods.

13.2 Prices charged by the supplier for incidental services, if not

included in the contract price for the goods, shall be agreed

upon in advance by the parties and shall not exceed the

prevailing rates charged to other parties by the supplier for

similar services

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

14. Spare parts 14.1 As specified, the supplier may be required to provide any or all

of the following materials, notifications, and information

pertaining to spare parts manufactured or distributed by the

supplier:

(a) such spare parts as the purchaser may elect to

purchase from the supplier, provided that this election

shall not relieve the supplier of any warranty obligations

under the contract; and;

(b) in the event of termination of production of the spare

parts:

(i) advance notification to the purchaser of the

pending termination, in sufficient time to permit

the purchaser to procure needed requirements;

and

(ii) following such termination, furnishing at no cost

to the purchaser, the blueprints, drawings, and

specifications of the spare parts, if requested

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

15. Warranty 15.1 The supplier warrants that the goods supplied under the

contract are new, unused, of the most recent or current models,

and that they incorporate all recent improvements in design

and materials unless provided otherwise in the contract. The

supplier further warrants that all goods supplied under this

contract shall have no defect, arising from design, materials, or

workmanship (except when the design and/or material is

required by the purchaser’s specifications) or from any act or

omission of the supplier, that may develop under normal use of

the supplied goods in the conditions prevailing in the country of

final destination.

15.2 This warranty shall remain valid for twelve (12) months after

the goods, or any portion thereof as the case may be, have

been delivered to and accepted at the final destination

indicated in the contract, or for eighteen (18) months after the

date of shipment from the port or place of loading in the source

country, whichever period concludes earlier, unless specified

otherwise.

15.3 The purchaser shall promptly notify the supplier in writing of

any claims arising under this warranty.

15.4 Upon receipt of such notice, the supplier shall, within the period

specified and with all reasonable speed, repair or replace the

defective goods or parts thereof, without costs to the

purchaser.

15.5 If the supplier, having been notified, fails to remedy the

defect(s) within the period specified, the purchaser may

proceed to take such remedial action as may be necessary, at

the supplier’s risk and expense and without prejudice to any

other rights which the purchaser may have against the supplier

under the contract.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

Government procurement: general conditions of contrac

Dawid Kruiper: Republic of South Africa

16. Payment 16.1 The method and conditions of payment to be made to the

supplier under this contract shall be specified.

16.2 The supplier shall furnish the purchaser with an invoice

accompanied by a copy of the delivery note and upon

fulfillment of other obligations stipulated in the contract.

16.3 Payments shall be made promptly by the purchaser, but in no

case later than thirty (30) days after submission of an invoice

or claim by the supplier.

16.4 Payment will be made in Rand unless otherwise stipulated.

17. Prices 17.1 Prices charged by the supplier for goods delivered and

services performed under the contract shall not vary from the

prices quoted by the supplier in his bid, with the exception of

any price adjustments authorized or in the purchaser’s request

for bid validity extension, as the case may be.

18. Variation 18.1 In cases where the estimated value of the envisaged changes

in purchase does not vary more than 15% of the total value of

the goods or render the services as such. In cases of

measurable quantities, the contractor may be approached to

reduce the unit price, and such offers may be accepted

provided that there is no escalation in price.

19. Assignment 19.1 The supplier shall not assign, in whole or in part, its obligations

to perform under the contract, except with the purchaser’s prior

written consent.

20. Subcontracts 20.1 The supplier shall notify the purchaser in writing of all

subcontracts awarded under this contracts if not already

specified in the bid. Such notification, in the original bid or later,

shall not relieve the supplier from any liability or obligation

under the contract.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

21. Delays in the 21.1 Delivery of the goods and performance of services shall be

made by the supplier in accordance with the time schedule

supplier’s prescribed by the purchaser in the contract.

performance

21.2 If at any time during performance of the contract, the supplier

or its subcontractor(s) should encounter conditions impeding

timely delivery of the goods and performance of services, the

supplier shall promptly notify the purchaser in writing of the fact

of the delay, its likely duration and its cause(s). As soon as

practicable after receipt of the supplier’s notice, the purchaser

shall evaluate the situation and may at his discretion extend

the supplier’s time for performance, with or without the

imposition of penalties, in which case the extension shall be

ratified by the parties by amendment of contract.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

21.3 The right is reserved to procure outside of the contract small

quantities or to have minor essential services executed if an

emergency arises, the supplier’s point of supply is not situated

at or near the place where the goods are required, or the

supplier’s services are not readily available.

21.4 Except as provided under GCC Clause 25, a delay by the

supplier in the performance of its delivery obligations shall

render the supplier liable to the imposition of penalties,

pursuant to GCC Clause 22, unless an extension of time is

agreed upon pursuant to GCC Clause 22.2 without the

application of penalties.

21.5 Upon any delay beyond the delivery period in the case of a

goods contract, the purchaser shall, without cancelling the

contract, be entitled to purchase goods of a similar quality and

up to the same quantity in substitution of the goods not

supplied in conformity with the contract and to return any goods

delivered later at the supplier’s expense and risk, or to cancel

the contract and buy such goods as may be required to

complete the contract and without prejudice to his other rights,

be entitled to claim damages from the supplier.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

22. Penalties 22.1 Subject to GCC Clause 25, if the supplier fails to deliver any or

all of the goods or to perform the services within the period(s)

specified in the contract, the purchaser shall, without prejudice

to its other remedies under the contract, deduct from the

contract price, as a penalty, a sum calculated on the delivered

price of the delayed goods or unperformed services using the

current prime interest rate calculated for each day of the delay

until actual delivery or performance. The purchaser may also

consider termination of the contract pursuant to GCC Clause

24. Termination 23.1 The purchaser, without prejudice to any other remedy for

breach of contract, by written notice of default sent to the

for default supplier, may terminate this contract in whole or in part:

