Broad-Based Black Economic Empowerment Act (B-BBEE Act)
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Documents available on tender detail page
Tender Type
Request for Information
Delivery Location
25 Valleyview Road, New Germany - Pinetown - Durban - 3610
Organization Type
GOVERNMENT
Published
30 Sept 2026
OCDS Reference
ocds-9t57fa-172121
ESKOM requires the design, manufacture, transport, installation and commissioning of outdoor 88kV-132kV mixed technology gas insulated switchgear (mtgis) of hybrid, dead-tank compact design, in accordance with ESKOM specification 240-59030436, including training for ESKOM staff in the kwazulu-natal operating unit. The equipment covers feeder/transformer bays, bus coupler/section units for double and single busbar systems, rated at 2500 a with short-time currents of 31.5 Ka (66kv) or 40 ka (88kv and 132kv). Bidders must comply with strict technical, corrosion, testing and certification requirements, and the closing date is 30 november 2026 at 10:00.
Closing: 30 November 2026 at 10:00. Submission method and address not stated in the available document.
Scope: Design, manufacture, transport, install and commission outdoor 88kV-132kV MTGIS (hybrid, dead-tank compact) per Eskom spec 240-59030436, plus staff training in KwaZulu-Natal.
Technical: Equipment must meet Eskom drawing D-DT-6053; voltage 66/88/132kV, rated current 2500 A, short-time current 31.5 kA (66kV) or 40 kA (88/132kV), creepage 31 mm/kV, 3-pole, 110 V DC control, spring stored energy operation, composite insulation, pollution class very heavy.
Compliance: Corrosion protection per SANS 121 and Eskom spec SCSSCAAP9; standard and test spec DSP34-378; inspection and Eskom release note required; all items indelibly marked with manufacturer's trademark and part number.
Returnables: The document does not list mandatory forms; bidders should expect standard Eskom tender forms (e.g., SBD/MBD) and any required declarations, but none are specified in the available text.
Eligibility: No CSD, tax clearance, B-BBEE, CIDB, or financial thresholds are stated in the available document.
Special conditions: No briefing, site visit, or disqualifying conditions are mentioned in the available document.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Return to this tender’s issuing organisation, province, or category.
Continue with tenders sharing this issuer, category, or province.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Tools and research to help you assess opportunities.
Check the registered grade against the tender conditions, or estimate a possible grade. Check CIDB registration · Estimate a CIDB grade.
Date & Time
Monday, 30 November 2026 - 10:00
Venue
null
Categories
Request for Information
25 Valleyview Road, New Germany - Pinetown - Durban - 3610
Tenders in this industry often require registration with these bodies.
Recommended Certifications
Having these can improve your winning chances: Good Manufacturing Practice (GMP), SABS Product Certification, NRCS Certification
AI Document Analysis Stages
Description
30 Sept
2026
Tender Published
Tender was published
30 Nov
2026
Closing Date
Tender closing date
These references help suppliers understand the public-procurement framework around this opportunity. They are generated from the tender category, issuing organisation type and procurement context.
These rules commonly apply to South African public-sector procurement.
Act 53 of 2003
Provides the empowerment-compliance context often used in public-sector supplier evaluation.
Relevant because this is a South African public-sector procurement opportunity.
Act 108 of 1996 (s217)
This is general procurement context, not legal advice. Always verify requirements in the official tender documents and issuing authority notices.
E-tendering Help Manual for supplier.pdf
Eskom requires the design, manufacture, transport, installation and commissioning of outdoor 88kV–132kV Mixed Technology GI Switchgear (MTS) of the hybrid, dead-tank compact design, in accordance with Eskom specification #240-59030436, together with training for Eskom staff in the KwaZulu-Natal Operating Unit.
240-56030436 MTGIS STANDARD.pdf
Eskom requires the design, manufacture, transport, installation and commissioning of outdoor 88 kV–132 kV Mixed Technology Gas Insulated Switchgear (MTS) of the 'hybrid', dead-tank compact design, in accordance with specification 240-59030436, together with training of Eskom staff in the KwaZulu-Natal Operating Unit. The switchgear is intended for substation applications up to and including 132 kV nominal system voltage.
