Procurement activity across supplies tenders. The award rate is the share of concluded tenders (awarded plus closed) that resulted in a published contract award.
ESKOM requires the supply and delivery of critical mill classifier blade spares, fabricated from bennox SS10/200, to kriel power station main stores on an as-and-when-required basis over five years, with the contract split among multiple contractors. Bidders must first pass three mandatory technical criteria — a manufacturer's signed declaration on bennox SS10/200 and the use of qualified welders, a documented welding procedure, and at least three welder qualification certificates — before functionality is scored out of 100 against a 70% minimum threshold. Price and specific goals are then scored on the 80/20 preference point system, with 100% local content as an objective criterion and a reverse e-auction applying. Bids close on 19 october 2026 at 10h00 and must be uploaded to the ESKOM e-tendering site with every disqualifiable returnable complete and signed at closing.
Closing and submission: 19 october 2026 at 10h00, electronic submission only via the ESKOM tender bulletin e-tendering site; NO hard copies, NO zip files, 500 mb per document and 4 gb per submission, submission status must show complete, and late bids are rejected. Mandatory technical criteria (pass/fail): a signed manufacturer's declaration that bennox SS10/200 requirements are met and qualified welders will fabricate and assemble the vanes, a documented welding procedure, and proof of welder qualification of at least 3 certificates — a single "NO" eliminates the bidder. Functionality threshold: scored out of 100 with a minimum qualifying score of 70; bidders below 70 are disqualified. Weld overlay capability or a partnership for IT carries 23%, proven supply of bennox SS10/200 in the last 5 years carries 30%, and customer satisfaction surveys carry 15%. Price and preference points: 80/20 system — price out of 80 points and specific goals out of 20 points, ranked highest to lowest. B-bbee levels score level 1 = 20, level 2 = 18, level 3 = 14, level 4 = 12, level 5 = 8, level 6 = 6, level 7 = 4, level 8 = 2 and non-compliant = 0; missing evidence scores zero but does not disqualify. Local content of 100% is an objective criterion, a reverse e-auction applies, and the contract will be split among multiple contractors. Disqualifiable returnables due at closing: annexures a to h and j (including sbd 1, sbd 4 and sbd 6.2 With schedules g1 to g4) plus the nec supply contract completed in full without prices; anything missing, incomplete or unsigned at closing disqualifies the bid. Sbd 6.1 (Annexure i) is non-disqualifying and may be corrected within 5 working days of a written request. Evidence required before contract award: csd registration, latest approved annual financial statements of the bidding company (drafts and management accounts are not accepted), signed public interest score and ita34c copies for unaudited south african entities, coida letter of good standing, OHS plan, baseline risk assessment and ceo-signed OHS policy, qms and cqp, environmental policy and aspects register, and a valid b-bbee certificate or sworn affidavit. Clarification meeting and queries: non-compulsory ms teams meeting on 01 october 2026 at 09h00 (link https://teams.microsoft.com/meet/333411536192166?p=k8XB7QbNaceRTe0X5I); Bidders must confirm attendance with the ESKOM representative giving each attendee's name, position and contact details, and written queries must reach the ESKOM representative by 5 working days before the submission deadline.
Browse supplies opportunities across South Africa
Expert guides and insights for supplies tendering
Learn everything you need to know about beyond the lowest bid: crafting a profitable & compliant pricing strategy for cleaning tenders in south africa (2026) for South African businesses. This comprehensive guide covers requirements, step-by-step processes, and how to use Tenders-SA.org to find relevant opportunities.
Learn everything you need to know about unlocking larger contracts: your 2026 guide to cidb registration & leveraging grading for cleaning tenders in south africa for South African businesses. This comprehensive guide covers requirements, step-by-step processes, and how to use Tenders-SA.org to find relevant opportunities.
How small office supplies, stationery, and general goods suppliers use Joint Ventures to win government procurement contracts by combining inventory with B-BBEE credentials.
How mechanical and electrical engineers, contractors, and consultants can win public sector contracts in South Africa — HVAC, plumbing, fire systems, electrical infrastructure, ECSA registration, CIDB ME designation, and tender documentation essentials.
Comprehensive step-by-step guide to Private Security Industry Regulatory Authority (PSIRA) registration. Requirements for security companies, officers, grades A-E, and how PSIRA compliance unlocks government security tenders and guarding contracts.
Everything South African general contractors need to know about how to write a winning tender proposal without an in-house bid team in gauteng — covering CSD, BBBEE, step-by-step processes, common disqualification mistakes, and how Tenders-SA.org helps you find and win relevant contracts in Gauteng.