(a) if the supplier fails to deliver any or all of the goods

within the period(s) specified in the contract, or within

any extension thereof granted by the purchaser

pursuant to GCC Clause 21.2;

(b) if the supplier fails to perform any other obligation(s)

under the contract; or

(c) if the supplier, in the judgment of the purchaser, has

engaged in corrupt or fraudulent practices in

competing for or in executing the contract.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

23.2 In the event the purchaser terminates the contract in whole or

in part, the purchaser may procure, upon such terms and in

such manner, as it deems appropriate, goods, works or

services similar to those undelivered, and the supplier shall be

liable to the purchaser for any excess costs for such similar

goods, works or services. However, the supplier shall continue

performance of the contract to the extent not terminated.

23.3 Where the purchaser terminates the contract in whole or in part,

the purchaser may decide to impose a restriction penalty on the

supplier by prohibiting such supplier from doing business with

the public sector for a period not exceeding 10 years.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

23.4 If a purchaser intends imposing a restriction on a supplier or

any person associated with the supplier, the supplier will be

allowed a time period of not more than fourteen (14) days to

provide reasons why the envisaged restriction should not be

imposed. Should the supplier fail to respond within the

stipulated fourteen (14) days the purchaser may regard the

supplier as having no objection and proceed with the

restriction.

23.5. Any restriction imposed on any person by the purchaser will, at

the discretion of the purchaser, also be applicable to any other

enterprise or any partner, manager, director or other person

who wholly or partly exercises or exercised or may exercise

control over the enterprise of the first-mentioned person, and

with which enterprise or person the first-mentioned person, is

or was in the opinion of the purchaser actively associated.

23.6 If a restriction is imposed, the purchaser must, within five (5)

working days of such imposition, furnish the National Treasury,

with the following information:

(i) the name and address of the supplier and / or person.

restricted by the purchaser;

(ii) the date of commencement of the restriction

(iii) the period of restriction; and

(iv) the reasons for the restriction.

These details will be loaded in the National Treasury’s central

database of suppliers or persons prohibited from doing

business with the public sector.

23.7. If a court of law convicts a person of an offence as

contemplated in sections 12 or 13 of the Prevention and

that his delay in performance or other failure to perform his

obligations under the contract is the result of an event of force

majeure.

25.2 If a force majeure situation arises, the supplier shall promptly

notify the purchaser in writing of such condition and the cause

thereof. Unless otherwise directed by the purchaser in writing,

the supplier shall continue to perform its obligations under the

contract as far as is reasonably practical, and shall seek all

reasonable alternative means for performance not prevented

by the force majeure event.

26. Termination 26.1 The purchaser may at any time terminate the contract by giving

written notice to the supplier if the supplier becomes bankrupt

for insolvency or otherwise insolvent. In this event, termination will be without

compensation to the supplier, provided that such termination

will not prejudice or affect any right of action or remedy, which

has accrued or will accrue thereafter to the purchaser.

27. Settlement of 27.1 If any dispute or difference of any kind whatsoever arises

between the purchaser and the supplier in connection with or

to resolve amicably such dispute or difference by mutual

consultation.

TN042-2026: supply and delivery of electrical motors and pumps for dawid kruiper municipality

27.2 If, after thirty (30) days, the parties have failed to resolve their

dispute or difference by such mutual consultation, then either

the purchaser or the supplier may give notice to the other

party of his intention to commence with mediation. No

mediation in respect of this matter may be commenced

unless such notice is given to the other party.

27.3 Should it not be possible to settle a dispute by means of

mediation, it may be settled in a South African court of law.

27.4 Notwithstanding any reference to mediation and/or court

proceedings herein,

(a) the parties shall continue to perform their respective

obligations under the contract unless they otherwise

agree; and

(b) the purchaser shall pay the supplier any monies due

the supplier for goods delivered and / or services

rendered according to the prescripts of the contract.

Government procurement: general conditions of contract

Dawid Kruiper: Republic of South Africa

28. Limitation of 28.1 Except in cases of criminal negligence or willful misconduct,

and in the case of infringement pursuant to Clause 6;

(a) the supplier shall not be liable to the purchaser,

whether in contract, tort, or otherwise, for any indirect

or consequential loss or damage, loss of use, loss of

production, or loss of profits or interest costs, provided

that this exclusion shall not apply to any obligation of

the supplier to pay penalties and/or damages to the

purchaser; and

(b) the aggregate liability of the supplier to the purchaser,

whether under the contract, in tort or otherwise, shall

not exceed the total contract price, provided that this

limitation shall not apply to the cost of repairing or

replacing defective equipment.

29. Governing 29.1 The contract shall be written in English. All correspondence

and other documents pertaining to the contract that is

Bid document must be completed and returned without alteration, modification, deletion, editing or formatting by closing date and time. Incomplete or altered documents will not be considered. Lowest or only bid not necessarily accepted. Bids per fax or email not accepted; only original signed document accepted. Required forms: Summary of items and bid price, MBD 1, MBD 4, MBD 6.1, MBD 7.1, MBD 8, MBD 9. Bidders must be registered on National Treasury's Central Supplier Database (CSD) with proof submitted. Municipal account copy not older than 3 months and not in arrears >90 days on date of award. If not liable for municipal services, sworn affidavit and/or valid lease agreement required.

Contact details: Telephone Number, Cellphone Number, Email address, CSD Registration Nr MAAA, Locality (where the business is located)