DDT 6053 MTGIS BUYERS GUIDE.pdf
Eskom requires the design, manufacture, transport, installation and commissioning of outdoor 88 kV–132 kV Mixed Technology Gas Insulated Switchgear (MTGIS) of hybrid dead-tank compact design, supplied as combined bay units and supported by training of Eskom staff in the KwaZulu-Natal Operating Unit. The units must comply with Eskom specification #240-59030436 and Eskom drawing D-DT-6053.
Request for Information (RFI) -Mixed Technology GI Switchgear.pdf
Eskom requires the design, manufacture, transport, installation and commissioning of outdoor 88kV–132kV Mixed Technology Gas Insulated Switchgear (MTS) of hybrid, dead-tank compact design, plus training of Eskom staff in the KwaZulu-Natal Operating Unit. The switchgear is to replace auto-trip switch protection at constrained substations, with units required at Umgababa, Mtwalume and Montreaux 88kV substations and one spare unit.
MTGIS Scope of Work.pdf
Eskom requires the design, manufacture, transport, installation and commissioning of outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTGIS) of hybrid, dead-tank compact design, plus training for Eskom staff in the KwaZulu-Natal Operating Unit. Units are required for Umgababa, Mtwalume and Montreaux 88kV substations, with one spare unit. Responses are sought through RFI E3621DXKZNOU, closing 30 November 2026 at 10:00 (GMT+0000).
E-Tenderers E-Tendering Training Acknowledgement Form.pdf
Eskom requires outdoor 88kV–132kV Mixed Technology GI Switchgear (MTS) of hybrid, dead-tank compact design to be designed, manufactured, transported, installed and commissioned in accordance with Eskom specification 240-59030436, plus training of Eskom staff in the KwaZulu-Natal Operating Unit.
To download these documents and access AI-powered analysis, visit the main tender page.
Organization
EskomWin Eskom tenders with AI Tender Matching, technical document analysis, compliance scoring, and structured bid support for energy and engineering contracts.
Matched by category & region
Free guidance to prepare before you bid
Not sure if your business is ready for this tender? Check CSD, CIDB, and B-BBEE requirements, run a readiness assessment, and move from opportunity to submission.
Open Supplier Readiness HubNot enough data available to generate an estimate for this tender type.
We refine every tender document through these stages so you can brief your team and prepare your bid with confidence. Anything marked as "in progress" will be upgraded automatically — no action required from you.
Eskom Distribution in KwaZulu-Natal has 88/11kV transformers protected by auto-trip switches (ATS) that rely on upstream 88kV breakers to clear faults. This outdated technology poses a high protection risk. Space constraints at substations prevent conventional HV breakers, CTs, isolators and control plant; substations also lack control rooms. The proposal is to replace the ATS with Mixed Technology Gas Insulated Switchgear (MTGIS) to protect transformers and the network.
Eskom's intent is to obtain market information on MTGIS to make an informed decision on pursuing this technology. Challenges include lack of information on design, operations, maintenance, costs and lead-times. The desired outcome is to install and commission this technology at various substations, developing skills while maintaining a reliable network.
Purpose of this RFI:
This RFI is a stand-alone information-gathering and market-testing exercise, not a tender.
Important Dates
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Closing date: 30 November 2026 at 10H00 (South African Standard Time)
No briefing or site visit is mentioned.
Contact Information
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Eskom Representative
Procurement Manager (signatory on response sheet)
Submission address: https://etendering.eskom.co.za
Submission Guidelines
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Submission method: electronic only via the Eskom E-Tendering site at https://etendering.eskom.co.za
Returnable documents:
Evaluation Criteria
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)This is a Request for Information (RFI), not a formal tender. Responses are used to gather market information and shape a future RFP.
Technical Specifications
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Scope: Design, manufacture, transport, install and commission outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTGIS) of the 'hybrid', dead-tank compact design, in accordance with Eskom specification #240-59030436, and provide training to Eskom staff in the KwaZulu Natal Operating Unit.
Quantities and locations:
Background: The MTGIS will replace outdated auto-trip switches (ATS) that protect 88/11kV transformers. Space constraints at substations prevent conventional HV breakers, CTs, isolators and control plant; substations also lack control rooms.
Key submission requirements:
Methodology
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Technical approach: Describe technical capability with MTGIS, including innovative methodologies or technologies used. Provide details on ability to meet Eskom's specific requirements, such as regulatory compliance and technology availability.