This notice announces the awards for three tenders: RFP04-2026 for re-gravelling of roads in mkhuze game reserve, RFP05-2026 for supply and delivery of landcare PPE, and RFP06-2026 for supply and delivery of landcare tools and equipment. The tenders were open to suppliers and contractors, with a closing date of 22 january 2027. NO briefing session was held.
Returnable documents:
ESKOM requires the supply and delivery of mill plant couplings, rubber couplings, spring bibby couplings, coupling bolts and coupling grease on an as-when-required basis for a contract period of five years. Bidders must submit a signed acknowledgement of eskom's she rules (annexure b), a valid coida letter of good standing, an OHS policy signed by the ceo/md, and a baseline OHS risk assessment at tender closing, as these are disqualifiable if missing. The most consequential consideration is meeting the mandatory safety returnables at closing, as failure to do so will result in disqualification.
Returnable documents at tender closing (disqualifiable if not submitted): - annexure b: signed acknowledgement of eskom's she rules and requirements. - Valid letter of good standing (coida or equivalent), with expiry date not later than the tender closing date. - OHS policy signed by ceo/md, complying with OHS act section 7. - Baseline OHS risk assessment (bra) including the methodology used. Returnables required prior to contract award (non-disqualifiable at closing): - occupational health and safety plan addressing the scope of work OHS risks, aligned with the health and safety specification. - She organisation within the company: responsibility and accountability. - She incident management. - PPE (personal protective equipment). - Emergency planning and fire risk management. - Vehicle and driver behaviour safety. - Competency certificates, training, statutory appointments. - Communication and awareness. - Life saving rules. - She plan. - Medical fitness certificates and cost for safety measures.
ESKOM distribution (gauteng cluster) requests bidders who submitted tenders under enquiry e1655dxgpr for the supply and delivery of various production equipment on an as-and-when-required basis for five years to extend the validity of their offers to 30 april 2027. The original validity expires on 28 october 2026. Bidders must sign and return the acknowledgement section of the letter to confirm the extension, which maintains original pricing and all other terms and conditions.
Bidders must confirm the extension of their tender validity by signing and returning the acknowledgement section of the letter. The extension maintains the original pricing and all other terms and conditions as tendered; IT is not an invitation to amend the price, scope, or delivery period.
Drakenstein municipality is inviting bids for the supply and delivery of new building materials for a contract period up to 30 june 2030. The contract will be awarded under the 80/20 preferential procurement system, and bidders must attend a compulsory clarification meeting on 5 october 2026 or be disqualified. Bids close on 20 october 2026 at 10:00, and must be submitted in a sealed envelope marked with the tender number into tender box 1 at the civic centre in paarl.
Submission method: sealed envelope, clearly marked with the tender number, deposited in tender box 1 in the foyer of the civic centre, berg river boulevard, paarl, 7620. Tender box hours: monday to thursday 08:00–16:45, friday 08:00–15:30 (excluding weekends and public holidays). Bids must be submitted on the official bid documentation provided by the municipality. Bids must remain valid for a minimum of 260 days after bid closing. Telegraphic, telephonic, telex, facsimile, e-mailed or late tenders will not be accepted. The council reserves the right not to accept the lowest, only or any bid and may accept any part of the bid. The successful bidder will be required to fill in and sign a written contract form. Returnable documents: mbd 1 (part b) – tax status declaration; proof of registration on drakenstein municipality's supplier database; any other forms specified in the tender document. Disqualification risks: failure to attend the compulsory clarification meeting, late arrival at the meeting, submission in an unsealed envelope, missing tender number, or failure to deposit in tender box 1 before closing time.
ESKOM requires the supply and delivery of raw rubber chutes spares on an as-and-when-required basis for a five-year period, with deliveries to matla power station. Bidders must be prepared to meet the closing deadline of 30 october 2026 at 08:00. The most consequential consideration is ensuring timely submission before the closing time, as NO other evaluation or compliance details are provided in the available information.
Returnable documents: the completed environmental contractors assessment form (annexure a) must be submitted with the bid. NO other returnable forms are specified in the provided document.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Stay within this scope while viewing other publication states.
Browse categories with current opportunities in this area.
Compare tender activity across provinces.
Explore organisations currently publishing tenders.
Stay within this scope while viewing other publication states.
See tenders matched to your company profile — no signup needed.
Company Intelligence →Guides to help you win more tenders