Experience & Qualifications
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdfCompany profile and experience:
Proposed team and resources:
Pricing Schedule
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Provide a preliminary high-level cost estimate for the scope of work, including assumptions and exclusions. This estimate is for informational purposes only and will not be binding during the tender stage. Also provide the lead time for the outdoor 88kV-132kV Mixed Technology GI Switchgear (MTS).
Financial Requirements
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Preliminary high-level cost estimate:
Compliance Requirements
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Compliance and certifications:
Section
Source: Request for Information (RFI) -Mixed Technology GI Switchgear.pdf (EOI)Eskom Representative: Danny Rajkumar, Email: [email protected], Telephone: 031 710 5735.
Important Dates
Source: E-Tenderers E-Tendering Training Acknowledgement Form.pdf (unknown)Closing date: 27 January 2025
Submission Guidelines
Source: E-Tenderers E-Tendering Training Acknowledgement Form.pdf (unknown)Returnable documents: the E-Tendering Training Acknowledgement Form (Annexure) must be completed and submitted with the bid. The form confirms the bidder has self-trained on the e-Tendering Solution via the Noddy Guide, video, or clarification meeting, and is able to operate the system. It must be signed by an authorised representative.
Submission method: via the Eskom e-Tendering Solution.
Technical Specifications
Source: E-Tenderers E-Tendering Training Acknowledgement Form.pdf (unknown)The RFI covers the design, manufacture, transport, installation and commissioning of outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTS) of the 'hybrid', dead-tank compact design, in accordance with Eskom specification #240-59030436, including training for Eskom staff in the KwaZulu Natal Operating Unit.
Description
Source: 240-56030436 MTGIS STANDARD.pdfEskom requires the design, manufacture, transport, installation and commissioning of outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTS) of the 'hybrid', dead-tank compact design, in accordance with Eskom specification 240-59030436, and training of Eskom staff in the KwaZulu Natal Operating Unit. The switchgear combines air-insulated and gas-insulated technologies and is intended for use in substations with nominal voltages up to 132 kV.
Submission Guidelines
Source: 240-56030436 MTGIS STANDARD.pdf (unknown)Returnable documents:
Submission method and closing time are not stated in the document.
Evaluation Criteria
Source: 240-56030436 MTGIS STANDARD.pdf (unknown)Technical preconditions:
No commercial evaluation criteria (price, preference points, minimum qualifying score) are stated in the document.
Technical Specifications
Source: 240-56030436 MTGIS STANDARD.pdf (unknown)Scope:
Technical requirements:
Methodology
Source: 240-56030436 MTGIS STANDARD.pdf (unknown)Methodology requirements:
Quality Management
Source: 240-56030436 MTGIS STANDARD.pdfQuality requirements:
Compliance Requirements
Source: 240-56030436 MTGIS STANDARD.pdf (unknown)Compliance with the following standards and specifications is required:
No specific B-BBEE, CIDB, CSD, or tax compliance requirements are stated in the document.
Health & Safety
Source: 240-56030436 MTGIS STANDARD.pdfHealth and safety requirements:
Contractual Terms
Source: 240-56030436 MTGIS STANDARD.pdfThe document is a technical standard, not a contract. It specifies that the standard covers design, manufacture, testing, supply, delivery, storage, installation, pre-commissioning and guarantee of the switchgear. No specific contractual terms (duration, termination, penalties) are stated.
Special Conditions
Source: 240-56030436 MTGIS STANDARD.pdf (unknown)Special conditions:
Section
Source: 240-56030436 MTGIS STANDARD.pdfTechnical preconditions: designs must be type tested per SANS 62271-205, environmentally friendly designs considered, outdoor insulators must meet KIPTS test procedure, offers must include completed Technical Schedules A and B, and compliance with referenced health, safety, quality and operating standards is required. No commercial evaluation criteria stated.
Description
Source: DDT 6053 MTGIS BUYERS GUIDE.pdfEskom requires the design, manufacture, transport, installation and commissioning of outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTGIS) of hybrid, dead-tank compact design, per Eskom specification 240-59030436, plus training for Eskom staff in the KwaZulu Natal Operating Unit.
Equipment covered (per Eskom drawing D-DT-6053):
Technical Specifications
Source: DDT 6053 MTGIS BUYERS GUIDE.pdf (unknown)Eskom requires the design, manufacture, transport, installation and commissioning of outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTGIS) of hybrid, dead-tank compact design, per Eskom specification 240-59030436, plus training for Eskom staff in the KwaZulu Natal Operating Unit.
Equipment covered (per Eskom drawing D-DT-6053):
Compliance Requirements
Source: DDT 6053 MTGIS BUYERS GUIDE.pdf (unknown)Corrosion protection must comply with SANS 121 and Eskom specification SCSSCAAP9.
Standard specification: DSP34-378.
Testing and certification per DSP 34-378.
Inspection and Eskom release note required.
All items must carry an indelible manufacturer's trademark and part number.
Requirements
Source: DDT 6053 MTGIS BUYERS GUIDE.pdf (unknown)Corrosion protection must comply with SANS 121 and Eskom specification SCSSCAAP9.
Standard specification: DSP34-378.
Testing and certification per DSP 34-378.
Inspection and Eskom release note required.
All items must carry an indelible manufacturer's trademark and part number.
Description
Source: E-tendering Help Manual for supplier.pdfThe eTendering system is a web-based platform that replaces manual submission of tender documents at Eskom offices. Suppliers must register and verify their details before access. Access is via the TenderBulletin public website or directly at eTendering.eskom.co.za. A CSD number is required for access.
Important Dates
Source: E-tendering Help Manual for supplier.pdf (TENDER)Closing date: 30 November 2026 at 10:00 (from tender record). No other dates are stated.
Contact Information
Source: E-tendering Help Manual for supplier.pdf (TENDER)For system problems, contact the buyer responsible for the published tender. No specific contact details are provided.
Submission Guidelines
Source: E-tendering Help Manual for supplier.pdf (TENDER)Submission is electronic only via the Eskom eTendering system at https://eTendering.eskom.co.za. Bidders must register and verify their email and cellphone (OTP) before access. A CSD number is required to access the system.
Upload documents under the correct category (Technical, Commercial, Finance, etc.). Each file must not exceed 50MB; total uploads must not exceed 900MB. Finalise by clicking 'Finalize Submission' then 'Finalise and Close Submission'. A confirmation email with the submission ID is sent; keep it for reference.
Returnable documents: none specified beyond the upload categories.
Evaluation Criteria
Source: E-tendering Help Manual for supplier.pdf (TENDER)No evaluation criteria are stated in the document. The document only notes that 'closed tenders' are sent directly to suppliers who meet selection and evaluation criteria.
Methodology
Source: E-tendering Help Manual for supplier.pdf (TENDER)Submission process: After logging in and verifying OTP, select the tender reference number, click 'Create New Submission', add files by naming them, selecting file type (Technical, Commercial, Finance, etc.), and uploading. Files must not exceed 50MB each, with a total limit of 900MB. Finalize by clicking 'Finalize Submission', then confirm with 'Finalise and Close Submission'. A confirmation email with submission ID is sent; save it for future reference. Submitted tenders can be viewed under 'My Submissions'.
Compliance Requirements
Source: E-tendering Help Manual for supplier.pdf (TENDER)A CSD (Central Supplier Database) number is required to access the eTendering system.
Special Conditions
Source: E-tendering Help Manual for supplier.pdf (TENDER)Registration requires completing all fields, with contact number starting with '+' (e.g., +27), and completing a captcha. Email verification is required; a resend option is available. After verification, login with email and password, then enter the OTP sent to cellphone/email.
To edit registration details (name, organization, CSD, cell phone), use 'Edit Registration' from the dropdown, update information, and click 'Update'.
To log out, click 'Log out' from the dropdown next to your name.
Password reset: Click 'Forgot your password', enter alternative email, receive confirmation, click link or 'Reset Password' button, enter new password, confirm, then enter OTP sent to cellphone/email. Successful reset leads to confirmation screen.
The system is compatible with most web browsers, but Microsoft Edge is recommended.
Section
Source: E-tendering Help Manual for supplier.pdfNo evaluation criteria are stated. The document only mentions that 'closed tenders' are sent directly to suppliers who meet selection and evaluation criteria.
Description
Source: MTGIS Scope of Work.pdfEskom requires design, manufacture, transport, installation and commissioning of outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTGIS) of hybrid, dead-tank compact design, per specification #240-59030436, plus staff training.
Submission Guidelines
Source: MTGIS Scope of Work.pdf (unknown)Returnable documents: none specified in the RFI. Responses must address the key requirements listed in the scope of work.
Evaluation Criteria
Source: MTGIS Scope of Work.pdf (unknown)No eligibility criteria or evaluation methodology specified. This is a Request for Information; responses are used to gauge market capability and interest.
Technical Specifications
Source: MTGIS Scope of Work.pdf (unknown)Scope: design, manufacture, transport, install and commission outdoor 88kV-132kV Mixed Technology Gas Insulated Switchgear (MTGIS) of hybrid, dead-tank compact design, per Eskom specification #240-59030436, and provide training to Eskom staff.
Quantities and locations:
Compliance: All proposed services, technologies and systems must comply with Eskom standard 240-56030436 (Distribution Groups Specific Requirements for 132kV Mixed Technology Gas Insulated Switchgear).
Methodology
Source: MTGIS Scope of Work.pdf (unknown)Describe technical capability with MTGIS and ability to meet Eskom's specific requirements. Describe resources (technology, equipment, infrastructure) to be deployed for successful project delivery.
Experience & Qualifications
Source: MTGIS Scope of Work.pdfProvide company profile: history, size, core competencies. Demonstrate relevant MTGIS experience with examples of past projects and measurable outcomes. Provide at least three client references for similar projects, with contact details for verification. Provide details of the proposed team, including qualifications, experience and roles.
Financial Requirements
Source: MTGIS Scope of Work.pdf (unknown)Provide a preliminary high-level cost estimate for the scope of work, including assumptions and exclusions. This estimate is for informational purposes only and is not binding at tender stage.
Compliance Requirements
Source: MTGIS Scope of Work.pdf (unknown)List all relevant certifications, licenses and accreditations. Compliance with Eskom technical standard 240-56030436 is mandatory.
Requirements
Source: MTGIS Scope of Work.pdf (unknown)List all relevant certifications, licenses and accreditations. All services, technologies and systems must comply with Eskom standard 240-56030436 (Distribution Groups Specific Requirements for 132kV Mixed Technology Gas Insulated Switchgear).
Sets the constitutional standard for fair, equitable, transparent, competitive and cost-effective public procurement.
Relevant because this is a South African public-sector procurement opportunity.
Act 5 of 2000
Covers preferential procurement and preference-point systems used in public tenders.
Relevant because this is a South African public-sector procurement opportunity.
Act 12 of 2004
Supports anti-corruption controls and supplier integrity in procurement processes.
Relevant because this is a South African public-sector procurement opportunity.
Act 28 of 2024
Provides the national framework for public procurement across government.
Relevant because this is a South African public-sector procurement opportunity.
Act 2 of 2000
Supports access to tender records, award decisions and public-sector procurement information.
Relevant because this is a South African public-sector procurement opportunity.
Act 3 of 2000
Supports lawful, reasonable and procedurally fair administrative tender decisions.
Relevant because this is a South African public-sector procurement opportunity.
Address
25 Valleyview Road, New Germany - Pinetown - Durban - 3610
Source confidence
High source confidence
Official source
eTenders.gov.za
Documents found
6
Last checked
09 Nov 2026
AI status
Enhanced
Data conflicts
None detected
This tender has strong source evidence, including source metadata and supporting tender information synced from the government tender portal.
Tenders SA is not the issuing authority. All tenders are automatically synced from the official government tender portal. Always confirm final submission details, closing dates, briefing sessions, eligibility requirements, and documents on the official government portal before applying.
Key Personnel
Provinces Active
Industries
Learn how to submit a winning bid with these related articles
Made in SA: Explore the strategic importance of localization in manufacturing tenders and learn how your fabrication SMME can qualify for high-value industrial contracts.
A masterguide to the legal and policy frameworks that mandate the use of South African products in Gauteng's government procurement.
A guide for local manufacturers to secure contracts for school uniforms, hospital linens, and protective clothing for Gauteng's public sector.
Win government goods supply contracts including furniture, stationery, uniforms, and equipment. Local content requirements and NRCS certification explained.
💡 Want more tendering tips and strategies?
Explore Our BlogGet deep intelligence on Other manufacturing. Unlock full pricing strategies, bid frequency, and historical win rates.